检索结果-内蒙古大学图书馆

Dynamic Surrogate Optimization of Vertically Stacked Nanosheet FET Based on Gaussian Process Regression

IEEE Access 2025年 13卷 95730-95738页

作者： Christofer N. Yalung Doldet Tantraviwat Doctor of Philosophy Program in Nanoscience and Nanotechnology (International Program/Interdisciplinary) Materials Science Research Center Faculty of Science Chiang Mai University Chiang Mai Thailand Department of Electrical Engineering Faculty of Engineering Chiang Mai University Chiang Mai Thailand Center of Excellence in Materials Science and Technology Faculty of Science Chiang Mai University Chiang Mai Thailand

While speed improvements are pivotal for advancing modern transistor technologies and ensuring faster computational performance, the tradeoffs with other critical electrical properties, such as threshold voltage ( $V_{T}$ ) and off-current ( $I_{OFF}$ ), are often overlooked. These tradeoffs can significantly impact the overall device performance. The design of vertically stacked n-type and p-type nanosheet FETs (NSFETs) was applied using a dynamic surrogate optimization-gaussian process regression (DSO-GPR) with batch assessment and halting conditions. A vertically stacked silicon-based system is created and refined. Source extension ( $S_{ext}$ ), drain extension ( $D_{ex\mathrm {t}}$ ), gate length ( $L_{g}$ ), nanosheet height (NSh), nanosheet width (NSw), and number of fin (nfin) make up the input variables. In addition to applying normalization to make the weight assignment to the goal functions easier, a penalty component was incorporated to manage the $V_{T}$ . This study demonstrates the effectiveness of the DSO-GPR framework in optimizing NSFET-based inverter designs by balancing speed, $I_{OFF}$ and $V_{T}$ . Among the three evaluated cases, case 1 achieved the fastest propagation delay (1.05 ps) due to higher $I_{ON}$ and lower $V_{T}$ , albeit with increased $I_{OFF}$ and $V_{T}$ mismatch. Case 2 provided a balanced trade-off, significantly reducing $I_{OFF}$ while maintaining a competitive delay of 1.25 ps and achieving $V_{T}$ matching at 0.11 V for both n-type and p-type NSFETs. The optimum parameters for n-type are ${L} _{g}$ = 5 nm, $N_{Sh} = 9$ nm, $N_{Sw} = 42$ nm, $S_{ext} = 3$ nm and $D_{ext} = 4$ nm, nfin = 5; for p-type, $L_{g} = 7$ nm, $N_{Sh} = 10$ nm, $N_{Sw} = 42$ nm, $S_{ext} = 3$ nm and $D_{ext} = 3$ nm, nfin = 5. Case 3 minimized leakage at the cost of delay, highlighting the trade-off between power and performance. These results validate the framework’s adaptability and automation, with performance-based stopping criteria that balance

关键词： Optimization Logic gates Ions Silicon Performance evaluation Linear programming Gaussian processes Field effect transistors Accuracy Machine learning

来源：评论

学校读者我要写书评

暂无评论

A Low Complexity ML-Based Methods for Malware Classification

引用

Computers, Materials & Continua 2024年第9期80卷 4833-4857页

作者： Mahmoud E.Farfoura Ahmad Alkhatib Deema Mohammed Alsekait Mohammad Alshinwan Sahar A.El-Rahman Didi Rosiyadi Diaa Salama Abd Elminaam Cybersecurity Department Al-Zaytoonah University of JordanAmman11733Jordan Department of Computer Science and Information Technology Applied CollegePrincess Nourah Bint Abdulrahman UniversityP.O.Box 84428Riyadh11671Saudi Arabia Faculty of Information Technology Applied Science Private UniversityAmman11931Jordan Computer Systems Program-Electrical Engineering Department Faculty of Engineering-ShoubraBenha UniversityCairo11629Egypt Research Center for Artificial Intelligence and Cybersecurity Electronics and Informatics OrganizationNational Research and Innovation Agency(BRIN)KST Samaun SamadikunBandung40135Republic of Indonesia Jadara Research Center Jadara UniversityIrbid21110Jordan MEU Research Unit Middle East UniversityAmman11831Jordan

The article describes a new method for malware classification,based on a Machine Learning(ML)model architecture specifically designed for malware detection,enabling real-time and accurate malware *** an innovative feature dimensionality reduction technique called the Interpolation-based Feature Dimensionality Reduction Technique(IFDRT),the authors have significantly reduced the feature space while retaining critical information necessary for malware *** technique optimizes the model’s performance and reduces computational *** proposed method is demonstrated by applying it to the BODMAS malware dataset,which contains 57,293 malware samples and 77,142 benign samples,each with a 2381-feature *** the IFDRT method,the dataset is transformed,reducing the number of features while maintaining essential data for accurate *** evaluation results show outstanding performance,with an F1 score of 0.984 and a high accuracy of 98.5%using only two reduced *** demonstrates the method’s ability to classify malware samples accurately while minimizing processing *** method allows for improving computational efficiency by reducing the feature space,which decreases the memory and time requirements for training and *** new method’s effectiveness is confirmed by the calculations,which indicate significant improvements in malware classification accuracy and *** research results enhance existing malware detection techniques and can be applied in various cybersecurity applications,including real-timemalware detection on resource-constrained *** and scientific contribution lie in the development of the IFDRT method,which provides a robust and efficient solution for feature reduction in ML-based malware classification,paving the way for more effective and scalable cybersecurity measures.

关键词： Malware detection ML-based models dimensionality reduction feature engineering

来源：评论

学校读者我要写书评

暂无评论

Effect of Wire Size and Slot Filling Factor on the Number of Turns Per Pole in Design of SRM

Effect of Wire Size and Slot Filling Factor on the Number of...

引用

Global Energy Conference (GEC)

作者： Bekir Geçer Öztürk Tosun N. Füsun Oyman Serteller Alper Nabi Akpolat Gülten Kaşoğlu Mechatronics Program Atasehir Adiguzel Vocational School Istanbul Turkey Electrical-Electronic Engineering Marmara University Istanbul Turkey Electrical-Electronics Engineering Faculty of Technology Marmara University Istanbul Turkey Appied Mathematics Faculty of Sciences Marmara University Istanbul Turkey

ISBN: (数字)9798331532611

ISBN: (纸本)9798331532628

As electric vehicles become increasingly important and widely used, the design of every type of electric motor has gained significant attention in both literature and industry. This study provides a detailed analysis of the number of turns in the motor windings, a critical factor in electric motor design. Through comparative analysis, it investigates how wire size and slot filling factor affect the number of windings turns per pole in Switched Reluctance Motors (SRMs). In addition, the study evaluates the effect of the number of turns analysis on motor performance during design optimization using the genetic algorithm tool in Ansys and traditional calculation methods. The optimization was performed with the wire size range between 0.45 and 0.85 mm. As a result, the optimal value with 82% efficiency was obtained with a wire size of 0.81 mm and 312 turns. The lower copper losses, ideal volume, reduced costs, and enhanced efficiency are obtained by determining the optimal number of turns. This research contributes to developing more efficient and cost-effective electric motor designs. Future research could explore various and more effective optimization techniques and current parameters to design SRM and other motors.

关键词： Power system measurements Fill factor (solar cell) Density measurement Windings Switched reluctance motors Electric vehicles Filling Wire Optimization Electric motors

来源：评论

学校读者我要写书评

暂无评论

Soybean Price Prediction by Using Lstm Models Based on Brazilian Climatic Data

SSRN

引用

SSRN 2024年

作者： Oliva, Jefferson Tales Martelli, Otávio Pigozzo de Castro Barbosa, Marco Antônio Molin, Viviane Dal Casanova, Dalcimar Teixeira, Marcelo Graduate Program in Electrical Engineering Federal University of Technology-Paraná PR Pato Branco85503-390 Brazil Department of Academic Informatics Federal University of Technology-Paraná PR Pato Branco85503-390 Brazil Graduate Program in Production and Systems Engineering Federal University of Technology-Paraná PR Pato Branco85503-390 Brazil

This work uses machine learning to verify whether the Brazilian climate influences international soybean price prediction. For this, climatic data, dollar quotes, inflation, and annual soybean production were collected from different data sources. Then, the collected data were pre-processed and grouped by Brazilian state. Afterward, data from the five most productive Brazilian states are chosen, such as Mato Grosso (MT), Mato Grosso do Sul (MS), Goiás (GO), Paraná (PR), and Rio Grande do Sul (RS). Afterward, predictive models are built using the long short-term memory (LSTM) method, which is applied in each chosen state dataset considering two different settings: with and without climatic data. Thus, two models were built for each Brazilian state, totaling ten predictors. In the experimental evaluation, when trained with climatic data, the PR model achieved the lowest values of root mean squared error (RMSE) and mean absolute error (MAE). Regarding predictors trained without climate data, the RS and PR obtained the lowest values of RMSE and MAE, respectively. After conducting statistical hypothesis tests, no significant difference was found among models, stating, with 95% certainty, that, in this study, the Brazilian climatic data did not influence the model performance for predicting soybean prices. On the other hand, one of the main contributions of work is conducting an unprecedented study about soybean price prediction using Brazilian climatic data. © 2024, The Authors. All rights reserved.

关键词： Long short-term memory

来源：评论

学校读者我要写书评

暂无评论

Enhancement of Antenna Gain With M&W Slot Model on EBG Reflector Structure Utilizing Reflection Phase Diagram Analysis

Enhancement of Antenna Gain With M&W Slot Model on EBG Refle...

引用

International electrical engineering Congress (iEECON)

作者： Payu Chakunna Nopphadon Phusam Pisit Mahatthanajatuphat Wilaiporn Lee Thanakarn Suangun School of Engineering University of Phayao Phayao Thailand Regular Program in Mathematics-Science Yothinburana School Bangkok Thailand Department of Electrical and Computer Engineering King Mongkut's University of Technology North Bangkok Bangkok Thailand

ISBN: (数字)9798331543952

ISBN: (纸本)9798331543969

This research demonstrates the improvement in antenna gain by utilizing an EBG reflector. The EBG reflector includes a unit cell with grooves shaped like the letters M and W to mitigate surface waves at a frequency of 2.45 GHz. The suggested EBG reflector is constructed on an FR-4 substrate exhibiting a uniform dielectric constant of 4.3, a loss tangent of 0.025, and a thickness of 1.6 mm. Furthermore, the impact of boosting the antenna gain can be analyzed by the reflection phase diagram, which exhibits values ranging from +90° to -90° at the resonant frequency of the reflector. The proposed EBG reflector comprises 5x5 unit cells. The testing results of the reflector's performance, when integrated with a general dipole antenna, indicate that it can effectively respond to the resonant frequency of 2.45 GHz, with a |S 11 | level below -10 dB within the frequency range of 2.2 GHz to 2.6 GHz, thereby adequately covering the IEEE 802.11 b/g/n band. The suggested EBG reflector exhibits a gain of around 6.5 dBi at 2.45 GHz, indicating its efficacy in enhancing gain relative to the standard PEC reflector. Moreover, the radiation pattern is also directional.

关键词： Slot antennas Dipole antennas Resonant frequency Reflector antennas Metamaterials Reflection Gain Standards Periodic structures Antenna radiation patterns

来源：评论

学校读者我要写书评

暂无评论

Enhancement of Antenna Gain With M&W Slot Model on EBG Reflector Structure Utilizing Reflection Phase Diagram Analysis

Enhancement of Antenna Gain With M&W Slot Model on EBG Refle...

引用

13th International electrical engineering Congress, iEECON 2025

作者： Chakunna, Payu Phusam, Nopphadon Mahatthanajatuphat, Pisit Lee, Wilaiporn Suangun, Thanakarn University of Phayao School of Engineering Phayao Thailand Yothinburana School Regular Program in Mathematics-Science Bangkok Thailand King Mongkut's University of Technology North Bangkok Department of Electrical and Computer Engineering Bangkok Thailand

ISBN: (纸本)9798331543952

This research demonstrates the improvement in antenna gain by utilizing an EBG reflector. The EBG reflector includes a unit cell with grooves shaped like the letters M and W to mitigate surface waves at a frequency of 2.45 GHz. The suggested EBG reflector is constructed on an FR-4 substrate exhibiting a uniform dielectric constant of 4.3, a loss tangent of 0.025, and a thickness of 1.6 mm. Furthermore, the impact of boosting the antenna gain can be analyzed by the reflection phase diagram, which exhibits values ranging from +90° to -90° at the resonant frequency of the reflector. The proposed EBG reflector comprises 5x5 unit cells. The testing results of the reflector's performance, when integrated with a general dipole antenna, indicate that it can effectively respond to the resonant frequency of 2.45 GHz, with a |S11| level below -10 dB within the frequency range of 2.2 GHz to 2.6 GHz, thereby adequately covering the IEEE 802.11 b/g/n band. The suggested EBG reflector exhibits a gain of around 6.5 dBi at 2.45 GHz, indicating its efficacy in enhancing gain relative to the standard PEC reflector. Moreover, the radiation pattern is also directional. © 2025 IEEE.

关键词： Antenna reflectors

来源：评论

学校读者我要写书评

暂无评论

Deep Learning-Based Automated Segmentation of Fiber Breaks in Advanced Composites 38

Deep Learning-Based Automated Segmentation of Fiber Breaks i...

引用

38th Technical Conference of the American Society for Composites, ASC 2023

作者： Jain, Sudhir Li, Carina Xiaochen Vuong, Daniel McGllick, Matthew Saifaee, Saeed Furtado, Carolina Kopp, Reed Joseph, Joshua Adjodah, Dhaval Rosini, Sebastian Sinclair, Ian Spearing, S. Mark Wardle, Brian L. Integrated Design and Management Program Massachusetts Institute of Technology CambridgeMA02139 United States Department of Aeronautics and Astronautics Massachusetts Institute of Technology CambridgeMA02139 United States Department of Electrical Engineering and Computer Science Massachusetts Institute of Technology CambridgeMA02139 United States MIT Media Lab Massachusetts Institute of Technology CambridgeMA02139 United States Department of Mechanical Engineering University of Southampton SouthamptonSO17 1BJ United Kingdom Departments of Aeronautics and Astronautics and Mechanical Engineering Massachusetts Institute of Technology CambridgeMA02139 United States

ISBN: (纸本)9781605956916

The heterogeneity of the microstructure and the anisotropy of the mechanical properties of carbon fiber reinforced polymer composites (CFRP) are associated with complex damage mechanisms that make failure prediction highly challenging. Typical damage mechanisms for CFRP include: (i) interlaminar cracking (delamination), (ii) matrix cracking, and (iii) fiber breakage. X-ray computed tomography (CT) has been utilized recently to identify the complex damage in progressive failure of CFRP in 3D and 4D (3D spatial and 1D temporal). However, these scans contain a large amount of data (≈10 GB/mm3), which makes it challenging to extract mechanistic insights in a reasonable time frame. In previous work, we presented the first deep learning (DL) convolutional neural network (CNN) segmentation of multiclass microscale matrix damage in CFRP. The trained CNN segments complex and sparse composite matrix damage mechanism to ≈ 99.99% agreement, with nearly 100% of human time eliminated, providing higher accuracy compared to human segmentation. In this work, we developed CNN-based method for the automated segmentation of fiber breaks using synchrotron radiation-based CT (SRCT) scans that have been human-labeled. The model employed a U-Net full CNN as the high-level encoder (feature extraction)-decoder (feature localization) structure, and VGG16 as the deep CNN backbone via the publicly available Segmentation Models GitHub repository. An unbiased evaluation was performed comparing the machine vs. the human-labeled ground truth. Finally, active learning was presented for the machine-assisted relabeling of datasets containing fiber breaks. The deep learning-based automated segmentation method demonstrated accurate identification (> 90%) of fiber breakage for CFRP. © 2023 by DEStech Publications, Inc. and American Society for Composites. All rights reserved.

关键词： Complex networks

来源：评论

学校读者我要写书评

暂无评论

Optimizing The Performance Of Photovoltaic Systems Under Non-uniform Irradiance Using ANN-MPPT Algorithm

Optimizing The Performance Of Photovoltaic Systems Under Non...

引用

IEEE Conference on Power Electronics and Renewable Energy (CPERE)

作者： Mohamed A. Khafagy Sameh O. Abdellatif Rania A. Swief Hani A. Ghali MSc. Student in Renewable Energy Program Electrical Engineering Department Faculty of Engineering The British University of Egypt (BUE) Cairo Egypt Electrical Engineering Department Faculty of Engineering and FabLab in the centerfor Emerging Learning Technology(CELT) Faculty of Engineering and FabLab in the center for Emerging Learning Technology(CELT) Cairo Egypt Electrical Power and Machines Engineering Faculty of Engineering Ain Sham University Cairo Egypt

Photovoltaic (PV) systems are usually designed based on the standard operating condition in a specific location. However, harsh environmental conditions impact the PV array during regular operation. One of these harsh conditions can be the non-uniform irradiance spatially or temporally. Herein, the maximum power point tracking (MPPT) systems are essential in maintaining the operation under the maximum possible conditions. Artificial neural network (ANN) techniques have attracted researchers’ attention as an up-to-date artificial alternative in MPPT algorithms. We demonstrated two PV systems, on-grid and off-grid, with a power capacity of 5 kW. The proposed ANN model showed enhanced performance concerning conventional ones with a minimum response time of 0.0075 se

关键词： Photovoltaic systems Maximum power point trackers Renewable energy sources Artificial neural networks Power electronics Time factors Standards

来源：评论

学校读者我要写书评

暂无评论

Digital Forensics Investigation and Incident Response in Internet of Things (IoT-DFIR): Challenges and Models 9

Digital Forensics Investigation and Incident Response in Int...

引用

9th International Conference on Wireless and Telematics, ICWT 2023

作者： Ahdan, Syaiful Zaki Hamidi, Eki Ahmad Riskiono, Sampurna Dadi Negara, Ridha Muldina Mayasari, Ratna Ramadona, Suci Nurhayati, Ade Sucipto, Adi Jupriyadi Nurkahfi, Galih Nugraha Farahiyah, Dzata Naseer, Muchammad Universitas Teknokrat Indonesia Faculty of Engineering & Computer Science Lampung35132 Indonesia Uin Sunan Gunung Djati Bandung Electrical Engineering Department Bandung40614 Indonesia School of Electrical Engineering Telkom University Bandung40257 Indonesia Elearical Engineering Study Program Politeknik Caltex Riau Riau28265 Indonesia Institut Teknologi Telkom Jakarta Faculty of Engineering Jakarta11710 Indonesia Bandung40135 Indonesia Universitas Islam Indonesia Yogyakarta Faculty of Industrial Technology Yogyakarta55584 Indonesia Sekolah Tinggi Teknologi Bandung Informatics Department Bandung40235 Indonesia

ISBN: (纸本)9798350305029

Many different industries are currently making substantial use of the Internet of Things (IoT). IoT is the process through which electronic devices communicate with their surrounding virtual environment by continuously exchanging data via sensors. Due to increased IoT security concerns, digital forensic investigators now possess greater knowledge and abilities to investigate IoT devices. IoT-DigFor are required in terms of cybercrime due to the rapid growth in the number of electronic devices and the collection and consumption of enormous amounts of data. IoT systems with billions of devices have produced a significant amount of evidence, which presents a significant challenge to digital investigators and practitioners who must connect with IoT devices to conduct fast and thorough investigations into cybercrimes. This article presents detailed information about forensics in the IoT environment. The IoT forensic paradigm and the challenges that design-based security requirements and IoT system security offer for IoT-DigFor are covered in great detail at the beginning of the article. © 2023 IEEE.

关键词： Internet of things

来源：评论

学校读者我要写书评

暂无评论

Fully rubbery synaptic transistors made out of all-organic materials for elastic neurological electronic skin

引用

Nano Research 2022年第2期15卷 758-764页

作者： Hyunseok Shim Seonmin Jang Jae Gyu Jang Zhoulyu Rao Jong-ln Hong Kyoseung Sim Cunjiang Yu Materials Science and Engineering Program University of HoustonHoustonTX 77204 USA Department of Chemistry Seoul National UniversitySeoul 08826Republic of Korea Department of Chemistry Ulsan National Institute of Science and Technology(UNIST)Ulsan 44919Republic of Korea Department of Mechanical Engineering University of HoustonHoustonTX 77204 USA Department of Biomedical Engineering University of HoustonHoustonTX 77204USA Department of Electrical and Computer Engineering University of HoustonHoustonTX 77204 USA Texas Center for Superconductivity University of HoustonHoustonTX 77204USA

Neurologic function implemented soft organic electronic skin holds promise for wide range of applications,such as skin prosthetics,neurorobot,bioelectronics,human-robotic interaction(HRI),***,we report the development of a fully rubbery synaptic transistor which consists of all-organic materials,which shows unique synaptic characteristics existing in biological *** synaptic characteristics retained even under mechanical stretch by 30%.We further developed a neurological electronic skin in a fully rubbery format based on two mechanoreceptors(for synaptic potentiation or depression)of pressure-sensitive rubber and an all-organic synaptic *** converting tactile signals into Morse Code,potentiation and depression of excitatory postsynaptic current(EPSC)signals allow the neurological electronic skin on a human forearm to communicate with a robotic *** collective studies on the materials,devices,and their characteristics revealed the fundamental aspects and applicability of the all-organic synaptic transistor and the neurological electronic skin.

关键词： synaptic transistor stretchable electronic skin all-organic

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：