检索结果-内蒙古大学图书馆

AUTOMATION OF PROPELLER INSPECTION AND FINISHING

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 124-131页

作者： STERN, H METZGER, R Howard K. Stern:is presently vice president of Robotic Vision Systems Inc. He received a bachelor of electrical engineering degree from College of the City of New York in 1960. Mr. Stern joined Dynell Electronics Corporation in 1971 and became part of the Robotic Vision Systems Inc. staff at the time of its spin-off from Dynell. He was program manager of the various three-dimensional sensing and replication systems constructed by Dynell and Robotic Vision Systems. As program manager his responsibilities encompassed technical administrative and operational areas. The first two portrait sculpture studio systems and the first three replication systems built by Robotic Vision Systems Inc. were designed manufactured and operated under his direction. Before joining Dynell Mr. Stern was a senior engineer at Instrument Systems Corporation and chief engineer of the Special Products Division of General Instrument Corporation. Prior to these positions Mr. Stern was chief engineer of Edo Commercial Corporation. At General Instrument and Edo Commercial he was responsible for the design and manufacture of military and commercial avionics equipment. Mr. Stern is presently responsible for directing the systems design and development for all of the company's programs. Robert J. Metzger:is currently engineering group leader at Robotic Vision Systems Inc. He graduated summa cum laude from the Cooper Union in 1972 with a bachelor of electrical engineering degree. Under sponsorship of a National Science Foundation graduate fellowship he graduated from the Massachusetts Institute of Technology in 1974 with the degrees of electrical engineer and master of science (electrical engineering). In 1979 Mr. Metzger graduated from Polytechnic Institute of New York with the degree of master of science (computer science). Since 1974 Mr. Metzger has been actively engaged in the design of systems and software for noncontact threedimensional optical measurement for both military and commercial applications. Of particular note are his c

Ship's propellers are currently measured by manual procedures using pitchometers, templates and gauges. This measurement process is extremely tedious, labor intensive and time consuming. In an effort to provide increased accuracy, repeatability and cost effectiveness in propeller manufacture, an automated propeller optical measurement system (APOMS) has been built which rapidly and automatically scans an entire ship's propeller using a 3-D vision sensor. This equipment is integrated with a propeller robotic automated templating system (PRATS) and the propeller optical finishing system (PROFS) which robotically template and grind the propeller to its final shape, using the APOMS-derived data for control feedback. The optical scanning and the final shape are both controlled by CAD/CAM data files describing the desired propeller shape. An automated propeller balancing system is incorporated into the PROFS equipment. The APOMS/PRATS/PROFS equipment is expected to provide lower propeller manufacturing costs.

关键词： PROPELLERS

来源：评论

学校读者我要写书评

暂无评论

AIR-CUSHION LANDING CRAFT NAVIGATION

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

THE MACHINERY ALTERATION program

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 138-145页

作者： CIERI, AM KENNEY, LH A.M. Cieri:is the program manager for the Machinery Alteration (MachAlt) Program at the Naval Ship Systems Engineering Station (NAVSSES). Mr. Cieri also currently serves as the head Fleet Liaison Unit Atlantic at NAVSSES. He working with Mr. E.T. Kinney Deputy Director Machinery Group Ship Design and Engineering Directorate (SEA 56B) Naval Sea Systems Command (NAVSEA) conceived and structured the policy and procedures for the MachAlt Program in FY 83 as a result of a need identified by COMNAVSEA's ShipAlt Improvement Program. Mr. Cieri has been with the NAVSSES (formerly NAVSEC Philadelphia) organization since 1971. He served in the Hull and Deck Machinery Department before moving to his current staff position in 1982. His 23 years of federal service also includes nine years with the Philadelphia Naval Shipyard in various assignments in both the planning and production departments. Mr. Cieri has been a member of ASNE since 1979. Mr. Cieri was the recipient of the Joseph Cacciola Technical Achievement Award at NAVSSES in 1984. USN CDR. L.H. Kenney USN:was commissioned out of the Naval Reserve Officers Training Corps at Massachusetts Institute of Technology where he received his bachelor of science. He holds a master's degree in electrical engineering from the Naval Postgraduate School. He has served at the Philadelphia and Boston Naval Shipyards the headquarters of the Naval Sea Systems Command and its predecessor NAVSHIPS as staff officer to Commander Service Squadron Six in the Mediterranean in the USS Essex and with the Joint Military Assistance and Advisory Group Tehran. He is currently the director of Fleet Coordination Office at the Naval Ship Systems Engineering Station in Philadelphia.

The ship alteration (ShipAlt) process does not lend itself to the rapid accomplishment of small scale design changes to improve equipment performance and reliability. It is a necessarily lengthy and complex system, designed to deal with very large and costly projects. With one document, it causes replacement or modification of major ship systems. For this reason, ShipAlts are subjected to many reviews and design changes so that the final product will materially enhance the fleet's operational capabilities. The competition for scarce resources has left the Navy with a large number of needed design changes with no programmatic means to accomplish them. Various Navy communities have developed procedures to address this problem. This paper will show how the Naval Sea Systems Command-sponsored machinery alteration (MachAlt) program addresses the small design change problem for hull, mechanical and electrical (HM&E) systems. MachAlts are design changes to equipments that do not require system interface changes and may be installed outside of industrial activities. The paper will discuss how the MachAlt concept was developed and will give a status report and assessment of the program to date.

关键词： NAVAL VESSELS

来源：评论

学校读者我要写书评

暂无评论

ON THE PERFORMANCE OF ISOLATED WORD SPEECH RECOGNIZERS USING VECTOR QUANTIZATION AND TEMPORAL ENERGY CONTOURS

引用

AT&T BELL LABORATORIES TECHNICAL JOURNAL 1984年第7期63卷 1245-1260页

作者： RABINER, LR PAN, KC SOONG, FK AT&T Bell Laboratories. Lawrence R. Rabiner: S.B. and S.M. 1964 Ph.D. 1967 (Electrical Engineering) The Massachusetts Institute of Technology AT&T Bell Laboratories 1962—. Kok-Chin Pan: S.B. and S.M. 1984 (Electrical Engineering and Computer Science) The Massachusetts Institute of Technology. From 1981 to 1984 Mr. Pan participated in a cooperative program in Electrical Engineering and Computer Science at AT&T Bell Laboratories. Frank K. Soong: B.S. 1973 National Taiwan University M.S. 1977 University of Rhode Island Ph.D. 1983 Stanford University all in Electrical Engineering AT&T Bell Laboratories 1982—.

In this paper we present results of a series of experiments in which combinations of vector quantization and temporal energy contours are incorporated into the standard framework for the word recognizer. We consider two distinct word vocabularies, namely, a set of 10 digits, and a 129-word airlines vocabulary. We show that the incorporation of energy leads to small but consistent improvements in performance for the digits vocabulary; the incorporation of vector quantization (in a judicious manner) leads to small degradation in performance for both vocabularies, but at the same time reduces overall computation of the recognizer by a significant amount. We conclude that a high-performance, moderate-computation, isolated word recognizer can be achieved using vector quantization and the temporal energy contour.

关键词：

来源：评论

学校读者我要写书评

暂无评论

FFG 7 CLASS FIN STABILIZER SYSTEM

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 62-68页

作者： DONAHUE, JC MCMAHON, EJ NELSON, LW Commander John C. Donahue USN:is the Deputy Technical Director for NAVSEA PMS 399 the FFG 7 class Acquisition Project Office. In addition he is the FFG 7 class Fin Stabilizer System Program Manager. Cdr. Donahue is an Engineering Duty Officer and Surface Warfare Officer who holds a BS in marine engineering from the California Maritime Academy a BS in business administration and an MS in material management from the Naval Postgraduate School. He is a designated Weapons Systems Acquisition Manager. Cdr. Donahue's sea service includes three tours culminating as chief engineer in USSFarragut (DLG-6) during that ship's complex overhaul as the DLG pilot ship for the 1200 PSI improvement program. Significant shore duty includes the Philadelphia Naval Shipyard where he served as theBelknapproject officer during that ship's repair restoration and modernization following its collision with USSJohn F. Kennedy (CV-67) Assistant Sixth Fleet Maintenance Officer and the Naval Research Laboratory. Cdr. Donahue was the charter president of the ASNE Section at the Naval Postgraduate School. Edward J. McMahon:is founder and President Reliability Sciences Incorporated (RSI) and has been supporting NAVSEA on the FFG 7 Class fin stabilizer system procurement since 1977. Mr. McMahon has a BSME from New Jersey Institute of Technology and has done graduate work in electrical engineering operations research and engineering administration at New Jersey Institute of Technology Seton Hall University University of Alabama and George Washington University. He has authored and presented various papers on reliability and electrostatic discharge control and coauthored a book Electrostatic Discharge Control — Successful Methods for Microelectronics Design and Manufacturingpublished by Hayden Publishing Company 1983. Mr. McMahon is a registered Professional Engineer and listed in Who's Who 1977 1978 1982 and 1983. Louis W. Nelson:is an electrical engineer with the NAVSEA Surface Ship Control and Hydraulic System Branch where he ha

This paper discusses the new fin stabilizer system developed for the FFG 7 class ships. The paper includes: a brief history of fin stabilizers, the advantages of fin stabilizers on Navy combatants, brief theory of system operation, the approaches used in system development, and an up to date program status. This paper furthers Nelson and McCallum's paper [1] which addresses the infancy of the FFG 7 fin stabilizer system development program.

关键词：

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form Design System (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

ON DECOMPOSITION-THEORY - DUALITY

引用

IEEE TRANSACTIONS ON SYSTEMS MAN AND CYBERNETICS 1983年第2期13卷 215-221页

作者： NAYLOR, AW Graduate Program in Computer Information and Control Engineering and theDepartment of Electrical and Computer Engineering University of Michigan Ann Arbor MI USA Industrial Technology Institute Ann Arbor MI USA

Decomposition theory is concerned with the structures that arise in the decomposition of systems. It states from the premise that any method of system decomposition is based, either explicitly or implicitly, on some concept of dependence. The formal setting of decomposition theory is the dependence, an ordered-triple ( E , M , D ), where E is a nonempty set, M is a collection of subsets of E , and D is a relation from nonempty subsets of M to subsets of M . If ( A , B )∈ D , it is said that ` A depends on B '. Duality is considered here. In particular, given a dependence ( E , M , D ), its dual is a dependence ( E , M , D '). Duality plays a role here similar to duality in other formal systems such as graphs, matroids, lattices, circuits, control systems, and so forth. It deepens our understanding of dependence by pairing seemingly different concepts.

关键词： Bismuth Cybernetics Computers Random variables Lattices Control systems Missiles

来源：评论

学校读者我要写书评

暂无评论

Repair of TMI-1 OTSG tube failures. Use of a kinetic tube-expansion process to resesal tubes within the upper tube sheet provides a cost-effective and relatively low-expousure repair process

引用

Process Safety Progress 1983年第3期2卷 173-175页

作者： David G. Slear Robert L. Long James D. Jones F. S. Giacobbe GPU Nuclear Parsippany N.J. 07054 In 1974 David Slear joined General Public Utilities Nuclear Corp. where his responsibilities included the design review of components for new nuclear power plants and troubleshooting component failures both in nuclear power and fossil plants in the GPU System. In 1978 he was promoted to Preliminary Engineering Manager and was responsible for coordinating the preparation of design criteria for several coal-fired plants and combustion turbines to be installed throughout the 1980s. Immediately following the TMI-2 accident he was placed in charge of coordinating the establishment of criteria and the design for numerous modifications that were perceived to be required in order to maintain core cooling and a stable safe shutdown condition for the TMI-2 reactor. Subsequently he was promoted to Manager of TMI Engineering Projects which involved establishing the criteria and coordinating the engineering for the numerous modifications required to TMI-1 as a result of the Lessons Learned from the accident at TMI-2. He holds a B.S. Degree in Mechanical Engineering and an M.S. Degree in Mechanical Engineering. Since April 1982 Robert L. Long has been Vice President and Director of the Nuclear Assurance Division of the GPU Nuclear Corp. This includes responsibilities for the Quality Assurance Department the Nuclear Safety Assessment Department the Training & Education Directorate and the Emergency Preparedness Department. Joining GPU in 1978 he has been actively involved with Three Mile Island recovery and restart activities since the spring of 1979. From February 1980 through March 1982 he served as Director–Training & Education for GPU Nuclear. He holds the B.S. degree in Electrical Engineering from Bucknell University and the M.S.E. and Ph.D. degrees in Nuclear Engineering from Purdue University. He has written numerous publications and has presented lectures on “energy and the environment” issues all over the United States and in Southeast Asia. Since joining GPU Nuclear Corpo

来源：评论

学校读者我要写书评

暂无评论

RUDDER ROLL STABILIZATION FOR COAST GUARD CUTTERS AND FRIGATES

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 267-282页

作者： BAITIS, E WOOLAVER, DA BECK, TA Dr. Erich Baitis: a native of Germany came to the David W. Taylor Naval Ship Research and Development Center in 1957 as a co-operative student/trainee and received his Bachelor of Science Degree in Physics from Virginia Polytechnic Institute. As a 32-year-old naval architect in 1971 he received both the VietnamHonorServiceMedaland the Navy'sMeritoriousCivilianServiceAwardfor his eight months as liaison with the Vietnamese NAVVS ferro-cement ship program. As head of the Seakeeping and Stabilization Group of the Surface Ship Dynamics Branch his work has led to the development of a new standard Ship Motion Computer Program and the application of ship motions to ship habitability operability and survivability problems. A major area of this work has been the ship/aircraft interface which is particularly sensitive to ship motions wind and other environmental factors. Mr. Dennis A. Woolaver:has been employed as a Naval Architect at the David W. Taylor Naval Ship Research and Development Center since 1965 where his work has resulted in numerous patents. He received his Bachelor of Science Degree in Electrical Engineering from George Washington University where he also completed graduate work in Communication Theory. Additional fields of study include Computer Science and Personnel Management. Current efforts are directed toward surface ship motion mitigation data acquisition and statistical analysis. He is a member of the Society of Naval Architects and Marine Engineers. Lt. Tom A. Beck USCG: joined the UnitedStatesCoastGuardin 1966 where he trained as an Electronics Technician. He received a Bachelor of Science Degree in Electrical Engineering from Columbia University in 1978. From 1978 to 1979 he was an Electronics Project Officer at the CoastGuardElectronics Laboratory in Alexandria Virginia. Since 1980 he has been a Research and Development Project Officer in the Sensor Technology Branch of the CoastGuardsOffice of Research and Development. Lt. Beck is a member of the Institute of Electronic and Elect

The potential use of rudders as anti-roll devices has long been recognized. However, the possible interference of this secondary function of the rudder with its primary role as the steering mechanism has prevented, for many years, the development of practical rudder roll stabilizers. The practical feasibility of rudder roll stabilization has, however, in recent years been demonstrated by two systems designed and developed for operational evaluation aboard two different U.S. C oast G uard Cutters, i.e., Jarvis and Mellon of the 3,000-ton, 378-foot HAMILTON Class. The authors describe the major components of the rudder roll stabilization (RRS) system, along with the design goals and methodology as applied to these first two prototypes. In addition, a brief history of the hardware development is provided in order to show some of the lessons learned. The near flawless performance of the prototypes over the past four years of operational use in the North Pacific is documented. Results from various sea trials and reports of the ship operators are cited and discussed. The paper concludes with a discussion of the costs and benefits of roll stabilization achieved using both a modern anti-roll fin system, as well as two different performance level RRS systems. The benefits of roll stabilization are demonstrated by the relative expansion in the operational envelopes of the USS OLIVER HAZARD PERRY (FFG-7) Class. The varying levels of roll stabilization suggest that the merits of fins and RRS systems are strongly dependent on mission requirements and the environment. The demonstrated performance of the reliable RRS system offers the naval ship acquisition manager a good economical stabilization system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

FOCAS - A NEW LOOK IN COMBAT SYSTEM SIGNAL TRANSMISSION

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 51-62页

作者： SLEMON, CS ABBOTT, JW Charles S. Slemon:graduated from Brown University with an Sc.B. Degree in Physics and did graduate work in semiconductors at the School of Electrical Engineering Cornell University sity receiving an M.S. degree. In 1972 he received an NSF grant to study the temperature dependence of crystal structures and while at Cornell he developed various fabrication and testing techniques with new semiconductor compounds. Upon joining Tetra Tech Inc. in 1976 he established and is responsible for their fiberoptic laboratory. He has carried out many programs involved in fiberoptic links for secure communication for various government agencies in which he authored numerous classified reports and developed special fiberoptic devices and system. He has also carried out studies and hardware development and evaluation programs for the military and commercial clients including marine and deep sea uses of fiberoptics for NOSC ONR and other off-shore industry contractors. For NAVSEA he authored several reports investigating the potential uses and advantages that fiberoptic technology offers to Navyshipboard operations. Mr. Slemon has published many articles and made numerous presentations in the field of fiberoptics. He has also taught several short courses on the subject and is the holder of several patents. Mr. Jack W. Abbott:received his BSME degree from Stanford University in 1960 and his Masters (MEA) degree from George Washington University in 1975. He holds a Professional Engineer License in the state of California. Mr. Abbott served as a naval officer – aboard a destroyer for 3 years. He worked for the Garrett Corporation for nearly 8 years involved with gas turbine design development and application. For the last 15 years Mr. Abbott has been directly involved with all aspects of destroyer design including the Canadian DDH 280 U.S. DD 963 and DD 993 destroyers. Currently Mr. Abbott is the NAVSEA Program Manager of the Ship Systems Engineering Standards (SSES) Program – responsible for developing combat system inter

This article introduces the concept of a truly Universal Signal Distribution Network. The emergence of fiberoptic technology as a viable signal transmission medium now gives the N avy the opportunity to use Fiber Optic Cabling and Switching (FOCAS) to implement a universal network. A FOCAS Network can handle all present or future shipboard signal distribution architectures such as point-to-point or data bus. Furthermore, compared to existing cable installations, this network offers lower cost through reduction of the number of cables, weight, and volume, freedom from interference and EMP effects, increased redundancy, and higher operational flexibility. In addition, it will easily satisfy all future expansion or changes in signal distribution by providing at least a ten fold increase in data rate capacity over existing electrical cabling. This last feature alone holds the potential for allowing upgrading and conversion of modern combat systems without need for adding new cabling in the ship. Along with the introduction of the concept of a Universal FOCAS network and its practical benefits and capabilities, this article presents a trade-off between the Radar Data Distribution Network on the FFG and an analogous FOCAS network. Though far from optimized, the resultant FOCAS network shows that the conversion of existing shipboard networks to FOCAS is straightforward and provides a reduction of at least 90% in cable volume and weight and lower cost in cable purchase and installation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：