检索结果-内蒙古大学图书馆

Engineering eg filling of RuO_(2)enables a robust and stable acidic water oxidation

Chinese Chemical Letters 2025年第3期36卷 444-448页

作者： Qing Li Yumei Feng Yingjie Yu Yazhou Chen Yuhua Xie Fang Luo Zehui Yang State Key Laboratory of New Textile Materials&Advanced Processing Technology College of Materials Science and EngineeringWuhan Textile UniversityWuhan 430200China Faculty of Materials Science and Chemistry China University of Geosciences WuhanWuhan 430074China

Efficient and stable electrocatalyst for oxygen evolution reaction(OER)in acidic environment is vital for polymer electrolyte membrane water electrolysis(PEMWE).In this work,we have devised the formation of heterostructured RuO_(2)/MnO_(2)with nanoflower structure for acidic OER *** to commercial RuO_(2),the overpotential at 50mA/cm^(2)is decreased by 36 mV,corresponding to a 3.7-fold better mass *** boosted acidic OER performance is attributed to the heterostructure inducing more electrons are filled in e_(g)orbital of Ru atom triggering a better deprotonation of bridge oxygen atom in Ru-O_(bri)-Mn structure evidenced by pH-independent cyclic voltammetry ***,RuO_(2)/MnO_(2)sustains its acidic OER activity within 20 h,longer than commercial RuO_(2).The membrane electrode assembly(MEA)test suggests than only 2.18 V is required to achieve a current density of 5 A/cm^(2).The theoretical calculation reveals that the e_(g)filling of Ru atom is increased from 2.18 to 2.39 after MnO_(2)incorporation,reducing the energy for the formation of∗OOH moiety.

关键词： Oxygen evolution reaction Polymer electrolyte membrane water electrolysis Deprotonation e_(g)filling Heterostructure

来源：评论

学校读者我要写书评

暂无评论

Image Switching Methods for an Arc 3D Display Using Projectors and Optimal Pixel Structure of Fresnel-Type Scratches

引用

IEEE Transactions on Industry Applications 2025年第3期61卷 4463-4470页

作者： Mizushina, Haruki Taguchi, Haruto Seko, Kazuki Nishiyama, Shingo Suyama, Shiro Yamamoto, Kenji Shinshu University Faculty of Textile Science and Technology Nagano Ueda386-8567 Japan Tokushima University Institute of Post-LED Photonics Tokushima770-8506 Japan Tokushima University Department of Optical Science and Technology Tokushima770-8506 Japan Utsunomiya University Center for Optical Research and Education Utsunomiya321-8585 Japan

We proposed new methods of switching 3D images using projectors for moving images on an arc 3D display. An arc 3D display is a 3D display method that uses directional scattering of light generated by arc-shaped scratches on a substrate, but rewriting the displayed 3D images is difficult by conventional arc 3D displays. In this study, we proposed a method of switching the 3D images by selectively illuminating the arc-shaped scratches using a projector. In order to present arbitrary 3D images, we also proposed a method of displaying multiple depths by arranging the arc-shaped scratches in a grid pattern and illuminating them at different angles using multiple projectors. Furthermore, we proposed a method to avoid intersections of arc-shaped scratches by using Fresnel-type scratches, and proposed an optimal pixel arrangement for this method, and confirmed its effectiveness. © 1972-2012 IEEE.

关键词： Pixels

来源：评论

学校读者我要写书评

暂无评论

Biomordant assisted natural dyeing of cellulosic fibre: a greener approach

引用

Materials Research Innovations 2025年第1期29卷 27-34页

作者： Chowdhury, Tanvir Ahmed Khandaker, Jahirul Islam Gafur, Mohammad Abdul Repon, Md. Reazuddin Islam, Md. Kamrul Hossain, Alamgir Mollick, Swaraz Department of Physics Jahangirnagar University Dhaka Bangladesh Department of Textile Engineering Daffodil International University Dhaka Bangladesh Pilot Plant & Process Development Centre Bangladesh Council of Scientific and Industrial Research Dhaka Bangladesh Department of Bioproducts and Biosystems School of Chemical Engineering Aalto University Espoo Finland Department of Production Engineering Faculty of Mechanical Engineering and Design Kaunas University of Technology Kaunas Lithuania Department of Textile Engineering Jashore University of Science and Technology Jashore Bangladesh

Natural dyes serve as a benign alternative to their synthetic counterparts, offering a sustainable option that directly mitigates the release of toxic chemicals. In this study, cotton fabrics were dyed with neem leaf extract in acidic, neutral and alkaline condition where samples were mordanted with lemon juice. The findings revealed a direct correlation between colour strength (K/S) and pH levels, and optimal fastness properties were achieved under alkaline pH conditions when a mordant was employed. The Energy Dispersive X-ray (EDX) ensured the elemental composition of lemon juice assisted dyed fabric which indicates the effective binding of cotton fabric with neem leaves extracted dye. The Fourier Transform Infrared (FTIR) Spectroscopy analysis also confirmed the interaction of cotton fabric with dye particles. The results indicate that cotton fabric can be successfully dyed with neem leaf extract and lemon juice as the biomordant, presenting an eco-friendly and sustainable approach to dyeing practices. © 2024 Informa UK Limited, trading as Taylor & Francis Group.

关键词： Cotton fabrics

来源：评论

学校读者我要写书评

暂无评论

Preface and Acknowledgements

Springer Proceedings in Materials

引用

Springer Proceedings in Materials 2025年 59卷 vii-viii页

作者： Behera, B.K. Takatera, Masayuki Department of Textile and Fibre Engineering Indian Institute of Technology Delhi New Delhi India Faculty of Textile Science and Technology Institute for Fibre Engineering Shinshu University Nagano Japan

来源：评论

学校读者我要写书评

暂无评论

One-step fabrication of ultrathin porous Janus membrane within seconds for waterproof and breathable electronic skin

引用

science Bulletin 2025年第5期70卷 712-721页

作者： Yufeng Ni Bing Li Chengzhen Chu Shaofan Wang Yujie Jia Shichun Cao Rasoul Esmaeely Neisiany Chuanglong He Shuo Chen Zhengwei You State Key Laboratory of Advanced Fiber Materials Institute of Functional MaterialsCollege of Materials Science and EngineeringResearch Base of Textile Materials for Flexible Electronics and Biomedical Applications(China Textile Engineering Society)Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative MedicineShanghai Key Laboratory of Lightweight CompositeDonghua UniversityShanghai 201620China College of Biological Science and Medical Engineering Donghua UniversityShanghai 201620China Department of Materials and Polymer Engineering Faculty of EngineeringHakim Sabzevari UniversitySabzevar***Iran Biotechnology Centre Silesian University of TechnologyGliwice44-100Poland

It remains a challenge for a simple and scalable method to fabricate ultrathin porous Janus membranes for stretchable on-skin ***,we propose a one-step droplet spreading phase separation strategy to prepare an ultrathin and easily collected Janus thermoplastic polyurethane(TPU)membrane within *** metal-ion solvation structure mitigated migration kinetics to delay TPU solution demixing,promoting the further penetration of the coagulating ***,the developed membranes,with an average preparation rate of 25.2 cm^(2)s^(−1),had a thickness of 5μm,and the water vapor transmission rate was determined to be 663 g m^(−2) d^(−1).The small pore layer having an average pore size of 1.7μm effectively blocked external liquid *** porous Janus TPU membrane coated by liquid metal served as a building block to develop a new generation of monolithic stretchable electronics with simultaneous high permeability and waterproofness.

关键词： porous polyurethane kinetics

来源：评论

学校读者我要写书评

暂无评论

Function of Biochar: Alleviation of Heat Stress in Plants and Improvement of SoilMicrobial Communities

引用

Phyton-International Journal of Experimental Botany 2025年第4期94卷 1177-1210页

作者： Arpita Rani Roy Israt Jahan Sharah Jabeen Mou Md.Farhan Hasin Prodipto Bishnu Angon Rebeka Sultana Badhon Mazumder Md.Arif Sakil Faculty of Agriculture Bangladesh Agricultural UniversityMymensingh2202Bangladesh Department of Genetics and Plant Breeding Bangladesh Agricultural UniversityMymensingh2202Bangladesh Faculty of Veterinary Science Bangladesh Agricultural UniversityMymensingh2202Bangladesh Department of Textile Engineering Ahsanullah University of Science and TechnologyDhaka1208Bangladesh Department of Biochemistry and Molecular Biology Bangladesh Agricultural UniversityMymensingh2202Bangladesh

Global warming is making plants more susceptible to heat ***,adjustments to crop production systems are required for global food *** stress(HS)poses a threat to the quality of ecosystems and global food security due to its adverse effects on plant *** degree to which HS affects physiological disruptions,physical harm,and biochemical changes at various growth stages directly correlates with its effects on physiological functions,plant growth,and crop *** promising approach is soil modification using biochar,which enhances soil health and promotes the development of microbial communities,ultimately improving plant heat *** enhances soil structure,improves moisture retention,and increases nutrient availability in hot weather,thereby promoting plant growth and enhancing crop ***,biochar,with its porous structure and ability to provide a liming effect,increases the diversity and activity of soil microbes,thereby fostering advantageous symbiotic *** microbial communities support nutrient cycling,root growth,and general soil health,strengthening biochar’s position as a long-term solution for climate-resilient *** research concentrated on the connection between biochar and heat stress or microbial populations;however,this review uniquely combines all three elements,providing a fresh viewpoint on their interrelated functions in enhancing plant ***,this study demonstrates the potential of biochar as a sustainable component for improving soil and supporting crops that adapt to heat *** examines the processes underlying these interactions and provides recommendations for future research strategies.

关键词： Biochar heat stress soil health plant development agriculture abiotic stress

来源：评论

学校读者我要写书评

暂无评论

Driven damped harmonic oscillator revisited: energy resonance

arXiv

引用

arXiv 2025年

作者： Lelas, K. Poljak, N. Faculty of Textile Technology University of Zagreb Croatia Department of Physics Faculty of Science University of Zagreb Croatia

We derive the exact expression for the resonant frequency of the time-averaged steady-state energy and show that this frequency is excellently approximated by the arithmetic mean of the amplitude and velocity resonant frequencies. In addition, we argue that the frequency of the amplitude resonance can be regarded as the energy resonance frequency, since it provides the maximal peak values of instantaneous energy. © 2025, CC BY.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Experimental investigation on dynamic stab resistance of high-performance multi-layer textile materials

引用

Defence technology 2025年 47卷 1-14页

作者： Abtew, Mulat Alubel Boussu, François Cristian, Irina Dejene, Bekinew Kitaw University of Missouri College of Arts and Science Department of Textile and Apparel Management Columbia65211 United States Lille Université ENSAIT GEMTEX lab. 2 All. Louise et Victor Champier Roubaix59056 France Gheorghe Asachi Technical University of Iasi Faculty of Industrial Design and Business Management Iași700050 Romania Hawassa University Dept. of Textile Engineering Institute of Technology Hawassa Ethiopia

Stab-resistant textiles play a critical role in personal protection, necessitating a deeper understanding of how structural and layering factors influence their performance. The current study experimentally examines the effects of textile structure, layering, and ply orientation on the stab resistance of multi-layer textiles. Three 3D warp interlock (3DWI) structures ({f1}, {f2}, {f3}) and a 2D woven fabric ({f4}), all made of high-performance p-aramid yarns, were engineered and manufactured. Multi-layer specimens were prepared and subjected to drop-weight stabbing tests following HOSBD standards. Stabbing performance metrics, including Depth of Trauma (DoT), Depth of Penetration (DoP), and trauma deformation (Ymax, Xmax), were investigated and analyzed. Statistical analyses (Two- and One-Way ANOVA) indicated that fabric type and layer number significantly impacted DoP (P 0.05). Further detailed analysis revealed that 2D woven fabrics exhibited greater trauma deformation than 3D WIF structures. Increasing the number of layers reduced both DoP and DoT across all fabric structures, with f3 demonstrating the best performance in multi-layer configurations. Aligned ply orientations also enhanced stab resistance, underscoring the importance of alignment in dissipating impact energy. © 2025 China Ordnance Society

关键词： Fabrics

来源：评论

学校读者我要写书评

暂无评论

Fabrication of a polycarbonate/polypropylene fiber mix air filter using a melt-blowing apparatus with different nozzle diameters

引用

Journal of textile Engineering 2025年第1期71卷 1-8页

作者： Tomisawa, Ren Shibata, Yuji Kim, Kyounghou Sato, Masashi Meguro, Eiko Faculty of Textile Science and Technology Shinshu University 3-15-1 Tokida Nagano Ueda386-8567 Japan Institute for Fiber Engineering and Science Shinshu University 3-15-1 Tokida Nagano Ueda386-8567 Japan Hokuetsu Corporation Central Research Laboratory 3-5-1 Nishizao Niigata Nagaoka940-0027 Japan

Air filter filtration efficiency is determined by the particle capture-to-pressure drop ratio. We produced a melt-blown nonwoven fabric with a specific fiber diameter distribution by blending thick fibers using nozzles with different diameters. When a polycarbonate was extruded from large holes, the particle transmittance rate doubled and the pressure drop decreased by 1/3. Consequently, the quality factor increased by 1.5-fold. Most of the fibers in a pure polypropylene sample had diameters below 20 µm, even when the polypropylene was extruded from large holes. However, when polycarbonate was extruded, the distribution widened to 40 µm, and the proportion of fibers in the 20‒40 µm range increased. The pore size distribution followed a similar tendency of fiber distribution. Analysis of the fibers with diameters above 20 µm revealed that the fiber volume fraction widened markedly in the thickness direction. That is, a greater number of thick fibers ensures more air passages, thereby decreasing the pressure drop. The thick fibers form large pores, which increases the length of the flow paths of the aerosols. This increases the probability of particles contacting the fibers and suppresses particle penetration. The changes described above explain the increase in the quality factor. © 2025 The textile Machinery Society of Japan.

关键词： Pore size

来源：评论

学校读者我要写书评

暂无评论

Facile fabrication of robust, recyclable, and multifunctional composite hydrogel sensor with MXene and cellulose microcrystals

引用

Industrial Crops and Products 2025年 231卷

作者： Hasan, Md. Zahid Xu, Chuanghua Luo, Lei Motaleb, K.Z.M. Abdul Ahmed, Md Foysal Tan, Sirui Bashar, M.Mahbubul Janutėnienė, Jolanta Yue, Chengfei Tu, Hu Sha, Sha Cai, Guangming Zhang, Ruquan State Key Laboratory of New Textile Materials and Advanced Processing School of Textile Science and Engineering Wuhan Textile University Wuhan430200 China Department of Apparel Merchandising & Management BGMEA University of Fashion & Technology Dhaka1230 Bangladesh Department of Engineering Faculty of Marine Technologies and Natural Sciences Klaipeda University Klaipėda91224 Lithuania Department of Textile Engineering Mawlana Bhashani Science and Technology University Tangail1902 Bangladesh

Conductive hydrogel has garnered significant fascination for its potential as wearable sensor. However, designing a wearable sensor with excellent electrical conductivity, self-healing capability, mechanical strength and recyclability is still difficult to accomplish. Herein, a multifunctional composite hydrogel was fabricated via a one-pot method with cellulose microcrystals (CMCs) and MXene. The introduction of CMCs to the hydrogel composite provided mechanical strength and assisted in homogeneous distribution of MXene resulting the high electrical conductivity. The subsequently prepared conductive composite hydrogel exhibited improved tensile strength (87.4 kPa) and elongation at break (424 %) with optimum composition, outstanding electrical conductivity (1.11 S/cm) and quick electrical self-healing efficiency without external stimuli. The temperature responsiveness of the conductive composite hydrogel was mainly accredited for reducing interfacial thermal resistance ensuing of continuous heat conduction pathways. It also demonstrated the notable fire resistance offering quick fire-warning signals within ∼1 sec. The developed conductive composite hydrogel could monitor subtle human movements efficiently as well as possessed the ability to track human body temperature, indicating effective means of electronic skin (E-skin) for smartphone interfacing. This work introduces a feasible approach in designing an electrically conductive, biodegradable wearable composite hydrogel with potential applications as versatile motion, temperature and fire sensor. © 2025 The Authors

关键词： Microcrystals

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：