检索结果-内蒙古大学图书馆

RACER - A DESIGN FOR MAINTAINABILITY

NAVAL ENGINEERS JOURNAL 1985年第5期97卷 139-146页

作者： DONOVAN, MR MATTSON, WS Michael R. Donovanis a 1974 graduate of the United States Naval Academy where he received his undergraduate degree in naval architecture. In 1975 he received a master of science degree in naval architecture and marine engineering from the Massachusetts Institute of Technology. After completing the Navy's nuclear power training program he served as machinery division officer in USSBainbridge (CGN-25) and chemistry and radiological controls assistant in USSLong Beach (CGN-9). He successfully completed the Navy's surface warfare officer qualification and passed the nuclear engineer's examination administered by Naval Reactors. He was then assigned to the Ship Design and Engineering Directorate (SEA-05) Naval Sea Systems Command as head systems engineer on the DDG-51 ship design project where he received the Navy Commendation Medal for outstanding performance. He is currently with Solar Turbines Incorporated as manager ship integration and integrated logistic support for the Rankine cycle energy recovery (RACER) system. Mr. Donovan has lectured at Virginia Polytechnic Institute teaching marine engineering and has given presentations on ship design at various symposiums and section meetings for both ASNE and SNAME. He has been a member of ASNE and SNAME since 1972 and is registered as a professional engineer in California and Virginia. Wayne S. Mattsonreceived his B.S. degree in mechanical engineering from Western New England College in 1972. Following graduation he attended Naval Officer Candidate School and was subsequently assigned as a project officer to COMOPTEVFOR where he was responsible for technical and operational test plans their execution and final equipment appraisal. Following a tour as engineering officer aboard the USSNespelen (AOG-55) he was assigned as commissioning MPA aboard the USSElliot (DD-967) the fifthSpruanceclass destroyer. For the past six years he has been employed by Solar Turbines Incorporated in program management within the advanced development department. He is currently

There is a great deal of emphasis currently in the Navy on the issues of reliability and maintainability. If a system or component is out of commission, it obviously cannot perform its mission. Thus, systems and components must be reliable, with low failure rates, and maintainable, with short repair times when the system does become inoperable. To be effective, these attributes must be incorporated into new ship systems early in the design stage. The Rankine cycle energy recovery (RACER) system is a heat recovery steam cycle designed to recover energy from the exhaust of an LM2500 gas turbine for augmentation of a ship's propulsion system. The RACER system provides several advantages to a gas turbine powered ship, one of which is improved fuel efficiency for significant annual fuel savings. This saving does not come free, however, since, in general, any additional system installed in the ship will have some maintenance requirements. In keeping with the Navy's current emphasis, a key philosophy in the design of the RACER system has been to minimize this maintenance burden. After a brief description of the RACER system and its design philosophy, the techniques being used during the design phase to minimize the maintenance burden on the fleet are presented. Trade-off studies concerning acquisition versus life-cycle costs, including fuel and maintenance costs, are discussed. Innovations incorporated into this state-of-the-art system are reviewed with an emphasis on design for affordability.

关键词： COGENERATION PLANTS

来源：评论

学校读者我要写书评

暂无评论

AIR-CUSHION LANDING CRAFT NAVIGATION

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 248-260页

作者： GRAHAM, HR KIM, JC BAND, EGU FOWLER, AW Herbert R. Graham:received his degrees of B.S. in 1951 and M.S. in 1958 in aeronautical engineering from the Massachusetts Institute of Technology and the California Institute of Technology respectively. He also attended the Harvard Graduate School of Business Administration. He is presently a task manager at TRW Inc. McLean Virginia responsible for landing craft air cushion (LCAC) engineering support. Since joining TRW in 1967 he has had several technical project management and system engineering responsibilities in amphibious ships transportation and energy. He was responsible for the preliminary engineering design and cost estimates for tracked air cushion vehicles (TACVs). He has been active in several professional societies including ASNE and served as vice-chairman Los Angeles Section American Institute of Aeronautics and Astronautics. John C. Kim:received his degrees of B.S. in electrical engineering Tri-State University 1959 M.S. in electrical engineering Michigan State University 1960 and Ph.D. in electrical engineering Michigan State University. He is presently a senior staff engineer with TRW Inc. McLean Virginia where his technical experience has included communications system engineering and navigation system analysis. Since joining TRW in 1969 he has held numerous positions including section head project manager and department manager. His previous employment includes E-Systems/Melpar Division and Honeywell. Dr. Kim has been active in the IEEE Washington Chapter activities which included secretary vice-chairman and chairman of Systems Science and Cybernetics Group. Edward G.U. Band:received a B.S. degree in mechnical engineering in 1946 and a D.I.C in aeronautical engineering in 1947 at the City and Guilds College of London University. In 1951 he received an M.S. degree from Stevens Institute of Technology in fluid dynamics. After a career in the aircraft industry in England Canada and the U.S.A. he spent several years teaching in Chile and at Webb Institute of Naval Archi

Air cushion vehicles (ACVs) have operated successfully on commercial routes for about twenty years. The routes are normally quite short; the craft are equipped with radar and radio navigation aids and maintain continuous contact with their terminals. Navigation of these craft, therefore, does not present any unusual difficulty. The introduction of air cushion vehicles into military service, however, can present a very different picture, especially when external navigation aids are not available and the craft must navigate by dead reckoning. This paper considers the problems involved when navigating a high-speed air cushion vehicle by dead reckoning in conditions of poor visibility. A method is presented to assess the ACV's navigational capability under these circumstances. A figure of merit is used to determine the sensitivity of factors which affect navigation such as the range of visibility, point-to-point distance, speed, turning radius and accuracy of onboard equipment. The method provides simplistic but adequate answers and can be used effectively to compare the-capability and cost of alternative navigation concepts.

关键词： AIR CUSHION VEHICLES

来源：评论

学校读者我要写书评

暂无评论

FFG 7 CLASS FIN STABILIZER SYSTEM

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 62-68页

作者： DONAHUE, JC MCMAHON, EJ NELSON, LW Commander John C. Donahue USN:is the Deputy Technical Director for NAVSEA PMS 399 the FFG 7 class Acquisition Project Office. In addition he is the FFG 7 class Fin Stabilizer System Program Manager. Cdr. Donahue is an Engineering Duty Officer and Surface Warfare Officer who holds a BS in marine engineering from the California Maritime Academy a BS in business administration and an MS in material management from the Naval Postgraduate School. He is a designated Weapons Systems Acquisition Manager. Cdr. Donahue's sea service includes three tours culminating as chief engineer in USSFarragut (DLG-6) during that ship's complex overhaul as the DLG pilot ship for the 1200 PSI improvement program. Significant shore duty includes the Philadelphia Naval Shipyard where he served as theBelknapproject officer during that ship's repair restoration and modernization following its collision with USSJohn F. Kennedy (CV-67) Assistant Sixth Fleet Maintenance Officer and the Naval Research Laboratory. Cdr. Donahue was the charter president of the ASNE Section at the Naval Postgraduate School. Edward J. McMahon:is founder and President Reliability Sciences Incorporated (RSI) and has been supporting NAVSEA on the FFG 7 Class fin stabilizer system procurement since 1977. Mr. McMahon has a BSME from New Jersey Institute of Technology and has done graduate work in electrical engineering operations research and engineering administration at New Jersey Institute of Technology Seton Hall University University of Alabama and George Washington University. He has authored and presented various papers on reliability and electrostatic discharge control and coauthored a book Electrostatic Discharge Control — Successful Methods for Microelectronics Design and Manufacturingpublished by Hayden Publishing Company 1983. Mr. McMahon is a registered Professional Engineer and listed in Who's Who 1977 1978 1982 and 1983. Louis W. Nelson:is an electrical engineer with the NAVSEA Surface Ship Control and Hydraulic System Branch where he ha

This paper discusses the new fin stabilizer system developed for the FFG 7 class ships. The paper includes: a brief history of fin stabilizers, the advantages of fin stabilizers on Navy combatants, brief theory of system operation, the approaches used in system development, and an up to date program status. This paper furthers Nelson and McCallum's paper [1] which addresses the infancy of the FFG 7 fin stabilizer system development program.

关键词：

来源：评论

学校读者我要写书评

暂无评论

ARCTIC TRAFFICABILITY program - A REVIEW

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 169-175页

作者： VOELKER, R GLEN, IF SEIBOLD, F BAYLY, I Richard Voelker:is Vice President of ARCTEC Incorporated a firm specializing in cold regions technology. He has been responsible for the management of thePolarClass Traffic-ability Program since its inception and annually participates in the field data collection in the Arctic. His prior experience includes positions with the U.S. Coast Guard in the icebreaker design project the Military Sealift Command and at Newport News Shipbuilding. He is a graduate of N. Y.S. Maritime College and has a MS degree from the University of Michigan. I.F. Glen:received his professional degrees in naval architecture from the Royal Naval Engineering College Manadon Plymouth and RN College Greenwich London entering the Royal Corps of Naval Constructors in 1967. After serving as a Constructor Lieutenant in the Royal Navy's Far East Fleet for a short period he joined the Polaris submarine project team in Bath England in 1968. In 1971 he was seconded to the Canadian Department of National Defense in Ottawa as a Constructor Lieutenant Commander under NATO exchange arrangements where he had responsibilities initially for conventional submarines and latterly for computer aided conceptual design. He ventured to Bath England in 1974 and joined Forward Design Group. In 1975 he took a position as a civilian engineer in the Canadian Defense Department and was Head of Hull Systems Engineering from 1977 to 1979. He joined ARCTEC CANADA LIMITED in 1980 and in addition to managing ice model testing projects and full scale trials has specialized in structural response of ships to ice impact. He headed ARCTEC's Kanata Laboratory from 1981 to 1983 when he was promoted to president. Frederick Seibold:is a research program manager with the Maritime Administration's Office of Advanced Ship Development and Technology. He is responsible for the marine science program which includes research in the areas of ship powering structures and propeller performance and Arctic technology. Mr. Seibold has been employed by Mar Ad since 1961 having hel

This paper describes a multiyear program to make an operational assessment on the feasibility of a year-round Arctic marine transportation system to serve Alaska. Specifically, the three objectives were to: collect meteorological and ice data along potential marine routes; instrument the hull and propulsion machinery to improve design critera for ice-worthy ships; and demonstrate that ships can operate in midwinter Alaskan Arctic ice conditions. The U.S. Coast Guard's Polar class icebreakers were used to make the operational assessment by annually extending the route northward and by operating throughout the winter season. This paper reviews some of the operational and technical achievements to date, as well as plans for future Arctic deployments.

关键词：

来源：评论

学校读者我要写书评

暂无评论

SHIP ENERGY-CONSERVATION ASSIST TEAM (SECAT)

引用

NAVAL ENGINEERS JOURNAL 1984年第2期96卷 47-58页

作者： DANGEL, R BRICE, AE The Authors A. Edward Brice was born and educated in Scotland where he graduated from the James Watt Memorial College and Paisley Technical College. His earliest marine engineering experience was obtained at Scotts's Shipbuilding and Engineering Company Limited from 1952 to 1959 where he was involved in the production and design of steam and diesel machinery plants for both Naval and commercial ships. During a five year stay in Canada Mr. Brice gained diversified experience in industries other than marine such as petrochemical plants and steel mills. He moved to the U.S. in 1964 where he was the design supervisor in charge of marine engineering at NASSCO covering new construction for American President Lines AFS type ships for the U.S. Navy Project Mohole Car Ferries for the State of Washington and 17 LST's for the U.S. Navy. During the contract definition phase of the DD-963 Mr. Brice authored several portions of the technical proposal while employed by Litton industries. He was also responsible for the system and detail design including the technical management of sub-contracts for the steam propulsion plant for the LHA 1 Class ships. Mr. Brice has been active in the Washington area for the last ten years performing marine engineering projects for the U.S. Navy. His principal interest since 1974 has been in shipboard energy conservation. He assisted in the development of the NavySTMSYS program and later in the operational verification aboard FF-1074. Mr. Brice has conducted four SECA T visits aboard ships with 1200 PSI steam plants and has recently completed an at-sea visit aboard on AOR with a 600 PSI steam plant. Richard Dangel was bom in New York City. He received his Bachelor's degree from the Sloan School of Industrial Management of the Massachusetts Institute of Technology in 1955. He has also completed graduate work for a Masters in Engineering Administration at George Washington University. Since graduation he has spent 11 years in private industry with companies in the DOD engineering research

The Ship Energy Conservation Assist Team (SECAT) program was initiated in Fiscal Year (FY) 82 by the Naval Sea Systems Command (NAVSEA) to demonstrate and introduce individual Ship Commands to known energy conserving techniques without adding equipment complexity or additional maintenance burden. The principal objective is to provide each ship with an energy consumption, coupled with recommended energy conservation strategies. The technique involves both in-port and underway monitoring and introduction of energy efficient machinery plant alignments, fuel consumption curve generation, and most efficient speed curves. The program has completed visits on six combatants and enjoys the support of both the Commander, Naval Surface Forces, U.S. Atlantic Fleet (COMNAVSURFLANT) and the Commander-in-Chief, U.S. Atlantic Fleet (CINCLANT). Plans are to perform SECAT on additional DDG 2 and FF 1052/1078 Class ships and initiate SECAT on additional ship types in FY 83.

关键词：

来源：评论

学校读者我要写书评

暂无评论

RUDDER ROLL STABILIZATION FOR COAST GUARD CUTTERS AND FRIGATES

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 267-282页

作者： BAITIS, E WOOLAVER, DA BECK, TA Dr. Erich Baitis: a native of Germany came to the David W. Taylor Naval Ship Research and Development Center in 1957 as a co-operative student/trainee and received his Bachelor of Science Degree in Physics from Virginia Polytechnic Institute. As a 32-year-old naval architect in 1971 he received both the VietnamHonorServiceMedaland the Navy'sMeritoriousCivilianServiceAwardfor his eight months as liaison with the Vietnamese NAVVS ferro-cement ship program. As head of the Seakeeping and Stabilization Group of the Surface Ship Dynamics Branch his work has led to the development of a new standard Ship Motion Computer Program and the application of ship motions to ship habitability operability and survivability problems. A major area of this work has been the ship/aircraft interface which is particularly sensitive to ship motions wind and other environmental factors. Mr. Dennis A. Woolaver:has been employed as a Naval Architect at the David W. Taylor Naval Ship Research and Development Center since 1965 where his work has resulted in numerous patents. He received his Bachelor of Science Degree in Electrical Engineering from George Washington University where he also completed graduate work in Communication Theory. Additional fields of study include Computer Science and Personnel Management. Current efforts are directed toward surface ship motion mitigation data acquisition and statistical analysis. He is a member of the Society of Naval Architects and Marine Engineers. Lt. Tom A. Beck USCG: joined the UnitedStatesCoastGuardin 1966 where he trained as an Electronics Technician. He received a Bachelor of Science Degree in Electrical Engineering from Columbia University in 1978. From 1978 to 1979 he was an Electronics Project Officer at the CoastGuardElectronics Laboratory in Alexandria Virginia. Since 1980 he has been a Research and Development Project Officer in the Sensor Technology Branch of the CoastGuardsOffice of Research and Development. Lt. Beck is a member of the Institute of Electronic and Elect

The potential use of rudders as anti-roll devices has long been recognized. However, the possible interference of this secondary function of the rudder with its primary role as the steering mechanism has prevented, for many years, the development of practical rudder roll stabilizers. The practical feasibility of rudder roll stabilization has, however, in recent years been demonstrated by two systems designed and developed for operational evaluation aboard two different U.S. C oast G uard Cutters, i.e., Jarvis and Mellon of the 3,000-ton, 378-foot HAMILTON Class. The authors describe the major components of the rudder roll stabilization (RRS) system, along with the design goals and methodology as applied to these first two prototypes. In addition, a brief history of the hardware development is provided in order to show some of the lessons learned. The near flawless performance of the prototypes over the past four years of operational use in the North Pacific is documented. Results from various sea trials and reports of the ship operators are cited and discussed. The paper concludes with a discussion of the costs and benefits of roll stabilization achieved using both a modern anti-roll fin system, as well as two different performance level RRS systems. The benefits of roll stabilization are demonstrated by the relative expansion in the operational envelopes of the USS OLIVER HAZARD PERRY (FFG-7) Class. The varying levels of roll stabilization suggest that the merits of fins and RRS systems are strongly dependent on mission requirements and the environment. The demonstrated performance of the reliable RRS system offers the naval ship acquisition manager a good economical stabilization system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Coordinated control and its implementation

引用

Process Safety Progress 1982年第2期1卷 85-90页

作者： C. S. Lin T. H. Tsai J. W. Lane Tenneco Inc. Houston Texas 77001 Cheng S. Lin:was born in Taiwan and received a BS in Mechanical Engineering at Cheng Kung University. He came to the Rensselaer Polytechnic Institute in 1959 where he received a MME in Mechanical Engineering in 1962 and a PhD in Mechanical Engineering in 1966 He spent three years at West Virginia Pulp and Paper Co. in Process Control Research three years at TRW Inc. Systems Group on the Apollo program and nine years at Bonner and Moore Assoc. installing process control systems worldwide. He joined the Operations Technologies Department of Tenneco Inc. as a Consulting Engineer in June 1980. He is a US citizen and a member of IEEE. Thomas H. Tsai:is a Managing Engineer of the Operations Technologies Department of Tenneco Inc. He is a Registered Professional Engineer in the State of Calif. and is a Member of AIChE and a Senior Member of ISA. He received a BS degree in Chemical Engineering at Tunghan University of Taiwan and attended graduate school at Oklahoma State University. James W. Lane:received a BE and MS in Chemical Engineering from the University of Southern California. He is a Registered Professional Engineer in the States of Tex and Calif. and is a Member of the AIChE Senior Member of the IEEE and Senior Member of the SME. For the last seven years he has been Director of the Operations Technologies Department of Tenneco Inc. a cooperate engineering group providing expertise in advanced control technology for process control energy management and environmental monitoring systems.

来源：评论

学校读者我要写书评

暂无评论

THE FFG 7 CLASS DESIGN IMPACT BY INSURV TRIALS

引用

NAVAL ENGINEERS JOURNAL 1982年第2期94卷 87-100页

作者： WOODRUFF, RB The authorgraduated from the U.S. Naval Academy with distinction in 1964. He served initially in theUSS Davis (DD-937)as Main Propulsion Assistant attended the Naval Destroyer School and then was a member of the Pre-Commissioning Crew and Engineer Officer in theUSS Julius A. Furer (DEG-6).Selected as an Engineering Duty Officer (ED) in 1968 he had a tour in the Maintenance Department Staff of Commander Cruisr-Destroyer Force U.S. Atlantic Fleet at Newport R.I. after which he attended Massachusetts Institute of Technology for graduate studies which culminated in his receiving his M.S. degree in Mechanical Engineering and his degree of Ocean Engineer in 1972. Following graduation he was assigned to the Boston Naval Shipyard followed by two years in theUSS Puget Sound (AD-38)as Repair Officer after which he was ordered to the Norfolk Naval Shipyard as the Production Engineering Officer. Currently he is on duty in the Naval Sea Systems Command (PMS 399) where he is the Trials Officer and Hull Technical Director for theOliver Hazard Perry (FFG-7)Class Acquisition Program. Cdr. Woodruff is a qualified Surface Warfare Officer and among his military decorations holds the Naval Achievement Medal and the Vietnamese Meritorious Unit Citation Gallantry Cross. In addition to ASNE which he joined in 1967 he is a member of the U.S. Naval Institute. Two previous papers on Naval Shipyard Production presented at ASNE Day 1978 and 1979 were published in the Naval Engineers Journal Vol. 90 No. 2 (April 1978) and Vol. 91 No. 2 (April 1979). A paper on the Management of Surface Ship Maintenance was published in theNaval Engineers JournalDecember 1980.

This paper describes the impact made on the OLIVER HAZARD PERRY (FFG 7) Class design after numerous trials by the President, Board of Inspection and Survey and his Staff. In the early 1970s, faced with a Fleet of World War II Destroyers, the Navy embarked on a program to build large numbers of Frigates to perform an Ocean Escort role. This ship had three major design constraints placed on it by Chief of Naval Operations (CNO): fixed meaning, fixed displacement, and fixed cost or “designed to cost.” The purpose of this paper is to pass on some “lessons learned.” The acid test of any ship design is how well it does with the Fleet in regard to performance and reliability. How well has the “design-constrained” FFG-7 fared with 20 plus ship trials under its belt? Very well in some areas; not so well in others. Examples of the good aspects of this ship design (LM 2500 and main propulsion train, Standard Option Equipment, et cetera) as well as those which must be considered poor will be addressed. Some examples of the latter are the “breezeway” cargo doors, ship's service diesel generators, MK 92 Combat Systems, decontamination stations, and topside corrosion control. In many cases INSURV caused design changes to be made that were sorely needed; in other cases, changes were made (or not made) over issues that had little or no impact on making this ship more ready for war. A brief examination of the Naval Sea Systems Command (NAVSEA) surface ship design policies is made from the point of view of the Trials Officer (the Author) who rode most of the trials with PRESINSURV. Some of the issues addressed: •Improved NAVSEA corporate memory between ship designs. •Longer Acceptance Trial for Lead Ship. •Early deployment of Lead Ship without TECHREPS. •Improved NAVSEA/INSURV/CNO communication on Trial/Technical Issues and insertion of INSURV early into the design process. •Need for NAVSEA to stand up and say “no” to costly design changes that do little to make for a better warship.

关键词：

来源：评论

学校读者我要写书评

暂无评论

TECHNOLOGICAL ADVANCES IN AIRCRAFT CARRIER DESIGN

引用

NAVAL ENGINEERS JOURNAL 1980年第5期92卷 71-85页

作者： REIN, RJ RYAN, JC USN (RET.) Cdr. Robert J. Rein USN (Ret.)currently is the Director of Naval Support Systems for the Columbia Research Corporation Washington D. C. At the time this paper was presented he was on active duty in the U.S. Navy serving as the Ship Design Manager for the CVV Naval Sea Systems Command. Prior to that his duty assignments included Deputy Program Manager for the Sea Control Ship Assistant Ship Material Officer. Staff of Commander Naval Air Force U.S. Pacific Fleet and Type Desk Officer for Cruisers/Destroyers and New Construction (CG 30) at the former Hunter's Point Naval Shipyard. He is a graduate of General Motors Institute an accredited private college sponsored by the General Motors Corporation: the U.S. Naval Postgraduate School Monterey. Calif.: and the Defense Systems Management College. Fort Belvoir. Va. Additionally. he has had extensive postgraduate study in Systems Management at The George Washington University. Cdr. Rein is extremely active in his support of professional engineering societies and as a member of ASNE since 1964 has been responsible for the founding of ASNE Local Sections on the west coast and presently is serving as the Society's National Assistant Secretary-Treasurer. In addition he also was the creator and coordinator for the highly successful. Society sponsored Symposium “Aircraft Carriers — Present and Future.”which was held in October 1976 at the U.S. Grant Hotel. San Diego. Calif. and was the first such Symposium jointly sponsored by an Operating Fleet command and a professional society. Mr. J. Christopher Ryanreceived his B.S. degree in Naval Architecture and Marine Engineering from Webb Institute of Naval Architecture in 1967 and his M.S. degree in Naval Architecture from Massachusetts Institute of Technology in 1969. His initial work experience was at Litton Ship Systems where he was associated primarily with the general arrangements development of the DD 963 Class design. Subsequently. he was employed at the former Naval Ship Engineering Center with work as

Since the signing of the Contract Design Plane for the CVN 68 (the U.S. Navy's latest Class of Aircraft Carriers) In 1963, considerable technological advances have been made in Naval Ship Design. This paper provides specific examples of how new technology has affected traditional Carrier design practices and techniques, and also indicates areas where future advanced technology will be needed. It is divided into four sections: 1) Computer Design Application; 2) Total Ship Energy Conservation Analysis; 3) Advances in Structural Design; and 4) Impact of V/STOL Aircraft. The increased use of the computer to define ship characteristics in the initial stage of ship design is discussed, followed by a report on efforts to include energy conservation as an integral part of the design process. The energy conservation approach uses traditional analytical techniques to develop innovative design configurations that will achieve energy savings. Of the many advances in Carrier structural design, two specific examples are given: 1) Elimination of the infamous “knee-knockers” (high sills in passageway openings) common to Gallery Deck structure, and 2) Successful attempts at reducing the thickness of aircraft elevator platforms. The paper concludes by pointing out some possible challenges facing the ship designer and some of the technology already created by the expected introduction of advanced design Vertical/Short Takeoff and Landing (V/STOL) aircraft.

关键词：

来源：评论

学校读者我要写书评

暂无评论

MK-92 FIRE-CONTROL SYSTEM

引用

NAVAL ENGINEERS JOURNAL 1979年第4期91卷 69-76页

作者： RYAN, FN BERLIN, J Mr. Floyd N. Ryan graduated from Frostburg State College and has performed graduate studies in Technology of Management at American University and University of Southern California. He is presently Executive Director of the Surface Missile Systems Sub-Group in the Naval Sea Systems Command. He was previously Deputy Project Manager of the MK-92 FCS/MK-75 Gun Project Deputy Systems Engineering Manager in the AEGIS Project and Surface Missile Systems Branch Head in the Naval Ordnance Systems Command. His earlier experience with the Department of the Navy included the Engineering Interface Management Office in the Bureau of Ships the Foreign Ship Systems Engineering Office and Switching Systems Design Office at RCA Service Company and he served for four years in the U.S. Navy as an Electronic Technician Petty Officer. In addition to ASNE he is a member of the Association of Scientists and Engineers and is the Executive Director (NAVSEA) for the 1978-79 term. In addition to several outstanding performance awards and citations for achievement Mr. Ryan received the Navy Meritorious Civilian Service Award for exceptional contribution to the development of the AEGIS Weapon System. Mr. Jack Berlin received his Bachelor's degree in Electrical Engineering from the City College of New York and his M.S. degree in Electrical Engineering from Columbia University. He spent eight years in the Radar and Microwave Electronics Section of the Naval Material Laboratory. Subsequently. he has had extensive experience in Radar and Fire Control Systems. This has included responsibility for the design and field evaluation of the GFCS MK 87 Radar. From 1972 to 1973 he was the Sperry Program Manager for the Fire Control System (FCS) MK 92. His current assignment is Assistant Manager for New Developments of Missile and Gun Fire Control Systems for the U.S. Navy. He is a member of the Tau Beta Pi and Eta Kappa Nu Honorary Societies.

The MK 92 Fire Control System (FCS) & a new, integrated, highly reliable and light-weight U.S. Navy Fire Control System for missile and gun control. This system, which is in production for the FFG, PCG, PGG and PHM Ship Classes, provides the detection and automation required for modern naval warfare. Search radar data & presented at a very high rate at the operator's console, a highly integrated man-machine interface. Utilization of monopulse and “track-while-scan” techniques result in multiple target tracking capability. The system console(s) offer a self-contained command and control capability and, in addition, standard digital computer channels provide the versatile interface with the ship's command and control, integrating the complete engagement process. Error cancellation techniques are employed to obtain high performance accuracy even under severe environmental conditions. The low manning requirement for both operation and maintenance is a key system attribute for all applications. Comprehensive “at-sea” evaluations, performed by the U.S. Navy, demonstrated successful system operation in all modes of surveillance, multi-target tracking and simultaneous missile and gun engagements. The “at-sea” performance record of the FCS MK 92 was cited by the Chief of Naval Operations to have established new standards for Naval Surface Weapons Systems.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：