检索结果-内蒙古大学图书馆

21st International Conference on Circuits, Systems, Communications and Computers, CSCC 2017

作者： Drabek, Pavel Tomas Bata University in Zlin Faculty of Applied Informatics Department of Automation and Control Engineering Nad Stranemi4511 Czech Republic

With today's growing focus on noise control issues and the emergence of sound quality as an important aspect of product design, acoustic material testing is becoming increasingly relevant to engineers, designers and manufacturers from a broad range of industries. Acoustic material testing is the process by which acoustic characteristics of materials are determined in terms of absorption, reflection, impedance, admittance and transmission loss. Many different methods can be used to determine the acoustic properties of materials. There are standing wave method, two-microphone free field and multimicrophone techniques, reverberation chamber method, in-situ methods and many other alternative methods based on measurement of internal properties of porous materials. The point is that some methods are preferred over others because the environment in which they are measured is closer to real practice. The article deals with the comparison of the results of the measurement in the reverberation chamber and in the interferometer. © The Authors, published by EDP Sciences, 2017.

关键词： Materials testing

来源：评论

学校读者我要写书评

暂无评论

Universal enzymatic numerical P systems with small number of enzymatic variables

引用

Science China(Information Sciences) 2018年第9期61卷 38-49页

作者： Zhiqiang ZHANG Tingfang WU ANDrei P■UN Linqiang PAN Key Laboratory of Image Information Processing and Intelligent Control of Education Ministry of China School of Automation Huazhong University of Science and Technology Department of Computer Science Faculty of Mathematics and Computer ScienceUniversity of Bucharest Bioinformatics Department National Institute of Research and Development for Biological Sciences School of Electric and Information Engineering Zhengzhou University of Light Industry

Numerical P systems(for short, NP systems) are distributed and parallel computing models inspired from the structure of living cells and economics. Enzymatic numerical P systems(for short, ENP systems) are a variant of NP systems, which have been successfully applied in designing and implementing controllers for mobile robots. Since ENP systems were proved to be Turing universal, there has been much work to simplify the universal systems, where the complexity parameters considered are the number of membranes, the degrees of polynomial production functions or the number of variables used in the *** the number of enzymatic variables, which is essential for ENP systems to reach universality, has not been investigated. Here we consider the problem of searching for the smallest number of enzymatic variables needed for universal ENP systems. We prove that for ENP systems as number acceptors working in the all-parallel or one-parallel mode, one enzymatic variable is sufficient to reach universality; while for the one-parallel ENP systems as number generators, two enzymatic variables are sufficient to reach *** results improve the best known results that the numbers of enzymatic variables are 13 and 52 for the all-parallel and one-parallel systems, respectively.

关键词： bio-inspired computing numerical P system mobile robot membrane controller universality

来源：评论

学校读者我要写书评

暂无评论

An Online Modeling Method for Formation Drillability Based on OS-Nadaboost-ELM Algorithm in Deep Drilling Process

引用

IFAC-PapersOnLine 2017年第1期50卷 12886-12891页

作者： Gan, Chao Cao, Weihua Wu, Min Chen, Xin Hu, Yule Wen, Guojun Gao, Hui Ning, Fulong Ding, Huafeng School of Automation China University of Geosciences Wuhan430074 China Hubei key Laboratory of Adavanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Faculty of Engineering China University of Geosciences Wuhan430074 China School of Mechanical Engineering & Electronic Information China University of Geosciences Wuhan430074 China

To achieve safety, high quality, and efficiency in deep drilling, it is necessary to get formation drillability around the borehole during drilling-trajectory planning and intelligent drilling control. Since the drilling data have the characteristics of low value density and noise in the process of deep drilling, it is difficult to model formation drillability in deep drilling. In this paper, a new online modeling method for formation drillability based on online sequential nadaboost extreme learning machine (OS-Nadaboost-ELM) algorithm has been proposed. Firstly, the well logging parameters are chosen as the inputs of the model, whose output is formation drillability. Then, several ELM models are established and the outputs of these models are as weak learners. Then the weak learners are combined by Nadaboost algorithm in order to get a strong learner. Finally, the recursive least squares algorithm is used to adjust the model. The numerical test results show that, in both prediction accuracy and training efficiency aspects, the proposed method is better than other prediction methods such as multiple regression, gray method, back-propagation neural networks, Nadaboost extreme learning machine and online sequential extreme learning machine. Thus the prediction model serves as the online geological model to develop intelligent drilling systems. © 2017

关键词： E-learning

来源：评论

学校读者我要写书评

暂无评论

Swarm intelligent algorithm for re-entrant hybrid flow shop scheduling problems

arXiv

引用

arXiv 2018年

作者： Han, Zhonghua Tian, Xutian Dong, Xiaoting Xie, Fanyi Faculty of Information and Control Engineering Shenyang Jianzhu University Shenyang Liaoning China Department of Digital Factory Shenyang Institute of Automation Chinese Academy of Sciences Shenyang Liaoning China Faculty of Electrical Engineering Sichuan College of Architectural Technology Deyang Sichuan China

In order to solve Re-entrant Hybrid Flowshop (RHFS) scheduling problems and establish simulations and processing models, this paper uses Wolf Pack Algorithm (WPA) as global optimization. For local assignment, it takes minimum remaining time rule. Scouting behaviors of wolf are changed in former optimization by means of levy flight, extending searching ranges and increasing rapidity of convergence. When it comes to local extremum of WPA, dynamic regenerating individuals with high similarity adds diversity. Hanming distance is used to judge individual similarity for increased quality of individuals, enhanced search performance of the algorithm in solution space and promoted evolutionary vitality.A painting workshop in a bus manufacture enterprise owns typical features of re-entrant hybrid flowshop. Regarding it as the algorithm applied target, this paper focus on resolving this problem with LDWPA (Dynamic wolf pack algorithm based on Levy Flight). Results show that LDWPA can solve re-entrant hybrid flowshop scheduling problems effectively. Copyright © 2018, The Authors. All rights reserved.

关键词： Global optimization

来源：评论

学校读者我要写书评

暂无评论

Fuzzy PID type STR based on SVR for nonlinear systems 10

Fuzzy PID type STR based on SVR for nonlinear systems

引用

10th International Conference on Electrical and Electronics engineering, ELECO 2017

作者： Uçak, Kemal Günel, Gülay Öke Faculty of Engineering Department of Electrical and Electronics Engineering Muǧla Sitki Koçman University Muǧla Turkey Faculty of Electrical and Electronics Engineering Department of Control and Automation Engineering Istanbul Technical University Istanbul Turkey

ISBN: (纸本)9786050107371

In this study, generalized self-tuning regulator (STR) based on support vector regression (SVR) which was previously introduced [1] is deployed to control a continuously stirred tank reactor (CSTR) system. The parameters of the Fuzzy PI D controller utilized in the controller block are tuned via SVR based parameter estimator and system model blocks. The performance of the controller has been evaluated by simulations carried out on the CSTR system. © 2017 EMO (Turkish Chamber of Electrical Enginners).

关键词： controllers

来源：评论

学校读者我要写书评

暂无评论

Non-stationary behavior of roof drainage systems 21

Non-stationary behavior of roof drainage systems

引用

21st International Conference on Circuits, Systems, Communications and Computers, CSCC 2017

作者： Koláček, Martin Tomas Bata University in Zlin Faculty of Applied Informatics Department of Automation and Control Engineering Nad Stranemi 4511 Zlin Czech Republic

This paper reports the non-stationary behavior of a roof drainage during experimental measurement in the climate simulator. Many buildings use a fully or partially flat roof where it is necessary to use the roof drainage. Thermal behavior of roof drainage is very important from the point of view of heat transfer and potential condensation. The placement of a roof drain slightly deteriorates thermal transmittance of the roof. This experiment evaluates roof drains in the specific climate simulator where thermal conditions were dynamically controlled in the specific temperature range. The measurement was performed for two types of roof drains. The first drainage is a simple single-shell and the second is double-shell drainage. The results show the effect on the thermal transmittance of the roof section and also the minimal effect of condensation on the non-insulation part of the drainage. Both roof drains showed minimal deterioration of thermal transmittance of the roof construction. © The Authors, published by EDP Sciences, 2017.

关键词： Drainage

来源：评论

学校读者我要写书评

暂无评论

Multi-winding bidirectional flyback converter 14

Multi-winding bidirectional flyback converter

引用

14th Brazilian Power Electronics Conference, COBEP 2017

作者： De Campos, Arceu Santos Cordeiro Gomes, Adjeferson Custodio De Morais, Aniel Silva Federal University of Uberlandia-UFU Electrical Engineering Faculty-FEELT Control and Automation Engineering Electrical Machines Laboratory and Energy Processing-LAMEP Uberlandia-MG Brazil

ISBN: (纸本)9781509062485

Smart DC micro/nanogrids have become the subject of much attention in recent years due to the growing interest in adding renewable energy sources and electric vehicles to residential and small buildings. The multi-bus hybrid microgrid has the potential to feed different loads with more appropriate voltage. This paper presents a new topology of bidirectional Flyback multiple winding converter, which can be used in microgrid systems. The proposed converter can interconnect several DC voltage buses that provide power in all directions. The control technique allows the safe converter' switching and proper power flux control. Operation stages and simulation results of a four winding converter are presented. © 2017 IEEE.

关键词： DC-DC converters

来源：评论

学校读者我要写书评

暂无评论

Thermoelectric cooling in combination with photovoltaics and thermal energy storage 21

Thermoelectric cooling in combination with photovoltaics and...

引用

21st International Conference on Circuits, Systems, Communications and Computers, CSCC 2017

作者： Skovajsa, Jan Zálešák, Martin Tomas Bata University in Zlin Faculty of Applied Informatics Department of Automation and Control Engineering Nad Stranemi 4511 Zlin Czech Republic

The article deals with the use of modern technologies that can improve the thermal comfort in buildings. The article describes the usage of thermal energy storage device based on the phase change material (PCM). The technology improves the thermal capacity of the building and it is possible to use it for active heating and cooling. It is designed as a "green technology" so it is able to use renewable energy sources, e.g., photovoltaic panels, solar thermal collectors, and heat pump. Moreover, an interesting possibility is the ability to use thermal energy storage in combination with a photovoltaic system and thermoelectric coolers. In the research, there were made measurements of the different operating modes and the results are presented in the text. © The Authors, published by EDP Sciences, 2017.

关键词： Thermal energy

来源：评论

学校读者我要写书评

暂无评论

Measurement of four-pane building window filled with a PCM 21

Measurement of four-pane building window filled with a PCM

引用

21st International Conference on Circuits, Systems, Communications and Computers, CSCC 2017

作者： Kolacek, Martin Tomas Bata University in Zlin Faculty of Applied Informatics Department of Automation and Control Engineering Nad Stranemi 4511 Zlin Czech Republic

The transparent building element filled with Phase change materials (PCMs) represent an innovative solution that can achieve thermal comfort in buildings lowering the cooling and heating demand. There are many different PCMs which are used in the building element. Salt hydrates can absorb a large amount of energy and have properties similar to water. Nevertheless, these materials have a tendency to supercool (supercooling effect) and to incongruent melt. This paper reports the results of the measurement specific four-pane window filled with a PMCs. Thermal properties of the window were tested in the climate simulator where the climatic conditions were dynamically controlled. The measurement confirmed high thermal inertia of the window and also reducing heat transfer through the window. © The Authors, published by EDP Sciences, 2017.

关键词： Phase change materials

来源：评论

学校读者我要写书评

暂无评论

Validation of new CFD release by Ground-Coupled Heat Transfer Test Cases 21

Validation of new CFD release by Ground-Coupled Heat Transfe...

引用

21st International Conference on Circuits, Systems, Communications and Computers, CSCC 2017

作者： Sehnalek, Stanislav Tomas Bata University in Zlin Faculty of Applied Informatics Department of Automation and Control Engineering Nad Stranemi 4511 Zlin Czech Republic

ISBN: (纸本)9781510849686

In this article is presented validation of ANSYS Fluent with IEA BESTEST Task 34. Article stars with outlook to the topic, afterward are described steady-state cases used for validation. Thereafter is mentioned implementation of these cases on CFD. Article is concluded with presentation of the simulated results with a comparison of those from already validated simulation software by IEA. These validation shows high correlation with an older version of tested ANSYS as well as with other main software. The paper ends by discussion with an outline of future research. © The Authors, published by EDP Sciences, 2017.

关键词： Heat transfer

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：