检索结果-内蒙古大学图书馆

24th IEEE Workshop on control and Modeling for Power Electronics, COMPEL 2023

作者： Li, Chung-Yi Nien, Chin-Fu Lin, Li Chen, Hung-Chi Chang Gung University Department of Electronics Engineering Taiwan Chang Gung University Department of Computer Science and Information Engineering Taiwan National Yang Ming Chiao Tung University Institution of Electrical Control Engineering Department of Electrical and Computer Engineering Taiwan

ISBN: (纸本)9798350316186

In addition to increasing the output current, an interleaved buck converter can significantly reduce the current ripple at the output. However, the bottleneck of the interleaved buck converter application is the unbalanced inductor current. In order to achieve the current balance in the entire section of the duty cycle, this paper proposes a control architecture with interleaved alignment, using the adjustment of the duty cycle and phase offset, to analyze and realize a high output current and current balanced in three-arm series capacitor interleaved buck converters (SCIBCs) in this work. By analyzing and modeling the SCIBC and using a single-loop control architecture that feedbacks the output voltage, the proposed current-balancing method balances all inductors' current within the full duty cycle without any current sensor. In addition, the small-signal transfer function of the control signal to the output voltage and design of the controller parameters are derived according to the specification, and the SCIBC with the proposed current-balancing control with PI controller of the alignment of interleaved phase angle is constructed. The high output current and current-balancing characteristics of the proposed circuit control architecture are validated in the simulation tool SIMPLIS. © 2023 IEEE.

关键词： controllers

来源：评论

学校读者我要写书评

暂无评论

Business intelligent connection between quality and evaluation methods: a case study

引用

International Journal of Applied Systemic Studies 2022年第4期9卷 330-343页

作者： Mandellos, Georgios Tsipianitis, Dimitris Telecommunications and Information Technology Division Electrical and Computer Engineering Department University of Patras RionGR-26504 Greece Systems and Automatic Control Division Electrical and Computer Engineering Department University of Patras RionGR-26504 Greece

Nowadays, information and knowledge represent the fundamental wealth of an organisation. Enterprises try to utilise this wealth to gain advantage when making decisions such as a project’s acceptance. After a project finishes, a quality management plan defines its quality level. The business intelligence theories help the individual to evaluate the proposed plan in order to target the project’s results. But, do all the evaluation methods have the same reliability? We check the project’s quality by using paper and online questionnaire administration. Although the scope is the same, there are differences, giving different results. So, we intelligently investigated the quality of the university educational process. The results show that the administration method has a significant effect on overall results. Thus, the quality check of a project using questionnaires needs to have an attentive design, avoid points that introduce uncertainties and able to show the real opinion of the respondents. Copyright © 2022 Inderscience Enterprises Ltd.

关键词： Surveys

来源：评论

学校读者我要写书评

暂无评论

Self-Triggered Consensus Filtering over Asynchronous Communication Sensor Networks

引用

computer Modeling in engineering & Sciences 2023年第2期134卷 857-871页

作者： Huiwen Xue Jiwei Wen Akshya Kumar Swain Xiaoli Luan Key Laboratory of Advanced Process Control for Light Industry(Ministry of Education) Jiangnan UniversityWuxi214000China Department of Electrical Computer and Software EngineeringUniversity of AucklandAuckland0632New Zealand

In this paper,a self-triggered consensus filtering is developed for a class of discrete-time distributed filtering *** from existing event-triggered filtering,the self-triggered one does not require to continuously judge the trigger condition at each sampling instant and can save computational burden while achieving good state *** triggering policy is presented for pre-computing the next execution time for measurements according to the filter’s own data and the latest released data of its neighbors at the current ***,a challenging problem is that data will be asynchronously transmitted within the filtering network because each node self-triggers ***,a co-design of the self-triggered policy and asynchronous distributed filter is developed to ensure consensus of the state ***,a numerical example is given to illustrate the effectiveness of the consensus filtering approach.

关键词： Self-triggered policy sensor networks distributed consensus filtering

来源：评论

学校读者我要写书评

暂无评论

Analysis of selected dielectric parameters of insulating liquids 23

Analysis of selected dielectric parameters of insulating liq...

引用

23rd International Scientific Conference on Electric Power engineering, EPE 2023

作者： Pluzek, Aleksandra Nagi, Lukasz Koziol, Michal Zygarlicka, Malgorzata Opole University of Technology Faculty of Electrical Engineering Automatic Control and Informatics Department of Electrical Power and Renewable Energy Opole Poland Opole University of Technology Faculty of Electrical Engineering Automatic Control and Informatics Department of Computer Science Opole Poland

ISBN: (纸本)9798350335934

During the last few years, there has been a growing interest in the topic of using natural or synthetic esters as an alternative to mineral oils in oil transformers due to the easier way to obtain them and their ability to exhibit better electrical properties. In addition, more and more researchers are describing in their work that doping esters with nanoparticles is capable of further improving these properties. Therefore, in the current work, it was decided to see what effect the addition of a hydrophobic carbon shell iron nanoparticle to ORLEN mineral oil and Midel 7131 synthetic ester would have on selected electrical parameters of the insulating fluid, i.e. breakdown voltage and electrical strength. © 2023 IEEE.

关键词： Nanoparticles

来源：评论

学校读者我要写书评

暂无评论

Embedded Multi-Port Converters for Synthesis and Enhancement of Hybrid-Clamped Multilevel Converters

Embedded Multi-Port Converters for Synthesis and Enhancement...

引用

2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023

作者： Li, Yuzhuo Gunawardena, Pasan Tian, Hao Li, Yunwei University of Alberta Department of Electrical and Computer Engineering Edmonton Canada Shandong University School of Control Science and Engineering Jinan China

ISBN: (纸本)9798350316445

Leveraging a number of inner capacitors/inductors, hybrid-clamped multilevel converters (MLCs) normally face great challenges among good performance (proper charge/discharge of these devices), high efficiency (maintaining low losses) and high power density (compact profile). On the other hand, these multiple-device energy-processing requirements have been addressed well in some promising multi-port converters (MPCs), and, therefore, inspire us to implement well-developed compact MPCs to facilitate the voltage/current level generation process in hybrid-clamped MLCs. Though recently, some researchers started to integrate active cells into hybrid-clamped MLCs and improve capacitor voltage control and generate extra output levels, the systematic synthesis method is still unclear and rarely discussed in the literature. To address this gap, we propose a systematic synthesis method for those hybrid clamped MLCs that can benefit from embedding well-developed MPCs. The approach can be applied for both voltage-source and current-source hybrid-clamped MLCs, covering emerging MLCs. In particular, we also derived and verified a new mixed hybrid MLC family through an emerging current-fed dual-input isolated multi-port converter. This topology features both current-source and voltage-source benefits and is ideal for future renewable generation integration. © 2023 IEEE.

关键词： Converters Synthesis Hybrid-Clamped Multi-level Converters Multi-port Converters

来源：评论

学校读者我要写书评

暂无评论

A Weighted Average Consensus Approach for Decentralized Federated Learning

引用

Machine Intelligence Research 2022年第4期19卷 319-330页

作者： Alessandro Giuseppi Sabato Manfredi Antonio Pietrabissa Department of Computer Controland Management EngineeringUniversity of Rome La SapienzaRome 00185Italy Department of Electrical Engineering and Information Technology University of Naples Federico ⅡNaples 80125Italy

Federated learning(FedL)is a machine learning(ML)technique utilized to train deep neural networks(DeepNNs)in a distributed way without the need to share data among the federated training *** was proposed for edge computing and Internet of things(IoT)tasks in which a centralized server was responsible for coordinating and governing the training *** remove the design limitation implied by the centralized entity,this work proposes two different solutions to decentralize existing FedL algorithms,enabling the application of FedL on networks with arbitrary communication topologies,and thus extending the domain of application of FedL to more complex scenarios and new *** the two proposed algorithms,one,called FedLCon,is developed based on results from discrete-time weighted average consensus theory and is able to reconstruct the performances of the standard centralized FedL solutions,as also shown by the reported validation tests.

关键词： Federated learning(FedL) deep learning federated averaging(FedAvg) machine learning(ML) artificial intelligence discrete-time consensus distributed systems.

来源：评论

学校读者我要写书评

暂无评论

Guidance of Agricultural Ground Robots Team with an Aerial Vehicle: A Cost-Effective Solution 56

Guidance of Agricultural Ground Robots Team with an Aerial V...

引用

56th International Symposium on Robotics, ISR Europe 2023

作者： Ugurlu, Halil Ibrahim Bardakci, Deniz Pham, Huy Xuan Kayacan, Erdal The Department of Electrical and Computer Engineering Aarhus University Aarhus C8000 Denmark Automatic Control Group Department of Electrical Engineering and Information Technology Paderborn University Paderborn Germany

ISBN: (纸本)9783800761418

Increasing the operational efficiency of agricultural machines is essential by the use of artificial intelligence (AI)-based navigation, planning, and control algorithms to handle the increasing demand for food production without compromising sustainability. In this study, an end-to-end path planning algorithm (AgroRL) is proposed for aerial-ground robots team collaboration. In the proposed solution, while main operations in the field are handled by the ground vehicle, the aerial robot is responsible for re-planning a collision-free trajectory for the ground robot when the robot faces an obstacle. Deep reinforcement learning is used for training the end-to-end policy for local re-planning of the aerial robot. The agent, informed by the global trajectory, generates local plans based on depth images. Variational autoencoders are also investigated for dimension reduction of the depth images in obstacle avoidance context to speed up deep reinforcement learning and alleviate the computational complexity of the policy network. The agriculture environment is developed in the Webots open-source robot simulator for training and testing purposes. The efficiency and efficacy of the end-to-end planner are evaluated over a number of cluttered field scenarios. The simulation experiments demonstrate a single aerial vehicle guiding multiple ground robots in agricultural operations. © VDE VERLAG GMBH Berlin Offenbach.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Zero-Sequence Current Analysis Approach for Rotating Machinery Fault Diagnosis of Induction Motor Drivetrain Based on Sparse Learning

引用

IEEE Transactions on Power Electronics 2025年第7期40卷 9800-9810页

作者： Liu, Zhao-Hua Long, Jun-Jie Wei, Hua-Liang Liu, Kan Zhang, Ying-Jie Li, Xiao-Hua Hunan University of Science and Technology School of Information and Electrical Engineering Xiangtan411201 China The University of Sheffield School of Electrical and Electronic Engineering Department of Automatic Control and Systems Engineering SheffieldS1 3JD United Kingdom Hunan University College of Mechanical and Vehicle Engineering Changsha410082 China Hunan University College of Computer Science and Electronic Engineering Changsha410082 China

Fault diagnosis of rotating machinery driven by induction motors has received increasing attention. Current diagnostic methods, which can be performed on existing inverters or current transformers of three-phase induction machines, have become a more economical and reliable alternative to vibration diagnostic methods. Existing references mainly focus on the stator current analysis of single-phase, but most single-phase current analysis methods utilize only a fraction of the total information accessible in the three-phase system. Field experience shows that zero-sequence current (ZSC) has more distinctive fault characteristics compared to single-phase current, and therefore it is better to use in mechanical fault detection and diagnostic tasks. This article proposes a novel sparse learning-based method for ZSC analysis for induction rotating motor drive fault diagnosis. First, it elaborates and compares the effectiveness of ZSC in revealing fault characteristics compared with single-phase current by analyzing the fault diagnosis mechanism of ZSC. In addition, the method proposes a correlation entropy-enhanced sparse learning method for the problem of high-frequency noise and interference in the ZSC signals, so as to enhance the learning of the features of the noise-containing signals. The diagnostic efficacy of the proposed method has been verified through experiments on two real datasets. © 1986-2012 IEEE.

关键词： Induction motors

来源：评论

学校读者我要写书评

暂无评论

Innovative Automatic Tool Changing Mechanism for Robotic Arms

Innovative Automatic Tool Changing Mechanism for Robotic Arm...

引用

2024 Intermountain engineering, Technology and Computing, IETC 2024

作者： Das, Shaibal Berry, Matthew Deemyad, Taher Idaho State University Department of Electrical and Computer Engineering PocatelloID United States Idaho State University Department of Mechanical and Measurement & Control Engineering PocatelloID United States

ISBN: (纸本)9798350373073

This paper presents the development and implementation of an automatic tool-changing mechanism for industrial and collaborative robotic arms. The primary objective is to enable integration with a variety of end effectors, both active and passive, allowing the robot to autonomously switch tools without manual intervention. The system comprises three key components: a universal end-effector connector, various tools, and a customized toolbox. The universal connector will be screwed to the end of the robotic arm. It features a mechanical lock mechanism and accommodates electrical and pneumatic inlets for diverse tools. A dedicated toolbox, situated within the robot's workspace range, houses all tools for easy access. The study focuses on the design, 3D printing, and testing of two tools - an active and a passive tool - along with the innovative mechanical lock mechanism, which has been successfully developed and tested. Additionally, two industrial tasks have been defined to demonstrate the mechanism's functionality in real-world scenarios, emphasizing non-singular path trajectories between tasks. Future work includes the integration of additional sensors for enhanced automatic robot control. Overall, this research will contribute to the advancement of fully autonomous robotic systems in industrial settings. © 2024 IEEE.

关键词： End effectors

来源：评论

学校读者我要写书评

暂无评论

Adaptive control of Spur Gear Systems via Proximal Policy Optimization and Attention-Based Learning 9

Adaptive Control of Spur Gear Systems via Proximal Policy Op...

引用

9th International Conference on control, Instrumentation and Automation, ICCIA 2023

作者： Labbaf Khaniki, Mohammad Ali Mirzaeibonehkhater, Marzieh Samii, Amirhossein Manthouri, Mohammad K.N. Toosi University of Technology Department of Control Engineering Tehran Iran Indiana University-Purdue University Department of Electrical and Computer Engineering United States Technical University of Crete Department of Electrical and Computer Engineering Crete Greece Shahed University Department of Electrical and Electronic Engineering Tehran Iran

ISBN: (纸本)9798350366013

This study presents a novel approach for the adaptive control of chaotic spur gear systems using Proximal Policy Optimization (PPO) and attention-based learning. The spur gear system is known for its chaotic behavior, posing challenges for conventional control methods. In this research, the on-policy deep reinforcement learning algorithm, PPO, is employed to effectively control the chaotic dynamics of the spur gear system. PPO is a good choice for controlling chaotic systems because it can learn from the current policy, which is important in situations where the dynamics of the system can change quickly. Furthermore, the neural network architecture within the PPO framework is enhanced by incorporating a self-Attention mechanism. The attention mechanism can adaptively adjust its attention weights based on the current state and policy, allowing the network to dynamically allocate its resources to the most critical aspects of the system. The proposed adaptive control approach demonstrates promising results in effectively managing the chaotic spur gear System, offering potential applications in various real-world scenarios where such systems are encountered. © 2023 IEEE.

关键词： Reinforcement learning

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：