作者：
DONAHUE, JCMCMAHON, EJNELSON, LWCommander John C. Donahue
USN:is the Deputy Technical Director for NAVSEA PMS 399 the FFG 7 class Acquisition Project Office. In addition he is the FFG 7 class Fin Stabilizer System Program Manager. Cdr. Donahue is an Engineering Duty Officer and Surface Warfare Officer who holds a BS in marine engineering from the California Maritime Academy a BS in business administration and an MS in material management from the Naval Postgraduate School. He is a designated Weapons Systems Acquisition Manager. Cdr. Donahue's sea service includes three tours culminating as chief engineer in USSFarragut (DLG-6) during that ship's complex overhaul as the DLG pilot ship for the 1200 PSI improvement program. Significant shore duty includes the Philadelphia Naval Shipyard where he served as theBelknapproject officer during that ship's repair restoration and modernization following its collision with USSJohn F. Kennedy (CV-67) Assistant Sixth Fleet Maintenance Officer and the Naval Research Laboratory. Cdr. Donahue was the charter president of the ASNE Section at the Naval Postgraduate School. Edward J. McMahon:is founder and President
Reliability Sciences Incorporated (RSI) and has been supporting NAVSEA on the FFG 7 Class fin stabilizer system procurement since 1977. Mr. McMahon has a BSME from New Jersey Institute of Technology and has done graduate work in electrical engineering operations research and engineering administration at New Jersey Institute of Technology Seton Hall University University of Alabama and George Washington University. He has authored and presented various papers on reliability and electrostatic discharge control and coauthored a book Electrostatic Discharge Control — Successful Methods for Microelectronics Design and Manufacturingpublished by Hayden Publishing Company 1983. Mr. McMahon is a registered Professional Engineer and listed in Who's Who 1977 1978 1982 and 1983. Louis W. Nelson:is an electrical engineer with the NAVSEA Surface Ship Control and Hydraulic System Branch where he ha
This paper discusses the new fin stabilizer system developed for the FFG 7 class ships. The paper includes: a brief history of fin stabilizers, the advantages of fin stabilizers on Navy combatants, brief theory of sys...
This paper discusses the new fin stabilizer system developed for the FFG 7 class ships. The paper includes: a brief history of fin stabilizers, the advantages of fin stabilizers on Navy combatants, brief theory of system operation, the approaches used in system development, and an up to date program status. This paper furthers Nelson and McCallum's paper [1] which addresses the infancy of the FFG 7 fin stabilizer system development program.
作者：
VOELKER, RGLEN, IFSEIBOLD, FBAYLY, IRichard Voelker:is Vice President of ARCTEC
Incorporated a firm specializing in cold regions technology. He has been responsible for the management of thePolarClass Traffic-ability Program since its inception and annually participates in the field data collection in the Arctic. His prior experience includes positions with the U.S. Coast Guard in the icebreaker design project the Military Sealift Command and at Newport News Shipbuilding. He is a graduate of N. Y.S. Maritime College and has a MS degree from the University of Michigan. I.F. Glen:received his professional degrees in naval architecture from the Royal Naval Engineering College
Manadon Plymouth and RN College Greenwich London entering the Royal Corps of Naval Constructors in 1967. After serving as a Constructor Lieutenant in the Royal Navy's Far East Fleet for a short period he joined the Polaris submarine project team in Bath England in 1968. In 1971 he was seconded to the Canadian Department of National Defense in Ottawa as a Constructor Lieutenant Commander under NATO exchange arrangements where he had responsibilities initially for conventional submarines and latterly for computer aided conceptual design. He ventured to Bath England in 1974 and joined Forward Design Group. In 1975 he took a position as a civilian engineer in the Canadian Defense Department and was Head of Hull Systems Engineering from 1977 to 1979. He joined ARCTEC CANADA LIMITED in 1980 and in addition to managing ice model testing projects and full scale trials has specialized in structural response of ships to ice impact. He headed ARCTEC's Kanata Laboratory from 1981 to 1983 when he was promoted to president. Frederick Seibold:is a research program manager with the Maritime Administration's Office of Advanced Ship Development and Technology. He is responsible for the marine science program which includes research in the areas of ship powering
structures and propeller performance and Arctic technology. Mr. Seibold has been employed by Mar Ad since 1961 having hel
This paper describes a multiyear program to make an operational assessment on the feasibility of a year-round Arctic marine transportation system to serve Alaska. Specifically, the three objectives were to: collect me...
This paper describes a multiyear program to make an operational assessment on the feasibility of a year-round Arctic marine transportation system to serve Alaska. Specifically, the three objectives were to: collect meteorological and ice data along potential marine routes; instrument the hull and propulsion machinery to improve design critera for ice-worthy ships; and demonstrate that ships can operate in midwinter Alaskan Arctic ice conditions. The U.S. Coast Guard's Polar class icebreakers were used to make the operational assessment by annually extending the route northward and by operating throughout the winter season. This paper reviews some of the operational and technical achievements to date, as well as plans for future Arctic deployments.
The Ship Energy Conservation Assist Team (SECAT) program was initiated in Fiscal Year (FY) 82 by the Naval Sea Systems Command (NAVSEA) to demonstrate and introduce individual Ship Commands to known energy conserving ...
The Ship Energy Conservation Assist Team (SECAT) program was initiated in Fiscal Year (FY) 82 by the Naval Sea Systems Command (NAVSEA) to demonstrate and introduce individual Ship Commands to known energy conserving techniques without adding equipment complexity or additional maintenance burden. The principal objective is to provide each ship with an energy consumption, coupled with recommended energy conservation strategies. The technique involves both in-port and underway monitoring and introduction of energy efficient machinery plant alignments, fuel consumption curve generation, and most efficient speed curves. The program has completed visits on six combatants and enjoys the support of both the Commander, Naval Surface Forces, U.S. Atlantic Fleet (COMNAVSURFLANT) and the Commander-in-Chief, U.S. Atlantic Fleet (CINCLANT). Plans are to perform SECAT on additional DDG 2 and FF 1052/1078 Class ships and initiate SECAT on additional ship types in FY 83.
作者：
DETOLLA, JPFLEMING, JRJoseph DeTolla:is a ship systems engineer in the Ship Systems Engineering Division
SEA 56D5 at the Naval Sea Systems Command. His career with the Navy started in 1965 at the Philadelphia Naval Shipyard Design Division. In 1971 he transferred to the Naval Ship Engineering Center. He has held positions as a fluid systems design engineer and auxiliary systems design integration engineer. Mr. DeTolla has worked extensively in the synthesis and analysis of total energy systems notably the design development of the FFG-7 class waste heat recovery system. He is NA VSEA's machinery group computer supported design project coordinator and is managing the development of a machinery systems data base load forecasting algorithms and design analysis computer programs. Mr. DeTolla has a bachelor of science degree in mechanical engineering from Drexel University and a master of engineering administration degree from George Washington University. He is a registered professional engineer in the District of Columbia and has written several technical papers on waste heat recovery and energy conservation. Jeffrey Fleming:is a senior project engineer in the Energy R&D Office at the David Taylor Naval Ship R&D Center. In his current position as group leader for the future fleet energy conservation portion of the Navy's energy R&D program
he is responsible for the identification and development of advanced components and subsystems which will lead to reductions in the fossil fuel consumption of future ships. Over the past several years he has also directed the development and application of total energy computer analysis techniques for the assessment of conventional and advanced shipboard machinery concepts. Mr. Fleming is a 1971 graduate electrical engineer of Virginia Polytechnic Institute and received his MS in electrical engineering from Johns Hopkins University in 1975. Mr. Fleming has authored various technical publications and was the recipient of the Severn Technical Society's “Best Technical Paper of the Year” award in 1
In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and...
In support of the Navy's efforts to improve the energy usage of future ships and thereby to reduce fleet operating costs, a large scale computer model has been developed by the David Taylor Naval Ship Research and Development Center (DTNSRDC) to analyze the performance of shipboard energy systems for applications other than nuclear or oil-fired steam propulsion plants. This paper discusses the applications and utility of this computer program as a performance analysis tool for design of ship machinery systems. The program is a simulation model that performs a complete thermodynamic analysis of a user-specified energy system. It offers considerable flexibility in analyzing a variety of propulsion, electrical, and auxiliary plant configurations through a component building block structure. Component subroutines that model the performance of shipboard equipment such as engines, boilers, generators, and compressors are available from the program library. Component subroutines are selected and linked in the program to model the desired machinery plant functional configurations. The operation of the defined shipboard energy system may then be simulated over a user-specified scenario of temperature, time, and load profiles. The program output furnishes information on component operating characteristics and fuel demands, which allows evaluation of the total system performance.
In this article, a study of State intervention in urban planning in post-World-War-II Italy is presented. These interventions are explained dialectically as attempted solutions to the contradictions and conflicts surr...
In this article, a study of State intervention in urban planning in post-World-War-II Italy is presented. These interventions are explained dialectically as attempted solutions to the contradictions and conflicts surrounding the use of urban land. The major contradiction centers around the necessity for a more rational urban development and the private control of urban land. The conflicts generated by this contradiction arc seen as historically specific and tied to changes in the class struggle. Through historical analysis, I show how various planning laws were the response to legitimation needs raised by developments in the class struggle. The Italian State, however, is constrained by: (1) its commitment to supporting capital accumulation through the private appropriation of urban land; and (2) its political indebtedness to real-estate interests, thus making attempts at land-use planning cither stillborn or inadequate and contradictory, generating, in turn, other contradictions and struggles.
This paper describes how conjoint analysis can be applied to health care marketing. Data from a sample of 73 university students were used to estimate part-worth values for different levels of attributes of ambulatory...
The rich geography and complex temporal trends of U.S. interstate labor force migration are portrayed. The most commonly reported net migration statistics hide multi-faceted patterns of state-to-state exchange. Maps d...
The objective of the program reported in this paper was to assess the explosion and fire hazard associated with the crude-oil offloading facility proposed for the Deep Water Port, Galveston, Texas. Explosion damage es...
详细信息
The objective of the program reported in this paper was to assess the explosion and fire hazard associated with the crude-oil offloading facility proposed for the Deep Water Port, Galveston, Texas. Explosion damage estimates were made for two conditions;the ″worst case,″ which involved 36 percent of the tanks of the largest tanker. Fire effects were investigated on the basis of six fire scenarios. Fire-control techniques were postulated and equipment characteristics and quantities were defined. The inert-gas system (IGS) was evaluated in terms of operational characteristics, reliability, failure modes and effects, and controls.
暂无评论