检索结果-内蒙古大学图书馆

2022 International Conference of Yearly Reports on Informatics, Mathematics, and Engineering, ICYRIME 2022

作者： De Magistris, Giorgio Iacobelli, Emanuele Brociek, Rafal Napoli, Christian Department of Computer Control and Management Engineering Sapienza University of Rome Via Ariosto 25 Roma00185 Italy Department of Mathematics Applications and Methods for Artificial Intelligence Faculty of Applied Mathematics Silesian University of Technology Gliwice44-100 Poland Institute for Systems Analysis and Computer Science Italian National Research Council Via dei Taurini 19 Roma00185 Italy

The ongoing COVID-19 pandemic has highlighted the importance of wearing face masks as a preventive measure to reduce the spread of the virus. In medical settings, such as hospitals and clinics, healthcare professionals and patients are required to wear surgical masks for infection control. However, the use of masks can hinder facial recognition technology, which is commonly used for identity verification and security purposes. In this paper, we propose a convolutional neural network (CNN) based approach to detect faces covered by surgical masks in medical settings. We evaluated the proposed CNN model on a test set comprising of masked and unmasked faces. The results showed that our model achieved an accuracy of over 96% in detecting masked faces. Furthermore, our model demonstrated robustness to different mask types and fit variations commonly encountered in medical settings. Our approaches reaches state of the art results in terms of accuracy and generalization. © 2022 Copyright for this paper by its authors.

关键词： COVID-19

来源：评论

学校读者我要写书评

暂无评论

Hierarchical Continual Learning for Domain-Knowledge Retention in Healthcare Federated Learning

引用

IEEE Transactions on Consumer Electronics 2025年

作者： Iqbal, Saeed Zhong, Xiaopin Khan, Muhammad Attique Wu, Zongze AlHammadi, Dina Abdulaziz Liu, Weixiang Choudhry, Imran Arshad Shenzhen University College of Mechatronics and Control Engineering Shenzhen518060 China Prince Mohammad Bin Fahd University Department of AI Alkhobar Saudi Arabia Princess Nourah bint Abdulrahman University College of Computer and Information Sciences Department of Information Systems Riyadh11671 Saudi Arabia University of Central Punjab Faculty of Information Technology and Computer Science Department of Software Engineering Lahore Pakistan

Internet of Medical Things (IoMT) applications encounter issues with data protection, continual adaptation, and domain-specific knowledge retention, especially in consumer-centric IoMT scenarios. We overcome these obstacles and facilitate effective knowledge retention and task adaptation in IoMT applications. This study attempts to create a unique privacy-preserving federated learning framework that combines a hierarchical learning structure with Continual Learning (CL). Despite the advancements in Federated Learning (FL), current models have trouble integrating changing datasets in real-time while protecting privacy, as well as catastrophic forgetting, which occurs when previously learned knowledge is lost when adjusting to new tasks. We present a hierarchical learning framework that makes use of three levels of models -Junior Model (JM), Consultant Model (CM), and Senior Consultant Model (SCM) -to overcome these drawbacks. Each level of the model aids in archived retention and domain-knowledge adaptation. To guarantee that the model maintains valuable information over time and adapts to new tasks with ease, our method blends domain adaptation strategies with ongoing learning approaches like knowledge distillation and elastic weight consolidation (EWC). We compare the suggested methodology with current state-of-the-art (SOTA) models on healthcare datasets for tasks like illness diagnosis and medical image categorization. According to our findings, the hierarchical continual learning model performs better than SOTA techniques in terms of accuracy, task adaptability, and privacy protection. In the healthcare industry, our study sets a new standard for privacy-preserving, continuously adaptable federated learning systems, allowing for real-time, scalable IoMT applications that can adapt dynamically to a variety of changing datasets. © 1975-2011 IEEE.

关键词： Patient treatment

来源：评论

学校读者我要写书评

暂无评论

Optical Evanescent Field for Direct Observation of Sub-100nm Particle Motion on Glass Surface

Optical Evanescent Field for Direct Observation of Sub-100nm...

引用

Robotics, Engineering, science, and Technology (RESTCON), International Conference on

作者： Panart Khajornrungruang Thitipat Permpatdechakul Keisuke Suzuki Aran Blattler Yutaka Terayama Daiki Goto Pipat Phaisalpanumas Natthaphon Bun-Athuek Amornphun Phunopas Dept. of Intelligent and Control System Faculty of Computer Science and Systems Engineering Mechanical Science and Technology Division Kyushu Institute of Technology Iizuka-Shi Fukuoka Japan Dept. of Interdisciplinary Informatics Graduate School of Computer Science and Systems Engineering Mechanical Information Science and Technology Division Kyushu Institute of Technology Iizuka-Shi Fukuoka Japan Dept. of Production and Robotics Engineering Faculty of Engineering King Mongkut’s University of Technology North Bangkok Bangsue Bangkok Thailand Dept. of Intelligent and Control System Graduate School of Computer Science and Systems Engineering Mechanical Science and Technology Course Kyushu Institute of Technology Iizuka-Shi Fukuoka Japan Dept. of Industiral Engineering Faculty of Engineering King Mongkut’s University of Technology North Bangkok Bangsue Bangkok Thailand Dept. of Mechanical Engineering Technology College of Industrial Technology King Mongkut’s University of Technology North Bangkok Bangsue Bangkok Thailand

To directly investigate the dynamic nanoscale phenomenon on the surface being processed in wet conditions such as precision polishing, and cleaning in semiconductor industrial, an optical method for visualization and observation of each sub-100 nm sized particle that is moving on an interface such as a silica glass surface by applying an evanescent field have been proposing. Subsequently, we developed an experimental apparatus equipped with an optical microscopy system for verifying the moving particle observation method in a laboratory scale. This article introduces some experimentally direct observation results of duplicated wet processes.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Distributed Optimal Load Frequency control with Stochastic Wind Power Generation

Distributed Optimal Load Frequency Control with Stochastic W...

引用

2021 European control Conference, ECC 2021

作者： Silani, Amirreza Cucuzzella, Michele Scherpen, Jacquelien M. A. Javad Yazdanpanah, Mohammad University of Groningen Jan C. Willems Center For Systems and Control ENTEG Faculty of Science and Engineering Groningen Netherlands University of Tehran Control Intelligent Processing Center of Excellence School of Electrical and Computer Engineering Tehran Iran Department of Electrical Computer and Biomedical Engineering University of Pavia Pavia Italy

ISBN: (纸本)9789463842365

Motivated by the inadequacy of conventional control methods for power networks with a large share of renewable generation, in this paper we study the (stochastic) passivity property of wind turbines based on the Doubly Fed Induction Generator (DFIG). Differently from the majority of the results in the literature, where renewable generation is ignored or assumed to be constant, we model wind power generation as a stochastic process, where wind speed is described by a class of stochastic differential equations. Then, we design a distributed control scheme that achieves load frequency control and economic dispatch, ensuring the stochastic stability of the controlled network. © 2021 EUCA.

关键词： Random processes

来源：评论

学校读者我要写书评

暂无评论

Predicting Off-Design Performance of Axial Compressors Using Multilayer Neural Network Model for Surge control

SSRN

引用

SSRN 2023年

作者： Elmelegy, Mohamed Ali Elhosseini, Mostafa A. Ali, Hesham Arafat Haikal, Amira Y. Instrument Maintenance support Engineer DLNG Damietta LNG Egypt College of Computer Science and Engineering Taibah University Yanbu Saudi Arabia Department of Computers and Control Systems Engineering Faculty of Engineering Mansoura University Mansoura Egypt

The incidence of surge within axial compressors profoundly influences the efficacy and reliability of aero-engines. Conventional methodologies in engine design have predominantly concentrated on the precise and efficient forecasting of critical characteristics during such occurrences. This paper presents a novel approach for predicting the surge phenomenon in axial compressors. Surge is a major issue in the operation of axial compressors, causing reduced performance, increased wear and tear, and in some cases, complete machine failure. The proposed approach utilizes a neural network model based on the compressor's design data to forecast the behavior of the compressor's working map under off-design conditions. The model is verified using real data collected over five years during compressor operation, including the opening angle of the Inlet Guided Van (IGV), an important parameter often ignored or assumed to be fixed in previous studies. The results show that the neural network-based approach effectively predicts the compressor's behavior under different operating conditions, providing valuable insights into the onset of surge and offering a real-time surge prediction and control tool. The ability to predict the compressor's working map enables optimizing its performance and controlling instability. This model was validated by comparing its predictions with real operating conditions observed over five years across various compressor operating modes. As a result, this predictive model enables the safe operation of axial compressors by mitigating instability risks during operation. This study's findings highlight the model's effectiveness, as evidenced by the minimal error observed between the predicted and actual data collected across various compressor operating modes. The model exhibits a strong performance, characterized by a high regression factor of 0.92667 and a low mean squared error of 3.04465 x 10^-3. These numerical values underscore the reliability and pr

关键词： Forecasting

来源：评论

学校读者我要写书评

暂无评论

Multi-Agent Economic Modeling Automation Technologies 9

Multi-Agent Economic Modeling Automation Technologies

引用

9th International Conference on control, Decision and Information Technologies, CoDIT 2023

作者： Zhukova, Aleksandra A. Pilnik, Nikolai P. Kamenev, Ivan G. Iusup-Akhunov, Batyrzhan B. Federal Research Center 'Computer Science and Control' of the Russian Academy of Sciences Department of Mathematical Modelling in Economic Social and Ecological Systems Vavilov st. 44 building 2 Moscow119333 Russia Federal Research Center 'Computer Science and Control' of the Russian Academy of Sciences Department of Mathematical Modelling of Economic Systems Vavilov st. 44 building 2 Moscow119333 Russia Hse University Faculty of Economic Sciences Department of Applied Economics Pokrovsky Bulvar 11 Moscow109028 Russia Fsbeihe Bauman Moscow State Technical University Department of Fundamental Sciences-11 2nd Baumanskaya street 5-1 Moscow05005 Russia The Phystech School of Applied Mathematics and Informatics Moscow Institute of Physics and Technology 9 Institutskiy per. Moscow Region Dolgoprudny141701 Russia

ISBN: (纸本)9798350311402

Complex economic models often describe the agent's decisions, i.e. choice of some controlled variables in accordance with criteria set by agents. Unlike purely statistical ones, agent-based models allow to describe processes with different modes, in which the agent's behavior changes quali-tatively when the environment (including the actions of other agents) change. The practical use of mathematical models of complex systems with a number of interacting agents is limited by complexity of their construction and possible errors when dealing with multitude of expressions. computer tools, such as the 'Ecomod' system discussed in the article, can substantially reduce the time spent on model creation and processing, and help to coordinate the work of several researchers on the model. © 2023 IEEE.

关键词： Autonomous agents

来源：评论

学校读者我要写书评

暂无评论

Predicting Off-Design Performance of Axial Compressors Using Multilayer Neural Network Model for Surge control

SSRN

引用

SSRN 2023年

作者： Elmelegy, Mohamed Ali Elhosseini, Mostafa A. Ali, Hesham Arafat Haikal, Amira Y. Instrument maintenance support engineer DLNG Damietta LNG Egypt College of Computer Science and Engineering Taibah University Yanbu Saudi Arabia Department of Computers and Control Systems Engineering Faculty of Engineering Mansoura University Mansoura Egypt

关键词： Forecasting

来源：评论

学校读者我要写书评

暂无评论

A Robotic Framework for the Robot@Factory 4.0 Competition

A Robotic Framework for the Robot@Factory 4.0 Competition

引用

IEEE International Conference on Autonomous Robot systems and Competitions (ICARSC)

作者： Ricardo B. Sousa Cláudia D. Rocha João G. Martins João Pedro Costa João Tomás Padrão José Maria Sarmento José Pedro Carvalho Maria S. Lopes Paulo G. Costa António Paulo Moreira Faculty of Engineering University of Porto (FEUP) Porto Portugal CRIIS - Centre for Robotics in Industry and Intelligent Systems INESC TEC - Institute for Systems and Computer Engineering Technology and Science Porto Portugal University of Trás-os-Montes and Alto Douro (UTAD) Vila Real Portugal C2SR - Cyber-Physical Control Systems and Robotics SYSTEC - Research Center for Systems and Technologies Porto Portugal

ISBN: (数字)9798350352344

ISBN: (纸本)9798350352351

Robotic competitions stand as platforms to propel the forefront of robotics research while nurturing STEM education, serving as hubs of both applied research and scientific innovation. In Portugal, the Portuguese Robotics Open (FNR) is an event with several robotic competitions, including the Robot@Factory 4.0 competition. This competition presents an example of deploying autonomous robots on a factory shop floor. Although the literature has works proposing frameworks for the original version of the Robot@Factory competition, none of them proposes a system framework for the Robot@Factory 4.0 version that presents the hardware, firmware, and software to complete the competition and achieve autonomous navigation. This paper proposes a complete robotic framework for the Robot@Factory 4.0 competition that is modular and open-access, enabling future participants to use and improve it in future editions. This work is the culmination of all the knowledge acquired by winning the 2022 and 2023 editions of the competition.

关键词： Technological innovation Education Propulsion Production facilities Software Hardware Autonomous robots

来源：评论

学校读者我要写书评

暂无评论

Leader-Follower Formation Tracking control of Quadrotor UAVs Using Bearing Measurements

arXiv

引用

arXiv 2025年

作者： Doodeman, Sander Tang, Zhiqi Jacinto, Marcelo Cunha, Rita Silvestre, Carlos Department of Mechanical Engineering TU/e Eindhoven University of Technology Eindhoven Netherlands Division of Decision and Control Systems KTH Royal Institute of Technology Sweden Instituto Superior Técnico University of Lisbon Portugal Department of Electrical and Computer Engineering Faculty of Science and Technology University of Macau China

This work addresses the practical problem of distributed formation tracking control of a group of quadrotor vehicles in a relaxed sensing graph topology with a very limited sensor set, where only one leader vehicle can access the global position. Other vehicles in the formation are assumed to only have access to inter-agent bearing (direction) measurements and relative velocities with respect to their neighbor agents. A hierarchical control architecture is adopted for each quadrotor, combining a high-gain attitude inner-loop and an outer-loop bearing-based formation controller with collision avoidance augmentation. The proposed method enables a group of quadrotors to track arbitrary bearing persistently exciting desired formations, including time-varying shapes and rotational maneuvers, such that each quadrotor only requires relative measurements to at least one neighboring quadrotor. The effective performance of the control strategy is validated by numerical simulations in MATLAB and real-world experiments with three quadrotors. © 2025, CC BY-NC-ND.

关键词： Unmanned aerial vehicles (UAV)

来源：评论

学校读者我要写书评

暂无评论

Stabilizing control Design by Integrable Differential Passive Outputs*

Stabilizing Control Design by Integrable Differential Passiv...

引用

IEEE Conference on Decision and control

作者： Morteza Nazari Monfared Yu Kawano Michele Cucuzzella Department of Electrical Computer and Biomedical Engineering University of Pavia Pavia Italy Graduate School of Advance Science and Engineering Hiroshima University Higashi-hiroshima Japan Jan C. Willems Center for Systems and Control ENTEG Faculty of Science and Engineering (FSE) University of Groningen (UG) Nijenborgh 4 Groningen AG the Netherlands

ISBN: (数字)9798350316339

ISBN: (纸本)9798350316346

Differential passivity of a nonlinear system has been introduced as passivity of its variational system. Applying standard passivity-based control techniques to differentially passive systems leads to controllers for the corresponding variational systems. However, it is challenging to construct controllers for the original nonlinear systems if the differential passive outputs are non-exact differential one-forms. In this letter, our objective is to provide a systematic procedure to address this issue when differential passive outputs are integrable, i.e., when non-exact differential passive outputs can be made exact by multiplying them by suitable integrating factors. In particular, under suitable detectability assumptions, we propose one static and two dynamic state feedback stabilizing controllers, where each dynamic controller has a form of input-and output-shaping, respectively. We illustrate their effectiveness by stabilization of counter-current heat exchangers.

关键词： Heating systems State feedback Systematics control design Color Nonlinear systems Standards

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：