检索结果-内蒙古大学图书馆

arXiv 2021年

作者： Kopp, Philipp Rank, Ernst Calo, Victor M. Kollmannsberger, Stefan Computational Modeling and Simulation Technical University of Munich Germany Computation in Engineering Technical University of Munich Germany Institute for Advanced Study Technical University of Munich Germany Applied Mathematics School of Electrical Engineering Computing & Mathematical Science Faculty of Science and Engineering Curtin University Australia

We present an efficient algorithmic framework for constructing multi-level hp-bases that uses a data-oriented approach that easily extends to any number of dimensions and provides a natural framework for performance-optimized implementations. We only operate on the bounding faces of finite elements without considering their lower-dimensional topological features and demonstrate the potential of the presented methods using a newly written open-source library. First, we analyze a Fichera corner and show that the framework does not increase runtime and memory consumption when compared against the classical p-version of the finite element method. Then, we compute a transient example with dynamic refinement and derefinement, where we also obtain the expected convergence rates and excellent performance in computing time and memory usage. ©2022TheAuthor(s).*** (http://***/licenses/by/4.0/). © 2021, CC BY.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

Initial Analysis of Plastic Debris Accumulation in the Estuary of Wonorejo River, Surabaya, Indonesia 6

Initial Analysis of Plastic Debris Accumulation in the Estua...

引用

6th Environmental Technology and Management Conference, ETMC 2019

作者： Kurniawan, Setyo Budi Imron, Muhammad Fauzul Department of Chemical and Bioprocess Engineering Faculty of Engineering and Built Environment Universiti Kebangsaan Malaysia Bangi Selangor43600 Malaysia Department of Environmental Engineering Faculty of Civil Environmental and Geo Engineering Institut Teknologi Sepuluh Nopember Kampus ITS Keputih Sukolilo Surabaya60111 Indonesia Study Program of Environmental Engineering Department of Biology Faculty of Science and Technology Universitas Airlangga Kampus C UNAIR Jalan Mulyorejo Surabaya60115 Indonesia

The purpose of this research was to investigate the accumulation of plastic debris in the Wonorejo River Estuary, Surabaya, Indonesia. Visible plastic debris were collected from three (3) sampling points along the intertidal area of Wonorejo River Estuary. The correlation between sampling points (SPs) and the amount of the collected plastic debris (CPD) was analysed using one-way ANOVA. Result of one-way ANOVA showed that the sampling point was significantly affect the amount of the collected plastic debris (p2 from SP1, 375.97±16.72 g dry weight/m2 from SP2, and 291.13±36.28 g dry weight/m2 from SP3. The highest percentage of collected debris item was plastic bags (up to 57.90%), followed by bottle caps (up to 16.65%). The most identified plastic types were Low-Density Polyethylene (LDPE) (up to 73.13%), followed by Polypropylene (PP) (up to 17.22%). Understanding the accumulation of plastic debris in estuary is a fundamental requirement to conduct an advance research related to the marine plastic pollution and to determine further actions to solve this problem. © 2020 The Authors, published by EDP sciences.

关键词： Analysis of variance (ANOVA)

来源：评论

学校读者我要写书评

暂无评论

Optimization of Extrusion Parameters for Composite Pla/Mg/Ha Filaments Using the Taguchi Method for Bone Scaffold

SSRN

引用

SSRN 2025年

作者： Prakoso, Akbar Teguh Basri, Hasan Adanta, Dendy Gunawan Akbar, Imam Syahrom, Ardiyansyah Arifin, Amir Department of Mechanical Engineering Faculty of Engineering Universitas Sriwijaya Indralaya South Sumatra 30662 Indonesia Doctoral Program Study of Engineering Science Faculty of Engineering Universitas Sriwijaya Palembang South Sumatra30139 Indonesia Applied Mechanics and Design Faculty of Mechanical Engineering Universiti Teknologi Malaysia Johor Bahru Skudai81310 Malaysia Universiti Teknologi Malaysia Johor Bahru Skudai81310 Malaysia

This paper attempts to optimise the single screw extrusion (SSE) process parameters for extruding polylactic acid (PLA)/magnesium (Mg)/hydroxyapatite (HA) composite filament, aiming for a final filament diameter of 1.75 mm to enhance process efficiency and output quality. In this study, the Taguchi method was employed to systematically evaluate how screw speed, nozzle diameter, material composition, and temperature affect filament diameter. The analysis demonstrated that screw speed, nozzle diameter, material composition, and temperature significantly affect the filament diameter. Under optimal conditions (94% wt PLA, 4% wt Mg, and 2% wt HA, 1.95 mm nozzle diameter, 6 rpm screw speed, and 175°C), the resulting filament diameter closely approached 1.75 mm. These findings enhance the fabrication efficiency and quality of composite filaments, with promising applications in advanced bone scaffolds. © 2025, The Authors. All rights reserved.

关键词： Scaffolds (biology)

来源：评论

学校读者我要写书评

暂无评论

Characteristic of beef tallow/rice husk charcoal/plaster composite phase change materials

引用

AIP Conference Proceedings 2023年第1期2568卷

作者： I. Made Astika I. Nyoman Suprapta Winaya I. Ketut Gede Wirawan Akhmad Herman Yuwono I. Dewa Gede Ary Subagia 1Doctoral Study Program of Engineering Science Faculty of Engineering Udayana University Kampus Sudirman Denpasar Bali 80234 Indonesia. 2Study Program of Mechanical Engineering Faculty of Engineering Udayana University Kampus Bukit Jimbaran Badung Bali 80361 Indonesia 3Department of Metallurgy and Materials Engineering Faculty of Engineering Universitas Indonesia Kampus Baru UI Depok Depok 16424 Indonesia

Composite materials are a combination of several materials to form a new material with specific properties. Chemical compatibility of the constituent materials is a factor that affects the characteristics of composite materials. Currently, composite phase change materials (PCM) are commonly applied as thermal energy storage systems. This study investigated the characteristics of beef tallow/rice husk charcoal/plaster PCM composite. The weight fraction of rice husk charcoal used was 10%. To prevent leakage of beef tallow from the composite structure, the researcher used polyvinyl acetate (PVAc) to cover the tallow/RHC composite before mixing it with plaster material. As much as 30% of the tallow/RHC/PVAc composite weight fraction is integrated into the plaster. PCM composite was made by using a direct incorporation method. The FTIR test results on the PCM composites produced showed good chemical compatibility among different components. The scanning electron microscope results showed the formation of microcapsules where the rice husk charcoal and polyvinyl acetate functions as a wrapper/capsule for beef tallow. This composite is suitable for application in building walls as thermal energy storage.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Reconstructing Suspended Sediment Concentrations in the Mekong River Basin Via Semi-Supervised-Based Deep Neural Networks

SSRN

引用

SSRN 2024年

作者： Nguyen, Thi-Thu-Ha Vu, Duc Quang Doan, Ngoc Phu Thi Khanh Chi, Huynh Li, Peixin Van Binh, Doan An, Yimeng Tuan Dung, Pham Hoang, Tuan A. Thai Son, Mai Laboratory of Environmental Sciences and Climate Change Institute for Computational Science and Artificial Intelligence Van Lang University Ho Chi Minh City70000 Viet Nam Faculty of Environment School of Technology Van Lang University Ho Chi Minh City70000 Viet Nam Department of Computer Science and Information System Thai Nguyen University of Education Viet Nam School of Electronics Electrical Engineering and Computer Science Queen’s University Belfast United Kingdom College of Economics and Management Nanjing University of Aeronautics and Astronautics China Master program in Water Technology Reuse and Management Faculty of Engineering Vietnamese-German University Binh Duong Province Ben Cat Town820000 Viet Nam

The Mekong River Basin (MRB) is one of the highest biodiversity areas in the world and is the vital source of livelihoods for more than 60 millions of people over six countries in Southeast Asia. However, it is suffering from a severe sediment starvation problem caused by climate change and human activities, particularly dam constructions. Understanding long-term sediment changes thus plays a crucial role for management and contingency plans. Current sediment concentration data in the MRB are extremely sporadic, making it a non-trivial task to analyze them. This paper focuses on the sediment reconstruction to provide long-term reliable suspended sediment concentration (SSC) data using Machine Learning (ML) perspectives. In particular, a novel semi-supervised ML model, which can effectively deal with data sparsity, is introduced to predict/reconstruct missing sediment data. The key idea of this approach is to exploit abundant available hydroclimate data to reduce training overfitting rather than solely relying on sediment concentration data, thus enhancing the accuracy of the employed ML models. Extensive experiments on data obtained from 1979 to 2019 at the three main stations (i.e., Chiang Saen, Nong Khai, and Mukdahan) are conducted to demonstrate the performances of the proposed method compared to other state-of-the-art supervised techniques and traditional simulation methods commonly used in previous sediment forecasting/reconstruction studies. To the best of our knowledge, this approach is the first semi-supervised method to reconstruct sediment data in the field. Though this study focuses on the MRB, sediment sparsity is a very common problem in other river systems worldwide. Thus, this method can be widely applied for them for more effective sediment reconstruction/prediction in general. © 2024, The Authors. All rights reserved.

关键词： Biodiversity

来源：评论

学校读者我要写书评

暂无评论

Biomass waste as an alternative source of carbon and silicon-based absorbents for CO2 capturing application

引用

Chemosphere 2023年 343卷

作者： Suresh, R. Gnanasekaran, Lalitha Rajendran, Saravanan Jalil, A.A. Soto-Moscoso, Matias Khoo, Kuan Shiong Ma, Zengling Halimatul Munawaroh, Heli Siti Show, Pau Loke Departamento de Ingeniería Mecánica Facultad de Ingeniería Universidad de Tarapacá Avda. General Velásquez 1775 Arica Chile University Centre for Research & Development Department of Mechanical Engineering Chandigarh University Punjab Mohali140413 India Department of Chemical Engineering Lebanese American University Byblos Lebanon Centre of Hydrogen Energy Institute of Future Energy Johor UTM Johor Bahru81310 Malaysia Faculty of Chemical and Energy Engineering Universiti Teknologi Malaysia Johor UTM Johor Bahru81310 Malaysia Universidad Autónoma de Chile Chile Department of Chemical Engineering and Materials Science Yuan Ze University Taoyuan Taiwan Centre for Herbal Pharmacology and Environmental Sustainability Chettinad Hospital and Research Institute Chettinad Academy of Research and Education Tamil Nadu Kelambakkam603103 India Zhejiang Provincial Key Laboratory for Subtropical Water Environment and Marine Biological Resources Protection Wenzhou University Wenzhou325035 China Study Program of Chemistry Faculty of Mathematics and Science Education Universitas Pendidikan Indonesia Jalan Dr. Setiabudhi 229 Bandung40154 Indonesia Department of Chemical Engineering Khalifa University P.O. Box 127788 Abu Dhabi United Arab Emirates Department of Chemical and Environmental Engineering Faculty of Science and Engineering University of Nottingham Malaysia Jalan Broga Selangor Darul Ehsan Semenyih Malaysia

The production of low-cost solid adsorbents for carbon dioxide (CO2) capture has gained massive consideration. Biomass wastes are preferred as precursors for synthesis of CO2 solid adsorbents, due to their high CO2 adsorption efficiency, and ease of scalable low-cost production. This review particularly focuses on waste biomass-derived adsorbents with their CO2 adsorption performances. Specifically, studies related to carbon (biochar and activated carbon) and silicon (silicates and geopolymers)-based adsorbents were summarized. The impact of experimental parameters including nature of biomass, synthesis route, carbonization temperature and type of activation methods on the CO2 adsorption capacities of biomass-derived pure carbon and silicon-based adsorbents were evaluated. The development of various enhancement strategies on biomass-derived adsorbents for CO2 capture and their responsible factors that impact adsorbent's CO2 capture proficiency were also reviewed. The possible CO2 adsorption mechanisms on the adsorbent's surface were highlighted. The challenges and research gaps identified in this research area have also been emphasized, which will help as further research prospects. © 2023 Elsevier Ltd

关键词： Carbon dioxide

来源：评论

学校读者我要写书评

暂无评论

Integration of Artificial Intelligence in Software Defined Networking Technology through Developing Machine Learning Algorithms

Integration of Artificial Intelligence in Software Defined N...

引用

Advance Computing and Innovative Technologies in engineering (ICACITE), International Conference on

作者： Lamhot Naibaho Pulkit Raj Saxena Kuldeep Sharma Badria Sulaiman Alfurhood L. Pallavi Bhasker Pant English Language Education Study Program Faculty of Letters and Languages Christian University of Indonesia College of Computing Science and Information Technology Teer Thanker Mahaveer University Moradabad Uttar Pradesh India Department of Computer Science and Engineering Lovely Professional University Phagwara Jalandhar Punjab India Department of Computer Sciences College of Computer Information Sciences Princess Nourah Bint Abdulrahman University Saudi Arabia CSE B V Raju Institute of Technology Narsapur Telangana India Computer Science & Engineering Graphic Era Deemed to be University Dehradun Uttarakhand India

A future networking design called "software-defined networking" combines network programmability with centralized administration (SDN). Network administration is currently handled by SDN, which, at the regulator, which acts as the cable network processor and divides the data plane into a control plane and a data aircraft. Recent breakthroughs in artificial intelligence (Al) have shown a stronger inclination for the science community to benefit from their ability to give learning capabilities and enhance Indicator. The author of this research provides a comprehensive analysis of initiatives underway to incorporate Al with SDN. The study concluded that the three primary Al thread where scientific research was centered were computer science, conceptual, and fuzzy reasoning systems. The authors of this paper explore the several fields in which these approaches may be used, their potential future applications, and the innovations made possible by the integration of AI-based methods into the SDN paradigm. By choosing the right SDN controller, any large organization may lower network complexity, implementation expenses, and maintenance costs. The focus of this article is software defined networking's benefits and downsides (SDN). Following is a basic explanation of artificial intelligence and a list of some of its most significant applications in SDN.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Power Transfer Analysis Using UPQC-PV System Under Sag and Interruption With Variable Irradiance

Power Transfer Analysis Using UPQC-PV System Under Sag and I...

引用

Smart Technology and Applications (ICoSTA), 2020 International Conference on

作者： Amirullah Adi Soeprijanto Adiananda Ontoseno Penangsang Electrical Engineering Study Program Faculty of Engineering Universitas Bhayangkara Surabaya Surabaya Indonesia Department of Electrical Engineering Institut Teknologi Sepuluh Nopember Surabaya Indonesia

ISBN: (数字)9781728130835

ISBN: (纸本)9781728130842

This paper presents an analysis of the Unified Power Quality Conditioner-Photovoltaic (UPQC-PV) system under sag and interruption voltage with variable irradiance. The PV is connected to a three-phase three-wire (3P3W) distribution system with 380 volts (L-L) and a frequency of 50 hertz, through UPQC-DC link. This system is used to maintain and supply sensitive loads. This paper shows that in the sag voltage and irradiance levels of 200 W/m 2 to 1200 W/m 2 , the 3P3W system uses UPQC-PV with proportional-integral (PI) still able to maintain the active load power above 3714 W. However, in the interruption voltage and same irradiance level, the load active power drops to between 2560 W and 2805 W. This research also shows that in the sag voltage and same irradiance levels, the 3P3W system uses UPQC-PV with PI still able to generate PV power between 500 W to 920 W. In the interruption voltage and same irradiance levels, the power that can be generated by PV increases between 1300 W to 1635 W. Otherwise, at 25 0 C and 1000 W/m 2 , the increase in PV power on interruption voltage has not been able to meet the load active power consumption, so it finally drops to 2650 W. This paper is simulated using Matlab/Simulink.

关键词： UPQC Photovoltaic Sag Interruption Irradiance interruption irradiance interrupters PHOTOVOLTAIC Tungsten Light intensity Polydnaviridae VOLTAGE

来源：评论

学校读者我要写书评

暂无评论

Electricity Savings Using Passive Filters 1

Electricity Savings Using Passive Filters

引用

1st International Conference on Vocational Education and Technology, ICONVET 2018

作者： Ratnaya, I.G. Santiyadnya, N. Suka Arsa, I.P. Electrical Engineering Education Study Program Technical and Vocational Faculty Universitas Pendidikan Ganesha Indonesia

This study aims to provide knowledge in order to save electricity consumption. The use of electrical energy is recorded at KWH meters. Saving electricity means limiting the use of electrical energy according to need. The use of electrical energy is based on the use of electrical power. Technically, this dimmer serves to regulate the use of electrical power. Some electrical equipment has been equipped with dimmers to regulate the operation of the equipment in accordance with the user's want, yet there are still many electrical equipment that is not equipped with dimmers. This is a problem in the efforts to save electricity. The method used in this study is applying passive components in electricity such as inductors, capacitors and resistors. These passive components are arranged to be used as filter circuits. With a 21 mH inductor with an air core, Farad's 12.5 micro capacitor, and 4.7 ohm resistor can be made as a passive filter that is installed before electric loads. The use of this filter circuit can save the use of electricity up to 15% at a load current of 2 amperes. Thus, electricity bill payments can be reduced by up to 15%. In the future, this research can be continued to improve the efficiency of electricity consumption by modifying passive filters. © 2019 Published under licence by IOP Publishing Ltd.

关键词： Passive filters

来源：评论

学校读者我要写书评

暂无评论

Comparison design of electric motorcycles using hybrid systems (BLDC motor) on 150Cc motorcycles based on parameter testing

引用

AIP Conference Proceedings 2023年第1期2592卷

作者： Pawenary S. Azzahra Hastuti Azis H. Andre A. S. Prabuwono Electrical Technology Study Program Faculty of Electricity and Renewable Energy PLN Institute of Technology Jakarta Indonesia Department of Electrical Engineering Faculty of Engineering Universitas Andalas Padang Indonesia Rabigh Faculty of Computer and Information Technology (FCITR) King Abdulaziz University Jeddah Saudi Arabiaa

This study aims to know the comparison design of electric motorcycle using hybrid systems (BLDC Motor) based on parameter testing, i.e., with and without load. The design of electric motorcycles is centered on determining a feasibility study comparing engine drive with electric drive. Electric vehicles are the answer to decreasing petroleum supplies and environmental concerns that are worsening every year due to oil-fueled cars’ exhaust emissions. The proportion of motor vehicle exhaust as an air pollution source is between 60 and 70 percent. The global decrease of fossil fuels is also a critical issue that has yet to be handled. A descriptive statistic methodology was employed in this work as an analytical tool. The results showed when the speed increases, the efficiency of the BLDC motor would increase; this is, of course, following the principle of Orsted’s law and Lorentz force. When compared to the no-load test, the efficiency by using the load will be greater because when the BLDC motor works with a load, it will require greater torque due to an increase in load so that it takes a large amount of power so that it will increase the efficiency of the BLDC motor. When compared in terms of using the battery, the time of using the battery with no load will be longer because it does not require too much current.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：