检索结果-内蒙古大学图书馆

18th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2018

作者： Uhlmann, E. Oberschmidt, D. Guhde, S. Polte, M. Polte, J. Fraunhofer Institute for Production Systems and Design Technology IPK Germany Institute for Machine Tools and Factory Management IWF Technische Universität Berlin Germany

ISBN: (纸本)9780995775121

关键词： Surface roughness

来源：评论

学校读者我要写书评

暂无评论

Wear behaviour of HIPIMS coated micro-milling tools with cutting edge preparation for machining steel moulds 18

Wear behaviour of HIPIMS coated micro-milling tools with cut...

引用

18th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2018

作者： Uhlmann, E. Kuche, Y. Polte, J. Polte, M. Fraunhofer Institute for Production Systems and Design Technology IPK Germany Institute for Machine Tools and Factory Management IWF Technische Universität Berlin Germany

ISBN: (纸本)9780995775121

Micro-milling is an appropriate process for the industrial production of precision parts in the mould and die industry. Decisive for a long tool life is the wear resistance, which can be improved by cutting edge preparation technologies and tool coatings. Especially the improvement of the coating technology with the high power impulse magnetron sputtering (HIPIMS) provides improved tool wear behaviour and longer path length lc. Further studies compare two different HIPIMS-coatings of micro-milling tools for machining the mould steel X13NiMnCuAl4-2-1-1. Furthermore, the tool wear could be reduced due to cutting edge preparation using immersed tumbling process. In consequence of the increased cutting edge radii rβ the measured active forces Fa increased slightly. Best results were achieved for micro-milling tools with cutting edge preparation and AlTiN coating. © 2018 CURRAN-CONFERENCE. All rights reserved.

关键词： Coatings

来源：评论

学校读者我要写书评

暂无评论

Laser surface hardening of engine camshaft cams

引用

Materials Today: Proceedings 2020年 30卷 478-482页

作者： Irena Lasota Vladimir Protsenko Alexey Matyushkin Mikhail Kuznetsov Sergey Gook Peter the Great St. Petersburg Polytechnic University St. Petersburg Russian Federation St. Petersburg State Marine Technical University St. Petersburg Russian Federation RWS GmbH D-76131 Karlsruhe Germany Fraunhofer Institute for Production System and Design Technology IPK Berlin Germany

The publication describes research into the laser hardening process of the camshaft cams surface. Samples of camshaft cams made of structural bearing steel were hardened using a powerful fiber laser LS-15. The effect of altering the laser surface hardening process parameters on the microstructure and microhardness of the surface was investigated. Also, the influence of low-temperature tempering after laser surface hardening was shown.

关键词： Laser surface hardening Metal treatment Microstructure Microhardness Camshaft

来源：评论

学校读者我要写书评

暂无评论

On the Selection and Application of a Convenient Energy Management Software for Industrial Purposes

引用

IOP Conference Series: Materials Science and Engineering 2021年第1期1140卷

作者： Larissa Wurster Gregor Thiele Clemens Briese Jörg Krüger Plant Development Infrastructure / Assembly Trucks (TG/MAD) Daimler Truck AG Department for Process automation and Robotics Fraunhofer Institute for Production Systems and Design Technology Department for Machine Vision Fraunhofer Institute for Production Systems and Design Technology Department for Industrial automation at the Institute for Machine Tools and Factory Management Technical University of Berlin

The profitability of companies, especially in Germany, is affected by rising energy prices and increasingly stringent energy legislation. Certification according to ISO 50.001, an international standard for energy management systems, can help to meet legal requirements and increase energy efficiency. This article offers assistance in the form of a methodology that provides a structure for the selection process of an energy management system (EnMS). Considering properties of the individual company, it helps to identify an appropriate software solution. It is applied to a globally operating metalworking company in an example study. Furthermore, the measurement infrastructure in particular is a basic requirement that should not be overlooked in addition to the process of choosing an appropriate software solution. In this context, suitable metering points or criteria must be defined as well as sufficient attention paid to the anticipated costs for acquiring and integrating new measuring transducer and energy meters. The type and number of relevant measuring points must be considered in particular. Discussing these aspects, this article facilitates the process of planning and implementing an energy monitoring.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Laser welding of Inconel 718 nickel-based alloy layer-by-layer products

引用

Materials Today: Proceedings 2020年 30卷 473-477页

作者： Alexander Voropaev Maxim Stramko Alexander Sorokin Ivan Logachev Mikhail Kuznetsov Sergey Gook St. Petersburg State Marine Technical University St. Petersburg Russian Federation Joint Stock Company «Kompozit» Russian Federation Peter the Great St. Petersburg Polytechnic University St. Petersburg Russian Federation Fraunhofer Institute for Production System and Design Technology IPK Berlin Germany

This article describes the results of the study of optimal conditions for welding alloy products - Inconel 718, made with the method of layered laser growing (SLM). The results of the study of the influence of linear energy, rigid fixation of parts during welding and heat treatment on microhardness, welding deformation and the microstructure of the welded joint are presented.

关键词： Laser welding Inconel 718 SLM Heat-treatment Microstructure

来源：评论

学校读者我要写书评

暂无评论

Demand-oriented barriers and potentials for remanufacturing in Vietnam

引用

International Journal of Sustainable Manufacturing 2020年第2-4期4卷 336-349页

作者： Guidat, Thomas Wewer, Aleksandra Kohl, Holger Seliger, Günther Department of Machine Tools and Factory Management Technische Universität Berlin Pascalstraße 8-9 Berlin10587 Germany Vietnamese German University Lê Lai Đinh Hoà Thů Dâu Môt Bình Dương Viet Nam Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstraße 8-9 Berlin10587 Germany

Since the liberalisation of its economy, Vietnam has emerged as a key location for investment in workforce-intensive assembly processes operation, through an available and cheap workforce. Soaring national consumption levels for goods and services generate in turn unprecedented quantities of waste to be treated locally. In 2015, governmental decision 16/2015/QĐ-TTg set a basis for a national waste legislation for mechanical and electronic equipment goods. Remanufacturing is a non-destructive, industrial reuse strategy which aims at restoring products to original specifications by reusing a maximum number of original components in their current form. It has potential to provide Vietnam with an alternative to low value-added repair activities. As Vietnam is the fourth market for motorcycles in the world, this paper presents a case study about barriers and potentials for remanufacturing from the market and customer perspective. Potential solutions for supporting industrial development are suggested. © 2020 Inderscience Enterprises Ltd.

关键词： Motorcycles

来源：评论

学校读者我要写书评

暂无评论

Static and in-situ synchrotron X-ray microtomography analysis of pharmaceutical tablets

引用

International journal of pharmaceutics 2025年 681卷 125829页

作者： Christian Seim Javier Gerber Jussi-Petteri Suuronen Emely Bortel Bernd Küstner Lena Müller Jean Doucet Luiz Schweitzer Enni Mattern Peter Westenberger Timm Weitkamp Bernhard Hesse Xploraytion GmbH Invalidenstraße 34 10115 Berlin Germany. Merck KGaA 64293 Darmstadt Germany. Merck Life Science KGaA 64293 Darmstadt Germany. Novitom SAS 3 Avenue Doyen Louis Weil 38000 Grenoble France. Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstraße 8 - 9 10587 Berlin Germany. Thermo Fisher Scientific Düsseldorf Germany. Synchrotron SOLEIL L'Orme des Merisiers Départementale 128 91190 Saint-Aubin France.

Pharmaceutical solid dosage forms are designed to control drug release timing and location in the body, ranging from immediate-release to delayed-release formulations such as enteric-coated tablets. Ensuring content uniformity, consistent dissolution, and intact excipients is vital for their efficacy and safety. Manufacturing flaws-like defective coatings, cracks, or porosity-can compromise performance, making precise quality control essential. X-ray computed microtomography (µCT) enables non-destructive assessment of internal morphology, coating thickness, porosity, active ingredient distribution, and density. However, conventional laboratory µCT systems may lack the resolution, sensitivity, or speed required for advanced dynamic structural analysis. Synchrotron radiation-based µCT (SR-µCT) addresses these limitations, offering significant improvements in spatial resolution and temporal performance. This paper highlights the capabilities of SR-µCT for (i) high-throughput structural analysis and (ii) time-resolved monitoring of the dissolution of solid dosage forms. A commercially available pantoprazole tablet serves as a case study to demonstrate the tradeoff between resolution and field-of-view. Structural analysis of this pantoprazole tablet includes porosity and coating thickness quantification, as well as detection of morphological defects at different voxel sizes. Additionally, a newly developed flow-through chamber which allows liquid from a 100 ml reservoir to circulate and renew during measurements is presented for dynamic disintegration studies under sink conditions. Fast dynamic time-resolved SR-µCT analysis shows the disintegration speed of multicomponent placebo formulation compacted tablets at rapid µCT tomogram recording times of 5 s, while (high-resolution) time-resolved SR-µCT captures swelling in sustained-release formulations (Beloc Zok), API (size) distribution as well as API shape distribution.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Pocket milling of composite fibre-reinforced polymer using industrial robot

引用

Procedia CIRP 2019年 85卷 183-188页

作者： Ever Grisol de Melo Tiago Borsoi Klein Sascha Reinkober Jefferson de Oliveira Gomes Eckart Uhlmann Department of Mechanical Engineering Aeronautics Institute of Technology (ITA) Marechal Eduardo Gomes 50 São José dos Campos 12228-900 Brazil Fraunhofer Institute for Production Systems and Design Technology (IPK) Pascalstraße 8-9 Berlin 10587 Germany

In the recent decades, aerospace and automotive industry are replacing metal materials by carbon fibre-reinforced polymer (CFRP). The mechanical properties of CFRP materials are very attractive due to high mechanical strength and low weight. However, there are technological challenges in the machining process for this type of material. The anisotropy and inhomogeneity of the CFRP cause high wear of the cutting tool, spalling, delamination, fuzzing, fibre pull-out, matrix cracking, thermal degradation and resulting in poor quality of the part. In addition, the requirement for processes that are more flexible within a larger work area makes the use of industrial robot (IR) a promising alternative. The present work evaluated the performance of the IR regarding motion accuracy, which influences machining conditions of composites. The trimming in a pocket milling was carried out using the factional replication of the 3k factorial design, with three levels and three factors. The tool geometry, feed rate fz and spindle speed n were selected as input parameters. In order to evaluate the robotic machining performance, resultant cutting force Fr, surface and dimensional quality were selected as output parameters to be assessed. After obtaining the force results, equations were generated for each cutting tools and Response Surface Methodology (RSM) was applied. The results show that the use of IR is a promising alternative for the CFRP machining of large aeronautical components.

关键词： carbon-fibre-reinforced polymer (CFRP) industrial robot (IR) machining process high speed cutting (HSC)

来源：评论

学校读者我要写书评

暂无评论

Smart Maintenance – dynamic model-based instructions for service operations

引用

Procedia CIRP 2019年 81卷 1417-1422页

作者： Eckart Uhlmann David Franke Eckhard Hohwieler Fraunhofer-Institute for Production Systems an Design Technology (IPK) Pascalstraße 8-9 Berlin 10587 Germany Technische Universität Berlin – Institute for Machine Tools and Factory Management (IWF) Pascalstraße 8-9 Berlin 10587 Germany

Due to the increased complexity of machines and plants service technicians have to be more trained to be able to maintain them. In many service operations it is still common to use simple service manuals like checklists. With the strong growth of the information and communication technology it is possible to create interactive and context-sensitive tools to support service technicians during operations. One problem is that these tasks are always in change by new knowledge. To solve this issue a model-based engine is being developed to dynamically generate instruction-tools for service operations for direct machine communication.

关键词： service assistance system human-machine-interaction maintenance model-based

来源：评论

学校读者我要写书评

暂无评论

Automation of Life Data Analysis Processes

引用

IOP Conference Series: Materials Science and Engineering 2021年第1期1140卷

作者： Jonathan Krämer Gregor Thiele Theresa Johanni Jörg Krüger Department for Industrial automation at the Institute for Machine Tools and Factory Management Technical University of Berlin Department for Process automation and Robotics Fraunhofer Institute for Production Systems and Design Technology

Life data analysis is an effective statistical process to gain information on the reliability of technical facilities. The Weibull analysis is a widely-used method for modeling the probabilities of different functional failures. For its application in modern manufacturing and maintenance processes, an automation of this analysis is expedient. An exemplary process of data collection and fitting of a parametric model with continuous time scale is analyzed in this article. Its automation with different statistic software tools is described and comparatively evaluated. With the ambition of minimizing manual effort in the process, a highly automated solution was developed in this research. We describe this self-implemented solution in 'R' and justify that this procedure automatizes the process more than the examined commercial implementations. The here presented work proves to be a practical real-time assistance, right now applied in aircraft maintenance.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：