检索结果-内蒙古大学图书馆

2024 Pacific Basin Nuclear Conference, PBNC 2024

作者： Bhowmik, Palash K. Schlegel, Joshua P. Sabharwall, Piyush Division of Reactor System Design and Analysis Idaho National Laboratory Idaho FallsID United States Department of Nuclear Engineering and Radiation Science Missouri University of Science and Technology RollaMO United States

ISBN: (纸本)9798331307653

This study presents steam condensation scaled experiments and semi-empirical models in presence of nitrogen (N)—a noncondensable gas (NCG), simulating air in the reactor containment—to support water-cooled small modular reactors (SMRs) passive containment cooling system (PCCS) design and analysis. Previous experimental studies on PCCS are focused on fixed and smaller tube (mostly 2-in.) geometries and specific test condition variations, bringing challenges with geometric scaling and mismatching with SMR prototypic design. To address these challenges, this study presents steam condensation test dataset obtained from three scaled test sections of 1-, 2-, and 4-in.-diameter steam condensers with an annular/ jacket cooling of 2-, 3-, and 6 in.-diameter tubes, respectively. Test data were collected for steam ranges from 58 to 63 kg/hr., and NCG flow of to 13.3 kg/hr. Annular cooling water flow was varied to obtain required testing conditions of saturated steam 4.4 inlet and fully condensed outlet. Axial temperature test data of bulk cooling water, steam and condensate were collected by thermocouples for three test sections and various steam-NCG mixing/testing conditions. A standard data reduction method was adopted—utilizing iterative and nodalized mass and heat transfer calculation—to estimate axial local heat fluxes, heat transfer coefficients (HTCs), condensation rates, film thickness, and Nusselt number. Based on the obtained dataset semi-empirical model results—a ratio of experimental and Nusselt’s theoretical HTC are presented. Such results and findings are supportive of developing scaled-up testing facility, to model validations and accelerate next generation of reactors development and deployment. © 2024 Pacific Basin Nuclear Conference, PBNC 2024. All rights reserved.

关键词： Thermocouples

来源：评论

学校读者我要写书评

暂无评论

Recent advances in the thermal barrier coatings for extreme environments

引用

Materials Science for Energy Technologies 2021年 4卷 208-210页

作者： Mondal, Kunal Nuñez, Luis Downey, Calvin M. van Rooyen, Isabella J. Materials Science and Engineering Department Idaho National Laboratory Idaho FallsID83415 United States Irradiated Fuels and Materials Department Idaho National Laboratory Idaho FallsID83415 United States Fuel Design and Development Department Idaho National Laboratory Idaho FallsID83415 United States Reactor System Design and Analysis Division Idaho National Laboratory Idaho FallsID83415 United States

Thermal barrier coatings (TBCs) are gaining tremendous research interest for protecting aircraft turbine blades, power plants, and other applications from high-temperature exposure. This opinion spotlights on those recent progresses that have directed to the use of TBCs for component life addition and, lately, as an essential part of advanced components design for high temperatures and related harsh environments, such as applications in the nuclear industries. Development of this coatings has been driven by results obtained from laboratory and industrial testing, corroborated by engine and gas-turbine testing and related high-temperature application experience. Factors that have led to the choice of current high-tech advanced coating fabrication methods–such as plasma spray deposition (PSP), electron-beam physical vapor deposition (EB-PVD), and electrophoretically fabricated thermal barrier coatings, have also been highlighted in current coating research and development. Here, we provide a short review on the present status of TBCs, their latest advances in fabrication and performance, drawbacks associated with them, as well as recommendations for their futuristic use in harsh high-temperature environments. © 2021

关键词： Thermal barrier coatings

来源：评论

学校读者我要写书评

暂无评论

Repair of TMI-1 OTSG tube failures. Use of a kinetic tube-expansion process to resesal tubes within the upper tube sheet provides a cost-effective and relatively low-expousure repair process

引用

Process Safety Progress 1983年第3期2卷 173-175页

作者： David G. Slear Robert L. Long James D. Jones F. S. Giacobbe GPU Nuclear Parsippany N.J. 07054 In 1974 David Slear joined General Public Utilities Nuclear Corp. where his responsibilities included the design review of components for new nuclear power plants and troubleshooting component failures both in nuclear power and fossil plants in the GPU System. In 1978 he was promoted to Preliminary Engineering Manager and was responsible for coordinating the preparation of design criteria for several coal-fired plants and combustion turbines to be installed throughout the 1980s. Immediately following the TMI-2 accident he was placed in charge of coordinating the establishment of criteria and the design for numerous modifications that were perceived to be required in order to maintain core cooling and a stable safe shutdown condition for the TMI-2 reactor. Subsequently he was promoted to Manager of TMI Engineering Projects which involved establishing the criteria and coordinating the engineering for the numerous modifications required to TMI-1 as a result of the Lessons Learned from the accident at TMI-2. He holds a B.S. Degree in Mechanical Engineering and an M.S. Degree in Mechanical Engineering. Since April 1982 Robert L. Long has been Vice President and Director of the Nuclear Assurance Division of the GPU Nuclear Corp. This includes responsibilities for the Quality Assurance Department the Nuclear Safety Assessment Department the Training & Education Directorate and the Emergency Preparedness Department. Joining GPU in 1978 he has been actively involved with Three Mile Island recovery and restart activities since the spring of 1979. From February 1980 through March 1982 he served as Director–Training & Education for GPU Nuclear. He holds the B.S. degree in Electrical Engineering from Bucknell University and the M.S.E. and Ph.D. degrees in Nuclear Engineering from Purdue University. He has written numerous publications and has presented lectures on “energy and the environment” issues all over the United States and in Southeast Asia. Since joining GPU Nuclear Corpo

来源：评论

学校读者我要写书评

暂无评论

MAGNETOHYDRODYNAMIC SUBMARINE PROPULSION systemS

引用

NAVAL ENGINEERS JOURNAL 1991年第3期103卷 141-157页

作者： SWALLOM, DW SADOVNIK, I GIBBS, JS GUROL, H NGUYEN, LV VANDENBERGH, HH Daniel W. Swallomis the director of military power systems at Avco Research Laboratory Inc. a subsidiary of Textron Inc. in Everett Mass. Dr. Swallom received his B.S. M.S. and Ph.D. degrees in mechanical engineering from the University of Iowa Iowa City Iowa in 1969 1970 and 1972 respectively. He has authored numerous papers in the areas of power propulsion and plasma physics and currently is a member of the Aerospace Power Systems Technical Committee of the AIAA. Dr. Swallom has directed various programs for the development of advanced power generation systems lightweight power conditioning systems and advanced propulsion systems for marine applications. His previous experience includes work with Odin International Corporation Maxwell Laboratories Inc. Argonne National Laboratory and the Air Force Aero Propulsion Laboratory. Currently Dr. Swallom is directing the technical efforts to apply magnetohydrodynamic principles to a variety of propulsion and power applications for various marine vehicles and power system requirements respectively. Isaac Sadovnikis a principal research engineer in the Energy Technology Office at Avco Research Laboratory Inc. a subsidiary of Textron Inc. He received his B.S. in engineering (1974) B.S. in physics (1975) M.S. in aeronautics and astronautics (1976) and Ph.D. in physics of fluids (1981) at the Massachusetts Institute of Technology. Dr. Sadovnik has been involved in research work funded by DARPA concerning the use of magnetohydrodynamics for underwater propulsion. He has built theoretical models that predict the hydrodynamic behavior of seawater flow through magnetohydrodynamic ducts and their interaction with the rest of the vehicle (thrust and drag produced). In addition Dr. Sadovnik has been involved in research investigations geared toward the NASP program concerning the use of magnetohydrodynamic combustion-driven accelerator channels. Prior to joining Avco Dr. Sadovnik was a research assistant at MIT where he conducted experimental and

Magnetohydrodynamic propulsion systems for submarines offer several significant advantages over conventional propeller propulsion systems. These advantages include the potential for greater stealth characteristics, increased maneuverability, enhanced survivability, elimination of cavitation limits, greater payload capability, and the addition of a significant emergency propulsion system. These advantages can be obtained with a magnetohydrodynamic propulsion system that is neutrally bouyant and can operate with the existing submarine propulsion system power plant. A thorough investigation of magnetohydrodynamic propulsion systems for submarine applications has been completed. During the investigation, a number of geometric configurations were examined. Each of these configurations and mounting concepts was optimized for maximum performance for a generic attack class submarine. The optimization considered each thruster individually by determining the optimum operating characteristics for each one and accepting only those thrusters that result in a neutrally buoyant propulsion system. The results of this detailed optimization study show that the segmented, annular thruster is the concept with the highest performance levels and greatest efficiency and offers the greatest potential for a practical magnetohydrodynamic propulsion system for attack class submarines. The optimization study results were used to develop a specific point design for a segmented, annular magnetohydrodynamic thruster for an attack class submarine. The design point case has shown that this thruster may be able to provide the necessary thrust to propel an attack class submarine at the required velocity with the potential for a substantial acoustic signature reduction within the constraints of the existing submarine power plant and the maintenance of neutral buoyancy. This innovative magnetohydrodynamic propulsion system offers an approach for submarine propulsion that can be an important contributio

关键词： Ship Propulsion

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：