检索结果-内蒙古大学图书馆

IMPROVED CONTINUATION METHOD controlLER FOR PWM SYSTEMS: AN EXPERIMENTAL CASE STUDY

Asian Journal of control 2008年第1期1卷

作者： T. Iwata M. Yamakita K. Furuta Dept. of Mechanical and Environment Informatics Tokyo Institute of Technology. Takaaki Iwata received the BE degrees in Mechanical Engineering in 1990 from Waseda University Japan. From 1990 to 1996 he jointed NOK Co. Ltd. In 1996 he received his ME degrees in Mechanical and Environmental Informatics from Tokyo Institute of Technology. He is currently a PhD student of Tokyo Institute of Technology. He is a member of SICE RSJ JSME and IEEE. Dept. of Control and Systems Engineering Tokyo Institute of Technology. Masaki Yamakita received Be ME and PhD from Tokyo Institute of Technology in 1984 1986 and 1989 respectively. From 1989 he was a Research Associate in the Department of Control Engineering of Tokyo Institute of Technology and from 1993 he was a Lecturer at Tokyohashi University of Technology. He is currently an Associate Professor in the Department of Control and Systems Engineering of Tokyo Institute of Technology. His research interests include robotics learning control robust control and non-linear control. Katsuhisa Furuta was born in Tokyo Japan in 1940. He received his B.S. M.S. and Ph.D. degrees in Chemical Engineering from Tokyo Institute of Technology in 1962 1964 and 1967 respectively. Since 1967 he has been a teaching staff of Tokyo Institute of Technology where he is currently a Professor of Graduate School of Information Science and Engineering. He is a fellow of IEEE and SICE. He is now a member of Science Council of Japan the secretary of the engineering division a council member of IFAC and the President of SICE in 1999.

In this paper, an improved version of online continuation method controller for PWM systems is presented. The online continuation method controller solves the PWM-type deadbeat control problem numerically. By using this algorithm, iterations for solving the set of nonlinear equations always start from a good solution candidate and therefore it can be used online. The original continuation method is modified so that it is applicable to real systems. The validity of the proposed control method is demonstrated by a laboratory-scale flexible arm manipulator.

关键词： PWM continuation method homotopy deadbeat GPC

来源：评论

学校读者我要写书评

暂无评论

NONLINEAR NETWORK STRUCTURES FOR FEEDBACK control

引用

Asian Journal of control 2008年第4期1卷

作者： F.L. Lewis Dept. of Electical Engineering The University of Texas at Arlington U.S.A. F. L. Lewis was born in Wärzburg. Germany subsequently studyning in Chile and Goruonstoun School in Scotland. He obtained the Bachelor's Degree in Physics/Electrical Engineering and the Master's of Electrical Engineering Degree at Rice University in 1971. He spent six years in the U.S. navy serving as Navigator aboard the frigate USS Trippe (FF-1075) and Executive Officer and Acting Commanding Officer aboard USS Salinan (ATF-161). In 1977 he received the Master's of Science in Aeronautical Engineering from the University of West Florida. In 1981 he obtained the Ph.D. degree at The Georgia Institute of Technology in Atlanta where he was employed as a professor from 1981 to 1990 and is currently an Adjunct Professor. He is a Professor of Electrical Engineering at The University of Texas at Arlington where he was awarded the Moncrief-O'Donnell Endowed Chair in 1990 at the Automation and Robotics Research Institute. Dr. Lewis has studied the geometric analytic and structural properties of dynamical systems and feedback control automation. His current interests include robotics intelligent control neural and fuzzy systes nonlinear systems and manufacturing process control. He is the author/co-author of 2 U.S. patents 124 journal papers 20 chapters and encyclopedia articles 210 refereed conference papers seven books: Optimal Control Optimal Estimation Applied Optimal Control and Estimation Aircraft Control and Simulation Control of Robot Manipulators Neural Network Control High-Level Feedback Control with Neural Networks and the IEEE reprint volume Robot Control. Dr. Lewis is a registered Professional Engineer in the State of Texas and was selected to the Editorial Boards of International Journal of Control Neural Computing and Applications and Int. J. Intelligent Control Systems. He is the recipient of an NSF Research Initiation Grant and has been continuously funded by NSF since 1982. Since 1991 he has received $1.8 m

A framework is given for controller design using Nonlinear Network Structures, which include both neural networks and fuzzy logic systems. These structures possess a universal approximation property that allows them to be used in feedback control of unknown systems without requirements for linearity in the system parameters or finding a regression matrix. Nonlinear nets can be linear or nonlinear in the tunable weight parameters. In the latter case weight tuning algorithms are not straightforward to obtain. Feedback control topologies and weight tuning algorithms are given here that guarantee closed-loop stability and bounded weights. Extensions are discussed to force control, backstepping control, and output feedback control, where dynamic nonlinear nets are required.

关键词： Intelligent feedback control neural networks neural network structures basis function networks fuzzy control fuzzy-neural networks universal approximation adaptive nonparametric control learning control systems

来源：评论

学校读者我要写书评

暂无评论

LANDING AN UNMANNED AIR VEHICLE: VISION BASED MOTION ESTIMATION AND NONLINEAR control

引用

Asian Journal of control 2008年第3期1卷

作者： Omid Shakernia Yi Ma T. John Koo Shankar Sastry Dept. of Electrical Engineering & Computer Science University of California at Berkeley Berkeley CA94720-1774 U.S.A. Tak-Kuen John Koo received the B.Eng. degree in 1992 in Electronic Engineering and the M.Phil. in 1994 in Information Engineering both from the Chinese University of Hong Kong. From 1994 to 1995 he was a graduate student in Signal and Image Processing Institute at the University of Southern California. He is currently a Ph.D. Candidate in Electrical Engineering and Computer Sciences at the University of California at Berkeley. His research interests include nonlinear control theory hybrid systems inertial navigation systems with applications to unmanned aerial vehicles. He received the Distinguished M.Phil. Thesis Award of the Faculty of Engineering The Chinese University of Hong Kong in 1994. He was a consultant of SRI International in 1998. Currently he is the team leader of the Berkeley AeRobot Team and a delegate of The Graduate Assembly University of California at Berkeley. He is a student member of IEEE and SIAM. S. Shankar Sastry received his Ph.D. degree in 1981 from the University of California Berkeley. He was on the faculty of MIT from 1980-82 and Harvard University as a Gordon McKay professor in 1994. He is currently a Professor of Electrical Engineering and Computer Sciences and Bioengineering and Director of the Electronics Research Laboratory at Berkeley. He has held visiting appointments at the Australian National University Canberra the University of Rome Scuola Normale and University of Pisa the CNRS laboratory LAAS in Toulouse (poste rouge) and as a Vinton Hayes Visiting fellow at the Center for Intelligent Control Systems at MIT. His areas of research are nonlinear and adaptive control robotic telesurgery control of hybrid systems and biological motor control. He is a coauthor (with M. Bodson) of “Adaptive Control: Stability Convergence and Robustness Prentice Hall 1989.” and (with R. Murray and Z. Li) of “A Mathematical Introduction to Robotic Manipulati

In this paper, we use computer vision as a feedback sensor in a control loop for landing an unmanned air vehicle (UAV) on a landing pad. The vision problem we address here is then a special case of the classic ego-motion estimation problem since all feature points lie on a planar surface (the landing pad). We study together the discrete and differential versions of the ego-motion estimation, in order to obtain both position and velocity of the UAV relative to the landing pad. After briefly reviewing existing algorithm for the discrete case, we present, in a unified geometric framework, a new estimation scheme for solving the differential case. We further show how the obtained algorithms enable the vision sensor to be placed in the feedback loop as a state observer for landing control. These algorithms are linear, numerically robust, and computationally inexpensive hence suitable for real-time implementation. We present a thorough performance evaluation of the motion estimation algorithms under varying levels of image measurement noise, altitudes of the camera above the landing pad, and different camera motions relative to the landing pad. A landing controller is then designed for a full dynamic model of the UAV. Using geometric nonlinear control theory, the dynamics of the UAV are decoupled into an inner system and outer system. The proposed control scheme is then based on the differential flatness of the outer system. For the overall closed-loop system, conditions are provided under which exponential stability can be guaranteed. In the closed-loop system, the controller is tightly coupled with the vision based state estimation and the only auxiliary sensor are accelerometers for measuring acceleration of the UAV. Finally, we show through simulation results that the designed vision-in-the-loop controller generates stable landing maneuvers even for large levels of image measurement noise. Experiments on a real UAV will be presented in future work.

关键词： Motion estimation computer vision based control unmanned air vehicle differential flatness

来源：评论

学校读者我要写书评

暂无评论

TRACKING DOMAINS FOR UNSTABLE PLANTS WITH SATURATING-LIKE ACTUATORS

引用

Asian Journal of control 2008年第4期1卷

作者： V.A. Yakubovich S. Nakaura K. Furuta Vladimir A. Yakubovich is a corresponding member of Russian Academy of Science. Vladimir A. Yakubovich was born in Novosibirsk Russia in 1926. he entered Moscow University in 1946 and graduated in 1949. he received the Candidate of Science degree (Ph.D.) in 1953 and the Doctor of Science degree in 1959 from Leningrad University. In 1959 he joined the Leningrad University and he has remained since then. He is the author of more than 270 papers and a coauthor of seven books in different areas of applied mathematics and control theory. he has worked in parametric resonance theory in the theory of stability of nonlinear systems and in optimization theory. Dr. Yakubovich has served on many scientific committees and editorial boards. he is a member of several scientific socienties in Russia. He was awarded the Norbert Wiener Prize (1991) a prize from the international editorial company “Nauka” for best publication in its journals (1995) and the IEEE Control Systems Award (1996). Since 1991 he has been a corresponding member of the Russian Academy of Sciences. Dept. of Control Engineering Tokyo Institute of Technology Japan. Shigeki Nakaura received his B.S. and M.S. degrees in Control Engineering from the Tokyo Institute of Technology in 1995 and 1997 respectively. He is currently a PhD student of the Tokyo Institute of Technology. His research interests include robotics and intelligent machining. He is a member of SICE JSPE and IEEE. Katsuhisa Furuta was born in Tokyo Japan in 1940. He received his B.S. M.S. and Ph.D. degrees in Engineering from the Tokyo Institute of Technology in 1962 1964 and 1967 respectively. he was a post doctoral fellow at Laval University (Quebec Canada) from July 1967 to August 1969. Since then he has been a member of the teaching staff of the Tokyo Institute of Technology Department of Control Engineering where he is currently a Professor Graduate School of Information Science and Engineering. He was a Russell Severance Springer Professor University of California at

In many mechanical systems, the tracking control is one of the most important issues. Therefore for the unstable system subject to actuator saturation, the domain of the initial states corresponding to an arbitrary reference signal, within which tracking condition can be achieved, is interesting to be considered. In this paper, an approximate tracking domain is derived analytically. First in Theorem 1, for simple case, it is constructed by using the partial Lyapunov function and the absolute stability theory. In the following Theorems 2 and 3, a new idea is used to obtain larger domains. Finally in the last section, a simple numerical example is given.

关键词： Actuator constraint tracking control nonlinear analysis absolute stability

来源：评论

学校读者我要写书评

暂无评论

Implementation of Industrial Robot Force control Case Study: High Power Stub Grinding and Deburring

Implementation of Industrial Robot Force Control Case Study:...

引用

2006 IEEE/RSJ International Conference on Intelligent Robots and Systems

作者： A. Robertsson T. Olsson R. Johansson A. Blomdell K. Nilsson M. Haage B. Lauwers H. De Baerdemaeker T. Brogardh H. Brantmark Department of Automatic Control Lund University Hospital Lund Sweden Dept. of Automatic Control Lund University Sweden Dept. of Computer Science Lund University Sweden Department of Computer Science Lund University Hospital Lund Sweden Dept. of Mechanical Engineering Faculty of Engineering Heverlee Belgium Department of Mechanical Engineering Heverlee Belgium ABB Automation Technologies - Robotics Västerås Sweden

In this paper, the results from a joint industry-academia project in industrial robotic force control are presented. The extension and implementation of an external sensor system for an industrial robot system, which can be used for high-bandwidth force control, are described. Results from two industrial applications using the system are presented, a stub grinding application using a new compliant grinding end-effector integrated with the robot control system, and a deburring application with a stiff tool requiring high-bandwidth force control in six degrees of freedom. Using the system an easily reconfigurable control structure was achieved, which was able to control contact forces with a sampling bandwidth of an order of magnitude higher than for conventional robot controllers

关键词： Industrial control Service robots Force control Deburring Electrical equipment industry Robot sensing systems control systems Robot control Sensor systems Sampling methods

来源：评论

学校读者我要写书评

暂无评论

High-rise buildings under earthquake excitation: Stabilization using SMC

High-rise buildings under earthquake excitation: Stabilizati...

引用

作者： Dimirovski, Georgi M. Zhao, Jun Vukobratovic, Miomir K. Dogus University Faculty of Engineering Dept. of Computer Engineering Acibadem Zeamet Sk. 21 Kadikoy TR-34722 Istanbul Turkey SS Cyril and Methodius University Faculty of Electrical Engineering Rugjer Boskovic b.b. Karpos II MK-1000 Skopje Macedonia Northestern University School of Information Science and Engineering Institute of Control Science Shenyang Liaoning CN-110004 China Mihailo Pupin Institute Laboratory of Robotics and Automation Volgina 15 Karaburma 11000 Serbia

ISBN: (纸本)9783902661173

The goal to control the dynamics of high-rise buildings either to ameliorate the damage or prevent their destruction when subject to an earthquake excitation has been subject of extensive research. All known control designs have advantages and disadvantages as well as operating limits. The application of sliding-mode control to controlling earthquake induced vibrations of a multi-story structural system as an active seismic compensation plus base isolation has been investigated. The performance has been compared to the one of traditional industrial controls, and relevant conclusions drawn. Simulation results, carried out using El Centro earthquake acceleration, have shown that the sliding mode control can decrease significantly displacements of the floors. Copyright © 2006 IFAC.

关键词： Earthquakes

来源：评论

学校读者我要写书评

暂无评论

Usability and Interoperability of IEC 61499 based distributed automation systems

Usability and Interoperability of IEC 61499 based distribute...

引用

IEEE International Conference on Industrial Informatics (INDIN)

作者： Christoph Sunder Alois Zoitl James H. Christensen Valeriy Vyatkin Robert W. Brennan Antonio Valentini Luca Ferrarini Thomas Strasser Jose L. Martinez-lastra Franz Auinger Automation and Control Institute (ACIN) Vienna University of Technology Vienna Austria Holobloc Inc. Cleveland Heigths OH USA Dept. of Electrical and Computer Engineering The University of Auckland Auckland New Zealand Schulich School of Engineering University of Calgary Calgary Alberta Canada Centro di Ricerca e Innovazione Tecnologica Crit Srl Vignola (Mo) Italy Dipartimento di Elettronica e Informazione Politecnico di Milano Milano Italy Robotics and Adaptive Systems PROFACTOR Produktionsforschungs GmbH Steyr-Gleink Austria Institute of Production Engineering Tampere University of Technology Tampere Finland Upper Austrian University of Applied Science Automation Engineering University of Applied Science Wels Austria Automation Engineering Upper Austrian University of Applied Science Wels Austria

Since IEC 61499 has reached the state of an international standard and a substantial body of research results exists the question of the authors as main intention for this paper was: Do the models of IEC 61499 solve all problems when thinking of usability and interoperability in heterogeneous system environments? The main problems discussed within the paper concern to the execution model defined for basic function blocks and the scheduling of events within function block networks.

关键词： Usability IEC standards Automation Software tools control systems Automatic control Robots Adaptive systems Production engineering Job shop scheduling

来源：评论

学校读者我要写书评

暂无评论

HIGH-RISE BUILDINGS UNDER EARTHQUAKE EXCITATION: STABILIZATION USING SMC

引用

IFAC Proceedings Volumes 2006年第16期39卷 776-781页

作者： Georgi M. Dimirovski Jun Zhao Miomir K. Vukobratovic Dogus University Faculty of Engineering Dept. of Computer Engineering Acibadem Zeamet Sk. 21 Kadikoy TR-34722 Istanbul Rep. of Turkey Fax: ++90-216-327-9631 Tel: ++90-216-327-1104 SS Cyril and Methodius University Faculty of Electrical Engineering Rugjer Boskovic b.b. Karpos II MK-1000 Skopje Rep. of Macedonia Northestern University School of Information Science and Engineering Institute of Control Science Shenyang Liaoning CN-110004 P. R. of China Fax: ++86-24-8367-2273 Tel: ++86-24-2389-3000 Mihailo Pupin Institute Laboratory of Robotics & Automation Volgina 15 Karaburma 11000 F. R. Serbia and Montenegro Fax: ++381-11-2775-870 Tel: ++381-11-2774-236

关键词： Earthquake sliding mode control structural systems vibration control

来源：评论

学校读者我要写书评

暂无评论

Automobile lane detection System-on-Chip integrated with mixed signal mode CMOS image sensor

Automobile lane detection System-on-Chip integrated with mix...

引用

9th International Symposium on Consumer Electronics 2005, ISCE 2005

作者： Hsiao, Pei-Yung Cheng, Hsien-Chein Yeh, Chun-Wei Huang, Shih-Shinh Fu, Li-Chen IEEE Department of Electronic Engineering Chang Gung University Tao-Yuan Taiwan Department of Electrical Engineering National Taiwan University Taipei Taiwan Genesyslogic Co. Ltd. Circuit Layout Department Dept. of Electronic Engineering and Information Management Chang Gung University Department of Electrical Engineering Department of Computer Science and Information Engineering National Taiwan University Robotics and Automation Society Automatic Control Society Chinese Automatic Control Society Chinese Institute of Automation Engineers

In this paper, we aim at developing a System-on-Chip, SoC, which can capture image as well as produce vehicle lane map at the same time. We adopt Peak-Finding based lane detection algorithm that can achieve high recognition rate about 96% even under various weather conditions. The features of the proposed SoC are a single low-cost and compact chip which implements the lane detection algorithm with mixed signal mode CMOS image sensor. Therefore, it can be easily used in thousands of consumer electronics for intelligent automobile applications. © IEEE.

关键词： Image sensors

来源：评论

学校读者我要写书评

暂无评论

Fault detection approach based on fuzzy qualitative reasoning applied to the DAMADICS benchmark problem 5

Fault detection approach based on fuzzy qualitative reasonin...

引用

5th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, Safeprocess 2003

作者： Calado, J.M.F. Carreira, F.P.N.F. Mendes, M.J.G.C. Sá Da Costa, J.M.G. Bartys, M. IDMEC/ISEL - Instituto Superior de Engenharia de Lisboa Polytechnic Institute of Lisbon Mechanical Engineering Studies Centre Rua Conselheiro Emídio Navarro Lisboa1949-014 Portugal Technical University of Lisbon Instituto Superior Técnico Dept. of Mechanical Engineering GCAR/IDMEC Av. Roviseo Pais Lisboa1049-001 Portugal Institute of Automatic Control and Robotics Warsaw University of Technology Chodkiewicza 8 Warsaw02-525 Poland

A computer assisted fault detection methodology based on a fuzzy qualitative simulation algorithm is described. The adoption of fuzzy sets allows a more detailed description of physical variables, through an arbitrary, but finite, discretisation of the quantity space. The fuzzy representation of qualitative values is more general than ordinary interval representation, since it can represent not only the information stated by a well defined real interval but also the knowledge embedded in the soft boundaries of the interval. Such a methodology was applied to a pneumatic servomotor actuated control valve that is the benchmark problem of the EC RTN DAMADICS. © 2003 International Federation of Automatic control.

关键词： Fuzzy inference

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：