检索结果-内蒙古大学图书馆

SSRN 2024年

作者： Sousa, Claudevan A. Melo, Antonio F.A.A. Silva, Nefe J.B. Silva, Tânia Patrícia Silva E. Viana, Bartolomeu C. Santos, Francisco Eroni P. Garcia, Hans Department of Physics UFPI - Universidade Federal do Piauí PI Teresina64049-550 Brazil Materials Engineering Graduate Program Federal Institute of Education Science and Technology of Piauí Central Campus PI Teresina64000-040 Brazil Interdisciplinary Laboratory for Advanced Materials BioMatLab group Materials Science & Engineering Graduate Program UFPI - Universidade Federal do Piauí PI Teresina64049-550 Brazil

In this work, we reported experimental investigations on third-order optical properties of aqueous colloidal dispersions of silver nanocubes (Ag-NCs) and Ag-Au hollow nanostructures. The hollow bimetallic are nanoboxes, that were synthesized by galvanic substitution using silver nanocubes as templates, inserting silver with gold in molar ratios of 1.5 and 3.0 mL. This process adjusted tuning the Surface Plasmon Resonance (SPR) compared to the original Ag-NCs nanocubes. Femtosecond Z-scan measurements performed at 1040 nm, 350fs and laser intensities from 99.7 - 279 GW/cm2 shows negative nonlinear refraction for both nanocube and nanoboxes colloids, attributed to hot electron generation. Solvent effects are simultaneously suppressed of the nanostructures. On the other hand, the non-linear absorption observed for bimetallic nanoboxes shows the presence of saturated absorption (SA), but the Ag-NCs do not show a non-linear absorption signal. Therefore, our experimental results provide a reliable reference for the application of these bimetallic nanostructures as active media in nonlinear photonic devices. © 2024, The Authors. All rights reserved.

关键词： Surface plasmon resonance

来源：评论

学校读者我要写书评

暂无评论

DRYING OF REFRACTORY CASTABLES - HOW COMPLEX THE MODELLING NEEDS TO BE? A NUMERICAL AND EXPERIMENTAL STUDY 17

DRYING OF REFRACTORY CASTABLES - HOW COMPLEX THE MODELLING N...

引用

17th Unified International Technical Conference on Refractories, UNITECR 2022

作者： Moreira, M.H. Pont, S. Dal Ausas, R.F. Cunha, T.M. Luz, A.P. Pandolfelli, V.C. Federal University of Sao Carlos Graduate Program in Materials Science and Engineering SP Sao Carlos Brazil CNRS Grenoble INP 3SR Université Grenoble Alpes Grenoble38000 France Institute of Mathematical and Computer Sciences University of São Paulo SP São Carlos13566-590 Brazil

Calcium aluminate cement (CAC)bonded castables have numerous benefits when compared to monolithic refractories. Their main drawback is their long initial heating, when the physical and chemically-bonded water are released. If the mass flux of water to the ambient is lower than the vapor generation, the gas pressure can increase well above the material's strength resulting in cracks and spalling of the ceramic lining. In order to avoid this, optimized heat up curves are needed, and one promising methodology by using numerical models. Most of these calculations are based on tools used for simulating Portland cement concrete structures on fire and they vary both in complexity and their basic assumptions. Thus, the main question that remains is how complex such models need to be in order to capture the fundamental aspects of this phenomenon. The present work aimed to solve this issue by implementing multiple numerical tools reported in the literature with distinct complexity levels and fundamental assumptions and by also conducting neutron tomography tests on a CAC-bonded castable. It was possible to see that the pressure values predicted by such methodologies are equivalent and the water content predicted is qualitatively similar within the models and with the experimental values, indicating that the simplest approach might be used for predicting the castables' drying. © 2022 Unified International Technical Conference on Refractories, UNITECR 2022 - Proceedings. All rights reserved.

关键词： Portland cement

来源：评论

学校读者我要写书评

暂无评论

Photonic crystal defects with increased surface area for improved refractive index sensing

Photonic crystal defects with increased surface area for imp...

引用

Conference on Lasers and Electro-Optics

作者： Kang, Christopher Phare, Christopher Weiss, Sharon M. Vlasov, Yurii A. Assefa, Solomon Interdisciplinary Graduate Program in Materials Science Vanderbilt University Nashville TN 37235 United States Department of Physics and Astronomy Vanderbilt University Nashville TN 37235 United States Department of Electrical Engineering and Computer Science Vanderbilt University 37235 United States IBM. T.J. Watson Research Center Yorktown Heights NY 10536 United States

Photonic crystal cavities with tunable surface area via multiple-hole defects were investigated for increased resonance wavelength shins upon exposure to variable-index analytes. Sensitivity was improved by 10% compar... 详细信息

ISBN: (纸本)9781557528902

关键词： Surface defects

来源：评论

学校读者我要写书评

暂无评论

Chitosan for biofunctionalization of microsystems

Chitosan for biofunctionalization of microsystems

引用

2006 IEEE/NLM Life science Systems and Applications Workshop, LiSA 2006

作者： Koev, Stephan T. Powers, Michael A. Badilita, Vlad Yi, Hyunmin Bentley, William E. Payne, Gregory F. Rubloff, Gary W. Ghodssi, Reza Department of Electrical and Computer Engineering University of Maryland College Park MD 20742 Department of Materials Science and Engineering University of Maryland College Park MD 20742 Department of Chemical Engineering University of Maryland College Park MD 20742 University of Maryland College Park MD 20742 University of Maryland College Park MD 20742 Bioengineering Graduate Program University of Maryland College Park MD 20742

ISBN: (纸本)1424402786

We present the use of the polysaccharide chitosan for immobilizing biomolecules on microfabricated device surfaces. The main advantages of chitosan are its abundance of primary amine groups and its ability to be electrodeposited. Biomolecules are easily attached to chitosan's amines by standard glutaraldehyde chemistry. The electrodeposition of chitosan allows accurate spatial and temporal control of biomolecule placement. We have demonstrated this biofunctionalization method for two different BioMEMS devices: a biophotonic sensor and a micromechanical biosensor. We have successfully assembled probe DNA on each of them and detected hybridization with target DNA as a demonstration of sensor operation. Here, we briefly present the fabrication procedure and testing results for both of these BioMEMS sensing devices. © 2006 IEEE.

关键词： Microsystems

来源：评论

学校读者我要写书评

暂无评论

Picosecond optical-to-x-ray (Cd,Mg)Te radiation detectors

Picosecond optical-to-x-ray (Cd,Mg)Te radiation detectors

引用

2023 Conference on Lasers and Electro-Optics, CLEO 2023

作者： Cheng, J. Komissarov, I. Chen, G. Chakraborty, D. Kutcher, S. Chen, H. Trivedi, S. Sobolewski, Roman Materials Science Graduate Program University of Rochester RochesterNY14627 United States Laboratory for Laser Energetics University of Rochester RochesterNY14623 United States Department of Electrical and Computer Engineering University of Rochester RochesterNY14627 United States Brimrose Technology Corp SparksMD21152 United States

We developed a dual optical/x-ray ultrafast photodetector based on in-house grown Cdo * Mg0.03Te single crystals. The detector is characterized by ~200 ps full-width-at-half-maximum, readout-electronics limited photor... 详细信息

ISBN: (纸本)9781957171258

关键词： X ray detectors

来源：评论

学校读者我要写书评

暂无评论

DIRECT OBSERVATION OF DRYING BY NEUTRON AND X-RAY TOMOGRAPHY ANALYSIS 17

DIRECT OBSERVATION OF DRYING BY NEUTRON AND X-RAY TOMOGRAPHY...

引用

17th Unified International Technical Conference on Refractories, UNITECR 2022

作者： Moreira, M.H. Dal Pont, S. Tengattini, A. Luz, A.P. Cunha, T.M. Ausas, R.F. Pandolfelli, V.C. Federal University of Sao Carlos Graduate Program in Materials Science and Engineering SP Sao Carlos Brazil 3SR Université Grenoble Alpes Grenoble France Large Scale Structures Institut Laue-Langevin Grenoble France Institute of Mathematical and Computer Sciences University of São Paulo São Carlos Brazil

The drying of refractory monolithics is one of the main drawbacks of this class of materials due to its implication on the production halt of many industrial equipment. This is especially true for calcium aluminate cement (CAC)-bonded castables, where the vapor derived from the unreacted water and dehydration reactions can pressurize yielding cracks and explosions of the ceramic lining. Numerous advances on additives have been made to increase these materials' resistance to explosive spalling, however, the fundamentals of the physical phenomena that yields such a problem remain an open issue. For years, the techniques used to study this process were limited to indirect tests, such as the thermogravimetric analysis or the pressure and temperature measurements of samples being unidirectionally heated. Recently, direct techniques such as nuclear magnetic resonance and X-ray tomography were applied in the context of regular concrete on fire scenarios. The current work presents preliminary results of neutron tomography applied to monitoring the drying of refractory castables. The overall behavior of the castable was qualitatively similar to those observed for regular concrete, and the results provide information that can be successfully applied on numerical simulations of larger pieces with dimensions closer to the industrial ones, overcoming the main drawback of such techniques, their small sample dimensions. © 2022 Unified International Technical Conference on Refractories, UNITECR 2022 - Proceedings. All rights reserved.

关键词： Drying

来源：评论

学校读者我要写书评

暂无评论

Low Threshold Plasmonic Lattice Laser Based on CsPbBr3 Quantum Dots with Directional Emission

Low Threshold Plasmonic Lattice Laser Based on CsPbBr3 Quant...

引用

Pacific Rim Conference on Lasers and Electro-Optics (CLEO/Pacific Rim)

作者： Di Xing Cheng-Chieh Lin Ya-Lun Ho Yang-Chun Lee Mu-Hsin Chen Bo-Wei Lin Chun-Wei Chen Jean-Jacques Delaunay School of Engineering The University of Tokyo Tokyo Japan International Graduate Program of Molecular Science and Technology (NTU-MST) National Taiwan University and Academia Sinica Taipei Taiwan Department of Materials Science and Engineering National Taiwan University Taipei Taiwan Molecular Science and Technology Program Taiwan International Graduate Program (TIGP) Academia Sinica Taipei Taiwan Center of Atomic Initiative for New Materials (AI-MAT) National Taiwan University Taipei Taiwan

Metallic nanoparticles array is served as a promising way to realize on-chip lasers. To achieve high-performance lasers, efficient gain media are also critical. Here, we present a pressure-assisted process for CsPbBr3...

关键词：

来源：评论

学校读者我要写书评

暂无评论

Reduced graphene oxide membrane as supporting film for high-resolution cryo-EM

引用

Biophysics Reports 2021年第3期7卷 227-238页

作者： Nan Liu Liming Zheng Jie Xu Jia Wang Cuixia Hu Jun Lan Xing Zhang Jincan Zhang Kui Xu Hang Cheng Zi Yang Xin Gao Xinquan Wang Hailin Peng Yanan Chen Hong-Wei Wang Ministry of Education Key Laboratory of Protein Sciences Beijing Advanced Innovation Center for Structural BiologySchool of Life SciencesTsinghua University Tsinghua-Peking Joint Center for Life Sciences Tsinghua University Center for Nanochemistry Beijing Science and Engineering Center for NanocarbonsBeijing National Laboratory for Molecular SciencesCollege of Chemistry and Molecular EngineeringPeking University Joint Graduate Program of Peking-Tsinghua-NIBS School of Life SciencesTsinghua University Beijing Frontier Research Center for Biological Structures Tsinghua University Academy for Advanced Interdisciplinary Studies Peking University School of Materials Science and Engineering Tianjin University

Although single-particle cryogenic electron microscopy(cryo-EM) has been applied extensively for elucidating many crucial biological mechanisms at the molecular level, this technique still faces critical challenges, the major one of which is to prepare the high-quality cryo-EM specimen. Aiming to achieve a more reproducible and efficient cryo-EM specimen preparation, novel supporting films including graphene-based two-dimensional materials have been explored in recent years. Here we report a robust and simple method to fabricate EM grids coated with single-or few-layer reduced graphene oxide(RGO) membrane in large batch for high-resolution cryo-EM structural determination. The RGO membrane has decreased interlayer space and enhanced electrical conductivity in comparison to regular graphene oxide(GO) membrane. Moreover, we found that the RGO supporting film exhibited nice particle-absorption ability, thus avoiding the air–water interface problem. More importantly, we found that the RGO supporting film is particularly useful in cryo-EM reconstruction of sub-100-k Da biomolecules at near-atomic resolution, as exemplified by the study of RBD-ACE2 complex and other small protein molecules. We envision that the RGO membranes can be used as a robust graphene-based supporting film in cryo-EM specimen preparation.

关键词： 3D reconstruction Reduced graphene oxide Cryo-EM Air–water interface

来源：评论

学校读者我要写书评

暂无评论

Technology Roadmap for Flexible Sensors

引用

ACS NANO 2023年第6期17卷 5211-5295页

作者： Luo, Yifei Abidian, Mohammad Reza Ahn, Jong-Hyun Akinwande, Deji Andrews, Anne M. Antonietti, Markus Bao, Zhenan Berggren, Magnus Berkey, Christopher A. Bettinger, Christopher John Chen, Jun Chen, Peng Cheng, Wenlong Cheng, Xu Choi, Seon-Jin Chortos, Alex Dagdeviren, Canan Dauskardt, Reinhold H. Di, Chong-an Dickey, Michael D. Duan, Xiangfeng Facchetti, Antonio Fan, Zhiyong Fang, Yin Feng, Jianyou Feng, Xue Gao, Huajian Gao, Wei Gong, Xiwen Guo, Chuan Fei Guo, Xiaojun Hartel, Martin C. He, Zihan Ho, John S. Hu, Youfan Huang, Qiyao Huang, Yu Huo, Fengwei Hussain, Muhammad M. Javey, Ali Jeong, Unyong Jiang, Chen Jiang, Xingyu Kang, Jiheong Karnaushenko, Daniil Khademhosseini, Ali Kim, Dae-Hyeong Kim, Il-Doo Kireev, Dmitry Kong, Lingxuan Lee, Chengkuo Lee, Nae-Eung Lee, Pooi See Lee, Tae-Woo Li, Fengyu Li, Jinxing Liang, Cuiyuan Lim, Chwee Teck Lin, Yuanjing Lipomi, Darren J. Liu, Jia Liu, Kai Liu, Nan Liu, Ren Liu, Yuxin Liu, Yuxuan Liu, Zhiyuan Liu, Zhuangjian Loh, Xian Jun Lu, Nanshu Lv, Zhisheng Magdassi, Shlomo Malliaras, George G. Matsuhisa, Naoji Nathan, Arokia Niu, Simiao Pan, Jieming Pang, Changhyun Pei, Qibing Peng, Huisheng Qi, Dianpeng Ren, Huaying Rogers, John A. Rowe, Aaron Schmidt, Oliver G. Sekitani, Tsuyoshi Seo, Dae-Gyo Shen, Guozhen Sheng, Xing Shi, Qiongfeng Someya, Takao Song, Yanlin Stavrinidou, Eleni Su, Meng Sun, Xuemei Takei, Kuniharu Tao, Xiao-Ming Tee, Benjamin C. K. Thean, Aaron Voon-Yew Trung, Tran Quang Wan, Changjin Wang, Huiliang Wang, Joseph Wang, Ming Wang, Sihong Wang, Ting Wang, Zhong Lin Weiss, Paul S. Wen, Hanqi Xu, Sheng Xu, Tailin Yan, Hongping Yan, Xuzhou Yang, Hui Yang, Le Yang, Shuaijian Yin, Lan Yu, Cunjiang Yu, Guihua Yu, Jing Yu, Shu-Hong Yu, Xinge Zamburg, Evgeny Zhang, Haixia Zhang, Xiangyu Zhang, Xiaosheng Zhang, Xueji Zhang, Yihui Zhang, Yu Zhao, Siyuan Zhao, Xuanhe Zheng, Yuanjin Zheng, Yu-Qing Zheng, Zijian Zhou, Tao Zhu, Bowen Zhu, Ming Zhu, Rong Zhu, Yangzhi Zhu, Yong Zou, Guijin Chen, Xiaodong 08-03 Innovis Singapore 138634 Republic of Singapore Innovative Centre for Flexible Devices (iFLEX) School of Materials Science and Engineering Nanyang Technological University Singapore 639798 Singapore Department of Biomedical Engineering University of Houston Houston Texas 77024 United States School of Electrical and Electronic Engineering Yonsei University Seoul 03722 Republic of Korea Department of Electrical and Computer Engineering The University of Texas at Austin Austin Texas 78712 United States Microelectronics Research Center The University of Texas at Austin Austin Texas 78758 United States Department of Chemistry and Biochemistry California NanoSystems Institute and Department of Psychiatry and Biobehavioral Sciences Semel Institute for Neuroscience and Human Behavior and Hatos Center for Neuropharmacology University of California Los Angeles Los Angeles California 90095 United States Colloid Chemistry Department Max Planck Institute of Colloids and Interfaces 14476 Potsdam Germany Department of Chemical Engineering Stanford University Stanford California 94305 United States Laboratory of Organic Electronics Department of Science and Technology Campus Norrköping Linköping University 83 Linköping Sweden Wallenberg Initiative Materials Science for Sustainability (WISE) and Wallenberg Wood Science Center (WWSC) SE-100 44 Stockholm Sweden Department of Materials Science and Engineering Stanford University Stanford California 94301 United States Department of Biomedical Engineering and Department of Materials Science and Engineering Carnegie Mellon University Pittsburgh Pennsylvania 15213 United States Department of Bioengineering University of California Los Angeles Los Angeles California 90095 United States School of Chemistry Chemical Engineering and Biotechnology Nanyang Technological University Singapore 637457 Singapore Nanobionics Group Department of Chemical and Biological Engineering Monash University Clayton Australia 3800 Monash

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze continued...challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative

关键词： soft materials mechanics engineering flexible electronics conformable sensors bioelectronics human-machine interfaces body area sensor networks technology translation sustainable electronics

来源：评论

学校读者我要写书评

暂无评论

Al2O3-CaO macroporous ceramics containing hydrocalumite-like phases

arXiv

引用

arXiv 2020年

作者： Borges, O.H. Santos, T. Salvini, V.R. Pandolfelli, V.C. Federal University of São Carlos Graduate Program in Materials Science and Engineering Rua Jordão Borghetti 480 Sertãozinho SP14160-050 Brazil

A mechanism to explain the lower onset strengthening temperature induced by CaCO3 in alumina-based macroporous ceramics is proposed, which relies on hydrocalumite-like phase formation during processing. Close to 600 °C, such phases are decomposed to lime and mayenite (12CaO·7Al2O3), where the latter, due to its intrinsic nanoporosity and high thermal reactivity, generates bonds between the ceramic particles at ~700ºC, resulting in microstructure strengthening. Based on this premise, the authors concluded that other Ca2+ sources could act similarly. Indeed, compositions containing Ca(OH)2 or CaO showed the same effect on the onset strengthening temperature, which reinforces the proposed mechanism. The results attained indicated that macroporous insulators could be thermally treated at lower temperatures, just to acquire enough mechanical strength for installation, finishing in-situ their firing process. Besides that, lower sintering temperatures could be used to produce macroporous ceramics that would be applied in low thermal demand environments, e.g. aluminum industries. Copyright © 2020, The Authors. All rights reserved.

关键词： Sintering

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：