检索结果-内蒙古大学图书馆

Electronic structure engineering of transition metal dichalcogenides for boosting hydrogen energy conversion electrocatalysts

引用

Chinese Physics B 2024年第9期33卷 13-28页

作者： Bing Hao Jingjing Guo Peizhi Liu Junjie Guo Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024China

Electrocatalytic water splitting for hydrogen production is an appealing strategy to reduce carbon emissions and generate renewable *** promising process,however,is limited by its sluggish reaction kinetics and high-cost *** two-dimensional(2D)transition metal dichalcogenides(TMDCs)have presented great potential as electrocatalytic materials due to their tunable bandgaps,abundant defective active sites,and good chemical ***,phase engineering,defect engineering and interface engineering have been adopted to manipulate the electronic structure of TMDCs for boosting their exceptional catalytic ***,it is essential to clarify the local structure of catalytically active sites of TMDCs and their structural evolution in catalytic reactions using atomic resolution electron microscopy and the booming in situ technologies,which is beneficial for exploring the underlying reaction *** this review,the growth regulation,characterization,particularly atomic configurations of active sites in TMDCs are *** significant role of electron microscopy in the understanding of the growth mechanism,the controlled synthesis and functional optimization of 2D TMDCs are *** review will shed light on the design and synthesis of novel electrocatalysts with high performance,as well as prompt the application of advanced electron microscopy in the research of materials science.

关键词： TMDCs STEM hydrogen energy conversion active site identification

来源：评论

学校读者我要写书评

暂无评论

Enhanced corrosion resistance of epoxy resin coating via addition of CeO_(2) and benzotriazole

引用

Chinese Journal of Chemical Engineering 2024年第3期67卷 89-96页

作者： Xu Han Ruijie Guo Baolong Niu Hong Yan College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024China

The use of fillers to enhance the corrosion protection of epoxy resins has been widely *** this work,cerium dioxide(CeO_(2))and benzotriazole(BTA)were introduced into an epoxy resin to enhance the corrosion resistance of Q235 carbon *** electron microscopy results indicated that the CeO_(2) grains were rod-like and ellipsoidal in shape,and the distribution pattern of BTA was analyzed by energy dispersive *** dynamic potential polarization curve proved the excellent corrosion resistance of the composite epoxy resin with CeO_(2) and BTA co-addition,and electrochemical impedance spectroscopy test analysis indicated the significantly enhanced long-term corrosion protection performance of the composite *** the optimal protective performance was provided by the coating containing 0.3%(mass)CeO_(2) and 20%(mass)BTA,which was attributed to the barrier performance of CeO_(2) particles and the chemical barrier effect of *** formation of corrosion products was analyzed using X-ray *** addition,the corrosion resistance mechanism of the coating was also discussed in detail.

关键词： Benzotriazole Cerium dioxide Corrosion resistance Carbon steel Epoxy resin coating Preparation

来源：评论

学校读者我要写书评

暂无评论

Highly efficient and photothermally stable CDs@ZIF-8 for laser illumination

引用

Chinese Chemical Letters 2024年第10期35卷 273-277页

作者： Zhi Wang Lingpeng Yan Yelin Hao Jingxia Zheng Yongzhen Yang Xuguang Liu Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024China College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China

Carbon dots(CDs),as a solid-state phosphor,have great potential for application in a new solid-state lighting device—laser diode(LD).For high efficiency LD devices,both high photoluminescence quantum yield(PLQY)and high photothermal stability of CDs are ***,yellow CDs@ZIF-8 composites with high structural stability were prepared by encapsulating CDs in zeolitic imidazolate framework-8(ZIF-8)through electrostatic adsorption between CDs and ZIF-8,in which CDs with amino groups on the surface were used as luminescent feeders and ZIF-8 was used as a protective layer *** asprepared CDs@ZIF-8 not only possess a high PLQY of up to 81.17%,but also maintain a high fluorescence intensity of 100%and 80%under long-term illumination(60 min)and high temperature(478 K),*** hydrogen bonding between CDs and ZIF-8 in the encapsulated structure can enhance the degree of electron cloud delocalization,which can improve the PLQY of CDs@***,CDs@ZIF-8has high photothermal stability due to the binding effect of ZIF-8 on CDs and high thermal stability of *** white LD device,fabricated from CDs@ZIF-8 as a phosphor in combination with 450 nm blue LD,has a color coordinate of(0.37,0.33),a color temperature of 3762 K,and a high color rendering index of *** study provides a new strategy for the construction of solid-state phosphors with high PLQY and high photothermal performance.

关键词： Carbon dots Metal-organic frameworks High photothermal stability High photoluminescence quantum yield Laser illumination

来源：评论

学校读者我要写书评

暂无评论

A novel high-efficient P/N/Si-containing APP-based flame retardant with a silane coupling agent in its molecular structure for epoxy resin

引用

Chinese Journal of Chemical Engineering 2023年第3期55卷 137-147页

作者： Qiang Sun Jinlei Wang Xue Meng Jie Zhang Hong Yan College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Interface Science and Engineering in Advanced Materials(Taiyuan University of Technology) Ministry of EducationTaiyuan 030024China

A flame retardant containing multiple antiflaming elements usually exhibits high-efficient flame retardancy. Here, a novel P/N/Si-containing ammonium polyphosphate derivative(APTES-APP) is synthesized from ammonium polyphosphate(APP) and silane coupling agent(3-aminopropyl)triethoxysilane(APTES)via cation exchange, which is quite different in the chemical structure from APTES-modified APP for retaining silicon hydroxyls. APTES-APP is highly efficient for the epoxy resin. 8%(mass) APTES-APP imparts excellent flame retardancy to the epoxy resin, with a V-0 rating at the UL-94 test(1.6 mm)and an LOI value of 26%(vol). The peak heat release rate and total smoke production of the flameretardant epoxy resin are decreased by 68.1% and 31.3%, respectively. The synergy of P/N/Si contributes to the well-expanded char residue with a strong and dense surface layer, which is a very good barrier against heat and mass transfer. Besides, there is no significant deterioration in the mechanical properties of flame-retardant epoxy resin thanks to silicon hydroxyls forming hydrogen bonds with epoxy molecules. Meanwhile, other molecules can be grafted onto APTES-APP via these silicon hydroxyls, if ***, this work has developed a new strategy for amino silane as flame retardants. In conjunction with a low-cost and simple preparation method, APTES-APP has a promising prospect in the high-performance flame-retardant epoxy.

关键词： Ammonium polyphosphate Silane coupling agent All-in-one system Flame retardancy Epoxy resin

来源：评论

学校读者我要写书评

暂无评论

Immobilizing Triphenylamine with Photoredox Inert Sr^(2+)Forming Sr-MOF with Controlled Electron Migration for Photocatalytic Oxidation of Thiols to Disulfides

引用

Chinese Journal of Chemistry 2024年第10期42卷 1093-1099页

作者： Ying-Xia Wang Fang Zheng Dong-Xia Song Bao-Yue Niu Lu-Qian Deng Xian-Ming Zhang Key Laboratory of Magnetic Molecules and Magnetic Information Materials(Ministry of Education) Schoolof Chemistry and Materials ScienceShanxi Normal UniversityTaiyuanShanxi 030006China Key Laboratory of Interface Science and Engineering in Advanced Material(Ministry of Education) College of ChemistryTaiyuan University of TechnologyTaiyuanShanxi 030024China

The photocatalytic oxidative coupling of thiols is one of the most popular methods to synthesize the *** and its derivatives(TPAs)are promising for the above reaction,but suffer from the easy polymerization and difficult *** overcome these obstacles while controlling the photogenerated electrons transfer directly to target substrates,herein,we constructed one TPA-based metal-organic framework(MOF),(Me_(2)NH_(2))[Sr(TCBPA)]·DMA·3H_(2)O(1),by direct self-assembly of tris(4′-carboxybiphenyl)amine(H_(3)TCBPA)and photoredox inert strontium ion(Sr^(2+)).DFT calculations revealed that the valence band maximum(VBM)and the conduction band minimum(CBM)are mainly located on TCBPA^(3-),successfully inhibiting the undesirable electron migration to metal *** results indicated that 1 displays superior performance than homogeneous H_(3)TCBPA,which may result from the abundant π…π and C—H…π interactions between the well-arranged TCBPA^(3-)and the build-in electric field between the anionic framework and the Me_(2)NH^(2+).This work highlights that immobilizing TPAs into MOFs is one promising approach to designing heterogeneous photocatalysts for the synthesis of disulfides by oxidative coupling of thiols.

关键词： Triphenylamine Metal-organic frameworks Strontium Photooxidation Thiols Disulfides

来源：评论

学校读者我要写书评

暂无评论

Microstructure Evolution and Nanomechanical Behavior of Micro-Area in Molten Pool of Selective Laser Melting(CoCrNi)_(82)Al_(9)Ti_(9)High-Entropy Alloy

引用

Acta Metallurgica Sinica(English Letters) 2024年第6期37卷 1019-1033页

作者： Hong-Wei Zhang Li-Wei Lan Zhe-Yu Yang Chang-Chun Li Wen-Xian Wang College of Materials Science and Engineering Taiyuan University of TechnologyTaiyuan030024China Ministry of Education Key Laboratory of Interface Science and Engineering in Advanced MaterialsTaiyuan University of TechnologyTaiyuan030024China Shanxi-Zhejiang University New Materials and Chemical Research Institute Taiyuan030032China

In this work,the phase evolution mechanism and nanomechanical properties of(CoCrNi))(82)Al_(9)Ti_(9)high-entropy alloy(HEA)prepared by selective laser melting(SLM)in the molten pool were *** HEA contains multiple primary elements and undergoes high-temperature gradient and rapid cooling during *** leads to significant inhomogeneity of nano-scale microstructure characteristics and instability of *** optimizing process parameters,the microstructure evolution at the optimal parameter volume energy density of 440 J/mm^(3)was studied.A phase transition from BCC to FCC occurred in the melt *** the micro-area of the melt pool results in a temperature rise and the combustion-induced loss of Al ***,the Ni element content increases significantly outside the melt *** process enhances the phase stability of FCC and facilitates phase ***,rapid cooling leads to the formation of distinctive ultrafine equiaxial crystals inside the melt pool,accompanied by the generation of intracrystalline needle-like nano-scale *** the melt pool,the accumulation of energy results in the formation of coarse ***,the nano-hardness inside the molten pool is remarkably high at 11.79 GPa,while the outside the molten pool is reduced to 9.58 *** the fracture toughness outside the melt pool also *** with inside the melt pool,the residual stress outside the melt pool changed from compressive to tensile stress and decreased from 603.28 to 322.84 MPa.

关键词： High-entropy alloys Selective laser melting Microstructure evolution Nanoindentation

来源：评论

学校读者我要写书评

暂无评论

Preparation, characterization and antibacterial property of naringin loaded PLGA nanospheres

引用

Progress in Natural science:materials International 2022年第4期32卷 498-503页

作者： Shuo Wang Tianren Xue Baolong Niu Liqiao Wei Huifang Wang Key Laboratory of Interface Science and Engineering in Advanced Materials Ministry of Education Taiyuan University of Technology College of Materials Science and Engineering Taiyuan University of Technology

Naringin is a predominant flavanone in grapefruit and shows a variety of biological effects such as antioxidative,anticancer, anti-inflammatory and antibacterial activity. However, its application in pharmaceutical field is limited by low water solubility, poor bioavailability and instability. To overcome the problem, naringin has been encapsulated in poly（lactic-co-glycolic acid）(PLGA) polymer by emulsion-diffusion-evaporation method in this work. Moreover, naringin loaded PLGA nanospheres were characterized by scanning electron microscope（SEM）,dynamic light scatter method（DLS）, fourier transform infrared（FTIR） spectra, UV–vis spectra and fluorescence spectra of DNA-EB competition displacement. The mean diameter of PLGA nanospheres and NRG/PLGA nanospheres was 123 ± 25 nm and 137 ± 30 nm, respectively. The drug encapsulation efficiency was 86.4% while the drug loading rate was 22.3%. The fluorescence spectra of the competitive DNA-binding experiments revealed that the functional activity of naringin was retained after loaded in PLGA. It is revealed that the initial burst effect happened in the initial 24 h and followed by sustained release lasting for 10 days. Moreover, the nanospheres exhibited strong antibacterial activity, and 99.9% of E. coli and S. aureus were killed when treated with naringin loaded PLGA nanospheres at the concentration of 0.2 mg mL-1within 24 h. Furthermore, the viable cells remained only 48% when the concentration of NRG/PLGA nanospheres was 32 μg m L-1and NRG/PLGA nanospheres was important for inhibition of cancer cells. It is concluded that the stable naringin loaded PLGA nanospheres could have potential application in food industry and nanomedicine field.

关键词： Naringin PLGA Nanospheres Sustained release Antibacterial activity

来源：评论

学校读者我要写书评

暂无评论

Evidence of microstructural evolution linked to non-monotonic distribution of micromechanical properties induced by shot peening

引用

材料科学技术（英文版） 2025年第4期207卷 238-245页

作者： Guoxin Lu Qiang Wang Bonnie Attard Huhu Su Shijian Zheng Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials Ministry of EducationSchool of Materials Science and EngineeringShandong UniversityJinan250061China Aviation Key Laboratory of Science and Technology on Advanced Corrosion and Protection for Aviation Material AECC Beijing Institute of Aeronautical MaterialsBeijing100095China Department of Metallurgy and Materials Engineering University of MaltaMSD2080Malta Tianjin Key Laboratory of Materials Laminating Fabrication and Interface Control Technology School of Materials Science and EngineeringHebei University of TechnologyTianjin300130China

The residual stress field induced by surface strengthening processes such as mechanical shot peening and other forms of plastic deformation does not generally exhibit a simple"monotonic"distribution *** researchers have analyzed this fact from a mechanical perspective based on Hertz ***,the micro/nano-scale microstructural changes corresponding to the distribution of residual stress fields still appear to be *** this study,we focused on a widely used material in aviation manufacturing,namely nickel-based superalloy GH4169,as our experimental *** subjected GH4169 alloy to me-chanical strengthening treatment using a shot peening intensity of 0.25 mmA,followed by quantitative testing of micromechanical performance indicators such as microhardness and residual *** thor-oughly investigate the relationship between micromechanical properties and microstructure changes,we utilized transmission electron microscopy(TEM)to observe and analyze shot-peened materials at differ-ent *** findings revealed that the most severe microstructural distortion induced by mechanical shot peening in GH4169 alloy was likely to occur within a depth range of 25 to 75 *** observation aligns with the actual phenomenon that the maximum microhardness and maximum residual compres-sive stress did not manifest on the outermost surface of the *** presenting a detailed analysis of deformation defects such as dislocations,stacking faults,and twinning in different depths of mechan-ically strengthened layers,our study contributes to a deeper understanding and practical application of post-processing technologies based on plastic deformation.

关键词： Mechanical shot peening Surface strengthening Residual stress Microstructure

来源：评论

学校读者我要写书评

暂无评论

ZIF-8 modified by isocyanate as a photocatalytic antibacterial agent

引用

Rare Metals 2024年第6期43卷 2708-2718页

作者： Yi-Ning Zhang Zhen Pei Zi-Hao Wang Chong-En Wang Fen-Fen Liang Li-Qiao Wei College of Architecture Taiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Interface Science and Engineering in Advanced Materials of Taiyuan University of Technology Ministry of EducationTaiyuan 030024China Department of Materials Science and Engineering Shanxi Institute of TechnologyYangquan 045000China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030000China

Zeolite imidazole skeleton(ZIF-8)is a promising option for self-cleaning of building exterior walls due to its large specific surface area,high antibacterial activity and low ***,it suffers from low antibacterial efficiency and yield under visible light *** address the issues,we developed the photocatalytic materials T-ZIF-8-TDI(thermally treated-ZIF-8-toluene 2,4-diisocyanate)by modifying ZIF-8 with thermal oxygen sensitization and chemical *** results show that the yield of T-ZIF-8-TDI photocatalytic antibacterial agent is increased to 11.5 times of that of T-ZIF-8,while maintaining the crystal structure of T-ZIF-8 and thermal stability up to 60℃.Furthermore,T-ZIF-8-TDI exhibits extended optical response range to the nearinfrared region,significantly narrowed band gap,improved photogenerated elec tron-hole separation efficiency,reduced recombination rate,and excellent photocatalytic *** the concentration of antibacterial agent is 600 mg·L^(-1),the antibacterial rate of Escherichia coli(***)reaches 99.99%irradiated by visible light for30 min,and when the concentration of antibacterial agent is 200 mg·L^(-1),the antibacterial rate of Staphylococcus aureus(***)reaches 99.99%irradiated by visible light for 25 *** also analyzed the reasons in detail from the aspects of bacterial species and antibacterial mechanism,and proposed the antibacterial mechanism of·O_(2)^(-)and h^(+)as the main active *** findings suggest that T-ZIF-8-TDI photocatalytic antibacterial agent has potential for use in self-cleaning of building exterior walls.

关键词： ZIF-8 Hot oxygen sensitization Modified by isocyanate Antimicrobial performance Photocatalytic antibacterial mechanism

来源：评论

学校读者我要写书评

暂无评论

Designing interstitial boron-doped tunnel-type vanadium dioxide cathode for enhancing zinc ion storage capability

引用

Carbon Energy 2023年第8期5卷 78-86页

作者： Shiwen Wang Hang Zhang Kang Zhao Wenqing Liu Nairui Luo Jianan Zhao Shide Wu Junwei Ding Shaoming Fang Fangyi Cheng Henan Provincial Key Laboratory of Surface&Interface Science College of Materials and Chemical EngineeringZhengzhou University of Light IndustryZhengzhouChina Key Laboratory of Advanced Energy Materials Chemistry(Ministry of Education) College of ChemistryNankai UniversityTianjinChina

Chemical doping is a powerful method to intrinsically tailor the electrochemical properties of electrode ***,an interstitial boron-doped tunnel-type VO_(2)(B)is constructed via a facile hydrothermal *** analysis techniques demonstrate that boron resides in the interstitial site of VO_(2)(B)and such interstitial doping can boost the zinc storage kinetics and structural stability of VO_(2)(B)cathode during ***,we found that the boron doping level has a saturation limit peculiarity as proved by the quantitative ***,the 2 at.%boron-doped VO_(2)(B)shows enhanced zinc ion storage performance with a high storage capacity of 281.7 mAh g^(-1) at 0.1 A g^(-1),excellent rate performance of 142.2 mAh g^(-1) at 20 A g^(-1),and long cycle stability up to 1000 cycles with the capacity retention of 133.3 mAh g^(-1) at 5 A g^(-1).Additionally,the successful preparation of the boron-doped tunneltype α-MnO_(2) further indicates that the interstitial boron doping approach is a general strategy,which supplies a new chance to design other types of functional electrode materials for multivalence batteries.

关键词： cathode interstitial boron doping tunnel-type VO_(2)(B) zinc ion battery

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：