检索结果-内蒙古大学图书馆

Simulation of electromagnetic radiation and scattering using a finite difference-time domain technique

computer Applications in engineering Education 1992年第1期1卷 45-45页

作者： Li, K. Tassoudji, M.A. Shin, R.T. Kong, J.A. Department of Electrical Engineering and Computer Science and Research Laboratory of Electronics Massachusetts Institute of Technology Cambridge Massachusetts 02139 Kevin Li:received his BS and SM degrees (1990) in Electrical Engineering and EE (Electrical Engineer's) degree (1991) from the Massachusetts Institute of Technology where he is currently pursuing his PhD in Electrical Engineering. Since 1990 he has been the recipient of a United States Air Force Laboratory Graduate Fellowship. His main research interests include electromagnetic scattering radar cross section prediction and numerical techniques. Mr. Li is a member of Tau Beta Pi and a student member of IEEE. M. Ali Tassoudji:received his BS (1987) and MS (1989) degrees in Electrical Engineering from the University of Michigan Ann Arbor. Since 1989 he has been a research assistant at the Massachusetts Institute of Technology where he is currently working towards his PhD in Electrical Engineering. His research interests include electromagnetic scattering and propagation modeling of microwave circuits and numerical techniques. Mr. Tassoudji is a member of IEEE and Eta Kappa Nu. Robert T. Shin:received his SB (1977) SM (1980) and PhD (1984) in Electrical Engineering from the Massachusetts Institute of Technology. Since 1984 he has been a member of the Air Defense Techniques Group at MIT Lincoln Laboratory as a Research Staff member and as a Senior Staff member from 1989. His research interests are in the areas of electromagnetic wave scattering and propagation theoretical model development and data interpretation for microwave remote sensing. He is the coauthor ofTheory of Microwave Remote Sensing(Wiley 1985). Dr. Shin is a member of The Electromagnetics Academy IEEE American Geophysical Union Tau Beta Pi Eta Kappa Nu and Commission F of the International Union of Radio Science. Since 1987 he has served on the Editorial Board of theJournal of Electromagnetic Waves and Applications(JEWA). Jin Au Kong:is Professor of Electrical Enginee

The finite difference-time domain (FD-TD) technique is applied to the solution of Maxwell's equations. A computer program, which can be used to simulate and study numerous electromagnetic phenomena, is developed and implemented on an IBM 386 compatible personal computer. The FD-TD technique is a useful tool for students in electromagnetics. The technique is flexible and can be applied to many basic EM scattering and radiation problems. Because field solutions are found as a function of time, visualization of the propagation of the EM fields is possible. The FD-TD technique is implemented for a two-dimensional rectangular grid in conjunction with a second-order absorbing boundary condition. Both E- and H-field polarizations are analyzed. Finite objects consisting of dielectric, magnetic and conducting materials, and perfectly conducting infinite ground planes are modeled. Plane wave and line current sources are implemented. In addition to the capability of animating the propagation of the EM fields, radiation and scattering patterns can be generated.

关键词：

来源：评论

学校读者我要写书评

暂无评论

FIELD SAMPLING OF RESIDUAL AVIATION GASOLINE IN SANDY SOIL

引用

GROUND WATER MONITORING AND REMEDIATION 1991年第2期11卷 107-120页

作者： OSTENDORF, DW LEACH, LE HINLEIN, ES XIE, YF 1 David W. Ostendorf is an associate professor in the Environmental Engineering Program of the Civil Engineering Department at the University of Massachusetts (Civil Engineering Department University of Massachusetts Amherst MA 01003). His research interests include unconfined aquifer contamination hazardous waste site remediation and analytical modeling of problems in environmental fluid mechanics. Dr. Ostendorf is a registered professional engineer in Massachusetts and a member of the American Geophysical Union American Society of Civil Engineers Soil Science Society of America Water Pollution Control Federation and Association of Environmental Engineering Professors as well as the National Water Well Association.2 Lowell E. Leach is an environmental engineer with the Robert S. Kerr Environmental Research Laboratory of the U.S. Environmental Protection Agency (RS Kerr Environmental Research Laboratory U.S. EPA P.O. Box 1198 Ada OK74820). Leach received his B.S. ingeological engineering at the University of Oklahoma in 1959 and has been a registered professional engineer in Oklahoma since 1966. With 29 years of experience in field applications of geological engineering he is responsible for developing methodology for sampling ground water and subsurface materials for the Robert S. Kerr Environmental Research Laboratory.3 Erich S. Hinlein is a research assistant in the Environmental Engineering Program of the Civil Engineering Department at the University of Massachusetts (Civil Engineering Department University of Massachusetts Amherst MA 01003). His research interests include ground water pollution hazardous waste site investigation and transport processes in unconfined aquifers. Hinlein graduated with a B.S. in electrical and computer engineering from the University of Massachusetts at Amherst in May 1985 and entered the Environmental Engineering Master's Degree Program in January 1989.4 Yuefeng Xie is a postdoctoral research associate in the Environmental Engineering Program of the Civil E

Two complementary field sampling methods for the determination of residual aviation gasoline content in the contaminated capillary fringe of a fine, uniform, sandy soil were investigated. The first method featured field extrusion of core barrels into pint-size Mason jars, while the second consisted of laboratory partitioning of intact stainless steel core sleeves. The barrel extrusion procedure involved jar headspace sampling in a nitrogen-filled glove box, which delineated the 0.7m thick residually contaminated interval for subsequent core sleeve withdrawal from adjacent boreholes. Soil samples removed from the Mason jars (in the field) and sleeve segments (in the laboratory) were subjected to methylene chloride extraction and gas chromatographic analysis to compare their aviation gasoline content. The barrel extrusion sampling method yielded a vertical profile with 0.10m resolution over an essentially continuous 5.0m interval from the ground surface to the water table. The sleeve segment alternative yielded a more resolved 0.03m vertical profile over a shorter 0.8m interval through the capillary fringe. The two methods delivered precise estimates of the vertically integrated mass of aviation gasoline at a given horizontal location, and a consistent view of the vertical profile as well. In the latter regard, a 0.2m thick lens of maximum contamination was found in the center of the capillary fringe, where moisture filled all voids smaller than the mean pore size. The maximum peak was resolved by the core sleeve data, but was partially obscured by the barrel extrusion observations, so that replicate barrels or a half-pint Mason jar size should be considered for data supporting vertical transport analyses in the absence of sleeve partitions.

关键词：

来源：评论

学校读者我要写书评

暂无评论

FULL-WAVE SOLUTION OF DIELECTRIC LOADED WAVE-GUIDES AND SHIELDED MICROSTRIPS UTILIZING FINITE-DIFFERENCE AND THE CONJUGATE-GRADIENT METHOD

引用

international JOURNAL OF MICROWAVE AND MILLIMETER-WAVE computer-AIDED engineering 1991年第4期1卷 346-357页

作者： NARAYANAN, V MANELA, M LADE, RK SARKAR, TK Department of Electrical and Computer Engineering Syracuse University Syracuse New York 13244-1240 Viswanathan Narayanan was born in Bangalore India on December 14 1965. He received the BE degree in Electronics and Communications from B.M.S. College of Engineering Bangalore in 1988. He joined the Department of Electrical Engineering at Syracuse University for his graduate studies in 1989 where he is currently a research assistant. His research interests are in microwave measurements numerical electromagnetics and signal processing. Biographies and photos are not available for M. Manela and R. K. Lade. Tapan K. Sarkar (Sf69-M'76-SM'X1) was born in Calcutta. India on August 2 1948. He received the BTech degree from the Indian Institute of Technology Kharagpur India in 1969 the MScE degree from the University of New Brunswick Fredericton Canada in 1971. and the MS and PhD degrees from Syracuse University. Syracuse NY in 1975. From 1975-1976 he was with the TACO Division of the General Instruments Corporation. He was with the Rochester Institute of Technology (Rochester NY) from 1976-1985. He was a Research Fellow at the Gordon Mckay Laboratory Harvard University Cambridge MA from 1977 to 1978. He is now a Professor in the Department of Electrical and Computer Engineering Syracuse University. His current research interests deal with numerical solutions of operator equations arising in electromagnetics and signal processing with application to system design. He obtained one of the “ best solution” awards in May 1977 at the Rome Air Development Center (RADC) Spectral Estimation Workshop. He has authored or coauthored more than 154 journal articles and conference papers and has written chapters in eight books. Dr. Sarkar is a registered professional engineer in the state of New York. He received the Best Paper Award of the IEEE Transactions on Electromagnetic Compatibility in 1979. He was an Associate Editor for feature articles of the lEEE Antennas arid Propagation Sociefy Newsletter and was

Dynamic analysis of waveguide structures containing dielectric and metal strips is presented. The analysis utilizes a finite difference frequency domain procedure to reduce the problem to a symmetric matrix eigenvalue problem. Since the matrix is also sparse, the eigenvalue problem can be solved quickly and efficiently using the conjugate gradient method resulting in considerable savings in computer storage and time. Comparison is made with the analytical solution for the loaded dielectric waveguide case. For the microstrip case, we get both waveguide modes and quasi-TEM modes. The quasi-TEM modes in the limit of zero frequency are checked with the static analysis which also uses finite difference. Some of the quasi-TEM modes are spurious. This article describes their origin and discusses how to eliminate them. Numerical results are presented to illustrate the principles.

关键词： Waveguides

来源：评论

学校读者我要写书评

暂无评论

AUTOMATION OF PROPELLER INSPECTION AND FINISHING

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 124-131页

作者： STERN, H METZGER, R Howard K. Stern:is presently vice president of Robotic Vision Systems Inc. He received a bachelor of electrical engineering degree from College of the City of New York in 1960. Mr. Stern joined Dynell Electronics Corporation in 1971 and became part of the Robotic Vision Systems Inc. staff at the time of its spin-off from Dynell. He was program manager of the various three-dimensional sensing and replication systems constructed by Dynell and Robotic Vision Systems. As program manager his responsibilities encompassed technical administrative and operational areas. The first two portrait sculpture studio systems and the first three replication systems built by Robotic Vision Systems Inc. were designed manufactured and operated under his direction. Before joining Dynell Mr. Stern was a senior engineer at Instrument Systems Corporation and chief engineer of the Special Products Division of General Instrument Corporation. Prior to these positions Mr. Stern was chief engineer of Edo Commercial Corporation. At General Instrument and Edo Commercial he was responsible for the design and manufacture of military and commercial avionics equipment. Mr. Stern is presently responsible for directing the systems design and development for all of the company's programs. Robert J. Metzger:is currently engineering group leader at Robotic Vision Systems Inc. He graduated summa cum laude from the Cooper Union in 1972 with a bachelor of electrical engineering degree. Under sponsorship of a National Science Foundation graduate fellowship he graduated from the Massachusetts Institute of Technology in 1974 with the degrees of electrical engineer and master of science (electrical engineering). In 1979 Mr. Metzger graduated from Polytechnic Institute of New York with the degree of master of science (computer science). Since 1974 Mr. Metzger has been actively engaged in the design of systems and software for noncontact threedimensional optical measurement for both military and commercial applications. Of particular note are his c

Ship's propellers are currently measured by manual procedures using pitchometers, templates and gauges. This measurement process is extremely tedious, labor intensive and time consuming. In an effort to provide increased accuracy, repeatability and cost effectiveness in propeller manufacture, an automated propeller optical measurement system (APOMS) has been built which rapidly and automatically scans an entire ship's propeller using a 3-D vision sensor. This equipment is integrated with a propeller robotic automated templating system (PRATS) and the propeller optical finishing system (PROFS) which robotically template and grind the propeller to its final shape, using the APOMS-derived data for control feedback. The optical scanning and the final shape are both controlled by CAD/CAM data files describing the desired propeller shape. An automated propeller balancing system is incorporated into the PROFS equipment. The APOMS/PRATS/PROFS equipment is expected to provide lower propeller manufacturing costs.

关键词： PROPELLERS

来源：评论

学校读者我要写书评

暂无评论

AIR-CUSHION LANDING CRAFT NAVIGATION

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

A computer-MODEL FOR SHIPBOARD ENERGY ANALYSIS

引用

NAVAL ENGINEERS JOURNAL 1984年第5期96卷 33-45页

作者： DETOLLA, JP FLEMING, JR Joseph DeTolla:is a ship systems engineer in the Ship Systems Engineering Division SEA 56D5 at the Naval Sea Systems Command. His career with the Navy started in 1965 at the Philadelphia Naval Shipyard Design Division. In 1971 he transferred to the Naval Ship Engineering Center. He has held positions as a fluid systems design engineer and auxiliary systems design integration engineer. Mr. DeTolla has worked extensively in the synthesis and analysis of total energy systems notably the design development of the FFG-7 class waste heat recovery system. He is NA VSEA's machinery group computer supported design project coordinator and is managing the development of a machinery systems data base load forecasting algorithms and design analysis computer programs. Mr. DeTolla has a bachelor of science degree in mechanical engineering from Drexel University and a master of engineering administration degree from George Washington University. He is a registered professional engineer in the District of Columbia and has written several technical papers on waste heat recovery and energy conservation. Jeffrey Fleming:is a senior project engineer in the Energy R&D Office at the David Taylor Naval Ship R&D Center. In his current position as group leader for the future fleet energy conservation portion of the Navy's energy R&D program he is responsible for the identification and development of advanced components and subsystems which will lead to reductions in the fossil fuel consumption of future ships. Over the past several years he has also directed the development and application of total energy computer analysis techniques for the assessment of conventional and advanced shipboard machinery concepts. Mr. Fleming is a 1971 graduate electrical engineer of Virginia Polytechnic Institute and received his MS in electrical engineering from Johns Hopkins University in 1975. Mr. Fleming has authored various technical publications and was the recipient of the Severn Technical Society's “Best Technical Paper of the Year” award in 1

In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and Development Center (DTNSRDC) to analyze the performance of shipboard energy systems for applications other than nuclear or oil-fired steam propulsion plants. This paper discusses the applications and utility of this computer program as a performance analysis tool for design of ship machinery systems. The program is a simulation model that performs a complete thermodynamic analysis of a user-specified energy system. It offers considerable flexibility in analyzing a variety of propulsion, electrical, and auxiliary plant configurations through a component building block structure. Component subroutines that model the performance of shipboard equipment such as engines, boilers, generators, and compressors are available from the program library. Component subroutines are selected and linked in the program to model the desired machinery plant functional configurations. The operation of the defined shipboard energy system may then be simulated over a user-specified scenario of temperature, time, and load profiles. The program output furnishes information on component operating characteristics and fuel demands, which allows evaluation of the total system performance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

AN ADVANCED METHODOLOGY FOR PRELIMINARY HULL FORM DEVELOPMENT

引用

NAVAL ENGINEERS JOURNAL 1984年第4期96卷 147-161页

作者： LIN, WC DAY, WG HOUGH, JJ KEANE, RG WALDEN, DA KOH, IY Wen-Chin Lin:heads the Ship Powering Division at the David Taylor Naval Ship R&D Center (DTNSRDC). Dr. Lin received his B.S. degree in mechanical engineering from the National Taiwan University in 1957. He was awarded his M.S. degree in naval architecture and Ph.D. in engineering science from the University of California at Berkeley in 1963 and 1966 respectively. From 1966 to 1969 he was employed by ESSO Research and Engineering Company to conduct marine hydrodynamic research for oil tankers and offshore structures. Since joining DTNSRDC in 1969 he has actively conducted and directed hydrodynamic research to advance naval ship design technology and improve ship performance. Active in national and international symposia on ship hydrodynamic research he is recognized for contributions to the ship research community. For the past six years he has been a member of the Performance Committee of the ITTC and currently serves as secretary of the committee. He is a member of SNAME and the Society of Naval Architects of Japan. William G. Day Jr:. has been employed as a naval architect at the David Taylor Naval Ship R&D Center since receiving a B.E.S. degree from the Johns Hopkins University in 1966. He obtained an M.S. E. degree from George Washington University in 1971. As Head Design Evaluation Branch of the Ship Performance Department he is responsible for model experiments to evaluate the hydrodynamic performance of ships and propulsors. He is a member of ASNE and SNAME. In-Young Koh:received his B.S. and M.S. degrees in electrical engineering from Lowell University in 1969 and 1971 respectively and his Ph.D. in applied mechanics from Rensselaer Polytechnic Institute in 1976. Dr. Koh joined DTNSRDC as an electronic engineer specializing in the application of advanced instrumentation and computer techniques to ship research and design. He is currently engaged in research and development of active control systems for naval ship applications. Dr. Koh is a member of ASNE SNAME and IEEE. David Andrew Walden:is

A ship design methodology is presented for developing hull forms that attain improved performance in both seakeeping and resistance. Contrary to traditional practice, the methodology starts with developing a seakeeping-optimized hull form without making concessions to other performance considerations, such as resistance. The seakeeping-optimized hull is then modified to improve other performance characteristics without degrading the seakeeping. Presented is a point-design example produced by this methodology. Merits of the methodology and the point design are assessed on the basis of theoretical calculations and model experiments. This methodology is an integral part of the Hull Form Design System (HFDS) being developed for computer-supported naval ship design. The modularized character of HFDS and its application to hull form development are discussed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RUDDER ROLL STABILIZATION FOR COAST GUARD CUTTERS AND FRIGATES

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 267-282页

作者： BAITIS, E WOOLAVER, DA BECK, TA Dr. Erich Baitis: a native of Germany came to the David W. Taylor Naval Ship Research and Development Center in 1957 as a co-operative student/trainee and received his Bachelor of Science Degree in Physics from Virginia Polytechnic Institute. As a 32-year-old naval architect in 1971 he received both the VietnamHonorServiceMedaland the Navy'sMeritoriousCivilianServiceAwardfor his eight months as liaison with the Vietnamese NAVVS ferro-cement ship program. As head of the Seakeeping and Stabilization Group of the Surface Ship Dynamics Branch his work has led to the development of a new standard Ship Motion Computer Program and the application of ship motions to ship habitability operability and survivability problems. A major area of this work has been the ship/aircraft interface which is particularly sensitive to ship motions wind and other environmental factors. Mr. Dennis A. Woolaver:has been employed as a Naval Architect at the David W. Taylor Naval Ship Research and Development Center since 1965 where his work has resulted in numerous patents. He received his Bachelor of Science Degree in Electrical Engineering from George Washington University where he also completed graduate work in Communication Theory. Additional fields of study include Computer Science and Personnel Management. Current efforts are directed toward surface ship motion mitigation data acquisition and statistical analysis. He is a member of the Society of Naval Architects and Marine Engineers. Lt. Tom A. Beck USCG: joined the UnitedStatesCoastGuardin 1966 where he trained as an Electronics Technician. He received a Bachelor of Science Degree in Electrical Engineering from Columbia University in 1978. From 1978 to 1979 he was an Electronics Project Officer at the CoastGuardElectronics Laboratory in Alexandria Virginia. Since 1980 he has been a Research and Development Project Officer in the Sensor Technology Branch of the CoastGuardsOffice of Research and Development. Lt. Beck is a member of the Institute of Electronic and Elect

The potential use of rudders as anti-roll devices has long been recognized. However, the possible interference of this secondary function of the rudder with its primary role as the steering mechanism has prevented, for many years, the development of practical rudder roll stabilizers. The practical feasibility of rudder roll stabilization has, however, in recent years been demonstrated by two systems designed and developed for operational evaluation aboard two different U.S. C oast G uard Cutters, i.e., Jarvis and Mellon of the 3,000-ton, 378-foot HAMILTON Class. The authors describe the major components of the rudder roll stabilization (RRS) system, along with the design goals and methodology as applied to these first two prototypes. In addition, a brief history of the hardware development is provided in order to show some of the lessons learned. The near flawless performance of the prototypes over the past four years of operational use in the North Pacific is documented. Results from various sea trials and reports of the ship operators are cited and discussed. The paper concludes with a discussion of the costs and benefits of roll stabilization achieved using both a modern anti-roll fin system, as well as two different performance level RRS systems. The benefits of roll stabilization are demonstrated by the relative expansion in the operational envelopes of the USS OLIVER HAZARD PERRY (FFG-7) Class. The varying levels of roll stabilization suggest that the merits of fins and RRS systems are strongly dependent on mission requirements and the environment. The demonstrated performance of the reliable RRS system offers the naval ship acquisition manager a good economical stabilization system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

CENTML CONTROL SYSTEM TRAINING THROUGH STA TIC AND DYNAMIC SIMULATION

引用

Naval Engineers Journal 1980年第2期92卷 196-206页

作者： HALL, EDWIN E. MOSS, DONALD G. NORRIS, CLIFFORD S. PETERSON, HAROLD D. Mr. Edwin E. Hall received his Bachelor's degree in Electronics from Oklahoma City University. He also is a certified College-Level Instructor in the state of Florida and has done graduate work in Computer Science at the University of Florida. As the Technical Publications and Training Manager Simulation and Control Systems Department. General Electric Company Daytona Beach Fla. he currently is responsible for the costing. planning performance scheduling and timely completion of the Department's Technical Manuals and Technical Training Programs. These Training and Manual contracts cover Ship Systems Programs. Simulation Programs. and Communications Programs for the Armed Services and commercial customers. Mr. Hall has over twenty-years experience as a Technical Writer and Instructor and for the past seventeen years has been at the General Electric Company's Daytona Beach Facility. His experience ranges from teaching Basic Electronics and Radar Circuitry as a civilian instructor for the U.S. Army to writing Manuals Proposals Reports Specifications and Brochures for General Electric's product lines. Mr. Donald G. MOSS is a graduate of Kansas State University from which he received both his B.S. degree in Business Administration and his M.S. degree in Electrical Engineering. He is presently a Senior Systems Engineer for Control Systems in the Simulation and Control Systems Department at the General Electric Company's Daytona Beach Facility. He has been employed by General Electric for 23 years — the first seven as an Engineer and Program Manager on the Fire Control Systems for the Fleet Ballistics Missile Program the next six managing the design of control and checkout equipment on the APOLLO Program and the last ten years working on control equipment for the machinery plants of new Navy ships. Over the span of years at General Electric he has worked on propulsion control for the DD-963 propulsion electric plant and auxiliary control for the FFG-7: propulsion boiler burner electric auxiliary and car

Dynamic Simulation is defined as the hardware and software required to present to the student operator visual and audible cues and responses that are the same as those encountered when operating the Control Consoles aborad ship. This type of simulation is considered essential to the development of operator skills for critical tasks. Less critical tasks can be practiced using static simulation devices. This paper discusses the utilization of these types of training devices to train Navy crews. An overview of the Machinery Control Systems of the FFG 7 and AO 177 Class ships is discussed to provide an understanding of state‐of‐the‐art equipment development. The training programs for these two ship Classes are then reviewed to show how simulation devices are currently used by the Training Community, and this is followed by a brief discussion of the additional benefits that also are derived. © 1980 by the American Society of Naval Engineers, Inc.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Abstracts

引用

Environmental Management 1977年第1期1卷 67-96页

作者： Frankenfeld, John W. Schulz, Wolfgang McMurty, George J. Petersen, Gary W. May, G. A. Hering, F. S. Schwartz, J. I. Heywood, J. B. Chigier, N. A. Grohse, E. W. Walker, J. D. Colwell, R. R. Petrakis, L. Pergament, H. S. Thorpe, R. D. Schoepf, Richard W. Krzyczkowski, Roman Henneman, Suzanne S. Hudson, Charles L. Putnam, Evelyn S. Thiesen, Donna J. Parks, G. A. McCarty, Perry L. Leckie, J. O. Schrumpf, Barry J. Simonson, G. H. Paine, D. P. Lawrence, R. D. Pyott, W. T. Leh, M. Elders, W. Combs, J. Caplen, T. Harrison, F. L. Wong, K. M. Heft., R. E. Charnell, Robert L. Lehmann, Edward J. Mallon, Lawrence G. Hatfield, Cecile Adams, Gerald H. Johanning, James Talvitie, Antti Noll, Kenneth E. Miller, Terry Smiarowski, Joseph F. Willis, Cleve E. Foster, John H. Schlesinger, Benjamin Daetz, Douglas Lear, Donald U. Smith, Mona F. Hundemann, Audrey S. Crockett, Pernell W. Werner, Kirk G. Carroll, Thomas E. Maase, David L. Genco, Joseph E. Ifeadi, Christopher N. Lowman, F. G. Christensen, S. W. Van Winkle, W. Mattice, J. S. Harrison, Elizabeth A. Barker, James C. Chesness, Jerry L. Smith, Ralph E. Shaheeen, Donald G. Raney, R. Keith Borton, T. Wezernak, C. T. Raney, R. K. Sherwani, Jabbor K. Moreau, David H. Eisenberg, Norman A. Lynch, Cornelius J. Breeding, Roger J. Johnson, J. D. Foster, K. E. Mouat, D. A. Clark, R. Hyden, John William Owen, Wilfred Bayfield, Neil G. Barrow, Graham C. Stolz, Stephanie B. Wienckowski, Louis A. Brown, Betram S. Keyfitz, Nathan Wilson, W. L. Newman, Peter W. G. Bammi, Deepak Bammi, Dalip Goddard, James E. Chisholm, Tony Walsh, Cliff Brennan, Geoffrey Thompson, K. S. Richardson, R. Jensen, Clayton E. Brown, Dail W. Mirabito, John A. Cowing, Thomas G. Binghamton, Suny Siehl, George H. Albrecht, O. W. Alexander, Ariel Barde, Jean -Philippe Darby, William P. McMichael, Francis Clay Dunlap, Robert W. Muckleston, Keith W. Frankenhoff, Charles A. Giulini, Lorenzo T. Wyatt, T. Black, Peter E. Keating, William Thomas Leonard, M. E. Fisher, E. L. Brunelle, M. F. Dickinson, J. E. Pethig, Rudiger Clapham Exxon Research & Engineering Co. Linden Government Research Lab Coast Guard Washington D.C. Department of Transportation Washington D.C. Office For Remote Sensing of Earth Resources. NASA Earth Resources Survey Program Pennsylvania State University Washington D.C. Department of the Navy Washington D.C. Cambridge. Dept. of Mechanical Engineering Massachusetts Inst. of Technology USA Huntsville. School of Graduate Studies and Research Alabama Univ. USA Dept. of Microbiology. Office of Naval Research Maryland Univ. Arlington Research and Development Co. Pittsburgh AeroChem Research Labs. Inc. Princeton Dept. of the Interior Office of Library Services. Bibliographic Series (Final) Washington D.C. Interplan Corp. Santa Barbara Urban Mass Transportation Adm. Washington D.C. Naval Underwater Systems Center Newport Calif. Mercury Project. National Science Found Stanford Univ Washington D.C. Div. of Advanced Environmental Research & Tech. USA Corvallis. NASA Earth Resources Survey Program Oregon State Univ. Washington D.C. Riverside. Inst. of Geophysics and Planetary Physics National Science Foundation California Univ. Washington D.C. Livermore Lawrence Livermore Lab. California Univ. USA Atlantic Oceanographic and Meteorological Labs. National Oceanic and Atmospheric Administration Miami National Technical Information Service Springfield Miami Univ. Coral Gables School of Law National Oceanic and Atmospheric Administration Rockville National Academy of Sciences Office of Sea Grant Washington D. C. School of Law National Oceanic and Atmospheric Administration Office of Sea Grant. Rockville Norman. Dept. of Civil Engineering and Environmental Science. Urban Mass Transportation Administration Oklahoma Univ. Washington D. C. Knoxville.Dept. of Civil Engineering. Federal Highway Administration Tennessee Univ. Washington D. C. Amherst.Water Resources Research Center. Office of Water Research and Technology Massachusetts Univ. Washington D. C. Calif. Dept. of Industria

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：