检索结果-内蒙古大学图书馆

arXiv 2023年

作者： Perona, Giovanni Meo, Angelo Raffaele Allegretti, Marco Bordi, Isabella Marengo, Elena Mazzetti, Bruno Scovazzi, Mario CSP innovazione nelle ICT Strada del Lionetto 6 Torino Italy Politecnico di Torino Department of Control and Computer Engineering C.so Duca degli Abruzzi 24 Torino Italy Politecnico di Torino Electronics Dept. C.so Duca degli Abruzzi 24 Torino Italy Envisens Tecnologies S.r.l. Corso Ciro Menotti 4 Torino Italy

The purpose of the following proposal is to create a new class of antennas of low weight but with a large transmitting and receiving surface made of metallized fabric. This class of antennas will be stationed in low satellite orbits, at about 2000 km from sea level and will be easily steerable by exploiting the interaction between the earth's magnetic field and an electromagnetic field generated on the antenna. The possibility of orienting very large ultra-light balloon-like MW antennas, orbiting in the Earth magnetic field, through electric currents flowing in conductive wires embedded in the antennas walls, are examined. It is shown that such currents may easily provide the needed forces without the necessity of mechanically orienting the antenna itself. The antenna is extremely light, inexpensive, easily directional. The antenna has the shape of a spheroid in which the southern hemisphere has a parabolic shape made of metallized fabric;the northern hemisphere, transparent to the electromagnetic radiation, has a radius of curvature such that the north pole coincides with the focus of the parabola. © 2023, CC BY-NC-ND.

关键词： Electromagnetic fields

来源：评论

学校读者我要写书评

暂无评论

Study of the Shock Loads Effect on the Operation of Multi-Motor Electric Drives of a Rolling Mill with a Second-order Elastic Coupling

Study of the Shock Loads Effect on the Operation of Multi-Mo...

引用

International Conference on Modern Electrical and Energy Systems (MEES)

作者： Valerii Tytiuk Alexey Kalinin Valeriy Druzhinin Vitalii Kuznetsov Oleksii Chornyi Victor Busher Department of Electromechanics Kryvyi Rih National University Kryvyi Rih Ukraine Department of Informative Computer Systems Abylkas Saginov Karaganda Technical University NPJSC Karaganda The Republic of Kazakhstan Department of Power Engineering Karaganda Industrial University NPJSC Temirtau The Republic of Kazakhstan Department of the Electrical Engineering Ukrainian State University of Science and Technologies Dnipro Ukraine Institute of Electromechanics Energy Saving and Automatic Control Systems Kremenchuk Mykhailo Ostrogradskyi National University Kremenchuk Ukraine Dept. of Electrical Engineering and Electronics National University "Odessa Maritime Academy" Odessa Ukraine

This paper presents a study for optimizing a hot rolling mill. The paper is devoted to the study of ways to reduce the effect of shock loads of synchronous electric drives of the roughing mill group on the relative lengthening of the metal strip in the inter-stand gap of the rolling stands of the finishing mill group. The elasticity of the metal strip in the inter-stand gap of the rolling mill has a significant impact on the movement of intercoupled multi-motor electric drives of the finishing mill group. Another crucial route of exposure that influences the motion of the electric drives within the finishing mill group involves the electromagnetic connection between the drives in the roughing and finishing mill groups. The impact of the electromagnetically connected circuits is evident through the effect of shock loads from synchronous electric drives on the angular velocity of the direct current electric drives within the finishing mill group. The characteristics of the electromagnetic communication circuit are established by the power grid arrangement and equipment specifications. To assess the quality of work of electric drives of the finishing mill group, it is proposed to use the relative lengthening of the metal strip in the inter-stand gap, which is an important indirect indicator of the quality of rolling. The mathematical model of a hot rolling mill that takes into account both the elasticity of the metal strip that connects the DC electric drives of the finishing group, and the electromagnetic coupling circuit that takes into account the impact loads of synchronous electric drives of the roughing group on the example of the mill 1700 of ArcelorMittal Temirtau JSC was proposed in this paper. Using the mathematical model developed in Simulink software using the methods of planning the experiment, regression models were obtained to establish the dependence of the parameters of overexcitation of a synchronous motor on the magnitude of the voltage sag in the no

关键词：

来源：评论

学校读者我要写书评

暂无评论

Innovative Competency-Based Electrical engineering Curriculum

Innovative Competency-Based Electrical Engineering Curriculu...

引用

Frontiers in Education (FIE) Conference

作者： Gustavo P. Rehder Ariana L. C. Serrano José B. Grimoni Anarosa A. F. Brandão Magno M. T. Silva Henrique T. Moriya Cristiano M. Panazio Edson Barbero Marco I. Alayo Irineu G. N. Gianesi Antonio C. Seabra Electronic Systems Department of the Escola Politécnica Universidade de São Paulo São Paulo Brazil Electric Automation and Energy Dept. of the Escola Politécnica Universidade de São Paulo São Paulo Brazil Computer Engineering and Digital Systems Department of the Escola Politécnica Universidade de São Paulo São Paulo Brazil Telecommunications and Control Dept. of the Escola Politécnica Universidade de São Paulo São Paulo Brazil Professional Master's in Administration - Á lvares Penteado School of Commerce Foundation São Paulo Brazil Instituto Mauá de Tecnologia São Paulo Brazil

ISBN: (数字)9798350351507

ISBN: (纸本)9798350363067

The Electrical engineering undergraduate program of the Escola Politécnica of the Universidade de São Paulo has created an alternative innovative curriculum path for its freshmen students in 2024. The Competency-based Path emphasizes the development of competencies and skills for the unprecedented technological advancements that necessitate a holistic education for future electrical engineers, preparing them with practical skills for real-world challenges. The program was designed using an innovative methodology and centers around semester-long or year-long integrative projects. These projects bridge the gap between theory and practice, as students deal with real-world challenges while fostering social responsibility.

关键词： Electrical engineering Education

来源：评论

学校读者我要写书评

暂无评论

Data-driven leak localization in water distribution networks via dictionary learning and graph-based interpolation

arXiv

引用

arXiv 2021年

作者： Irofti, Paul Romero-Ben, Luis Stoican, Florin Puig, Vicenç Department of Computer Science Faculty of Mathematics and Computer Science University of Bucharest Romania Institut de Robòtica i Informàtica Industrial Universitat Politècnica de Catalunya Barcelona Spain Politehnica University of Bucharest Dept. of Automation Control and Systems Engineering Romania

In this paper, we propose a data-driven leak localization method for water distribution networks (WDNs) which combines two complementary approaches: graph-based interpolation and dictionary classification. The former estimates the complete WDN hydraulic state (i.e., hydraulic heads) from real measurements at certain nodes and the network graph. Then, these actual measurements, together with a subset of valuable estimated states, are used to feed and train the dictionary learning scheme. Thus, the meshing of these two methods is explored, showing that its performance is superior to either approach alone, even deriving different mechanisms to increase its resilience to classical problems (e.g., dimensionality, interpolation errors, etc.). The approach is validated using the L-TOWN benchmark proposed at BattLeDIM2020. Copyright © 2021, The Authors. All rights reserved.

关键词： Water distribution systems

来源：评论

学校读者我要写书评

暂无评论

Experiment on scalable multi-user twin-field quantum key distribution network

arXiv

引用

arXiv 2021年

作者： Zhong, Xiaoqing Wang, Wenyuan Mandil, Reem Lo, Hoi-Kwong Qian, Li Center for Quantum Information and Quantum Control Dept. of Physics University of Toronto TorontoONM5S 1A7 Canada Center for Quantum Information and Quantum Control Dept. of Electrical & Computer Engineering University of Toronto TorontoONM5S 3G4 Canada Department of Physics University of Hong Kong Pokfulam Road Hong Kong

Twin-field quantum key distribution (TFQKD) systems have shown great promise for implementing practical long-distance secure quantum communication due to its measurement-device-independent nature and its ability to offer fundamentally superior rate-loss scaling than point-to-point QKD systems. A surge of research and development effort in the last two years has produced many variants of protocols and experimental demonstrations. In terms of hardware topology, TFQKD systems interfering quantum signals from two remotely phase-locked laser sources are in essence giant Mach-Zehnder interferometers (MZIs) requiring active phase stabilization. Such configurations are inherently unsuitable for a TFQKD network, where more than one user-pair share the common quantum measurement station, because it is practically extremely difficult, if not impossible, to stabilize MZIs of largely disparate path lengths, a situation that is inevitable in a multi-user-pair TFQKD network. On the other hand, Sagnac interferometer based TFQKD systems exploiting the inherent phase stability of the Sagnac ring can implement asymmetric TFQKD, and are therefore eminently suitable for implementing a TFQKD network. In this work, we experimentally demonstrate a proof-of-principle multi-user-pair Sagnac TFQKD network where three user pairs sharing the same measurement station can perform pair-wise TFQKD through time multiplexing, with channel losses up to 58 dB, and channel loss asymmetry up to 15 dB. In some cases, the secure key rates still beat the rate-loss bounds for point-to-point repeaterless QKD systems, even in this network configuration. It is to our knowledge the first multi-user-pair TFQKD network demonstration, an important step in advancing quantum communication network technologies. © 2021, CC BY-NC-SA.

关键词： Quantum cryptography

来源：评论

学校读者我要写书评

暂无评论

Dynamic Resilient Graph Games for State-Dependent Jamming Attacks Analysis on Multi-Agent Systems

引用

IFAC-PapersOnLine 2020年第2期53卷 3421-3426页

作者： Yurid Nugraha Ahmet Cetinkaya Tomohisa Hayakawa Hideaki Ishii Quanyan Zhu Dept. of Systems and Control Engineering Tokyo Institute of Technology Tokyo 152-8552 Japan Information Systems Architecture Science Research Division National Institute of Informatics Tokyo 101-8430 Japan Dept. of Computer Science Tokyo Insitute of Technology Yokohama 226-8502 Japan Dept. of Electrical and Computer Engineering New York University Brooklyn NY 11201 USA

A cybersecurity problem for a multi-agent consensus problem is investigated through a dynamic game formulation. Specifically, we consider a game repeatedly played between a jamming attacker and a defender. The attacker attempts to jam the links between a number of agents to delay their consensus. On the other hand, the defender tries to maintain the connection between agents by attempting to recover some of the jammed links with the goal of achieving faster consensus. In each game, the players decide which links to attack/recover and for how long to continue doing so based on a Lyapunov-like function representing the largest difference between the states of the agents. We analyze the subgame perfect equilibrium of the game and obtain an upper bound of the consensus time that is influenced by the strategies of the players. The results are illustrated with a numerical example.

关键词： Multi-agent systems Consensus problem Game theory Cybersecurity

来源：评论

学校读者我要写书评

暂无评论

Enabling Conditions for the Deployment of Integrated Local Energy Communities in Europe

Enabling Conditions for the Deployment of Integrated Local E...

引用

Blockchain for Renewables Integration (BLORIN), Workshop on

作者： Martina Caliano Amedeo Buonanno Marialaura Di Somma Giorgio Graditi Christina Papadimitriou Chrysanthos Charalambous Przemysław Dopierała Leszek Bronk Dept. of Energy Technologies and Renewable Energy Sources ENEA Portici NA Italy Electrical Engineering dpt. Eindhoven University of Technology (TU/e) Eindhoven The Netherlands Department of Electrical and Computer Engineering University of Cyprus FOSS Research Centre for Sustainable Energy Nicosia Cyprus Department of Control Information and Communications Instytut Energetyki - Instytut Badawczy Gdansk Poland Department of Strategy and System Development Instytut Energetyki - Instytut Badawczy Gdansk Poland

ISBN: (纸本)9781665472500

The main goal of eNeuron H2020 project (Nov 2020-Oct. 2024, ID: 957779) is to develop innovative tools for the optimal design and operation of local energy communities, integrating distributed energy resources and multiple energy carriers at different scales. This paper presents a review study of the enabling conditions for the deployment of integrated local energy communities (ILECs) in Europe, performed within the project. The enabling conditions are addressed by defining the key actors and their interests in the implementation of an energy community at local level and through a detailed mapping of the enabling and emerging energy and information and communication technologies at both household and community levels. Special focus is also on mapping of the demand-side flexibility technologies to understand the benefits of local flexibility and impacts on the larger systems. In such analysis, the key issues for implementation and adaptation of this new energy paradigm are investigated through covering technological, socio-economic, environmental, and regulatory aspects.

关键词： Renewable energy sources Conferences Europe Information and communication technology Distributed power generation Blockchains

来源：评论

学校读者我要写书评

暂无评论

On the Role of Models in Learning control: Actor-Critic Iterative Learning control

arXiv

引用

arXiv 2020年

作者： Poot, Maurice Portegies, Jim Oomen, Tom Control Systems Technology Group Dept. of Mechanical Engineering Eindhoven University of Technology Eindhoven Netherlands CASA Dept. of Mathematics and Computer Science Eindhoven University of Technology Eindhoven Netherlands

Learning from data of past tasks can substantially improve the accuracy of mechatronic systems. Often, for fast and safe learning a model of the system is required. The aim of this paper is to develop a model-free approach for fast and safe learning for mechatronic systems. The developed actor-critic iterative learning control (ACILC) framework uses a feedforward parameterization with basis functions. These basis functions encode implicit model knowledge and the actor-critic algorithm learns the feedforward parameters without explicitly using a model. Experimental results on a printer setup demonstrate that the developed ACILC framework is capable of achieving the same feedforward signal as preexisting model-based methods without using explicit model knowledge. Copyright © 2020, The Authors. All rights reserved.

关键词： Learning algorithms

来源：评论

学校读者我要写书评

暂无评论

Modified indexing algorithm based on priority queue in metric space for MVP tree 4

Modified indexing algorithm based on priority queue in metri...

引用

4th International Conference on Future Networks and Distributed Systems, ICFNDS 2020

作者： Fomin, Vladimir Aleksandrov, Igor Gallyamov, Denis Kirichek, Ruslan Dept. of Information Systems Herzen State Pedagogical University of Russia Saint Petersburg Russia Dept. of Software Engineering and Computer Science Bonch-Bruevich Saint Petersburg State University of Telecommunications Saint Petersburg Russia Bonch-Bruevich Saint Petersburg State University of Telecommunications Saint Petersburg Russia V. A. Trapeznikov Institute of Control Sciences of Russian Academy of Sciences Moscow Russia

ISBN: (纸本)9781450388863

The Internet of Things (IoT) algorithms process huge amounts of heterogeneous data in real-time. One of the most computationally intensive tasks using cloud technologies is the task of clustering and classifying data. The authors propose to develop an approach to data classification within the "Query by Similarity"paradigm, which uses the technology of data indexing based on Metric Access Methods (MAM). To improve the performance of data indexing, this paper proposes a similar nearest neighbor search method combining a multiple vantage point tree (MVP) and improved algorithms for processing the priority queue of nodes. The following two algorithms for processing the priority queue of nodes were developed: 1) algorithm for all kinds of points-queries, which makes it possible to take into account parent nodes of all higher levels;2) algorithm for grouped based on clustering of points-queries by reusing previously obtained search results. Experimental results confirm the effectiveness of the proposed approaches and algorithms. © 2020 ACM.

关键词： Nearest neighbor search

来源：评论

学校读者我要写书评

暂无评论

Capacitive sensor and its calibration- A technique for the estimation of solid particles flow concentration 2

Capacitive sensor and its calibration- A technique for the e...

引用

2nd International Conference on Clean Energy and Electrical Systems, CEES 2019

作者： Abrar, Usama Shi, Liu Jaffri, Nasif R. Li, Qin Omar, Mian W. Sindhu, Hassan R. School of Control and Computer Engineering North China Electric Power University Beijing102206 China School of Engineering and Digital Arts University of Kent United Kingdom Dept. of Computer Engineering Bahria University Islamabad Campus Pakistan Dept. of Electrical Engineering Edith Cowan University Joondalup PerthWA6027 Australia

The precise and accurate measurement of flow rate in the batch flow of the solid particles is of primary importance in many process industries for the improvement of the efficiency of the system. Many techniques developed for the measurement of mass flow rate. The capacitive sensors has a significance of being non-invasive, higher accuracy and low cost for mass flow measurement despite the fact that many factors adversely affect the performance- including non-uniform flow, multiphase flow, temperature, pressure, and moisture in the solid particles. This paper covers preliminary investigations of the offline estimation of mass flow concentration based upon the calibration of capacitance electrodes to quantify the mass of dielectric as a function of capacitance variation between the electrodes. © 2019 IOP Publishing Ltd. All rights reserved.

关键词： Calibration

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：