检索结果-内蒙古大学图书馆

Microwave and Antenna Symposium (IMAS), International

作者： Josef Frankhouse Evans Addo-Mensah Uche Wejinya Department of Mechanical Engineering University of Arkansas - Fayetteville Materials Science and Engineering Graduate Program University of Arkansas - Fayetteville

ISBN: (数字)9798350356359

ISBN: (纸本)9798350356366

In this study, a Terahertz (THz) band antenna which can regulate its own resonant frequency without the requirement of manual adjustment is simulated. A polyvinylidene fluoride (PVDF) substrate is applied onto a rectangular graphene patch antenna. With a voltage potential applied onto the PVDF, the patch antenna can attenuate its frequency by physically changing the shape of the antenna, and in turn its resonant frequency. These antennas are within a 0.1 THz band between 1.32 THz to 1.22 THz measured from a radial bend of a flat surface to r = 75 μm, fitting into a return loss (S11) above -30 dB. Although the return loss did not show consistency, the resonating frequency shifted at a linear rate relative to the cylindrical bending.

关键词： Microwave antennas Patch antennas Graphene Resonant frequency Prototypes Bandwidth Bending Loss measurement Substrates Terahertz communications

来源：评论

学校读者我要写书评

暂无评论

Thermomechanical Characterization of Hot Surface Ignition Device Using Phenomenological Heat Flux Model

引用

JOURNAL OF PROPULSION AND POWER 2022年第4期38卷 656-670页

作者： Kang, Sang-Guk Ryu, Je Ir Motily, Austen H. Numkiatsakul, Prapassorn Lee, Tonghun Kriven, Waltraud M. Kim, Kenneth S. Kweon, Chol-Bum M. U.S. Army Research Laboratory Aberdeen Proving Ground MD 21005 Aerospace Engineer Weapons and Materials Research Directorate Postdoctoral Fellow Computational and Information Sciences Directorate University of Illinois at Urbana-Champaign Urbana IL 61801 Graduate Student Department of Mechanical Science and Engineering. Student Member AIAA Graduate Student Department of Materials Science and Engineering Professor Department of Mechanical Science and Engineering. Associate Fellow AIAA Professor Department of Materials Science and Engineering Mechanical Engineer Computational and Information Sciences Directorate. Member AIAA Program Manager Computational and Information Sciences Directorate. Member AIAA.

Modern aircraft compression ignition engines that seek to achieve fuel-flexible operation require ignition-assisting devices to perform reliably. Many military propulsion systems, and unmanned aircraft in particular, can use hot surface energy addition to improve engine performance. An analysis of the thermomechanical stress behavior of hot surface ignition devices is therefore critical to ensure that they can satisfy new operational requirements. In this paper, a phenomenological heat-flux model is proposed to simulate heat generation inside a heating element. Two finite element analysis models are established using the proposed heat-flux model in order to characterize the transient thermomechanical behavior of an ignition assistant: a two-dimensional (2-D) axisymmetric model with an equivalent cylindrical heating element and a three-dimensional (3-D) solid model with realistic heating element geometry. The transient behavior of the ignition assistant is investigated at standard conditions by characterizing the temperature and thermal stress inside the device for various input voltages. The effect of the nonaxisymmetric heating element geometry on the temperature and thermal stress distribution is assessed. Furthermore, the 3-D ignition assistant model is used to analyze the thermomechanical behavior of an ignition device subjected to a combustion event inside a rapid compression machine. Multiple circumferential orientations of the heating element plane relative to the spray axis are investigated. Results demonstrate that the observed maximum principal stress depends significantly on heating element orientation.

关键词： Heat Flux Stress Distribution Heat Generation Unmanned Aerial Vehicle Propulsion System Surface Energy Adaptive Mesh Refinement Fuel Injection CFD Simulation Fracture Toughness

来源：评论

学校读者我要写书评

暂无评论

Mo-terminated edges in two-dimensional molybdenum disulfide for site-specific hydrolysis and DNA cleavage

引用

materials Today 2025年 86卷 162-171页

作者： Wang, Cong Wu, Menghan Li, Muqing Zhao, Yingcan Zhao, Mingchuang Zhang, Yunhao Bai, Yichao Gao, Jianxiang Wang, Xiaoxia Tian, Xilin Zhang, Han Chang, Liang Zou, Xiaolong Liu, Bilu Kang, Feiyu Terrones, Mauricio Lei, Yu Institute of Materials Research Shenzhen Key Laboratory of Advanced Layered Materials for Value-added Applications Guangdong Provincial Key Laboratory of Thermal Management Engineering and Materials & Center of Double Helix Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen518055 China Institute of Materials Research & Shenzhen Geim Graphene Center Shenzhen Key Laboratory of Advanced Layered Materials for Value-added Applications Tsinghua-Berkeley Shenzhen Institute and Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen518055 China Environmental Science Program Department of Life Sciences Beijing Normal University-Hong Kong Baptist University United International College Guangdong519087 China Tsinghua Shenzhen International Graduate School Tsinghua University Shenzhen518055 China Department of Physics Department of Chemistry Department of Materials Sciences Center for 2-Dimensional and Layered Materials The Pennsylvania State University University ParkPA16802 United States International Collaborative Laboratory of 2D Materials for Optoelectronics Science and Technology of Ministry of Education Institute of Microscale Optoelectronics Shenzhen University Shenzhen518060 China

The hydrolysis of DNA serves as the foundational principle for gene engineering that enable precise gene cleavage at the molecular level. This process typically occurs in biological nucleases, which exhibit nucleobase-selective and catalytic hydrolysis capabilities rarely replicated in abiotic nanomaterials. Here, we demonstrate that molybdenum-terminated (Mo-terminated) edges of molybdenum disulfide (MoS2) possess the unique ability to abstract a proton (H+) from water molecules, thereby facilitating catalytic hydrolysis reactions that cleave the phosphodiester bonds in DNA through the action of hydroxide ions. The enhanced proton absorption at Mo-terminated edges of MoS2 significantly reduces the activation energy required for the DNA hydrolysis reaction. Furthermore, the favorable interaction between the Mo-terminated edges and thymine nucleobases promotes both charge transfer and P-O bond cleavage, enabling targeted DNA hydrolysis at 'TTTTTTT' sequences under dark conditions. This discovery underscores the potential of MoS2 as a stable, efficient nanosystem for precise genetic editing, heralding advanced applications in the field of gene engineering. © 2025 The Author(s)

关键词： Activation energy

来源：评论

学校读者我要写书评

暂无评论

Injectable Platelet-Rich Fibrin in Contact with Bone Substitutes, Porous Zirconia, or Laser-Textured Implant Surfaces: A Detailed Morphological Analysis

引用

Biomedical materials and Devices 2024年第1期2卷 415-426页

作者： Oliveira, Miguel Noronha Varela, Hugo Almeida Nascimento, Rubens M. Sahoo, Narayan Carvalho, Oscar Henriques, Bruno Souza, Júlio C. M. Ceramic and Composite Materials Research Group (CERMAT) Department of Mechanical Engineering (EMC) Federal University of Santa Catarina (UFSC) Post-graduate Program in Materials Science and Engineering Federal University of Rio Grande Norte (UFRN) Center for MicroElectroMechanical Systems (CMEMS-UMINHO) Universidade do Minho LABBELS - Associate Laboratory University of Minho University Institute of Health Sciences (IUCS) CESPU

The aim of the present study was to perform a detailed morphological analysis of an injectable platelet rich fibrin after combination with two different particulate hydroxyapatite-based granules, a porous zirconia block, and laser-textured zirconia or titanium surfaces. Blood samples were harvested from three participants to prepare the flowable injectable PRF in contact or not with particulate hydroxyapatite (Hap), bone mineral granules (DBBM), porous zirconia blocks, laser-textured titanium or zirconia surfaces. Optical and scanning electron microscopy (SEM) were used to evaluate the fibrin network density, fibrin fibers’ diameter, blood cells, and the interaction of PRF with the biomaterials. Histomorphometry of the flowable PRF was also performed using the hematoxylin–eosin staining protocol. Specimens were independently evaluated by two blinded and well-trained researchers in histomorphometry and microscopy. Particulate Hap and DBBM shown different morphological aspects by SEM analyses since DBBM revealed macro- and micro-scale pores while Hap revealed a dense structure. Hydroxyapatite and DBBM granules were entirely embedded by the fibrin-network in the presence of leukocytes and blood platelets. The zirconia porous structured was filled with PRF and its components. Also, the laser-structured zirconia or implant surfaces were entirely coated with the PRF fibrin network embedding leukocytes and blood platelets. Laser-textured titanium surfaces revealed macro- and micro-scale irregularities that increase the surface area and retention of the injectable PRF. Histomorphometric analyses revealed complementary details on the distribution of lymphocytes, red blood cells, and fibrin associated with platelet aggregation. The flowing and viscosity of an injectable platelet rich fibrin provided an agglomeration of synthetic or xenogeneic particulate bone substitutes and the coating of porous zirconia and textured implant surfaces as inspected by scanning electron microsc

关键词： Bone healing Bone substitutes Histology Morphology Platelet-rich fibrin

来源：评论

学校读者我要写书评

暂无评论

Conductive Mof Coating for Suppressing the Mn Dissolution in Limn2o4 Toward Long-Life Lithium-Ion Batteries

SSRN

引用

SSRN 2024年

作者： Kim, Eunji Lee, Jeongmin Park, Junghyun Nam, Kwan Woo Department of Chemical Engineering and Materials Science Graduate Program in System Health Science and Engineering Ewha Womans University Seoul03760 Korea Republic of

Spinel lithium manganese oxide (LiMn2O4, denoted LMO) is one of the promising cathode materials with non-toxicity, high operating voltage, and low cost. However, structural collapse during battery cycling — caused by Mn dissolution and the Jahn-Teller effect — is a critical disadvantage, reducing cycle retention, particularly at high temperatures. In this investigation, to solve these critical issues of LMO cathode, we introduce Cu3(HITP)2, a conductive two-dimensional (2D) MOF as a surface coating material through a simple process. Coating the conductive 2D Cu3(HITP)2 MOF increases the electrical conductivity and shows the effect of suppressing the dissolution of Mn by enriching the surface of LMO with Mn4+. By suppressing Mn dissolution, structural stability also improves, resulting in offsetting all the inherent problems of LMO. As a result, at 50 °C, CuHITP–LMO exhibits an initial capacity of 98.7 mAh g–1 at 100 mA g–1 and achieved a capacity of 74.5 mAh g–1 after 100 cycles, indicating outstanding cyclability. This research highlights the potential of conductive 2D MOF to improve the electrochemical performances of battery cathode. © 2024, The Authors. All rights reserved.

关键词： Cathodes

来源：评论

学校读者我要写书评

暂无评论

Cr-modified CuAlBe shape memory alloy: Role of microstructure, thermodynamic parameters, superelasticity, dissipated energy and corrosion resistance

Journal of Alloys and Metallurgical Systems

引用

Journal of Alloys and Metallurgical Systems 2024年 7卷

作者： Silva, David D.S. Candido, Gemierson V.M. Alves, Ricardo F. Dias, Elisabeth A.M.G.S. Oliveira, Danniel F. Federal University of São Carlos Graduate Program in Materials Science and Engineering SP São Carlos13565-905 Brazil Colorado School of Mines George S. Ansell Department of Metallurgical and Materials Engineering GoldenCO80401 United States Federal University of Paraíba Graduate Program in Mechanical Engineering PB João Pessoa58051-900 Brazil Federal University of Rio Grande do Norte Graduate Program in Materials Science and Engineering RN Natal59078-970 Brazil Federal University of Paraíba Graduate Program in Materials Science and Engineering PB João Pessoa58051-900 Brazil

This study reports the effects of Cr addition on the microstructure, superelasticity and corrosion resistance improvement of CuAlBe shape memory alloy. Analysis via structural, morphological, thermal, mechanical and electrochemical characterizations were performed. The analyses revealed austenite as the stable phase at room temperature for all samples. The increase in the Cr content caused a slight increase in the recovery rate and dissipated energy. Electrochemical results demonstrate that a small addition of Cr (0.1–0.3 wt%) increase the corrosion resistance due the decreases of the corrosion current density and increase of the corrosion potential. © 2024 The Authors

关键词： Corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

Reusable Hydrogen Storage Tank with Flange Design 10

Reusable Hydrogen Storage Tank with Flange Design

引用

10th International Conference on Applied System Innovation, ICASI 2024

作者： Li, Yun-Qi Chen, Hsuan-Jung Yang, Hsi-Wen Chen, Chih-Yuan Chang, Shao-Fu Chen, Ssu-Ying Chen, Chien-Chon College of Engineering and Science Ph.D. Program in Materials and Chemical Engineering National United University Miaoli Taiwan Michigan State University Department of Chemistry MI48824 United States National United University Department of Materials Engineering Miaoli Taiwan Graduate Institute of Intellectual Property National Taipei University of Technology Taiwan National United University Department of Energy Engineering Miaoli Taiwan

ISBN: (纸本)9798350394924

For how to store and transport hydrogen, the first thought is to store hydrogen directly in the cylinder. However, this method is not desirable, because generally at least 700 atm high pressure, the hydrogen contained in the cylinder to be useful. Therefore it is very unsafe at such high pressures. In This paper, we design and production of a new generation of solid-state hydrogen storage and discharge container. The goal of 'development of solid-state hydrogen storage technology' is to break through the bottlenecks of hydrogen storage technology safety, hydrogen storage density, high-efficiency hydrogen absorption and release, transportation safety, and engineering practice. © 2024 IEEE.

关键词： Aluminum

来源：评论

学校读者我要写书评

暂无评论

Compact Room Temperature-Operated Sensing System for Methanol and Ethanol Mixture Separation and Quantification

Compact Room Temperature-Operated Sensing System for Methano...

引用

IEEE SENSORS

作者： Meng-Qun Feng Tanju Yildirim Alexandru Nica Kosuke Minami Kota Shiba Genki Yoshikawa Research Center for Macromolecules and Biomaterials National Institute for Materials Science (NIMS) Tsukuba Japan Materials Science and Engineering Graduate School of Pure and Applied Science University of Tsukuba Tsukuba Japan Faculty of Science and Engineering Southern Cross University East Lismore Australia

ISBN: (数字)9798350363517

ISBN: (纸本)9798350363524

For practical olfactory sensing with a safe and low-power system, it is important to be able to operate easily at room temperature. However, this has not been a trivial task to achieve with existing conventional gas separation and sensing devices. In this study, a novel compact room temperature-operated sensing system is proposed to separate and quantify each component in a vapor mixture with simple operation. The sensing system consists of a portable and replaceable gas separation column and a sensing module containing a nanomechanical Membrane-type Surface stress Sensor, MSS. Proton transfer reaction time-of-flight mass spectrometry (PTR-TOF-MS) results show that the gas separation column can clearly separate methanol and ethanol in their mixtures. The sensing signals from the column-MSS system are consistent with the peaks measured by PTR-TOF-MS. For mixtures of methanol and ethanol with various ratios, a clear correspondence is observed between the output signals and the theoretically calculated vapor pressure ratios of each mixture. The developed compact room temperature-operated sensing system can discriminate and quantify different methanol and ethanol mixtures, paving the way for practical applications of olfactory sensing devices.

关键词： Temperature sensors Temperature measurement Protons Ethanol Surface stress Olfactory Quality control Sensors Pressure measurement Methanol

来源：评论

学校读者我要写书评

暂无评论

Biomass-Based Discrete Furan Oligomers as materials for Electrochromic Devices

引用

ACS Sustainable Chemistry and engineering 2024年第1期12卷 459-469页

作者： Atayde, Eduardo C. Fong, Guan-Lun Yeh, Jyun-Yi Matsagar, Babasaheb M. Wang, Yu-Cheng Chen, De-Chian Peng, Chi-How Li, Yi-Pei Yamauchi, Yusuke Ho, Kuo-Chuan Wu, Kevin C.-W. Molecular Science and Technology Program Taiwan International Graduate Program (TIGP-MST) Academia Sinica No. 128 Sec. 2 Academia Road Taipei 11529 Taiwan Department of Chemistry National Tsing Hua University No. 101 Sec. 2 Kuang-Fu Road Hsinchu 30013 Taiwan Department of Chemical Engineering National Taiwan University No. 1 Sec. 4 Roosevelt Road Taipei 10617 Taiwan Sustainable Chemical Science and Technology Program Taiwan International Graduate Program (TIGP-SCST) Academia Sinica No. 128 Sec. 2 Academia Road Taipei 11529 Taiwan School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology (AIBN) The University of Queensl Brisbane 4072 QLD Australia Department of Materials Process Engineering Graduate School of Engineering Nagoya University Nagoya 464-8603 Japan Institute of Polymer Science and Engineering National Taiwan University No.1 Sec. 4 Roosevelt Rd. Taipei 10617 Taiwan Department of Chemical Engineering and Materials Science Yuan Ze University No. 135 Yuandong Rd. Taoyuan 320 Taiwan

Electrochromic devices (ECDs) are materials that can undergo reversible changes in transmittance when exposed to different applied potentials. While many conjugated heterocyclic oligomers, such as oligothiophenes, have been developed for this purpose, there is no reported study on the use of discrete oligomeric furans as ECD materials. In this work, we introduce a furan trimer that can be utilized as a discrete electrochromic material, which transitions from light yellow to red and has a very high coloration efficiency of 1940 cm²/C at 507 nm. We propose that the reversible π-stack formation of the oligomer radical cations is behind this phenomenon, as evidenced by both experimental and computational results. The derivability of this oligomer from biomass and its facile synthesis make it an interesting alternative for other existing organic electrochromic materials. © 2023 American Chemical Society

关键词： electrochromism furan oligomer hydroxyalkylation−alkylation reaction solvatochromism π-stacks

来源：评论

学校读者我要写书评

暂无评论

On the development of modular polyurethane-based bioelastomers for rapid hemostasis and wound healing

引用

Regenerative biomaterials 2023年第1期10卷 640-654页

作者： Wanxin Guo Binan Zhao Muhammad Shafiq Xiao Yu Yihong Shen Jie Cui Yujie Chen Pengfei Cai Zhengchao Yuan Mohamed EL-Newehy Hany EL-Hamshary Yosry Morsi Binbin Sun Jianfeng Pan Xiumei Mo State Key Laboratory for Modification of Chemical Fibers and Polymer Materials Shanghai Engineering Research Center of Nano-Biomaterials and Regenerative MedicineCollege of Biological Science and Medical EngineeringDonghua UniversitySongjiangShanghai 201620P.R.China Department of Orthopedics Shanghai Tongji HospitalSchool of MedicineTongji UniversityPutuoShanghai 200065China Department of Chemical Engineering Faculty of EngineeringGraduate SchoolKyushu UniversityFukuoka 819-0395Japan Department of Chemistry College of ScienceKing Saud UniversityRiyadh 11451Saudi Arabia Faculty of Engineering and Industrial Sciences Swinburne University of TechnologyBoroondaraVIC 3122Australia Department of Orthopedics Shanghai Tenth People’s HospitalSchool of MedicineTongji UniversityJinganShanghai 200072China

Massive hemorrhage may be detrimental to the patients,which necessitates the advent of new materials with high hemostatic efficiency and good *** objective of this research was to screen for the effect of the different types of bio-elastomers as hemostatic dressings.3D loose nanofiber sponges were prepared;PU-TA/Gel showed promising ***(PU)was synthesized and electrospun to afford porous sponges,which were crosslinked with glutaraldehyde(GA).FTIR and 1H-NMR evidenced the successful synthesis of *** prepared PU-TA/Gel sponge had the highest porosity and water absorption ***,PU-TA/Gel sponges exhibited cytocompatibility,negligible hemolysis and the shortest clotting ***-TA/Gel sponge rapidly induced stable blood clots with shorter hemostasis time and less bleeding volume in a liver injury model in ***,PU-TA/Gel sponges also induced good skin regeneration in a full-thickness excisional defect model as revealed by the histological *** results showed that the PU-TA/Gel-based sponges may offer an alternative platform for hemostasis and wound healing.

关键词： polyurethane electrospinning hemostasis material wound healing tissue regeneration regenerative medicine

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：