检索结果-内蒙古大学图书馆

A self-assembling nanoplatform for pyroptosis and ferroptosis enhanced cancer photoimmunotherapy

Light(science & Applications) 2025年第1期14卷 153-166页

作者： Zhichao Wang Yuqi Tang Quan Li Institute of Advanced Materials and School of Chemistry and Chemical Engineering Southeast UniversityNanjing211189China Materials Science Graduate Program Kent State UniversityKentOH44242USA

The microenvironment of immunosuppression and low immunogenicity of tumor cells has led to unsatisfactory therapeutic effects of the currently developed *** cell death,such as pyroptosis and ferroptosis,can efficiently boost antitumor ***,the exploration of nanoplatform for dual function inducers and combined immune activators that simultaneously trigger pyroptosis and ferroptosis remains ***,a multifunctional pH-responsive theranostic nanoplatform(M@P)is designed and constructed by self-assembly of aggregation-induced emission photosensitizer MTCN-3 and immunoadjuvant Poly(l:C),which are further encapsulated in amphiphilic *** nanoplatform is found to have the characteristics of cancer cell targeting,pH response,near-infrared fluorescence imaging,and lysosome ***,after targeting lysosomes,M@P can cause lysosome dysfunction through the generation of reactive oxygen species and heat under light irradiation,triggering pyroptosis and ferroptosis of tumor cells,achieving immunogenic cell death,and further enhancing immunotherapy through the combined effect with the immunoadjuvant Poly(I:C).The anti-tumor immunotherapy effect of M@P has been further demonstrated in in vivo antitumor experiment of 4T1 tumor-bearing mouse model with poor *** research would provide an impetus as well as a novel strategy for dual function inducers and combined immune activators enhanced photoimmunotherapy.

关键词： immunotherapy cancer aggregation

来源：评论

学校读者我要写书评

暂无评论

Flexible refractory castables based on the Al2O3-MgO-TiO2 system

引用

Ceramics International 2025年第15期51卷 20822-20829页

作者： Reitmann, B. Borges, O.H. Falsetti, L.O.Z. Pagliosa Neto, C. Pandolfelli, V.C. Federal University of São Carlos Graduate Program in Materials Science and Engineering São Carlos Brazil São Carlos Brazil RHI Magnesita Research and Development Center Contagem Brazil

Toughening by in-situ phase formation is highly desired for high-performance refractories, as it enhances their thermomechanical properties (e.g. thermal shock damage resistance). For this purpose, pseudobrookite and intermediary spinels are promising phases due to their thermal expansion mismatch, resulting in self-microcracking. Aiming to develop highly flexible refractory castables, compositions based on the Al2O3-MgO-TiO2 system were formulated with the aid of computational thermodynamics. Of the most promising compositions, five of them were experimentally produced and had their thermomechanical and physical properties assessed by X-ray diffraction, in-situ elastic modulus, thermal shock damage analysis (ΔT = 1000 °C) and scanning electron microscopy. Results pointed out that small titania contents led to a positive effect on microstructure densification, improving the mechanical performance of the refractories and generation of phases that induce microcracking upon cooling, enhancing the thermal shock damage resistance. Nevertheless, an excess of TiO2 led to extensive cracking and cohesion loss in the refractory matrix. © 2025

关键词： Microcracking

来源：评论

学校读者我要写书评

暂无评论

Collaborative actuation of liquid crystal elastomer unit cells as a function design platform

引用

science China materials 2025年第1期68卷 236-243页

作者： Jinyu Wang Hari Krishna Bisoyi Yinliang Huang Yiyi Xu Xinfang Zhang Ben Fan Tao Yang Zhiyang Liu Shuai Huang Quan Li Institute of Advanced Materials and School of Chemistry and Chemical Engineering Southeast UniversityNanjing 211189China Materials Science Graduate Program Kent State UniversityKentOH 44242US

As future soft robotic devices necessitate a level of complexity surpassing current standards,a new design approach is needed that integrates multiple systems necessary to synchronize the motions of soft actuators and the response of signals,thereby enhancing the intelligence of flexible ***,we propose a liquid crystal elastomer unit cell-based platform that organizes the cells in a group to create expandable *** unit cell behaves like a flexible module that can expand biaxially into a specific,stable,and controllable *** the unit cells in different manners results in an adaptable soft grasper,a half-adder for information processing,and a tunable phononic *** implies a high level of reconfigurability and scalability in both structures and functions by elegantly reassembling the unit *** design strategy has the potential to integrate multiple functions that traditional soft actuators cannot accommodate,providing a platform for developing intelligent soft robotics.

关键词： liquid crystal elastomer light-responsive material smart material soft actuator

来源：评论

学校读者我要写书评

暂无评论

Effect of Sn addition on electrochemical activity of ribbons of Mg-Al-Ca anode material for rechargeable magnesium batteries fabricated by rapid solidification

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2025年第1期75卷 9-13页

作者： Fukuta, Yoshitaka Kikura, Kensei Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan Graduate School of Science and Engineering University of Toyama Toyama-shi Toyama Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama Japan CHUETSU METAL WORKS CO. LTD. Nakaniikawagun Toyama Japan Saitama Industrial technology Center Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

Magnesium-based batteries are potential candidates for next-generation rechargeable batteries due to the divalent nature of magnesium cations and the natural abundance of magnesium resources. In this study, the electrochemical activity of Mg-6mass%Al-3mass%Ca anodes combined with Sn was investigated. Thin ribbons of the anode specimens were prepared by a single-roll rapid solidification method. The results showed that the electrochemical activity increased upon adding 1 mass% Sn, while it decreased for 3 mass% Sn. Based on the results of an X-ray diffraction analysis, the addition of Sn led to the formation of Mg2Sn and Ca2Sn phases, which increased the lattice distortion. Scanning electron microscopy observations indicated that these secondary phases were homogeneously distributed for 1 mass% Sn addition, while they were coarsely distributed for 3 mass% Sn. © 2025 The Japan Institute of Light Metals.

关键词： X ray diffraction analysis

来源：评论

学校读者我要写书评

暂无评论

The revolution of type I organic photosensitizers: current strategies and future directions

引用

science Bulletin 2025年第8期70卷 1203-1206页

作者： Yang, Mengyao Zhou, Luyan Zhao, Yuan-Yuan Swamy, Kunemadihalli Mathada Kotraiah Chen, Aibing Yoon, Juyoung College of Chemical and Pharmaceutical Engineering Hebei University of Science and Technology Shijiazhuang050018 China Department of Chemistry and Nanoscience Ewha Womans University Seoul03760 Korea People's Democratic Rep Graduate Program in Innovative Biomaterials Convergence Ewha Womans University Seoul03760 Korea People's Democratic Rep

来源：评论

学校读者我要写书评

暂无评论

Mo-terminated edges in two-dimensional molybdenum disulfide for site-specific hydrolysis and DNA cleavage

引用

materials Today 2025年 86卷 162-171页

作者： Wang, Cong Wu, Menghan Li, Muqing Zhao, Yingcan Zhao, Mingchuang Zhang, Yunhao Bai, Yichao Gao, Jianxiang Wang, Xiaoxia Tian, Xilin Zhang, Han Chang, Liang Zou, Xiaolong Liu, Bilu Kang, Feiyu Terrones, Mauricio Lei, Yu Institute of Materials Research Shenzhen Key Laboratory of Advanced Layered Materials for Value-added Applications Guangdong Provincial Key Laboratory of Thermal Management Engineering and Materials & Center of Double Helix Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen518055 China Institute of Materials Research & Shenzhen Geim Graphene Center Shenzhen Key Laboratory of Advanced Layered Materials for Value-added Applications Tsinghua-Berkeley Shenzhen Institute and Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen518055 China Environmental Science Program Department of Life Sciences Beijing Normal University-Hong Kong Baptist University United International College Guangdong519087 China Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen518055 China Department of Physics Department of Chemistry Department of Materials Sciences Center for 2-Dimensional and Layered Materials The Pennsylvania State University University ParkPA16802 United States International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education Institute of Microscale Optoelectronics Shenzhen University Shenzhen518060 China

The hydrolysis of DNA serves as the foundational principle for gene engineering that enable precise gene cleavage at the molecular level. This process typically occurs in biological nucleases, which exhibit nucleobase-selective and catalytic hydrolysis capabilities rarely replicated in abiotic nanomaterials. Here, we demonstrate that molybdenum-terminated (Mo-terminated) edges of molybdenum disulfide (MoS2) possess the unique ability to abstract a proton (H+) from water molecules, thereby facilitating catalytic hydrolysis reactions that cleave the phosphodiester bonds in DNA through the action of hydroxide ions. The enhanced proton absorption at Mo-terminated edges of MoS2 significantly reduces the activation energy required for the DNA hydrolysis reaction. Furthermore, the favorable interaction between the Mo-terminated edges and thymine nucleobases promotes both charge transfer and P-O bond cleavage, enabling targeted DNA hydrolysis at 'TTTTTTT' sequences under dark conditions. This discovery underscores the potential of MoS2 as a stable, efficient nanosystem for precise genetic editing, heralding advanced applications in the field of gene engineering. © 2025 The Author(s)

关键词： Activation energy

来源：评论

学校读者我要写书评

暂无评论

Basal and Edge Plane Activity of Two-Dimensional Dirac Semimetal Nite2 for Hydrogen Evolution Reaction

SSRN

引用

SSRN 2025年

作者： Cho, Suyeon Jeong, Seung Weon Kim, Jeong Hyo Lee, Seungyeon Yang, Heejun Lee, Sangheon Division of Chemical Engineering and Materials Science Graduate Program in System Health Science and Engineering Ewha Womans University Seoul03760 Korea Republic of Daejeon34141 Korea Republic of

. Nickel ditelluride (NiTe2), one of group-10 transition metal dichalcogenides, has shown intriguing surface states originating from its topological semi-metallicity. Here, we demonstrate abnormal catalytic activities at the NiTe2 surface for hydrogen evolution reaction (HER). We investigate the differences in catalytic activities at the basal and edge planes of NiTe2 using a micro-sized electrochemical reactor. The basal plane is found to be more active than the edge plane, resulting in a current density at the basal plane of NiTe2 exceeding 800 mA/cm2 with a small overpotential of -0.162 V. We conduct ab initio calculations to estimate the intrinsic catalytic activities of HER on the basal and edge planes of NiTe2. Interestingly, our calculation results suggest that the active sites at the edge plane are electrochemically more active than those at the basal plane. The discrepancy between the experimental measurements and theoretical predictions for the crystal-orientation-dependent HER activity highlights that the specialty of a topological semimetal plays a vital role in determining the HER rate for NiTe2 nanoparticle catalysts © 2025, The Authors. All rights reserved.

关键词： Hydrogen evolution reaction

来源：评论

学校读者我要写书评

暂无评论

Anomalous properties of spark plasma sintered boron nitride solids

引用

materials Today 2025年 86卷 42-51页

作者： Biswas, Abhijit Serles, Peter Alvarez, Gustavo A. Schimpf, Jesse Hache, Michel Kong, Jonathan Demingos, Pedro Guerra Yuan, Bo Pieshkov, Tymofii S. Li, Chenxi Puthirath, Anand B. Gao, Bin Gray, Tia Zhang, Xiang Murukeshan, Jishnu Vajtai, Robert Dai, Pengcheng Singh, Chandra Veer Howe, Jane Zou, Yu Martin, Lane W. Clancy, James Patrick Tian, Zhiting Filleter, Tobin Ajayan, Pulickel M. Department of Materials Science and Nanoengineering Rice University HoustonTX77005 United States Department of Mechanical & Industrial Engineering University of Toronto 5 King's College Road TorontoM5S 3G8 Canada Sibley School of Mechanical and Aerospace Engineering Cornell University IthacaNY14853 United States Department of Materials Science and Engineering University of California Berkeley94720 United States Department of Materials Science and Engineering University of Toronto 184 College St TorontoM5S 3E4 Canada Department of Physics and Astronomy McMaster University HamiltonL8S 4M1 Canada Applied Physics Graduate Program Smalley-Curl Institute Rice University HoustonTX77005 United States Department of Physics and Astronomy Rice University HoustonTX77005 United States Materials Sciences Division Lawrence Berkeley National Laboratory Berkeley94720 United States

Hexagonal boron nitride (h-BN) is a brittle ceramic with a layered structure, however, recent experiments have suggested that inter-layer structural engineering could be key to new structural and functional properties. Here we report the scalable bulk synthesis of high-density crystalline h-BN solids, by using high-temperature spark plasma sintering (SPS) of h-BN powders, which show high values of mechanical strength, ductility, dielectric constant, thermal conductivity, and exceptional neutron radiation shielding capability. Through exhaustive characterizations we reveal that SPS induces non-basal plane crystallinity, twisting of layers, and facilitates inter-grain fusion with a high degree of in-plane alignment across macroscale dimensions, resulting in near-theoretical density and improved properties. Our findings highlight the importance of material design, via new approaches such as layer twisting and interlayer interconnections, to create novel ceramics with properties that could go beyond their intrinsic limits. © 2025

关键词： Ductility

来源：评论

学校读者我要写书评

暂无评论

Thermally treated granite slurry waste as a mitigating agent for sisal fiber mineralization in fiber-cement composites

引用

International Journal of Applied Ceramic Technology 2025年

作者： Gutiérrez, Maximo A. U. da Silveira, Thamires A. Ribeiro, Felipe V. Aramburu, Arthur B. Gomes, Cristian C. Gonçalves, Margarete R. F. Delucis, Rafael A. Post-Graduate Program in Materials Science and Engineering Federal University of Pelotas Pelotas Brazil Wood Industry Engineering Federal University of Pelotas Pelotas Brazil Post-Graduate Program in Mining Metallurgical and Materials Engineering Federal University of Rio Grande do Sul Porto Alegre Brazil

This study explores the use of thermally treated granite slurry waste to mitigate the mineralization of sisal fibers in fiber-cement composites. Granite waste was thermally treated at 600°C and 900°C, and the treated materials were analyzed using X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). Sisal fibers, alkali-treated with 1.7% NaOH, were incorporated into fiber-cement composites, where 15% and 30% of the cement was replaced by treated and untreated granite. Composites with 15% of granite treated at 600°C and 900°C showed improvements in compressive strength of up to 12% and 18%, respectively, compared to the control. The flexural strength increased by 10% with 15% granite treated at 900°C. However, the untreated granite at 30% replacement increased porosity by 25% and water absorption by 18%, negatively affecting the mechanical properties. Aging tests showed a 40% loss in compressive strength, while composites with 30% granite treated at 900°C maintained their flexural strength, making them more durable. These findings highlight the potential of thermally treated granite waste to enhance the sustainability and performance of fiber-cement composites in construction. © 2025 The Author(s). International Journal of Applied Ceramic Technology published by Wiley Periodicals LLC on behalf of American Ceramics Society.

关键词： Machinability

来源：评论

学校读者我要写书评

暂无评论

Osteogenic Potential of 3D-Printed Porous Poly(lactide-co-trimethylene carbonate) Scaffolds Coated with Mg-Doped Hydroxyapatite

引用

ACS Applied materials and Interfaces 2025年第21期17卷 31411-31433页

作者： Aydin, Mehmet Serhat Nicolae, Carmen-Valentina Campodoni, Elisabetta Mohamed-Ahmed, Samih Kadousaraei, Masoumeh Jahani Yassin, Mohammed Ahmed Gjerde, Cecilie Sandri, Monica Stancu, Izabela-Cristina Rashad, Ahmad Mustafa, Kamal Center of Translational Oral Research (TOR) Department of Clinical Dentistry University of Bergen Bergen 5009 Norway Advanced Polymer Materials Group Faculty of Chemical Engineering and Biotechnologies National University of Science and Technology Politehnica Bucharest Bucharest 011061 Romania Institute of Science Technology and Sustainability for Ceramics (ISSMC-CNR) Ravenna Faenza 48018 Italy Faculty of Medical Engineering National University of Science and Technology Politehnica Bucharest Bucharest 011061 Romania Bioengineering Graduate Program University of Notre Dame Notre Dame 46556 IN United States

Extrusion-based 3D printing of thermoplastic polymers presents significant potential for bone tissue engineering. However, a key limitation is the frequent absence of filament porosity and the inherent osteoconductive properties. This study addresses these challenges by fabricating poly(lactide-co-trimethylene carbonate) (PLATMC) scaffolds with dual-scale porosity: macroporosity achieved through controlled filament spacing and microporosity introduced via NaCl leaching. The inclusion of NaCl generated rough, porous surfaces that were well-suited for dip-coating with magnesium-carbonate-doped hydroxyapatite (MgCHA), thereby imparting osteoconductive functionality. Thermal analysis revealed that salt incorporation had minimal impact on the polymer’s thermal stability. Rheological studies and computational modeling indicated that NaCl reduced the viscosity under shear, leading to enhanced printability and faster extrusion speeds. After leaching, the scaffolds exhibited approximately 34% microporosity, which significantly increased water uptake and swelling capacity, despite the roughened surfaces slightly elevating hydrophobicity. The mechanical properties of PLATMC (with nonporous filaments) and p-PLATMC (with porous filaments) scaffolds showed a modulus of elasticity of 566 ± 118 and 101 ± 20 MPa, respectively, with strain values of 178 ± 54% and 84 ± 28%. Biological evaluations highlighted the compatibility of the p-PLATMC scaffolds. Cell viability and proliferation assays confirmed sustained cellular interaction over a 14 day period. Notably, alkaline phosphatase (ALP) activity was elevated in the porous scaffolds, and the MgCHA coating significantly enhanced mineral deposition by day 28, suggesting improved osteogenic potential. In conclusion, this study presents a robust strategy for fabricating 3D-printed PLATMC scaffolds with integrated filament porosity, offering a viable platform for osteoconductive coatings in bone tissue engineering applications. © 2025 The

关键词： bone tissue engineering magnesium doped-hydroxyapatite microporosity polymeric scaffolds surface modification

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：