检索结果-内蒙古大学图书馆

Asian control Conference

作者： Jinyu Li Hongchao Wei Chengda Lu Wangnian Li Quanxin Li Min Wu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Xi'an Research Institute Co. Ltd. China Coal Technology and Engineering Group Xi'an China

ISBN: (数字)9789887581598

ISBN: (纸本)9798331540845

In this paper, the effect of the initial state of the drilling system on trajectory tracking is taken into account in the directional drilling trajectory tracking control. Firstly, the trajectory model describing the two-dimensional drilling trajectory of the rotary steering system (RSS) is introduced. To improve the accuracy of trajectory tracking control and reduce the trajectory deviation, a fixed-time sliding mode control (FTSMC) method is introduced. Then, the stability of the closed-loop system is analyzed, and the range of controller parameters satisfying the stability condition is obtained. Finally, the effectiveness of the designed control strategy is verified by simulation experiments.

关键词： Drilling Upper bound Trajectory tracking Steering systems Stability analysis Trajectory Closed loop systems

来源：评论

学校读者我要写书评

暂无评论

Digital-Twin-Based Clock Synchronization in Industrial IoT systems

Digital-Twin-Based Clock Synchronization in Industrial IoT S...

引用

IEEE International Conference on Cyber Technology in Automation, control, and intelligent systems

作者： Ting Cheng Shuai Liu Qimin Xu Shanying Zhu Department of Automation Shanghai Jiao Tong University Shanghai China Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai China School of Control Science and Engineering Shandong University Jinan China

Close and efficient cooperation between devices in the Industrial Internet of Things (IIoT) requires precise clock synchronization as a prerequisite. The uncertainty of IIoT networks and the complexity of industrial environments have led to less precise clock synchronization achieved by traditional algorithms and higher network resource consumption. This paper proposes a digital-twin-based clock synchronization scheme for IIoT systems. By building the digital model for each local clock to predict their clock skew, the information interaction required to achieve synchronization is reduced. In order to model the clock accurately, this paper proposes to use the extended state Kalman filter to handle uncertain dynamics and unknown measurement bias to improve the estimation accuracy of clock skew further. The simulation results show that the proposed algorithm can achieve high- precision clock synchronization while reducing the consumption of network resources.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Spatial public goods games on any population structure

arXiv

引用

arXiv 2024年

作者： Wang, Chaoqian Su, Qi Department of Computational and Data Sciences George Mason University FairfaxVA22030 United States Department of Automation Shanghai Jiao Tong University Shanghai China Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai China Shanghai Engineering Research Center of Intelligent Control and Management Shanghai China

Understanding the emergence of cooperation in spatially structured populations has advanced significantly in the context of pairwise games, but the fundamental theory of group-based public goods games (PGGs) remains less explored. Here, we provide theoretical conditions under which cooperation thrive in spatial PGGs on any population structure, which are accurate under weak selection. We find that PGGs can support cooperation across all kinds of model details and on almost all network structures in contrast to pairwise games. For example, a class of networks that would otherwise fail to produce cooperation, such as star graphs, are particularly conducive to cooperation in spatial PGGs. This fundamental advantage of spatial PGGs derives from reciprocity through second-order interactions, allowing local structures such as the clustering coefficient to play positive roles. We also verify the robustness of spatial PGGs on empirical networks where pairwise games cannot support cooperation, which implies that PGGs could be a universal interaction mode in real-world systems. © 2024, CC BY.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Unsupervised Learning of 3D Scene Flow from Monocular Camera^*

Unsupervised Learning of 3D Scene Flow from Monocular Camera...

引用

IEEE International Conference on Robotics and Automation (ICRA)

作者： Guangming Wang Xiaoyu Tian Ruiqi Ding Hesheng Wang Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai China

Scene flow represents the motion of points in the 3D space, which is the counterpart of the optical flow that represents the motion of pixels in the 2D image. However, it is difficult to obtain the ground truth of scene flow in the real scenes, and recent studies are based on synthetic data for training. Therefore, how to train a scene flow network with unsupervised methods based on real-world data shows crucial significance. A novel unsupervised learning method for scene flow is proposed in this paper, which utilizes the images of two consecutive frames taken by monocular camera without the ground truth of scene flow for training. Our method realizes the goal that training scene flow network with real-world data, which bridges the gap between training data and test data and broadens the scope of available data for training. Unsupervised learning of scene flow in this paper mainly consists of two parts: (i) depth estimation and camera pose estimation, and (ii) scene flow estimation based on four different loss functions. Depth estimation and camera pose estimation obtain the depth maps and camera pose between two consecutive frames, which provide further information for the next scene flow estimation. After that, we used depth consistency loss, dynamic-static consistency loss, Chamfer loss, and Laplacian regularization loss to carry out unsupervised training of the scene flow network. To our knowledge, this is the first paper that realizes the unsupervised learning of 3D scene flow from monocular camera. The experiment results on KITTI show that our method for unsupervised learning of scene flow meets great performance compared to traditional methods Iterative Closest Point (ICP) and Fast Global Registration (FGR). The source code is available at: https://***/IRMVLab/3DUnMonoFlow.

关键词： Training Three-dimensional displays Laser radar Laplace equations Pose estimation Training data Cameras

来源：评论

学校读者我要写书评

暂无评论

Robust Simultaneous Tracking and Local Dense Structured Mapping at Scenes lack of Geometric Features

Robust Simultaneous Tracking and Local Dense Structured Mapp...

引用

International Conference on Mechatronics and Machine Vision in Practice (M2VIP)

作者： Yueling Shen Zhijian Qiao Xu Wang Hesheng Wang Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai China

ISBN: (纸本)9781665431545

In this paper, we present a simultaneous tracking and dense structured mapping method aimed at robotic tasks including obstacle avoidance, path planning and manipulation. This is achieved through (1) sparse-to-dense pose estimation with both keypoints and dense vertex images for keeping robust at scenes lack of geometric features, (2) dense local map algorithm, which clears map outside the neighborhood of the robot for the consistency of the system at large-scale scenes, (3) structured analysis to obtain elevation and norms of surfaces, (4) the proposed dynamic mode for ghosting-free mapping in dynamic scenes. Experiments are conducted to evaluate each part of the system. The effectiveness and efficiency are proved by quantitative experiments.

关键词： Meters Surface reconstruction Three-dimensional displays Mechatronics Heuristic algorithms Pose estimation Path planning

来源：评论

学校读者我要写书评

暂无评论

Robot-CT Scanning Oriented Synchronous Trajectory Planning of a Dual-Manipulator system

Robot-CT Scanning Oriented Synchronous Trajectory Planning o...

引用

Chinese control Conference (CCC)

作者： Shuaikang Zhang Mingxing Yuan Xuebo Zhang Tianjin Key Laboratory of Intelligent Robotics Institute of Robotics and Automatic Information System College of Artificial Intelligence Nankai University Tianjin P. R. China Key Laboratory of Industrial Internet of Things & Networked Control Ministry of Education Chongqing P. R. China

At present, most CT scanning systems adopt the traditional horizontal O-frame, suspension or C-arm structures, which can not balance the flexibility and functionality. With the development of robot technology, CT scanning systems based on manipulators have gradually emerged. However, limited by the motion accuracy of the manipulator, most researchers sacrifice the flexibility or increase the mass to improve the accuracy. To overcome this limitation, a new master-slave teaching-based scanning method is proposed to improve the scanning accuracy of the dual-manipulator Robot-CT system with the auxiliary function of rigid links. First, a rigid link is employed to connect the end effectors of the two manipulators. Next, the sampled trajectory of each joint of the slave-manipulator is recorded while the master-manipulator pulls the slave-manipulator to perform a circular motion. Finally, when carrying out the scanning, the dual-manilupator system reproduces the recorded joint trajectory without the rigid element, thereby improving the accuracy of the dual-manipulator CT scanning system to achieve a high-accuracy spatiotemporal synchronization and alignment of pose. To this end, a fifth-order spline interpolation is used to interpolate the sampled trajectory of each joint of the slave-manipulator, which allows it to perfectly reproduce the joint trajectory recorded during the teaching process and ensures the smoothness of the angular velocity and acceleration curves. Simulations are investigated and the corresponding results confirm the effectiveness of the trajectory planning method of the slave-manipulator.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Direction-Constrained control for Efficient Physical Human-Robot Interaction under Hierarchical Tasks

arXiv

引用

arXiv 2024年

作者： Xu, Mengxin Wan, Weiwei Wang, Hesheng Harada, Kensuke Department of Automation Shanghai Jiao Tong University Shanghai200240 China Department of System Innovation Graduate School of Engineering Science Osaka University Toyonaka Osaka560-0043 Japan Department of Automation the Key Laboratory of System Control and Information Processing of Ministry of Education the Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China

This paper proposes a control method to address the physical Human-Robot Interaction (pHRI) challenge in the context of hierarchical tasks. A common approach to managing hierarchical tasks is Hierarchical Quadratic Programming (HQP), which, however, cannot be directly applied to human interaction due to its allowance of arbitrary velocity direction adjustments. To resolve this limitation, we introduce the concept of directional constraints and develop a direction-constrained optimization algorithm to handle the nonlinearities induced by these constraints. The algorithm solves two sub-problems, minimizing the error and minimizing the deviation angle, in parallel, and combines the results of the two sub-problems to produce a final optimal outcome. The mutual influence between these two sub-problems is analyzed to determine the best parameter for combination. Additionally, the velocity objective in our control framework is computed using a variable admittance controller. Traditional admittance control does not account for constraints. To address this issue, we propose a variable admittance control method to adjust control objectives dynamically. The method helps reduce the deviation between robot velocity and human intention at the constraint boundaries, thereby enhancing interaction efficiency. We evaluate the proposed method in scenarios where a human operator physically interacts with a 7-degree-of-freedom robotic arm. The results highlight the importance of incorporating directional constraints in pHRI for hierarchical tasks. Compared to existing methods, our approach generates smoother robotic trajectories during interaction while avoiding interaction delays at the constraint boundaries. Copyright © 2024, The Authors. All rights reserved.

关键词： Constrained optimization

来源：评论

学校读者我要写书评

暂无评论

Stability and Bifurcation control of Fractional-Order Coupled Hindmarsh-Rose Neural Networks

Stability and Bifurcation Control of Fractional-Order Couple...

引用

Chinese control Conference (CCC)

作者： Feng Liu Feifan Zhou Wei Wang Gang Cai Hua O Wang Xiuqin Yang School of Automation China University of Geosciences Wuhan China Engineering Research Center of Ministry of education for intelligent technology of earth exploration Hubei key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Department of Mechanical Engineering Boston University Boston USA School of Education Minzu University of China Beijing China

This article investigates a fractional-order coupled Hindmarsh-Rose neural networks model. Firstly, the existence and stability of an equilibrium point in the system are verified. Then, the periodic bifurcation behavior of the system on a two-parameter plane is studied, and numerical simulations show the existence of both non -chaotic and chaotic plus periodic bifurcation behavior on the two-parameter plane. Finally, a feedback controller was designed to stabilize the bifurcation point of the delayed system and increase the stable range of the system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Sensor-based Multi-Robot Coverage control with Spatial Separation in Unstructured Environments

Sensor-based Multi-Robot Coverage Control with Spatial Separ...

引用

IEEE International Conference on Robotics and Automation (ICRA)

作者： Xinyi Wang Jiwen Xu Chuanxiang Gao Yizhou Chen Jihan Zhang Chenggang Wang Yulong Ding Ben M. Chen Department of Mechanical and Automation Engineering The Chinese University of Hong Kong Shatin N.T. Hong Kong China Department of Automation Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai Jiao Tong University Shanghai P. R. China Department of Control Science and Engineering Tongji University Shanghai China Frontiers Science Center for Intelligent Autonomous Systems Ministry of Education China

ISBN: (数字)9798350384574

ISBN: (纸本)9798350384581

Multi-robot systems have increasingly become instrumental in tackling coverage problems. However, the challenge of optimizing task efficiency without compromising task success still persists, particularly in expansive, unstructured scenarios with dense obstacles. This paper presents an innovative, decentralized Voronoi-based coverage control approach to reactively navigate these complexities while guaranteeing safety. This approach leverages the active sensing capabilities of multi-robot systems to supplement GIS (Geographic Information system), offering a more comprehensive and real-time understanding of environments like post-disaster. Based on point cloud data, which is inherently non-convex and unstructured, this method efficiently generates collision-free Voronoi regions using only local sensing information through spatial decomposition and spherical mirroring techniques. Then, deadlock-aware guided map integrated with a gradient-optimized, centroid Voronoi-based coverage control policy, is constructed to improve efficiency by avoiding exhaustive searches and local sensing pitfalls. The effectiveness of our algorithm has been validated through extensive numerical simulations in high-fidelity environments, demonstrating significant improvements in task success rate, coverage ratio, and task execution time compared with others.

关键词： Point cloud compression system recovery Robot sensing systems Sensors Safety Multi-robot systems Task analysis

来源：评论

学校读者我要写书评

暂无评论

Surface Defect Detection Based on Deep Learning and Collaborative Cloud-edge Computation 7

Surface Defect Detection Based on Deep Learning and Collabor...

引用

7th International Conference on Computer and Communications, ICCC 2021

作者： He, Shunjie Yang, Bo Zhu, Dafeng Li, Cheng Shanghai Jiao Tong University Department of Automation Shanghai200240 China Key Laboratory of System Control and Information Processing Ministry of Education of China Shanghai200240 China Shanghai Engineering Research Center of Industrial Intelligent Control and Management Shanghai200240 China

ISBN: (纸本)9781665409506

Surface defect detection is a fundamental step of quality management. Nowadays, surface defect detection system based on machine vision technology has made great progress which can gradually replace the human inspector. With the help of convolutional neural networks, the accuracy and stability of the surface defect detection algorithm are improving rapidly. However, it is difficult to process the images which have small defect areas and complex backgrounds. Furthermore, lacking defective samples and limited computation resources are also tough problems. To deal with these problems, a two-stage algorithm combined with object detection and classification networks is proposed. Transform learning and data augmentation are used to deal with the problem of lacking defect samples. Besides, a detection system based on collaborative cloud-edge computation is designed to improve the performance of the algorithm. The result shows that the proposed method has high performance and low requirements of computation resources. © 2021 IEEE.

关键词： Computer vision

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：