检索结果-内蒙古大学图书馆

Cooling Lubricant Boundary Conditions for wet Turning Simulations

Procedia CIRP 2023年 118卷 384-389页

作者： Eckart Uhlmann Enrico Barth Kaissar Nabbout Martin Sommerfeld Benjamin Bock-Marbach Jörg Kuhnert Andrey Dovgal Technische Universität Berlin Institute for Machine Tools and Factory Management (IWF) Chair of Machine Tools and Manufacturing Technology Pascalstr. 8-9 10587 Berlin Germany Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstr. 8-9 10587 Berlin Germany Otto von Guericke University Magdeburg Institute of Process Engineering Universitaetsplatz 2 39106 Magdeburg Germany Fraunhofer Institute for Industrial Mathematics ITWM Fraunhofer-Platz 1 67663 Kaiserslautern Germany

In recent years, the rise in computation and modelling capabilities has enabled first chip formation simulations for wet cutting processes. Currently, chip formation simulations are limited to a small simulation domain around the cutting edge. Hence, vague assumptions of inflow boundary conditions of the cooling lubricant must be made. In this paper, a procedure is shown to determine the boundary conditions of the free fluid jet for different cooling lubricant strategies by combination of Particle Image Velocimetry (PIV) and meshfree fluid simulations. As a result, usual assumptions of cooling lubricant boundary conditions are evaluated and deviations are identified.

关键词： Turning Fluid Simulation

来源：评论

学校读者我要写书评

暂无评论

Comparing the performance of a nested to a continuous evolution strategy with covariance matrix adaption for optimization of drilling EDM

引用

Procedia CIRP 2022年 113卷 220-225页

作者： E. Uhlmann J. Streckenbach M. Polte M. Osmanovic F. Schick Institute for Machine Tools and Factory Management IWF Technische Universität Berlin Pascalstr. 8-9 10587 Germany Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstr. 8-9 10587 Germany

Electrical discharge machining (EDM) is a complex manufacturing process where the correlation of the individual process parameters is not fully known. When introducing new materials or complex, individual geometries in EDM, a satisfactory vector of parameters for the process must be found. This challenge is often encountered in the aerospace industry as well as in mold and tool making. One previously successful method to tackle this challenge is the stochastic optimization procedure Evolutionary Strategy (ES). Utilizing an appropriately chosen objective function, the search for a suitable vector of input parameters may be formulated as a mathematical minimization problem over the parameter space. The ES with a covariance matrix adaption (CMA) was utilized to sample from this parameter space in a stochastic manner. Examining the impact of the CMA within an ES is a promising way to gain better insight into the performance of ES. For this purpose, a vector of input parameters was optimized for a drilling EDM process with a comma and a nested comma ES with CMA. It was found that the comma ES led to a reduction in erosion duration tero of 38 % compared to the initially chosen parameters and the nested comma ES led to a reduction in erosion duration tero of 27 % compared to the same initial parameters. The additional information stored in the covariance matrix enables the ES to find a local optimum of the parameter vector faster and more consistently. This fact is verified by use of visualizations of the covariance matrix on a two-dimensional subspace. From these findings it can be concluded, that for the application of the ES to the optimization of EDM processes the CMA should be performed continuously over all generations as opposed to resetting this matrix after a number of generations.

关键词： Electrical-discharge machining Evolution strategy Optimization

来源：评论

学校读者我要写书评

暂无评论

Methodology to develop Digital Twins for energy efficient customizable IoT-Products

引用

Procedia CIRP 2021年 98卷 258-263页

作者： Theresa Riedelsheimer Sonika Gogineni Rainer Stark Fraunhofer Institute for Production Systems and Design Technology IPK Berlin Germany Technische Universität Berlin Chair Industrial Information Technology Berlin Germany

Products are increasingly individualized and enhanced to be able to communicate, e.g. via Industrial Internet of Things (IoT). However, the impact of products on sustainability (environmental and social) across their life is often not considered and analyzed. IoT-based or smart products, that are able to communicate, generate data, which can be used to monitor and optimize sustainability indicators. The Digital Twin (DT) is a new technological concept which focuses on product individual data collection and analysis. It provides the possibility to make use of the available data and optimize the systems individual sustainability as well as future product generations. However, the design and realization of such a DT requires new approaches and capabilities, which is an identified research gap. Therefore, this paper presents a methodology to develop DTs of physical IoT-based products, the so called DT V-Model with the aim to optimize the systems sustainability, specifically environmental aspects. It is based on the V-model for the development of smart products and is enhanced with additional roles and approaches for DT development. The methodology is described in detail. The result of a development cycle according to the DT-V-Model is a tested concept of a DT, which includes Digital Master (DM) data from the planning phase and Digital Shadow (DS) data from the production, operation and End of Life-phase. For a DT for energy efficiency, the Digital Master model consists of the information and models from the product development phase including the planned production and use phase energy consumption. The Digital Shadow consists of the actual production energy consumption and the use phase energy consumption. The methodology is applied to a use case of an IoT-based consumer product that can be customized to a certain degree by the consumer. A DT is developed to monitor and optimize the products energy efficiency in production and use. The necessary elements of the DT and t

关键词： IoT-devices Digital Twin Development methodology Product service systems energy consumption

来源：评论

学校读者我要写书评

暂无评论

Influence of superimposed low frequency oscillations on single-pass honing of long-chipping steel

引用

Procedia CIRP 2022年 108卷 607-612页

作者： E. Uhlmann A. Rozek Technische Universität Berlin Institute for Machine Tools and Factory Management (IWF) Pascalstraße 8-9 10587 Berlin Germany Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstr. 8-9 10587 Berlin Germany

Single-pass honing is used as a finishing process to meet high demands regarding form and dimensional accuracy of drilled bores. The disadvantages of single-pass honing compared to the conventional long-stroke honing are high process forces and torques as well as an increased risk of chip space clogging of the abrasive stones. A significant reduction in process forces and torques can be achieved by superimposing the axial movement with oscillations. In this work the kinematic basics of different oscillation parameters and their effects on single-pass honing of long-chipping steel are analyzed. It can be concluded that by superimposing low frequency oscillations in single-pass honing, the process forces and torques as well as the specific energy consumption can be reduced significantly without a decline in surface quality and form accuracy.

关键词： Surface Finish Honing Oscillation

来源：评论

学校读者我要写书评

暂无评论

Sustainability transformation challenges for manufacturing companies and their employees: An approach how a serious game prepares and fosters the transformation

引用

AIP Conference Proceedings 2024年第1期3109卷

作者： Jens Mathis Rieckmann Patrick Gering Jan Torka Fraunhofer Institute for Production Systems and Design Technology (IPK) Division Corporate Management Berlin Germany

Besides the transformation process challenge towards intelligent networked production systems, the growing demand for the topic sustainability, which is integrated with the production process, creates an additional complex challenge for manufacturing companies. The industrial transformation process with regard to the focus of the fourth industrial revolution is enlarged in terms of the inquiry of sustainability and especially the circular economy. In particular, external political, economic and environmental factors, but at the same time society changes towards a sustainable mindset of people shape the future development. This article focuses on the question of how to sensitize and qualify employees of manufacturing companies with a serious game to start the preparation of the upcoming challenges regarding sustainable transformation. Starting from an optimized holistic production system as a start setting, currently discussed topics will be added as scenarios to teach and build up abilities to be prepared and face upcoming challenges.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Payment Architecture for Decentralized Data Spaces Based on Gaia-X 9th

A Payment Architecture for Decentralized Data Spaces Based o...

引用

9th International Conference on Digital Economy, ICDEc 2024

作者： Rosa Cencic, Maiara Demer, Johannes Haberl, Sebastian Le, Van Thanh Lindow, Kai Metzner, Christian Rösler, Isabelle Schulze, Martin Tanrikulu, Cansu Wieker, Horst Winter, Christian Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstraße 8-9 Berlin10587 Germany Automotive Solution Center for Simulation Curiestraße 2 Stuttgart70563 Germany Msg Systems AG Robert-Bürkle-Str. 1 Ismaning85767 Germany SETLabs Research GmbH Elsenheimerstraße 55 München80687 Germany Saarland University of Applied Sciences Research Group Traffic Telematics Goebenstrasse 40 Saarbrücken66117 Germany Msg DAVID GmbH Mittelweg 7 Braunschweig38106 Germany Software AG Uhlandstraße 12 Darmstadt64297 Germany

ISBN: (纸本)9783031763670

The creation of decentralized data spaces opens up enormous potential for the data economy. The Gaia-X initiative aims to bring values such as data self-sovereignty, trustworthiness, and interoperability to those data spaces. However, enabling financial transactions in data ecosystems supported by data spaces based on Gaia-X is still a topic to be addressed. This paper proposes an architecture for payment services in data spaces based on Gaia-X. This architecture was developed based on use cases from two projects within the Gaia-X 4 Future Mobility project family, but it should also enable the implementation of payment services in other data spaces, with a focus on B2B ecosystems. Requirements were elicited from those use cases, selecting suitable payment methods and defining the relevant criteria for structuring an architecture compatible with the Gaia-X principles. The proposed architecture was verified through stakeholders’ feedback and one test implementation, demonstrating suitability to two Gaia-X B2B data ecosystems that are structured on data spaces with fundamentally distinct infrastructures. The contributions of the proposed architecture add to advancing standardized payment services within data spaces based on Gaia-X and reducing barriers to entry for new participants in such ecosystems. © The Author(s), under exclusive license to Springer Nature Switzerland AG 2025.

关键词： Decentralized finance

来源：评论

学校读者我要写书评

暂无评论

Experimental investigations of the workpiece-media-interaction and the surface topography formation in centrifugal disc finishing

引用

Procedia CIRP 2022年 115卷 24-29页

作者： Marco Kopp Eckart Uhlmann Christian Kneider Technische Universität Berlin Institute for Machine Tools and Factory Management (IWF) Pascalstr. 8-9 10587 Berlin Germany Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstr. 8-9 10587 Berlin Germany

In this study the workpiece-media-interaction in centrifugal disc finishing is investigated using a miniaturised free movable force measuring system. Characteristics of the workpiece-media-interaction are derived and correlated with the surface topography formation of Ti-6Al-4V workpieces. As a result, it was found that characteristics of the workpiece-media-interaction such as the contact force between the media and the workpiece, the contact duration and the contact frequency are dependent on the type of media as well as the rotational speed of the disc. Consequently, both, the type of media as well as the rotational speed of the disc have an influence on the resulting surface roughness.

关键词： centrifugal disc finishing contact forces topography formation

来源：评论

学校读者我要写书评

暂无评论

Residual stress assessment during cutting tool lifetime of CVD-diamond coated indexable inserts

引用

Procedia CIRP 2022年 108卷 799-804页

作者： E. Uhlmann D. Hinzmann Technische Universität Berlin Institute for Machine Tools and Factory Management (IWF) Pascalstr. 8-9 10587 Berlin Germany Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstr. 8-9 10587 Berlin Germany

Insufficient coating adhesion limits reproducibility regarding tool lifetime as well as workpiece quality during the application of CVD-diamond coated cutting tools. Depending on the combination of tungsten carbide substrate material, coating thickness as well as coating morphology, individual residual stress conditions exist within CVD-diamond coated cutting tool specifications. The application of these tools is accompanied by coating delamination as primary cutting tool failure. The tool lifetime of the respective cutting tool composition depends on the corresponding residual stress condition until crack development within the CVD-diamond coating initiates tool failure. During external cylindrical turning of hypereutectic aluminium silicon alloy AlSi17Cu4Mg-T6 the residual stress condition of a CVD-diamond coated cutting tool is assessed along the cutting edge, the rake face as well as flank face throughout the respective tool lifetime. Consequently, the progression of the residual stress condition until cutting tool failure regarding coating delamination is observed. During the tool lifetime of the investigated CVD-diamond cutting tools, compressive residual stress ∆σ R,c shifts to tensile residual stress ∆σ R , t underneath the cutting edge corner. The approximated residual stress difference of ∆σ R ≈ 5 GPa indicates stress peak relaxation processes, such as crack initiation, within the CVD-diamond coating.

关键词： diamond tool residual stress aluminum turning

来源：评论

学校读者我要写书评

暂无评论

Reproducibility analysis for different numerical models and experimental setups in dry orthogonal cutting of AISI 4140 steel

引用

Procedia CIRP 2024年 128卷 650-655页

作者： Christian Grimm Christian Menze Jannis Saelzer Florian Sauer Rocco Eisseler Hans-Christian Möhring Volker Schulze Andreas Zabel Eckart Uhlmann Institute for Machine Tools and Factory Management (IWF) Technische Universität Berlin Pascalstr. 8-9 10587 Berlin Germany Institute for Machine Tools (IfW) University of Stuttgart Holzgartenstr. 17 70174 Stuttgart Germany Institute of Machining Technology (ISF) TU Dortmund University Baroper Str. 303 44227 Dortmund Germany Institute of Production Science (wbk) Karlsruhe Institute of Technology Kaiserstr. 12 76131 Karlsruhe Germany Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstr. 8-9 10587 Berlin Germany

The design of machining processes still requires iterative parameter optimisation on the real process to achieve the demanded quality. In order to use simulation results as input for models of lubricated machining processes, which is the final aim of the presented work, it is necessary to assure that already the chip forming simulations under dry conditions produce valid results. Due to extreme conditions in the chip formation zone, including high contact stresses, temperatures and deformations, advanced requirements are imposed on a numerical model. In this work, orthogonal turning of AISI 4140 steel is simulated and experimentally investigated. Aiming for a critical examination of the conventional practice to validate simulation results only through a single experimental setup, the experiments are carried out redundantly on three varying turning lathes and measurement systems. Numerical simulations are performed using finite element analysis (FEA) within the software packages ABAQUS, AdvantEdge, DEFORM and Marc, as well as meshfree methods in the form of the finite pointset method (FPM) within MESHFREE and an element-free Galerkin method (EFG) in LS-DYNA. The obtained results demonstrate the characteristics of the individual simulation methods as well as the degree of reproducibility in experiments.

关键词： Machining Simulation design informatics

来源：评论

学校读者我要写书评

暂无评论

Digital Technologies Enabling Resilience in Manufacturing Networks 19th

Digital Technologies Enabling Resilience in Manufacturing Ne...

引用

19th Global Conference on Sustainable Manufacturing, GCSM 2023

作者： Koutrakis, Nikolaos-Stefanos Magnanini, Maria Chiara Uhlmann, Eckart Polte, Julian Pei, Eujin Psarommatis, Foivos Brintrup, Alexandra Fraunhofer Institute for Production Systems and Design Technology IPK Pascalstraße 8-9 Berlin10587 Germany Department of Mechanical Engineering Politecnico di Milano Via La Masa 1 Milano20156 Italy Technische Universität Berlin Pascalstraße 8-9 Berlin10587 Germany Brunel University London Kingston Lane UxbridgeUB8 3PH United Kingdom University of Oslo Gaustadalleen 23B Oslo0373 Norway Department of Engineering Institute for Manufacturing University of Cambridge CambridgeCB3 0FS United Kingdom

ISBN: (纸本)9783031774287

Unforeseen events have the potential to cause disruptions throughout the entire manufacturing value chain, ranging from interruptions in production processes on the shop floor level to shutdowns in the supply chain and logistics. These disruptions increase the necessity for the establishment of manufacturing networks that prioritize cooperation and circularity to strengthen resilience, predict and counteract such impacts. This paper provides an overview of the main digital technologies required to create a resilient and sustainable manufacturing network and the implementation of the Manufacturing as a Service (MaaS) approach. For each digital technology, a synthetic characterization is provided, with respect to requirements, exemplary applications and involved standards. Challenges on the use of such technologies are presented and suggestions for future developments on the integration and deployment of digital technologies with the aim of achieving resilience in manufacturing networks is described. © The Author(s) 2025.

关键词： Smart manufacturing

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：