检索结果-内蒙古大学图书馆

Optimizing cultivation strategies and scaling up for fucoxanthin production using Pavlova sp.

Bioresource Technology 2024年 399卷 130609页

作者： Chen, Chun-Yen Liu, Ping-Yung Chang, Yu-Han Nagarajan, Dillirani Latagan, Mary Joy D. de Luna, Mark Daniel G. Chen, Jih-Heng Chang, Jo-Shu University Center for Bioscience and Biotechnology National Cheng Kung University Tainan Taiwan Department of Biotechnology and Bioindustry Sciences National Cheng Kung University Tainan701 Taiwan Department of Chemical Engineering National Cheng Kung University Tainan Taiwan Institute of Aquatic Science and Technology College of Hydrosphere Science National Kaohsiung University of Science and Technology Nanzih Campus Kaohsiung City Taiwan Energy Engineering Program National Graduate School of Engineering University of the Philippines Diliman Quezon City1101 Philippines Environmental Engineering Program National Graduate School of Engineering University of the Philippines Quezon City Diliman1101 Philippines Department of Chemical Engineering University of the Philippines Diliman Quezon City1101 Philippines Department of Chemical and Materials Engineering National Kaohsiung University of Science and Technology Kaohsiung807 Taiwan Department of Chemical and Materials Engineering Tunghai University Taichung407 Taiwan Research Center for Smart Sustainable Circular Economy Tunghai University Taichung407 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University Chung-Li Taiwan

The microalgal-based production of fucoxanthin has emerged as an imperative research endeavor due to its antioxidant, and anticancer properties. In this study, three brown marine microalgae, namely Skeletonema costatum, Chaetoceros gracilis, and Pavlova sp., were screened for fucoxanthin production. All strains displayed promising results, with Pavlova sp. exhibiting the highest fucoxanthin content (27.91 mg/g) and productivity (1.16 mg/L·day). Moreover, the influence of various cultivation parameters, such as culture media, salinity, sodium nitrate concentration, inoculum size, light intensity, and iron concentration, were investigated and optimized, resulting in a maximum fucoxanthin productivity of 7.89 mg/L·day. The investigation was further expanded to large-scale outdoor cultivation using 50 L tubular photobioreactors, illustrating the potential of Pavlova sp. and the cultivation process for future commercialization. The biomass and fucoxanthin productivity for the large-scale cultivation were 70.7 mg/L·day and 4.78 mg/L·day, respectively. Overall, the findings demonstrated considerable opportunities for fucoxanthin synthesis via microalgae cultivation and processing. © 2024 Elsevier Ltd

关键词： Microalgae

来源：评论

学校读者我要写书评

暂无评论

Plasma Surface Treatment of Cocr and Nicr Alloys for Dental Applications: A Comparative Study of Tin Thin Film Plasma Deposition Techniques

SSRN

引用

SSRN 2024年

作者： Balica, Naasson Matheus Pereira Almeida, Larissa Solano Rossino, Luciana Sgarbi Pupim, Denise Monção, Renan Matos Costa, Thércio Henrique de Carvalho Santos, Rafaela Luiz Pereira Sousa, Rômulo Ribeiro Magalhães Nunes, Lívio César Cunha Federal University of Piauí Technology Center Graduate Program in Materials Science and Engineering Avenida Universitária s/n Ininga PI Teresina Brazil Federal University of São Carlos Graduate Program in Materials Science SP Sorocaba Brazil University of São Paulo Ribeirão Preto School of Dentistry Avenida do Café SP Ribeirão Preto Brazil Federal University of Rio Grande do Norte Technology Center Department of Mechanical Engineering University Campus Natal RN Lagoa Nova Brazil

Cobalt-chromium and nickel-chromium metal alloys have been widely used as biomaterials in the dental field due to their excellent physical-mechanical properties and biocompatibility, as well as the low cost of the material. However, in unfavorable environments, such as the oral cavity, these dental prostheses composed of these alloys can suffer alterations in their structure where they can undergo rapid changes with the surface corrosion process, which can vary with pH and temperature, typically related to changes in the patient's diet. The aim of this work is to carry out a comparative study between the cathodic cage (CC) and hollow cathode (HC) methods, in which a plasma deposition treatment of titanium nitride (TiN) thin films was carried out on CoCr and NiCr samples, in order to subsequently evaluate their surface characteristics and tribological properties in relation to each method. The samples were characterized using X-ray diffractometry (XRD), scanning electron microscopy (SEM/EDS) and micro abrasive wear tests on each sample from the three groups of alloys mentioned. It was observed that the TiN films provided greater resistance to the wear mechanism of all the samples, where through the characterizations, it can be inferred that the two types of treatments carried out on the samples are suitable for dental applications. © 2024, The Authors. All rights reserved.

关键词： Chromium alloys

来源：评论

学校读者我要写书评

暂无评论

New Insights into the Effects of Solidification Process on The Thermodynamic Parameters and Mechanical Properties of Cualbenbni Shape Memory Alloy

SSRN

引用

SSRN 2023年

作者： Silva, David D.S. Vieira, Rafael T. Falcão, Gabriely M.S. Brito, Ieverton C.A. Caluête, Rafael E. Gomes, Rodinei M. Oliveira, Danniel F. Federal University of São Carlos Graduate Program in Materials Science and Engineering SP São Carlos13565-905 Brazil Colorado School of Mines George S. Ansell Department of Metallurgical and Materials Engineering GoldenCO80401 United States Federal University of Paraíba Graduate Program in Materials Science and Engineering PB João Pessoa58051-900 Brazil Federal University of Paraíba Department of Materials Engineering PB João Pessoa58051-900 Brazil Federal University of Paraíba Department of Mechanical Engineering PB João Pessoa58051-900 Brazil

In this work, the influence of the solidification process on the microstructure, thermodynamic parameters and mechanical properties of CuAlBeNbNi shape memory alloy (SMA) was investigated. While directional solidification has been used to improve functional properties in Cu-based SMAs, the squeeze casting process has not yet been explored. The results indicate that the processes of unidirectional solidification and squeeze casting offer an alternative method to modify the thermodynamic parameters, mechanical properties, and microstructural properties of the CuAlBeNbNi SMA while keeping the composition constant. This study aims to fill the knowledge gap regarding the impact of solidification processes on the properties of Cu-based SMAs, specifically investigating CuAlBeNbNi SMAs. © 2023, The Authors. All rights reserved.

关键词： Microstructural evolution

来源：评论

学校读者我要写书评

暂无评论

Formation and Oer Properties of Nano-Porous Concentrated Tivzrnbcofe Alloy

SSRN

引用

SSRN 2024年

作者： Jorge, Alberto M. Chatenet, Marian Roche, Virginie Berthomé, Gregory Champion, Yannick LEPMI Grenoble38000 France Univ. Grenoble Alpes CNRS Grenoble INP SIMaP Grenoble38000 France Federal University of Sao Carlos Graduate Program of Materials Science and Engineering DEMa Sao Carlos13565-905 Brazil

A nano-porous Ti25 V0.5Zr13Nb51Co6Fe4 metallic alloy was produced by de-alloying (Ti31V26Zr12Nb26Co5)50Fe50. The material was characterized using X-ray diffraction and SEM imaging showing complex concentrated solid solution and interesting OER properties were revealed from cyclic voltammetry. X-ray photoelectron spectroscopy shows a significant content of Fe-doped Co(OH)2 at the surface of the nanoporous alloy that explains the high OER activity. Nanoporous structure in particular nanosized ligaments and surface curvature are identified in connexion to the OER properties. © 2024, The Authors. All rights reserved.

关键词： Cyclic voltammetry

来源：评论

学校读者我要写书评

暂无评论

Enhancement of effluent degradation by zinc oxide, carbon nitride, and carbon xerogel trifecta on brass monoliths

引用

Environmental science and Pollution Research 2024年第40期31卷 53472-53496页

作者： da Silva, Émerson Felipe Mendonça Garcia, Ramón Raudel Peña Rodrigues, Liana Alvares Napoleão, Daniella Carla Sanz, Oihane Almeida, Luciano Costa Department of Chemical Engineering Technology and Geoscience Center Federal University of Pernambuco PE Recife50740-521 Brazil Pós Graduate Program in Materials Science and Engineering Federal University of Piauí PI Teresina64049-550 Brazil Academic Unit of Cabo de Santo Agostinho Federal Rural University of Pernambuco PE Cabo de Santo Agostinho54518-430 Brazil Dept. of Applied Chemistry Chemistry Faculty University of the Basque Country UPV/EHU P. Lardizabala 3 San Sebastian20018 Spain Escola de Engenharia de Lorena EEL/USP Estrada Municipal Do Campinho S/N São Paulo LorenaCEP 12602-810 Brazil

In recent years, heterogeneous photocatalysis has emerged as a promising alternative for the treatment of organic pollutants. This technique offers several advantages, such as low cost and ease of operation. However, finding a semiconductor material that is both operationally viable and highly active under solar irradiation remains a challenge, often requiring materials of nanometric size. Furthermore, in many processes, photocatalysts are suspended in the solution, requiring additional steps to remove them. This can render the technique economically unviable, especially for nanosized catalysts. This work demonstrated the feasibility of using a structured photocatalyst (ZnO, g-C3N4, and carbon xerogel) optimized for this photodegradation process. The synthesized materials were characterized by nitrogen adsorption and desorption, X-ray diffraction (XRD), and diffuse reflectance spectroscopy (DRS). Adhesion testing demonstrated the efficiency of the deposition technique, with film adhesion exceeding 90%. The photocatalytic evaluation was performed using a mixture of three textile dyes in a recycle photoreactor, varying pH (4.7 and 10), recycle flow rate (2, 4, and 6 L h−1), immobilized mass (1, 2, and 3 mg cm−2), monolith height (1.5, 3.0, and 4.5 cm), and type of radiation (solar and visible artificials;and natural solar). The structured photocatalyst degraded over 99% of the dye mixture under artificial radiation. The solar energy results are highly promising, achieving a degradation efficiency of approximately 74%. Furthermore, it was possible to regenerate the structured photocatalyst up to seven consecutive times using exclusively natural solar light and maintain a degradation rate of around 70%. These results reinforce the feasibility and potential application of this system in photocatalytic reactions, highlighting its effectiveness and sustainability. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.

关键词： Heterojunctions

来源：评论

学校读者我要写书评

暂无评论

Centrifugal Spinning of Porous Polylactic Acid Fibers by Centrifugal Spinning with Phase Separation for Oil Removal Application

SSRN

引用

SSRN 2024年

作者： Negoro, Masaki Doan, Hoan Ngoc Vo, Phu Phong Khuat, Khanh Van Thi Kinashi, Kenji Sakai, Wataru Tsutsumi, Naoto Master’s Program of Innovative Materials Kyoto Institute of Technology Matsugasaki Sakyo Kyoto606-8585 Japan Tissue Engineering and Regenerative Medicine Laboratory School of Biomedical Engineering International University Vietnam National University Ho Chi Minh City Viet Nam Faculty of Chemistry University of Science Ho Chi Minh City Viet Nam Doctor’s Program of Materials Chemistry Graduate School of Science and Technology Kyoto Institute of Technology Matsugasaki Sakyo Kyoto606-8585 Japan Faculty of Materials Science and Engineering Kyoto Institute of Technology Matsugasaki Sakyo Kyoto606-8585 Japan

Developing biodegradable oil absorption fibrous materials is essential because discarding conventional separation materials could cause secondary pollution due to their nondegradable properties. In this study, highly hydrophobic and superoleophilic porous polylactic acid (PLA) fibers were prepared using centrifugal spinning combined with nonsolvent-induced phase separation. The porous structure of PLA fibers was controlled by the ratio between good solvent and nonsolvent in the spinning solutions. The morphology and physical properties of the obtained PLA fibers were investigated using various measurement techniques. The PLA fibrous membrane prepared from a PLA solution containing chloroform/dimethylformamide (80/20 w/w) indicated not only a high water contact angle but also a high oil sorption value. The porous PLA fibers are a potential candidate for use as green materials for environmental applications. © 2024, The Authors. All rights reserved.

关键词： Spinning (fibers)

来源：评论

学校读者我要写书评

暂无评论

Assessment of Simple Adhesive Substrates as a Method for Quantifying Microplastics and the Factors Influencing Capture

SSRN

引用

SSRN 2022年

作者： Rieland, Julie M. Hu, Zeyuan Deese, Julian S. Love, Brian J. Department of Materials Science and Engineering United States Department of Biomedical Engineering United States Macromolecular Science and Engineering Graduate Program 2300 Hayward St Ann ArborMI48109 United States

Microplastics are a growing environmental concern, with a large body of evidence documenting substantial distribution of plastic material in virtually all environmental compartments. Countermeasures that help to bind, aggregate, or coalesce these distributed particles might result in lower human and animal exposures. Pressure sensitive adhesives (PSAs) have been identified as a viable microplastic (MP) capture mechanism with a range of potential use conditions. As with any countermeasure, there is a need to evaluate their collection efficiency, cost, ease of installation, etc. Expanding on previous work, submerged, spray-coated PSAs were investigated as a quick and low-cost quantitative method to assess MP binding in water. Two molecular weights of poly(2-ethylhexyl acrylate) PSA (92k, 950k, and 50:50 bimodal distribution) were applied as spray-coated substrates to compare MP-adhesive interactions. Thin films of PSA (92k 6 ± 1 μm, 950k 4 ± 2 μm, 50:50 BD 6.5 ± 1 μm) were sprayed on borosilicate glass slides using a commercial air brush. Polydisperse nylon-12 particles varying in size from 15-30 µm in diameter were dispersed in aqueous solution between 0.01 and 5 mg mL -1 and agitated under ambient conditions as quantitative comparisons of adhesive wettability and net capture. Mixed assays were also performed comparing binding of common MP species including polyethylene, polystyrene, and polyester particles and fibers to understand how varying composition, size, and form factor affect adsorption. The glass slide method demonstrated linear trends associated with the MP binding to glass slides with respect both to exposure time and MP concentration. The adhesive wettability demonstrates bounding parameters under which high wettability adhesives excel at MP capture but may compromise the integrity of the adhesive film. © 2022, The Authors. All rights reserved.

关键词： Adhesives

来源：评论

学校读者我要写书评

暂无评论

Investigating the impact of metal ion variations in terephthalate metal–organic frameworks on the organic solvent nanofiltration performance of mixed matrix membranes

引用

Journal of Membrane science 2024年 700卷

作者： Ajebe, Eyasu Gebrie Hu, Chien Chieh Lugito, Graecia Hu, Chun-Po Hung, Wei-Song Lee, Kueir-Rarn Lai, Juin-Yih Graduate Institute of Applied Science and Technology Advanced Membrane Materials Research Center National Taiwan University of Science and Technology Taipei Taiwan Chemical Engineering Study Program Faculty of Industrial Technology Institut Teknologi Bandung West Java Indonesia Nanyang Technological University 1 Cleantech Loop Singapore R&D Center for Membrane Technology Chung Yuan University Chungli Taoyuan Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University Chungli Taoyuan Taiwan

Nano-fillers integrated into mixed matrix membranes (MMMs) present promising alternatives for organic solvent nanofiltration (OSN). In this work, our objective is to enhance OSN performance by incorporating terephthalate metal-organic frameworks (M-BDC, where M = Zr or Cu) into a P84 matrix to fabricate M-BDC/P84 composite MMMs. This work focuses on the influence of metal cluster variation on particle size, pore size distribution, and specific surface area of M-BDC, while systematically investigating the impact of M-BDC addition on OSN performance and underlying separation mechanisms. The synthesized membranes underwent comprehensive characterization using SEM, XRD, ATR-FTIR, contact angle, zeta potential, and thermogravimetric analysis. Significantly, all MMMs exhibited superior permeance and methyl blue (MB) rejection compared to P84 membranes. This enhancement is attributed to the improved interfacial contact between M-BDC and P84, as well as their effective dispersion within the membrane matrix. Interestingly, comparative analysis between Cu-BDC/P84 and Zr-BDC/P84 MMMs revealed the latter's superior permeance, attributed to its larger pore size and surface area. The resulting MMMs demonstrated outstanding MB rejection (>96.7%) with ethanol permeance of 21.5 and 19.0 LMH/Bar for Zr-BDC/P84 and Cu-BDC/P84 MMMs, respectively. Furthermore, the stable performance of M-BDC-based MMMs during prolonged MB/ethanol operation underscores their potential significance in the field of OSN, providing valuable insights for future membrane design and application. © 2024 Elsevier B.V.

关键词： Organometallics

来源：评论

学校读者我要写书评

暂无评论

Reliable operation of Cr2O3:Mg/β-Ga2O3 p-n heterojunction diodes at 600◦C

arXiv

引用

arXiv 2024年

作者： Callahan, William A. Egbo, Kingsley Lee, Cheng-Wei Ginley, David O'Hayre, Ryan Zakutayev, Andriy Materials Science Center National Renewable Energy Laboratory GoldenCO80401 United States Advanced Energy Systems Graduate Program Colorado School of Mines GoldenCO80401 United States Department of Metallurgical and Materials Engineering Colorado School of Mines GoldenCO80401 United States

β-Ga2O3-based semiconductor heterojunctions have recently demonstrated improved performance at high voltages and elevated temperatures and are thus promising for applications in power electronic devices and harsh-environment sensors. However, the long-term reliability of these ultra-wide band gap (UWBG) semiconductor devices remains barely addressed and may be strongly influenced by chemical reactions at the p-n heterojunction interface. Here, we experimentally demonstrate operation and evaluate the reliability of Cr2O3:Mg/β-Ga2O3 p-n heterojunction diodes at during extended operation at 600◦C, as well as after 30 repeated cycles between 25-550◦C. The calculated pO3-temperature phase stability diagram of the Ga-Cr-O material system predicts that Ga2O3 and Cr2O3 should remain thermodynamically stable in contact with each other over a wide range of oxygen pressures and operating temperatures. The fabricated Cr2O3:Mg/β-Ga2O3 p-n heterojunction diodes show room-temperature on/off ratios >104 at ±5V and a breakdown voltage (VBr) of -390V. The leakage current increases with increasing temperature up to 600◦C, which is attributed to Poole-Frenkel emission with a trap barrier height of 0.19 eV. Over the course of a 140-hour thermal soak at 600◦C, both the device turn-on voltage and on-state resistance increase from 1.08V and 5.34 mΩ-cm2 to 1.59V and 7.1 mΩ-cm2 respectively. This increase is attributed to the accumulation of Mg and MgO at the Cr2O3/Ga2O3 interface as observed from TOF-SIMS analysis. These findings inform future design strategies of UWBG semiconductor devices for harsh environment operation and underscore the need for further reliability assessments for β-Ga2O3 based devices. © 2024, CC BY.

关键词： Gallium compounds

来源：评论

学校读者我要写书评

暂无评论

Plasmonic Nanolaser by Silver Nanowire Embedded in CsPbBr3 Quantum Dots

Plasmonic Nanolaser by Silver Nanowire Embedded in CsPbBr3 Q...

引用

JSAP-OSA Joint Symposia, JSAP 2021

作者： Xing, Di Lin, Cheng-Chieh Won, Phillip Xiang, Rong Chen, Tzu-Pei A. Kamal, A. Syazwan Lee, Yang-Chun Ho, Ya-Lun Maruyama, Shigeo Ko, Seung Hwan Chen, Chun-Wei Delaunay, Jean-Jacques School of Engineering The University of Tokyo Japan International Graduate Program of Molecular Science and Technology National Taiwan University Taiwan Department of Materials Science and Engineering National Taiwan University Taiwan Department of Mechanical Engineering Seoul National University Korea Republic of Center of Atomic Initiative for New Materials National Taiwan University Taiwan

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：