检索结果-内蒙古大学图书馆

Target Systems and Decision-making to Increase Production Sustainability

Procedia CIRP 2016年 48卷 34-39页

作者： Matthias Putz Uwe Götze Johannes Stoldt Enrico Franz Fraunhofer Institute for Machine Tools and Forming Technology IWU Reichenhainer Straße 88 09126 Chemnitz Germany Chair of Management Accounting and Control Technische Universität Chemnitz Professur BWL III 09107 Chemnitz Germany

Many industrial companies are trying to improve their operation's sustainability. However, these efforts towards change are usually governed by economic considerations. This serves to neglect or at least diminish the perceivable relevance of ecologic or social consequences for investigated alternatives. This paper discusses the implications of multi-criterial target systems which extend the scope of considerations beyond economics to support the realisation of proactive environmental strategies. A special focus is set on the definition of targets as well as decision-making in brown-field planning projects. The findings are applied in a simulation-based study on the parameterisation of an energy-sensitive production control strategy.

关键词： Target systems Brown-field planning projects Sustainability Energy-sensitive production strategy Multi-objective genetic algorithm NSGA-II

来源：评论

学校读者我要写书评

暂无评论

Granulation of Extruded Plastic Wires – Influence of Tool Geometry and Process Parameters

引用

Procedia CIRP 2016年 46卷 135-138页

作者： Macario Cardone Matthias Putz Gerhard Schmidt Martin Dix Jürgen Friedrich Erich Stockmann Institute for Machine Tools and Production Processes Chemnitz University of Technology 09010 Chemnitz Germany Fraunhofer Institute for Machine Tools and Forming Technology IWU 09126 Chemnitz Germany Gebr. Saacke GmbH & Co. KG 75181 Pforzheim Germany Reduction Engineering GmbH 70825 Korntal-Münchingen Germany

Granulators cut extruded elastomer wires in small pieces, which can be used as starting raw material for injection molding. This contribution investigates the most relevant parameters of process and tool geometry for the granulation technology, with the aim of improving process efficiency and granule quality. Fiber-reinforced PA and ABS plastics have been analyzed using a dedicated test bench and finite element simulations. High-speed camera and various sensors were used to investigate the cutting process. The considered geometrical and kinematic parameters have been varied within a broad range in order to determine optimum values.

关键词： Cutting tool Fiber reinforced plastic (FRP) Finite Element Method (FEM) Granulation

来源：评论

学校读者我要写书评

暂无评论

Improving Performance of Turn-milling by Controlling Forces and Thermally Induced Tool-center Point (TCP) Displacement

引用

Procedia CIRP 2016年 40卷 481-485页

作者： M. Putz S. Ihlenfeldt U. Karaguzel U. Semmler E. Budak M. Bakkal R. Wertheim Fraunhofer Institute for Machine Tools and Forming Technology IWU 09126 Chemnitz Germany Mechanical Engineering Department Istanbul Technical University 34437 Istanbul Turkey Faculty of Engineering and Natural Sciences Sabanci University 81474 Istanbul Turkey

Improving performance during fine turn-milling operations including accuracy and productivity requires controlling of the cutting forces and the thermally induced displacement of the cutting edge. The objective of this investigation is to determine the thermally induced displacement of TCP during turn-milling and to reduce this displacement by using pressurized cooled air. The forces and tool elongation simulated by FEM are compared to measured values. It was shown that the amount of tool elongation could be 40% of the depth of cut in fine turn-milling, and it is possible to predict the tool elongation by FEM. Furthermore, cooled air can reduce the tool elongation by 65%.

关键词： Thermal effects Machining Finite Element Method (FEM)

来源：评论

学校读者我要写书评

暂无评论

Process combination of hydroforming and injection moulding for the insitu manufacturing of metal and plastic composite structures 20th

Process combination of hydroforming and injection moulding f...

引用

20th Symposium on Composites, 2015

作者： Albert, André Drossel, Welf-Guntram Zorn, Wolfgang Nendel, Wolfgang Raithel, Dirk Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz Germany Technische Universität Chemnitz Chemnitz Germany

ISBN: (纸本)9783038355151

The use of lightweight structures is a major trend in the reduction of fuel consumption and CO2 emissions, especially in transport. Metal plastic hybrid structures are an efficient solution to use the best material at every point in the design space. In the state of the art production technologies, the metal parts are produced separately from the plastic parts. The injection moulding process is only used for forming the plastic parts and for joining. These process chains are very extensive. The article shows the development of new process combinations. The aim is a combination of metal forming and injection moulding in one die and one process. One part should be produced with every single stroke of the press. In the first step, deep drawing, injection molding and media based forming with the plastic melt were successfully merged in one tool and one process. It was possible to integrate the injection moulding process into a deep drawing machine. In the next step, it was possible to successfully combine hydroforming and injection molding. For this process combination the hydroforming process is integrated into an injection moulding press. Different surface structures of the metal tubes, such as sandblasting, knurling and laser structuring, were systematically tested regarding to their properties as an adhesion promoter. The target is to establish a purely mechanical connection between the hydroformed metal component and the injection moulded component from glass fibre reinforced plastic instead of the chemical bonding agents often used previously, such as Vestamelt®. © (2015) Trans Tech Publications, Switzerland.

关键词： Metals

来源：评论

学校读者我要写书评

暂无评论

Extending the Scope of Future Learning Factories by Using Synergies Through an Interconnection of Sites and Process Chains

引用

Procedia CIRP 2016年 54卷 124-129页

作者： Max Weeber Christian Gebbe Max Lutter-Günther J. Böhner J. Glasschroeder R. Steinhilper G. Reinhart Fraunhofer Institute for Manufacturing Engineering and Automation IPA Project Group Process Innovation at Bayreuth University Universitaetsstrasse 30 D-95447 Bayreuth Germany Fraunhofer Institute for Machine Tools and Forming Technology IWU Project Group Resource-efficient Mechatronic Processing Machines Beim Glaspalast 5 D-86153 Augsburg Germany

Learning factories serve as platforms to disseminate research findings into industrial practice and to educate prospective engineers in hands-on courses. The number of competences which can be taught in learning factories is related with the number of available processes and machines. A larger number of machines enables for example comparisons between similar processes, the operation of longer process chains and generally speaking a broader curriculum. However, due to financial or space restrictions the investment in machines is often limited. In order to overcome this issue, the collaboration between learning factories through interconnection of process chains is proposed in this paper. A systematic method, by which possible interlinkages can be found, is presented and a case study of the interlinkage of two learning factories in Bayreuth and Augsburg is given.

关键词： Resource efficiency Learning Factory Networks Collaboration CFRP Additive Manufacturing Virtual Learning

来源：评论

学校读者我要写书评

暂无评论

Influence of process induced damages on joint strength when self-pierce riveting carbon fiber reinforced plastics with aluminum 18th

Influence of process induced damages on joint strength when ...

引用

18th International ESAFORM Conference on Material forming, ESAFORM 2015

作者： Landgrebe, Dirk Jäckel, Mathias Niegsch, Ronald Fraunhofer Institute for Machine Tools and Forming Technology IWU Nöthnitzer Straße 44 Dresden01189 Germany

ISBN: (纸本)9783038354710

The importance of environment friendly mobility strengthens the need of lightweight design in the automotive industry. New electric car models, like the BMW i3, already have car body with a high amount of carbon fiber reinforced plastics (CFRP) to allow, as a result of the low vehicle weight, appropriate ranges without reloading the battery. Methods for joining materials like CFRP play a key role to implement lightweight designs into car body production. Conventional joining methods like spot welding cannot be used for such material combinations. Due to the good automation and possible combination with adhesive, mechanical joining techniques such as selfpierce riveting (SPR) are very relevant for joining these lightweight materials. While generally selfpierce riveting of CFRP with aluminium is possible, different damages e.g. delaminations, fiber or matrix fractures in the CFRP can occur during the joining process and have to be considered. This paper shows an analysis of these process induced damages when self-pierce riveting CFRP compound with aluminum sheet metal and investigates their influence on the joint strength. In our research the conventional SPR process of CFRP-aluminium joints is compared to the application of a new die concept for SPR in which a separated die is used to reduce the process induced delaminations in the CFRP. Additionally, these joining results are contrasted to SPR joints with predrilled CFRP components. Through the pre-drilling the damages in the CFRP can nearly be avoided completely and so these joints can be used as a reference. The results of the three processes to produce CFRP-aluminum joints are compared by micrographs, computed tomography and strength tests. © (2015) Trans Tech Publications, Switzerland.

关键词： Carbon fiber reinforced plastics

来源：评论

学校读者我要写书评

暂无评论

Surface Finish Machining of Medical Parts Using Plasma Electrolytic Polishing

引用

Procedia CIRP 2016年 49卷 83-87页

作者： Henning Zeidler Falko Boettger-Hiller Jan Edelmann Andreas Schubert Technische Universität Chemnitz Professorship Micromanufacturing Technology Reichenhainer Str. 70 09126 Chemnitz Germany Beckmann-Institut für Technologieentwicklung e.V. Turleyring 15 09376 Oelsnitz/E. Germany Fraunhofer Institute for Machine Tools and Forming Technology IWU Reichenhainer Str. 88 09126 Chemnitz Germany

Biomanufactured parts, for implant or generally in-vivo use, have high requirements for surface properties. Depending on their field of application, not only smooth, but also well-defined surfaces, i.e. roughness parameters, must be set to allow for the respective functionalities such as optimal cell growth or minimal friction and wear. While for many parts mechanical polishing procedures are state-of-the-art, which are time-consuming and limited in their flexibility, established electrolytic polishing processes often incorporate aggressive media such as acids. Plasma electrolytic Polishing (PeP), a high-voltage process combining anode dissolution and plasma-chemical processes, can be considered a suitable alternative. The paper focusses on current investigations of PeP and shows application scenarios, also pointing out necessary development directions to introduce PeP to industrial biomanufacturing process chains.

关键词： Plasma electrolytic Polishing PeP surface functionalisation polishing

来源：评论

学校读者我要写书评

暂无评论

Development of a Dynamic Substructuring Framework to Facilitate in Situ Machining Solutions Using Mobile machine tools

引用

Procedia Manufacturing 2015年 1卷 756-767页

作者： Mohit Law Hendrik Rentzsch Steffen Ihlenfeldt Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz Germany

In situ machining of large parts using mobile machines that are moved to part location(s) allows these parts to be machined, repaired and maintained directly on the site of operation. However, every new part and location that the machine is moved to results in different boundary conditions for the machine-part system which singularly influences the dynamics of the combined system and makes for difficult planning of first-time right machining solutions. To facilitate the planning of in situ machining solutions, this paper presents a dynamic substructuring framework that can predict assembled system dynamics by combining measured and/or modelled substructural response of the individual components under varying base/part/contact/configuration characteristics. Substructural coupling is formulated in the frequency and the continuous-time domains for representative examples of the mobile machine being connected to two different part/base models. The frequency based substructuring approach is used to predict tool point dynamics, results of which are instructive for designing of machining strategies to ensure stable productive cutting conditions. State-space substructural coupling predicts the changing nature of the plant model under the varying influences, which provides guidelines for designing appropriate control strategies and selection of appropriate CNC control parameters. Methods presented aid establishment of experimental guidelines for planning of first-time right in situ machining solutions.

关键词： Dynamic substructuring mobile machine tool in situ machining varying boundary conditions receptances state-space coupling modular synthesis mutability

来源：评论

学校读者我要写书评

暂无评论

Process combinations for the manufacturing of metal-plastic hybrid parts

引用

IOP Conference Series: Materials Science and Engineering 2016年第1期118卷

作者： W-G Drossel C Lies A Albert R Haase R Müller P Scholz Fraunhofer Institute for Machine Tools and Forming Technology IWU Chemnitz Germany

The usage of innovative lightweight materials and processing technologies gains importance in manifold industrial scopes. Especially for moving parts and mobility products the weight is decisively. The aerospace and automotive industries use light and high-strength materials to reduce weight and energy consumption and thereby improve the performance of their products. Composites with reinforced plastics are of particular importance. They offer a low density in combination with high specific stiffness and strength. A pure material substitution through reinforced plastics is still not economical. The approach of using hybrid metal-plastic structures with the principle of 'using the right material at the right place' is a promising solution for the economical realization of lightweight structures with a high achievement potential. The article shows four innovative manufacturing possibilities for the realization of metal-plastic-hybrid parts.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Mechanical joining of materials with limited ductility: Analysis of process-induced defects

引用

AIP Conference Proceedings 2017年第1期1896卷

作者： M. Jäckel S. Coppieters M. Hofmann N. Vandermeiren D. Landgrebe D. Debruyne T. Wallmersberger K. Faes 1Fraunhofer Institute for Machine Tools and Forming Technology IWU (Dresden Germany) 2KU Leuven Technology Campus Ghent Department of Materials Engineering (Ghent Belgium) 3TU Dresden Institute for Solid Mechanics (Dresden Germany) 4Belgium Welding Institute (Ghent Belgium)

The paper shows experimental and numerical analyses of the clinching process of 6xxx series aluminum sheets in T6 condition and the self-pierce riveting process of an aluminum die casting. In the experimental investigations the damage behavior of the materials when using different tool parameters is analyzed. The focus of the numerical investigations is the damage prediction by a comparison of different damage criteria. Moreover, strength-and fatigue tests were carried out to investigate the influence of the joining process-induced damages on the strength properties of the joints.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：