检索结果-内蒙古大学图书馆

Motion Attitude and Aerodynamic Characteristics Research of Flapping Wings Driven by Micro Servoactuator

Journal of Bionic Engineering 2024年第6期21卷 2830-2846页

作者： Tianyou Mao Bosong Duan Bihui Yin Chuangqiang Guo State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin150001China School of Mechanical Engineering Zhejiang UniversityHangzhou310027China

Compared to the traditional flapping-wing structure with single motion mode,a micro servoactuator driven Flapping-Wing Air Vehicle(FWAV)breaks free from the limitations imposed by the motion parameters of the crank-connecting rod *** allows for simultaneous control of wings’position and velocity attitude through pulse width modulation,showcasing unrivaled controllability and promising extensive ***,this method of motion control also brings new challenges to the design of the wings’motion *** study seeks to investigate the relationship between the motion parameters of micro servoactuator driven FWAV and its aerodynamic characteristics,then explore a servo control method that can optimize its thrust-producing *** achieve this,this paper involves the establishment of Amplitude Loss Model(ALM),Flapping Wing Dynamic Model(FWDM),and Power Load Model(PLM),followed by motion capture experiments,dynamic monitoring experiments,and power monitoring *** results show that the proposed modeling method,which fully considers the amplitude loss effect and advanced twisting effect in flapping-wing motion,can accurately calculate thrust,power,and power load,with prediction errors of less than 10%,5%and 13%,*** high-precision model can effectively optimize motion parameters,allowing for better performance of flapping-wing motion.

关键词： Flapping wing Micro servoactuator Motion attitude Aerodynamic model

来源：评论

学校读者我要写书评

暂无评论

3D printing of high-precision and ferromagnetic functional devices

引用

International Journal of Extreme Manufacturing 2023年第3期5卷 646-656页

作者： Zhiyuan Huang Guangbin Shao Dekai Zhou Xinghong Deng Jing Qiao Longqiu Li State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbinHeilongjiang 150001People’s Republic of China

The development of projection-based stereolithography additive manufacturing techniques and magnetic photosensitive resins has provided a powerful approach to fabricate miniaturized magnetic functional devices with complex three-dimensional spatial ***,the present magnetic photosensitive resins face great challenges in the trade-off between high ferromagnetism and excellent printing *** address these challenges,we develop a novel NdFeB-Fe_(3)O_(4) magnetic photosensitive resin comprising 20 wt.%solid loading of magnetic particles,which can be used to fabricate high-precision and ferromagnetic functional devices via micro-continuous liquid interface production *** resin combining ferromagnetic NdFeB microparticles and strongly absorbing Fe_(3)O_(4) nanoparticles is able to provide ferromagnetic capabilities and excellent printing quality simultaneously compared to both existing soft and hard magnetic photosensitive *** established penetration depth model reveals the effect of particle size,solid loading,and absorbance on the curing characteristics of magnetic photosensitive resin.A high-precision forming and ferromagnetic capability of the NdFeB-Fe_(3)O_(4) magnetic photosensitive resin are comprehensively *** is found that the photosensitive resin(NdFeB:Fe_(3)O_(4)=1:1)can print samples with sub-40μm fine features,reduced by 87%compared to existing hard magnetic photosensitive resin,and exhibits significantly enhanced coercivity and remanence in comparison with existing soft magnetic photosensitive resins,showing by an increase of 24 times and 6 times,*** reported NdFeB-Fe_(3)O_(4) magnetic photosensitive resin is anticipated to provide a new functional material for the design and manufacture of next-generation micro-robotics,electromagnetic sensor,and magneto-thermal devices.

关键词： magnetic device magnetic photosensitive resins 3D printing NdFeB Fe_(3)O_(4)

来源：评论

学校读者我要写书评

暂无评论

Hemispherical resonator with low subsurface damage machined by small ball-end fine diamond grinding wheel:A novel grinding technique

引用

Chinese Journal of Aeronautics 2024年第5期37卷 570-585页

作者： Biao QIN Henan LIU Jian CHENG Jinchuan TIAN Jiangang SUN Zihan ZHOU Chuanzhen MA Mingjun CHEN State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China Center for Precision Engineering Harbin Institute of TechnologyHarbin 150001China

As for the ultra-precision grinding of the hemispherical fused silica resonator,due to the hard and brittle nature of fused silica,subsurface damage(SSD)is easily generated,which enormously influences the performance of such ***,ultra-precision grinding experiments are carried out to investigate the surface/subsurface quality of the hemispherical resonator machined by the small ball-end fine diamond grinding *** influence of grinding parameters on the surface roughness(SR)and SSD depth of fused silica samples is then *** experimental results indicate that the SR and SSD depth decreased with the increase of grinding speed and the decrease of feed rate and grinding *** addition,based on the material strain rate and the maximum undeformed chip thickness,the effect of grinding parameters on the subsurface damage mechanism of fused silica samples is ***,a multi-step ultra-precision grinding technique of the hemispherical resonator is proposed based on the interaction influence between grinding depth and feed ***,the hemispherical resonator is processed by the proposed grinding technique,and the SR is improved from 454.328 nm to 110.449 nm while the SSD depth is reduced by 94%from 40μm to 2.379μ*** multi-step grinding technique proposed in this paper can guide the fabrication of the hemispherical resonator.

关键词： Fused silica Ultra-precision grinding Hemispherical resonator Subsurface damage Grinding technique

来源：评论

学校读者我要写书评

暂无评论

Reorientation and obstacle avoidance control of free-floating modular robots using sinusoidal oscillator

引用

Chinese Journal of Aeronautics 2024年第6期37卷 262-275页

作者： Zhiyuan YANG Mingzhu LAI Jian QI Ning ZHAO Xin SUI Jie ZHAO Yanhe ZHU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China School of Mathematics and Statistics Hainan Normal UniversityHaikou 571158China

This paper presents that a serpentine curve-based controller can solve locomotion control problems for articulated space robots with extensive flight phases,such as obstacle avoidance during free floating or attitude adjustment before *** proposed algorithm achieves articulated robots to use closed paths in the joint space to accomplish the above *** snakes,which can shuttle through gaps and adjust their landing posture by swinging their body during gliding in jungle environments,inspired the design of two *** first maneuver generates a rotation of the system by varying the moment of inertia between the joints of the robot,with the magnitude of the net rotation depending on the controller *** maneuver can be repeated to allow the robot to reach arbitrary *** second maneuver involves periodic undulations,allowing the robot to avoid collisions when the trajectory of the global Center of Mass(CM)passes through the *** maneuvers are based on the improved serpenoid curve,which can adapt to redundant systems consisting of different numbers of ***,the simulation illustrates that combining the two maneuvers can help a free-floating chain-type robot traverse complex *** proposed algorithm can be used with similar articulated robot models.

关键词： Collision avoidance Modularrobots Reorientation Free-floating space robots Nonholonomic systems Biologically inspired controllers Serpenoid curve

来源：评论

学校读者我要写书评

暂无评论

Temperature field characteristics of CF/PEEK thermoplastic composites formed by automated fiber placement using hot gas torch with slit structure nozzle

引用

Chinese Journal of Aeronautics 2024年第6期37卷 392-409页

作者： Ziang JIN Shouzheng SUN Sunil Chandrakant JOSHI Zhenyu HAN Hongya FU State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China School of Mechanical and Aerospace Engineering Nanyang Technological UniversitySingapore 639798Singapore

In-situ consolidation forming of high-performance thermoplastic composites by Automated Fiber Placement(AFP)is of significant interest in *** the laying process,the heating temperature has a great influence on the quality of the formed components.A threedimensional heat transfer finite element model of Carbon Fiber(CF)/Polyether Ether Ketone(PEEK)heated by Slit Structure Nozzle Hot Gas Torch(SSNHGT)assisted AFP is *** influence of gas flow rate,heat transfer distance,and laying speed on heating temperature is *** results show that the overall temperature increases and then decreases as the gas flow rate *** the increase in heat transfer distance and laying speed,the overall temperature ***,the gas flow rate has the greatest influence on the temperature of CF/PEEK being heated,followed by the laying speed and finally the heat transfer ***,the model can also be extended to other fiber-reinforced polymer composites formed by hot gas torch assisted AFP,which can guide the optimization of process parameters for subsequent heating temperature control.

关键词： Fiber reinforced plastics Thermoplastics Heating temperature Automated fiber placement CF/PEEK

来源：评论

学校读者我要写书评

暂无评论

Bionic Jumping of Humanoid Robot via Online Centroid Trajectory Optimization and High Dynamic Motion Controller

引用

Journal of Bionic Engineering 2024年第6期21卷 2759-2778页

作者： Xiangji Wang Wei Guo Zhicheng He Rongchao Li Fusheng Zha Lining Sun State Key Laboratory of Robotics and System Harbin Institute of Technology(HIT)Harbin150001China Faculty of Computing Harbin Institute of Technology(HIT)Harbin150001China

The dynamic motion capability of humanoid robots is a key indicator for evaluating their ***,as a typical dynamic motion,is of great significance for enhancing the robot’s flexibility and terrain adaptability in unstructured ***,achieving high-dynamic jumping control of humanoid robots has become a challenge due to the high degree of freedom and strongly coupled dynamic *** idea for this paper originated from the human response process to jumping commands,aiming to achieve online trajectory optimization and jumping motion control of humanoid ***,we employ nonlinear optimization in combination with the Single Rigid Body Model(SRBM)to generate a robot’s Center of Mass(CoM)trajectory that complies with physical constraints and minimizes the angular momentum of the ***,a Model Predictive Controller(MPC)is designed to track and control the CoM trajectory,obtaining the required contact forces at the robot’s ***,a Whole-Body Controller(WBC)is used to generate full-body joint motion trajectories and driving torques,based on the prioritized sequence of tasks designed for the jumping *** control framework proposed in this paper considers the dynamic characteristics of the robot’s jumping process,with a focus on improving the real-time performance of trajectory optimization and the robustness of *** and experimental results demonstrate that our robot successfully executed high jump motions,long jump motions and continuous jump motions under complex working conditions.

关键词： Humanoid robots Jumping motion control Centroid trajectory optimization Optimization and optimal control

来源：评论

学校读者我要写书评

暂无评论

A Rhythmic Motion Control Method Inspired by Board Shoe Racing for a Weight-Bearing Exoskeleton

引用

Journal of Bionic Engineering 2022年第2期19卷 403-415页

作者： Tianshuo Wang Jie Zhao Dongbao Sui Sikai Zhao Yanhe Zhu State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

To ensure the flexible walking of the weight-bearing exoskeleton robot,most researchers control the exoskeleton to follow the wearer’s movements and provide force to maintain the current dynamic ***,due to the limitation of sensing information and computing power,it is difficult for the exoskeleton to provide the wearer reasonable and stable force only based on the dynamic model,especially in switching between swing phase and stance *** by China’s traditional sport named board shoe racing,a walking control method based on the cooperation of the human and the exoskeleton is proposed in this paper for a lower-limb exoskeleton named *** certain conditions,the exoskeleton itself can walk stably depending on the rhythm signals generated by the Central Pattern Generator(CPG).With certain initiative during walking,it can make proper adjustments according to the human *** the help of dynamic simulation software and Genetic Algorithm(GA),the optimized CPG parameters are *** control is introduced to increase the comfort of the *** impedance parameters as well as the CPG parameters are tuned in real time based on *** experiments were conducted with *** results demonstrate that PALExo can effectively assist the wearer walking with a 45-kg payload benefiting from the proposed method.

关键词： Exoskeleton robot Central pattern generator Walking control method

来源：评论

学校读者我要写书评

暂无评论

Hybrid Mapping Method:from Human to Robotic Hands with Dissimilar Kinematics

引用

Journal of Bionic Engineering 2022年第4期19卷 935-952页

作者： Bingchen Liu Li Jiang Shaowei Fan State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150080China

Mapping grasps from human to anthropomorphic robotic hands is an open issue in research,because the master hand and the slave hand have dissimilar *** paper proposes a hybrid mapping method to solve this *** the proposed method,fingers in the master and the slave hands are divided into vital and synergic fingers according to their contribution to the grasping *** tip of the vital finger of the master hand is first mapped to that of the slave hand while ensuring that both are in simultaneous contact with the object to be *** postural synergy theory,joints of the other synergic fingers of the slave hand are then used to generate an anthropomorphic grasping configuration according to the shape of the object to be *** this,a human-guided impedance controller is used to reduce the pre-grasping error and realize compliant interaction with the *** proposed hybrid mapping method can not only generate the posture of the humanoid envelope but can also carry out impedance-adaptive *** was evaluated using simulations and an experiment involving an anthropomorphic robotic slave hand.

关键词： Robotic hand Human-in-the-loop Grasping Postural synergy Impedance control

来源：评论

学校读者我要写书评

暂无评论

Mechanism of material removal and chip formation of alumina dispersion strengthened copper in micro-milling

引用

Frontiers of Mechanical Engineering 2025年第1期20卷 27-43页

作者： Chang LIU Chunya WU Xiguang LI Bo HOU Jiahao WU Ruijiang SUN Mingjun CHEN School of Mechatronics Engineering Harbin Institute of TechnologyHarbin 150001China State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbin 150001China

Alumina dispersion-strengthened copper (ADSC), as a representative particle-reinforced metal matrix composite (PRMMC), exhibits superior wear resistance and high strength. However, challenges arise in their processability because of the non-uniform material properties of biphasic materials. In particular, limited research has been conducted on the reinforcement mechanism and behavior of particles during material cutting deformation of PRMMC with nanoscale particles. In this study, a cutting simulation model for ADSC was established, separating the nanoscale reinforcement particles from the matrix. This model was utilized to analyze the interactions among particles, matrix, and tool during the cutting process, providing insights into chip formation and fracture. Particles with high strength and hardness are more prone to storing stress concentrations, anchoring themselves at grain boundaries to resist grain fibration, thereby influencing the stress distribution in the cutting deformation zone. Stress concentration around the particles leads to the formation of discontinuous chips, indicating that ADSC with high-volume fractions of particle (VFP) exhibits low cutting continuity, which is consistent with the results of cutting experiments. The tool tip that is in contact with particles experiences stress concentration, thereby accelerating tool wear. Cutting ADSC with 1.1% VFP results in tool blunting, which increases the radius of cutting edge from 0.5 to 1.9 μm, accompanied with remarkable coating delamination and wear. Simulation results indicate that the minimum uncut chip thickness increases from 0.04 to 0.07 μm as VFP increases from 0.3% to 1.1%. In conjunction with scratch experiments, MUCT increases with the augmentation of VFP. Computational analysis of the specific cutting force indicates that particles contribute to the material’s size effect. The results of this study provide theoretical guidance for practical engineering machining of ADSC, indicating its g

关键词： alumina dispersion-strengthened copper particle-reinforced metal matrix composites material removal mechanism micro-milling chip formation minimum uncut chip thickness

来源：评论

学校读者我要写书评

暂无评论

Simultaneously improving fabrication accuracy and interfacial bonding strength of multi-material projection stereolithography by multi-step exposure

引用

International Journal of Smart and Nano Materials 2024年第2期15卷 387-404页

作者： Xinghong Deng Guangyu Zhang Yi Mo Zhiyuan Huang Dekai Zhou Jing Qiao Longqiu Li State Key Laboratory of Robotics and System Harbin Institute of TechnologyHarbinChina School of Materials Science and Engineering Harbin Institute of TechnologyHarbinChina

Multi-material additive manufacturing(MMAM)takes full advantage of the ability to arbitrarily place materials of addi-tive manufacturing technology,enabling immense design free-dom and functional print *** MMAM technologies,projection stereolithography(PSL)exhibits a great balance of high resolution and fast printing ***,fabrication accuracy of multi-material PSL is hin-dered by large overcure used to strengthen interfacial bond-ing weakened by chemical affinity and material-exchange *** present a novel multi-step exposure method for multi-material PSL process to overcome this ***,the whole layer is moderately exposed producing over-cure of single-material PSL level to generate *** weakened interfaces are strengthened individually with addi-tional steps of *** multi-step exposure is integrated into the already efficient materials printing order of multi-material PSL *** depth and overcure of photocur-able resins are modeled and *** required to achieve sufficient interfacial bonding of single-material interfaces built through material-exchange process and multi-material interfaces with altering materials printing order is determined with tensile *** channels are used to compare fabrication accuracy of traditional single-step exposure and our multi-step exposure *** method can be widely applied in multi-material PSL to improve fabri-cation accuracy in a variety of applications including micro-fluidic devices.

关键词： Additive manufacturing multi-material projection stereolithography multi-step exposure interfacial bonding

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：