检索结果-内蒙古大学图书馆

Effect of Cu addition on electrochemical activity of ribbons of Mg-Al-Ca anode materials for magnesium rechargeable batteries manufactured by rapid solidification method

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2024年第1期74卷 14-17页

作者： Fukui, Shunsaku Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama Japan CHUETSU METAL WORKS CO. LTD. Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Kawaguchi Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

The potential for magnesium storage batteries to become the next generation of rechargeable batteries is high. This is largely due to the abundance of magnesium metal resources and their high safety and electric capacity per volume. Our research team has been studying magnesium alloys as anode materials for these batteries. Specifically, we have been investigating the electrochemical activity and mechanism of adding copper to Mg-9mass%Al and Mg-9mass%Al-3mass%Ca. Our findings indicate that the electrochemical activity increased with the addition of 1mass%Cu, but decreased with the addition of 3mass%Cu. In addition, changes in lattice constant and basal orientation were also observed. These changes decreased with 1mass%Cu and increased with 3mass%Cu. SEM observations showed that the cell delimitation was indistinct for the 1%Cu addition. © 2024 The Japan Institute of Light Metals.

关键词： Secondary batteries

来源：评论

学校读者我要写书评

暂无评论

Shark Skin Denticles: From Morphological Diversity to Multi-functional Adaptations and Applications

引用

Advanced Functional materials 2024年第35期34卷

作者： Ghimire, Ashish Dahl, Rikke Beckmann Shen, Sheng-Feng Chen, Po-Yu Dept. of Materials Science and Engineering National Tsing Hua University Hsinchu300044 Taiwan Biodiversity Research Center Academia Sinica Taipei115201 Taiwan Dept. of Life Science National Taiwan Normal University Taipei116059 Taiwan Biodiversity Program Taiwan International Graduate Program Academia Sinica and National Taiwan Normal University Taiwan

The energy crisis of the 1970s sparked growing concern over minimizing fuel consumption in water, land, and air transportation. Researchers fascinated by sharks' effortless swimming abilities investigated shark skin denticles and uncovered functions beyond drag reduction, such as antifouling, protection, and bioluminescence. Over the past five decades, significant progress has been made in comprehending drag reduction and antifouling functions of denticle structures;however, the investigation of other functions remains limited. Recent discoveries of diverse denticle morphologies have ignited a keen interest in obtaining morphogroups that can aid other functional studies. This work integrates advances in antifouling, hydrodynamics, aerodynamics, bioluminescence, and protective functions to provide a holistic understanding of their diverse roles. Additionally, this work also dictates multi-functional adaptations of denticles and contributes to the relatively less-explored but essential aspects, such as protective functions and denticle morphogroups. By examining these functions together, this work aims to uncover potential synergies and interactions, facilitating the development of multifunctional materials inspired by shark skin denticles. © 2024 Wiley-VCH GmbH.

关键词： Hydrodynamics

来源：评论

学校读者我要写书评

暂无评论

Early and advanced crystallization stages in lithia-alumina-silica glasses nucleated by ZrO2

引用

Ceramics International 2025年

作者： Revelo, Raúl Julián Souza, Mauricio Lima Pena, Rafaella Bartz Yoshida, Satoshi Zanotto, Edgar Dutra Federal University of São Carlos Graduate Program in Materials Science and Engineering SP São Carlos13565-905 Brazil São Carlos Institute of Physics University of São Paulo SP São Carlos13566-590 Brazil Materials Integration Laboratories AGC Inc 1-1 Suehiro-Cho Tsurumi-Ku Kanagawa Yokohama230-0045 Japan

ZrO2 is one of the most effective and widely used nucleating agents in various families of glass-ceramics;however, its detailed mechanism remains a subject of debate. Understanding its nucleation mechanism requires a thorough analysis of microstructural evolution and the identification of factors influencing this process. This study investigates the effects of ZrO2 incorporation on the internal nucleation and microstructural evolution in stoichiometric LAS (Li2O·Al2O3·nSiO2) glass-ceramics of varying composition. Glasses with different SiO2 molar ratios (n = 2, 4, 5, and 6) were prepared with ZrO2 additions of 3.0 and 3.5 mol%. Several thermal treatments were employed, followed by characterization using XRD, SEM, STEM, and Raman spectroscopy. The results indicate that a minimum of 3.5 mol% ZrO2 is required to induce internal nucleation in LAS glasses with n = 4, 5, and 6. In these compositions, Zr-enriched regions formed through liquid-liquid phase separation serve as preferential sites for ZrO2 crystal precipitation, which subsequently induces the nucleation of β-quartz solid solution. Upon further treatment at higher temperatures, this metastable phase transforms into β-spodumene or its solid solution. As expected, increasing SiO2 content enhances glass network polymerization, as evidenced by the increased presence of Q3 species in Raman spectroscopy, leading to higher characteristic temperatures of glass transition and peak crystallization in DSC analyses. A higher SiO2 content results in fewer but larger crystals, whereas a lower SiO2 content promotes a higher number density of crystals within the glass matrix. © 2025 Elsevier Ltd and Techna Group S.r.l.

关键词： Glass ceramics

来源：评论

学校读者我要写书评

暂无评论

Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing

引用

materials 2023年第21期16卷 6989-6989页

作者： Fern, Chi-Lon Liu, Wen-Jen Chang, Yung-Huang Chiang, Chia-Chin Chen, Yuan-Tsung Lu, Pei-Xin Su, Xuan-Ming Lin, Shih-Hung Lin, Ko-Wei Department of Materials Science and Engineering National Chung Hsing University Taichung40227 Taiwan Department of Materials Science and Engineering I-Shou University Kaohsiung84001 Taiwan Bachelor Program in Industrial Technology National Yunlin University of Science and Technology 123 University Road Section 3 Yunlin Douliou64002 Taiwan Department of Mechanical Engineering National Kaohsiung University of Science and Technology Kaohsiung80778 Taiwan Graduate School of Materials Science National Yunlin University of Science and Technology 123 University Road Section 3 Yunlin Douliou64002 Taiwan Department of Electronic Engineering National Yunlin University of Science and Technology 123 University Road Section 3 Yunlin Douliou64002 Taiwan

Co60Fe20Sm20 thin films were deposited onto glass substrates in a high vacuum setting. The films varied in thickness from 10 to 50 nm and underwent annealing processes at different temperatures: room temperature (RT), 100, 200, and 300 °C. Our analysis encompassed structural, magnetic, electrical, nanomechanical, adhesive, and optical properties in relation to film thickness and annealing temperature. X-ray diffraction (XRD) analysis did not reveal characteristic peaks in Co60Fe20Sm20 thin films due to insufficient growth-driving forces. Electrical measurements indicated reduced resistivity and sheet resistance with increasing film thickness and higher annealing temperatures, owing to hindered current-carrier transport resulting from the amorphous structure. Atomic force microscope (AFM) analysis showed a decrease in surface roughness with increased thickness and annealing temperature. The low-frequency alternating current magnetic susceptibility (χac) values increased with film thickness and annealing temperature. Nanoindentation analysis demonstrated reduced film hardness and Young’s modulus with thicker films. Contact angle measurements suggested a hydrophilic film. Surface energy increased with greater film thickness, particularly in annealed films, indicating a decrease in contact angle contributing to this increase. Transmittance measurements have revealed intensified absorption and reduced transmittance with thicker films. In summary, the surface roughness of CoFeSm films at different annealing temperatures significantly influenced their magnetic, electrical, adhesive, and optical properties. A smoother surface reduced the pinning effect on the domain walls, enhancing the χac value. Additionally, diminished surface roughness led to a lower contact angle and higher surface energy. Additionally, smoother surfaces exhibited higher carrier conductivity, resulting in reduced electrical resistance. The optical transparency decreased due to the smoother surface of C

关键词： Thin films

来源：评论

学校读者我要写书评

暂无评论

Microstructural Effect on the Corrosion Behavior of N- and P-Type Bismuth Tellurides Fabricated by Induction Melting

SSRN

引用

SSRN 2023年

作者： El-Makaty, Farah M. Nawaz, Muddasir Shakoor, R. Abdul Hammuda, Abdelmagid Youssef, Khaled M. Mechanical and Industrial Engineering Department Qatar University Doha2713 Qatar Qatar University Doha2713 Qatar Materials Science and Technology Graduate Program College of Arts and Sciences Qatar University Doha2713 Qatar

Numerous efforts have been made to understand and enhance the thermoelectric properties of bismuth telluride alloys. However, limited studies have been reported to investigate the corrosion behavior of these alloys and their suitability for industrial applications. This paper examines the corrosion behavior of three different bismuth telluride alloys prepared by induction melting: pristine Bi2Te3, n-type Bi2Te2.55Se0.45, and p-type Bi0.6Sb1.4Te3. The electrochemical response of the samples is tested in 3.5 wt.% NaCl solution at room temperature. Potentiodynamic polarization curves (Tafel plots) revealed that the n-type sample formed a passive layer compared to the pristine and the p-type samples, which showed pitting corrosion. The different trends observed in the samples were related to their evolved microstructures, where fingerprint-like features in the pristine and the p-type samples showed high susceptibility to pitting corrosion. In contrast, a unique needle-like microstructure of the n-type samples acted as nucleation sites for passive layer formation causing higher corrosion resistance in this sample. © 2023, The Authors. All rights reserved.

关键词： Microstructure

来源：评论

学校读者我要写书评

暂无评论

In-situ synthesis and characterization of lightweight steel matrix composites reinforced by TiB2

Journal of Alloys and Metallurgical Systems

引用

Journal of Alloys and Metallurgical Systems 2024年 7卷

作者： Vidilli, André L. Otani, Lucas B. Koga, Guilherme Y. Amigó, Vicente Bolfarini, Claudemiro Federal University of São Carlos Graduate Program in Materials Science and Engineering Rodovia Washington Luís km 235 SP São Carlos13565-905 Brazil Valencia Spain Rodovia Washington Luís km 235 SP São Carlos13565-905 Brazil

This study aimed to synthesize lightweight steels in situ reinforced with 5 % and 10 vol% of TiB2 and evaluate the microstructural, physical, and mechanical properties. The Fe-(15;20 wt%)Mn-3 wt%Al-0.1 wt%C with 5 and 10 vol% of TiB2 were produced by spray forming followed by hot rolling and annealing. The concept of varying the manganese content was to assess the influence of the matrix constitution on the composite properties. The findings pointed to a direct correlation between the manganese content and the size and morphology of the TiB2 particles. The presence of the ceramic particles re-established the modulus of elasticity above 200 GPa only for composites with a predominantly ferritic matrix. The composites with a matrix composed mostly of austenite showed no gains in ductility during the tensile tests despite the activation of the TWIP effect. However, their wear behavior stands out positively. © 2024 The Authors

关键词： Tensile testing

来源：评论

学校读者我要写书评

暂无评论

New insight into pyrrolic-N site effect towards the first NIR window absorption of pyrrolic-N-rich carbon dots

引用

Nano Research 2023年第4期16卷 6001-6009页

作者： Fitri Aulia Permatasari Reza Umami Citra Deliana Dewi Sundari Tirta Rona Mayangsari Atthar Luqman Ivansyah Fahdzi Muttaqien Takashi Ogi Ferry Iskandar Department of Physics Faculty Mathematics and Natural SciencesInstitut Teknologi BandungJalan Ganesha 10BandungWest Java 40132Indonesia Collaboration Research Center for Advanced Energy Materials National Research and Innovation Agency-Institut Teknologi BandungJalan Ganesha 10BandungWest Java 40132Indonesia Department of Chemistry Faculty of Mathematics and Natural SciencesInstitut Teknologi BandungJl.Ganesha 10BandungWest Java 40132Indonesia Department of Chemistry Education UIN Sunan Gunung Djati BandungJl.CimincrangBandungWest Java 40292Indonesia Department of Chemistry Universitas PertaminaJakarta 12220Indonesia Master Program in Computational Science Faculty of Mathematics and Natural SciencesInstitut Teknologi BandungJl.Ganesha 10BandungWest Java 40132Indonesia Instrumentation and Computational Physics Research Group Faculty of Mathematics and Natural SciencesInstitut Teknologi BandungJl.Ganesha 10Bandung 40132Indonesia Research Center for Nanoscience and Nanotechnology Institut Teknologi BandungJalan Ganesha 10BandungWest Java 40132Indonesia Chemical Engineering Program Department of Advanced Science and EngineeringGraduate School of Advanced Science and EngineeringHiroshima UniversityHigashi-Hiroshima 739-8527Japan

Controlled C-N configurations,i.e.,pyrrolic-N,pyridinic-N,and graphitic-N,are promising strategies to tailor the carbon dots’(CDs)optical properties into the first near infrared(NIR)window(650-900 nm),a responsive range for biomedical ***,a deep understanding of the role of the C-N configuration in the CDs’properties is still challenging and thoughtprovoking owing to their complex ***,an underlying pyrrolic-N concentration and position effect on the pyrrolic-N-rich CDs’absorption was comprehensively elucidated based on the integrated experimental and computational *** assynthesized pyrrolic-N-rich CDs exhibit a first NIR window absorption centered at 650 nm with high photothermal ***-N concentrations from 1.4%to 11.3%and positions(edge and mid-site)were systematically investigated.A mid-site pyrrolic-N was subsequently generated after the pyrrolic-N concentration more than 10%.Edge-site pyrrolic-N induces a frontier orbital hybridization,reducing bandgap energy,while mid-site pyrrolic-N plays a critical role in inducing a first NIR window absorption owing to their high charge ***,pyrrolic-N-rich CDs inherit a bowl-like topological feature,elevating the CDs’layer thickness as much as 0.71 *** study shed light on the design and optimization of pyrrolic-N on CDs for the first NIR window responsive materials in any biomedical application.

关键词： absorption carbon dots charge transfer first near infrared(NIR)window frontier orbital hybridization mid-site pyrrolic-N

来源：评论

学校读者我要写书评

暂无评论

Terahertz phonon polariton concentrator based on perovskite oxides

Terahertz phonon polariton concentrator based on perovskite ...

引用

Conference on Lasers and Electro-Optics (CLEO)

作者： Rui Xu Tong Lin Jiaming Luo Xiaotong Chen Elizabeth R. Blackert Alyssa R. Moon Khalil M. JeBailey Hanyu Zhu Department of Materials Science and Nano Engineering Rice University Houston U.S.A. Applied Physics Graduate Program Rice University Houston U.S.A. Nanotechnology Research Experience for Undergraduates (Nano REU) Program Rice University Houston U.S.A.

We report the experimental demonstration of surface phonon-polaritonic devices in a broad spectral range of 7-13 THz based on SrTiO 3 . We designed planar ultrafast concentrators that amplifies transient electric fiel... 详细信息

ISBN: (纸本)9781957171258

关键词： Concentrators Electric fields Fast Fourier transforms Field enhancement Fused silica Second harmonic generation

来源：评论

学校读者我要写书评

暂无评论

Multiplex Magnetic Biosensor Microarrays Facilitate Personalized Vaccination Schedules for Sars-Cov-2 Variants

SSRN

引用

SSRN 2024年

作者： Um, Hyun-Kyung Kim, Songeun Wang, Shan X. Lee, Jung-Rok Department of Mechanical and Biomedical Engineering Ewha Womans University Seoul03760 Korea Republic of Graduate Program in Smart Factory Ewha Womans University Seoul03760 Korea Republic of Department of Materials Science and Engineering Stanford University Stanford CA94305 United States Department of Electrical Engineering Stanford University Stanford CA94305 United States

Rapid, sensitive, multiplexed antibody detection technologies are essential for assessing vaccine efficacy and recipient immunity against viruses. As severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants continue to emerge, and the fact that novel viruses may pose potential threats in the near future, personalized vaccines can be precisely tailored to an individual’s measured immunity to help mitigate the symptoms of infection and viral spread. Here, we present giant magnetoresistive (GMR) biosensor microarrays for the quantitative multiplexed detection of antibodies against SARS-CoV-2 variants. The multiplexed GMR biosensor microarrays demonstrated high sensitivity, comparable to that of the single-plex enzyme-linked immunosorbent assay, enabling multiplexed measurements using blood obtained from finger pricks. Additionally, the GMR biosensor microarrays demonstrated compatibility with clinical samples and could detect variant-specific antibodies in serum, allowing for the assessment of current immunity status. Notably, an increased concentration of antibodies against the Omicron variant was clearly observed two weeks after receiving an Omicron-based booster vaccination. These results indicate that GMR biosensor microarrays offer a practical point-of-care tool for monitoring humoral immunity and guiding personalized vaccination schedules, thereby supporting immunity management against SARS-CoV-2 and future viral threats. © 2024, The Authors. All rights reserved.

关键词： Giant magnetoresistance

来源：评论

学校读者我要写书评

暂无评论

Measurement of Water Diffusion Coefficient in Cross-Linked Gelatins Using the Terahertz Time-Domain Spectroscopy Technique

Measurement of Water Diffusion Coefficient in Cross-Linked G...

引用

2024 Conference on Lasers and Electro-Optics, CLEO 2024

作者： Walden, D. Chakraborty, D. Cheng, J. Straksys, A. Stirke, A. Melo, W.C.M.A. Jukna, A. Komissarov, I. Sobolewski, Roman Department of Physics and Astronomy University of Rochester RochesterNY14627 United States Laboratory for Laser Energetics University of Rochester RochesterNY14623-1299 United States Materials Science Graduate Program University of Rochester RochesterNY14627 United States State Research Institute Center for Physical Sciences & Technology Vilnius Lithuania Department of Physics Vilnius Gediminas Technical University Vilnius Lithuania Department of Electrical and Computer Engineering University of Rochester RochesterNY14627 United States

A novel method has been developed to evaluate the water diffusion dynamics in gelatin-based gels, based on transient terahertz time-domain spectroscopy measurements. Such gels are widely used models for human skin. &#... 详细信息

ISBN: (纸本)9781957171395

关键词： Transient analysis

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：