检索结果-内蒙古大学图书馆

TREATMENT OF A LANDFILL LEACHATE IN POWDERED ACTIVATED CARBON ENHANCED SEQUENCING BATCH BIOREACTORS

ENVIRONMENTAL PROGRESS 1987年第1期6卷 1-8页

作者： YING, WC BONK, RR SOJKA, SA Occidental Chemical Corporation Grand Island Technology Center Grand Island NY 14072 Robert B. Bonk:is an associate chemist of Environmental Technology at the Grand Island Technology Center New York of Occidental Chemical Corporation. He has participated in a variety of environmental control research and development projects including biological chemical and physical processes for treating industrial wastewaters. He earned a B.S. in Chemistry from Rochester Institute of Technology and an M.B.A. from Canisius College. He is enrolled in the graduate Water Resources and Environmental Engineering program at State University of New York at Buffalo.

Addition of powdered activated carbon (PAC) significantly improved treatment of a chemical waste landfill leachate in sequencing batch bioreactors (SBRs). Concentrations for many of the monitored halogenated organic compounds in the effluent were below their respective detection limits. Excellent treatment efficiency was achieved under a variety of operating conditions: wastewater composition, feed rate, hydraulic retention time, organic loading, PAC dosages, biomass and PAC concentrations in the bioreactors. The PAC-SBR performance was unaffected when wastewater feeding was suspended during weekends and holidays. The PAC-SBR treatment cost is much lower than either that of the conventional granular activated carbon adsorption technology or the two-stage process of biodegradation and carbon treatment.

关键词： WASTEWATER

来源：评论

学校读者我要写书评

暂无评论

MODERNIZATION OF THE BARQUE EAGLE

引用

NAVAL ENGINEERS JOURNAL 1985年第4期97卷 49-57页

作者： TSAI, NT HACISKI, EC KUCINSKI, JJ Nien-tszr Tsai:is a naval architect with the Hull Section Naval Engineering Division U.S. Coast Guard Headquarters. He received his B.S. and M.S. in mechanical engineering from ChengKung University in Taiwan China and his Ph.D. in mechanical engineering from the University of Rochester in 1969. Prior to joining the Coast Guard in 1982 Mr. Tsai worked at General Dynamics Litton Ship Systems and the David Taylor Naval Ship Research and Development Center in the area of ship dynamics moored and towed ocean systems evaluation and development. He is a member of ASME and ASNE. Eugene C. Haciski:received his B.S. degree in mechanics from the Warsaw University of Technology in 1946 and his M.S. degree in naval architecture from the Polytechnical University of Gdansk Poland in 1950. Prior to joining the U.S. Coast Guard in 1967 he served as a project engineer in the Gdansk Ship Design Center and in the Shipyard Maua in Rio de Janeiro Brazil. After serving 7 years in the U.S. Coast Guard Yard in Curtis Bay Maryland as a supervisory naval architect and 3 years in the Merchant Marine Technical Division USCG he was assigned in 1976 to his current position of chief Hull Section Naval Engineering Division USCG Headquarters. LCDR. Joseph Kucinski:is currently assigned to the Coast Guard Yard as chief quality assurance. He has served in the Yard as ship superintendent and ship superintendent coordinator. Prior to his assignment at the Yard he served as engineer officer aboard USCGC Courageous. He has also served on USCGC Boutwell and as the marine safety officer Duluth Minn. He is a 1973 graduate of Officer Candidate School. LCdr. Kucinski has prior enlisted service in the Navy's nuclear power program.

The U.S. Coast Guard training barque Eagle (WIX-327), former Horst Wessel , was built in 1936, by Blohm & Voss in Germany, for the German Navy and to the rules of Germanischer Lloyd. Since 1946 she has served continuously as the training vessel for the U.S. Coast Guard Academy. To improve safety and performance, an extensive phased modernization was undertaken from 1979 through 1983 at the Coast Guard Yard. Changes in the subdivision, ballast and tankages were made to satisfy the criteria for two-compartment damage stability. Extensive renovation of machinery, structure, navigation components and habitability was also accomplished during the same period. Scheduled summer training cruises were maintainedeach year.

关键词： SAILING VESSELS

来源：评论

学校读者我要写书评

暂无评论

ADVANCED-CYCLE GAS-TURBINES FOR NAVAL SHIP PROPULSION

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 262-271页

作者： BOWEN, TL GROGHAN, DA Thomas L. Bowen began his career at the David W. Taylor Naval Ship Research and Development Center in 1969 by enrolling in the Cooperative Education Program at the Annapolis laboratory. He earned a Bachelor of Science degree in chemical engineering in 1973 at West Virginia Institute of Technology. Daniel A. Groghan:received a Bachelor of Science degree in mechanical engineering from West Virginia Institute of Technology in 1966 and later did graduate work at the George Washington University and the University of Maryland. He came to the Naval Ship Systems Command in June 1966 and began working in the Internal Combustion and Gas Turbine Engines Branch. He worked on development of the Orenda OT-4 recuperated gas turbine and marinization of the Garrett 831 gas turbine. He was also project engineer responsible for fleet installations and product improvements on the Solar Saturn gas turbines Boeing gas turbines American Locomotive diesels Electro-Motive diesels and Ruston Pax-man diesels. In 1976 he became head of the Engines Research and Development Branch where he was responsible for such programs as development of hot section gas turbine materials improved gas turbine inlets Pratt and Whitney FT9 gas turbine General Electric LM2500 Condition Monitor and initiation of the RACER program. In 1982 he became the Program Manager for propulsion systems development where he is responsible for developments on the DDG-51 AOE-6 and initiation of the recuperated cruise gas turbine.

Investigations are currently being conducted by the Navy and several contractors to determine the technical feasibility and cost effectiveness of advanced regenerative or intercooled-regenerative gas turbines as a naval propulsion engine for future mid-size surface combatants. A comparison of the performance characteristics of these engines indicates that significant increases in the thermal efficiency above current simple-cycle engines will result by adding heat exchangers for regeneration alone or with intercooling. Design and performance characteristics of several advanced-cycle gas turbines are described which utilize turbomachinery from various existing simple-cycle gas turbines. Estimates of the weight and volume of recuperators and intercoolers for these conceptual engines are provided. The nominal part-load fuel consumption trends of the simple-cycle and the advanced-cycle engines are used to compare annual fuel usage of typical ships with various combinations of propulsion engines. The relative impacts of the advanced-cycle gas turbine on propulsion machinery spaces are compared with other energy efficient prime movers using the simple-cycle gas turbine as the baseline. Commercial applications for an advanced-cycle gas turbine are surveyed according to output power and market sector. This paper presents an overview of current results and discusses the technology areas which require additional investigation.

关键词：

来源：评论

学校读者我要写书评

暂无评论

FUTURE PROPULSION MACHINERY technology FOR GAS-TURBINE POWERED FRIGATES, DESTROYERS, AND CRUISERS

引用

NAVAL ENGINEERS JOURNAL 1984年第2期96卷 34-46页

作者： BASKERVILLE, JE QUANDT, ER DONOVAN, MR USN The Authors Commander James E. Baskerville USNis presently assigned to Naval Sea Systems Command (NA VSEA) as the Ship Design Manager for the DDG 51 the Navy's next generation surface combatant. A graduate of the U.S. Naval Academy Class of 1969 he is a qualified Surface Warfare Officer and designated Engineering Duty Officer (ED). He received his M.S. degree in Mechanical Engineering and his professional degree of Ocean Engineer from the Massachusetts Institute of Technology (MIT) and holds a patent right on an Electronic Control and Response System. His naval assignments include tours in USSRamsey (FFG-2) Aide and Flag Lieutenant to the Commander Naval Electronic Systems Command and Ship Superintendent Surface Type Desk Officer and Assistant Design Superintendent at NA VSHIPYD Pearl Harbor. He was awarded the Meritorious Service Medal for distinguished performance at Pearl Harbor Naval Shipyard. As an author he has contributed articles to the ASNEJournaland given presentations at local sections on ship design the use of innovative technology in ship repair and maintenance and the costs and risks associated with engineering progress. Commander Baskerville is a registered Professional Engineer in the State of Virginia an adjunct professor teaching marine engineering at Virginia Tech. and in addition to ASNE which he joined in 1975 is a member of SNAME Tau Beta Pi Sigma Xi ASME and the American Society of Heating Refrigeration and Air Conditioning Engineers (ASHRAE). Dr. Earl R. Quandt:received his degree of Chemical Engineer from the University of Cincinnati in 1956 and his Ph.D. degree in Chemical Engineering from the University of Pittsburgh in 1961. He worked in the naval reactors program at the Bettis Atomic Power Laboratory from 1956 to 1963. Since that time he has been with David Taylor Naval Ship Research and Development Center Annapolis Maryland where he is Head of the Power Systems Division. He contributed to this paper while on a one year assignment to the U.S. Naval Academy as V

A turning point occurred in naval engineering in 1972 when the U.S. N avy chose to use marine gas turbines for the propulsion of its new SPRUANCE and PERRY Class ships. This paper reviews the more than twenty years of experience with turbine technology and its design integration into combat ships needed to make that decision. It is concluded that the availability of a good second generation aircraft derivative engine with proven reliability and a strong commercial base, i.e., the LM-2500, was as important to the decision as was the predicted improved ship effectiveness and cost benefits. This paper discusses improvements that can be made to the twin engine, single gear, single propeller shaft system. Focusing only on this mechanical transmission concept, it addresses the impact of possible improvements to the engine, gear, and shafting. In particular, the paper discusses current LM-2500 related R&D efforts to: (a) obtain improved part-power fuel rates, (b) integrate with a reversing reduction gear, and (c) add on a waste heat recovery steam cycle. Looking ahead to the year 2000, this paper suggests that a successor to the ubiquitous LM-2500 will appear in the 15 MW power range to provide the next step in the evolution of the twin engine package. This new naval engine will most likely be based on an aircraft core that exists at present, such that it will have demonstrated its reliability and commercial potential through many hours of testing prior to its mid-1990 marine conversion. This new engine is expected to offer improved air flow, an excellent fuel rate (approaching a flat 0.30 LB/HP-HR), and effective maintenance monitoring, all at some expense in size, weight, and cost. The year 2000 engine will burn a liquid hydrocarbon fuel similar to JP-5 because of its aircraft origins. Combined with advances in gear and shafting technology, the full twin engine propulsion system of the year 2000 should be markedly lighter, smaller, and more efficient than today's units.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE NO FRAME CONCEPT - ITS IMPACT ON SHIPYARD COST

引用

NAVAL ENGINEERS JOURNAL 1984年第3期96卷 218-232页

作者： NAPPI, NS WALZ, RW WIERNICKI, CJ Natale S. Nappi:graduated from City College of New York in 1954 with a B.S. degree in civil engineering and received his M.S. in civil engineering from the Polytechnic Institute of Brooklyn in 1959. He began his professional career in 1954 at the New York Naval Shipyard as a naval architect (structures) performing detail structural design and fabrication studies for CVAs LPDs DDs and CGs and eventually became a supervisory naval architect (structures). From 1965 to 1973 he was a member of the staff of the Computer-Aided Design Division at the David Taylor Naval Ship Research and Development Center (DTNSRDC). As such he was involved in the development of the computer structural design tool the SSDP (in association with Frank M. Lev) and automated detail design programs (CASDOS). His current position is Senior Naval Architect Consultant in the structural integrity group of the Ship Structures Division Structures Department DTNSRDC. Mr. Nappi is the author and co-author of numerous technical papers and reports covering a wide spectrum of topics such as automated structural design process design for producibility and survivability material weight and cost trade-off studies and structural weight determination for high performance ships (i.e. SES SWATH HYSWAS). He has lectured on the subjects of design for survivability and ship structures at the Naval Post Graduate School and MIT. He is a member of ASNE ASCE U.S. Naval Institute Sigma Xi and is a registered Professional Engineer in the State of New York. Mr. Nappi was a member of the NAVSEA working commitee for the computer supported design planning effort and is currently a member of the DTNSRDC ASSET Advisory Committee. Ronald W. Walz:graduated in 1974 from Pennsylvania State University with a B.S. degree in civil engineering. He began his professional career in 1974 at the David Taylor Naval Ship Research and Development Center as a structural engineer in the structural design concepts group of the Ship Structures Division Structures Department.

A proposed cost effective alternative to current U.S. Navy structurally configured hulls is presented in this paper. This proposed design for producibility concept involves the elimination of structural stanchions and transverse web frames. The potential impact of this “no frame” concept on structural design, weight and construction and material costs for naval surface frigates and destroyers is reflected in 1) reduced costs for the installation of distributive systems and 2) a reduced number and complexity of structural details providing a more reliable and less costly structure. This study was performed in three parts: 1) Determine the most feasible length between bulkheads without frames; 2) Using this length perform detail weight studies and construction and material costs analysis comparison on a 72-foot long hull module, with and without frames, for a FFG-7, and 3) Estimate the saving in man hours of labor on the installation of distributive systems and shipfitting for an FFG-7. For the feasible length studies on the “no frame” structural configuration, thirty-seven strength, weight and vertical center of gravity studies were performed on two ship classes; twenty-two on the FFG-7 class and fifteen on the DD-963 class. The detailed weight studies and construction and material cost analyses were conducted for FFG-7 “no frame” and “as built” modules. Results indicating the “no frame” concept module was 6.8% heavier and 14.8% less costly than the “as built” module. For the impact of an FFG-7 “no frame” structurally configured hull on the cost of labor required for the installation of distributive systems and for other functional work such as ship fitting, welding, and electrical, this study indicated a reduction of 169,206 labor hours per ship, representing 7.12% of the total required man hours to fabricate an FFG-7 class ship. With the employment of the “no frame” concept, certain areas of significant concern and potential risk were addressed. These include: 1) t

关键词：

来源：评论

学校读者我要写书评

暂无评论

RUDDER ROLL STABILIZATION FOR COAST GUARD CUTTERS AND FRIGATES

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 267-282页

作者： BAITIS, E WOOLAVER, DA BECK, TA Dr. Erich Baitis: a native of Germany came to the David W. Taylor Naval Ship Research and Development Center in 1957 as a co-operative student/trainee and received his Bachelor of Science Degree in Physics from Virginia Polytechnic Institute. As a 32-year-old naval architect in 1971 he received both the VietnamHonorServiceMedaland the Navy'sMeritoriousCivilianServiceAwardfor his eight months as liaison with the Vietnamese NAVVS ferro-cement ship program. As head of the Seakeeping and Stabilization Group of the Surface Ship Dynamics Branch his work has led to the development of a new standard Ship Motion Computer Program and the application of ship motions to ship habitability operability and survivability problems. A major area of this work has been the ship/aircraft interface which is particularly sensitive to ship motions wind and other environmental factors. Mr. Dennis A. Woolaver:has been employed as a Naval Architect at the David W. Taylor Naval Ship Research and Development Center since 1965 where his work has resulted in numerous patents. He received his Bachelor of Science Degree in Electrical Engineering from George Washington University where he also completed graduate work in Communication Theory. Additional fields of study include Computer Science and Personnel Management. Current efforts are directed toward surface ship motion mitigation data acquisition and statistical analysis. He is a member of the Society of Naval Architects and Marine Engineers. Lt. Tom A. Beck USCG: joined the UnitedStatesCoastGuardin 1966 where he trained as an Electronics Technician. He received a Bachelor of Science Degree in Electrical Engineering from Columbia University in 1978. From 1978 to 1979 he was an Electronics Project Officer at the CoastGuardElectronics Laboratory in Alexandria Virginia. Since 1980 he has been a Research and Development Project Officer in the Sensor Technology Branch of the CoastGuardsOffice of Research and Development. Lt. Beck is a member of the Institute of Electronic and Elect

The potential use of rudders as anti-roll devices has long been recognized. However, the possible interference of this secondary function of the rudder with its primary role as the steering mechanism has prevented, for many years, the development of practical rudder roll stabilizers. The practical feasibility of rudder roll stabilization has, however, in recent years been demonstrated by two systems designed and developed for operational evaluation aboard two different U.S. C oast G uard Cutters, i.e., Jarvis and Mellon of the 3,000-ton, 378-foot HAMILTON Class. The authors describe the major components of the rudder roll stabilization (RRS) system, along with the design goals and methodology as applied to these first two prototypes. In addition, a brief history of the hardware development is provided in order to show some of the lessons learned. The near flawless performance of the prototypes over the past four years of operational use in the North Pacific is documented. Results from various sea trials and reports of the ship operators are cited and discussed. The paper concludes with a discussion of the costs and benefits of roll stabilization achieved using both a modern anti-roll fin system, as well as two different performance level RRS systems. The benefits of roll stabilization are demonstrated by the relative expansion in the operational envelopes of the USS OLIVER HAZARD PERRY (FFG-7) Class. The varying levels of roll stabilization suggest that the merits of fins and RRS systems are strongly dependent on mission requirements and the environment. The demonstrated performance of the reliable RRS system offers the naval ship acquisition manager a good economical stabilization system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE STRUCTURAL SYNTHESIS DESIGN program - ITS IMPACT ON THE FLEET

引用

NAVAL ENGINEERS JOURNAL 1983年第3期95卷 87-99页

作者： WIERNICKI, CJ GOODING, TG NAPPI, NS Mr. Christopher J. Wiernicki:graduated from Vanderbilt University in 1980 with a B.E. degree in Structural Engineering. Upon graduation he began his professional career at the David Taylor Naval Ship Research and Development Center. As a structural engineer in the Surface Ship Structures Division Mr. Wiernicki was responsible for developing improved methods and procedures for designing and evaluating structural systems for surf ace combatants. Specific projects included design for producibility development and evaluation of automated ship structural design methods and participation in the structural design of the CG 49 Cruiser and the current DDG 51 Destroyer. In 1982 Mr. Wiernicki received his M.S. degree in Ocean Engineering from George Washington University. Mr. Wiernicki is a recipient of the SNAME 1982-82 Graduate Scholarship and is currently doing post graduate work in Naval Architecture at Massachusetts Institute of Technology he is a member of ASNE SNAME ASCE and Chi Epsilon. Mr. Thomas G. Gooding:graduated in 1975 from the University of Michigan with B.S. degrees in Oceanography and Naval Architecture. After graduation he began his professional career at the Naval Ship Engineering Center (NA VSEC) as a structural engineer. From 1975 till 1978 Mr. Gooding worked in the area of ship dry docking and was the structural task leader on the complex overhaul ofUSS Long Beach (CGN-9). Mr. Gooding returned to the University of Michigan to receive a M.S. in Naval Architecture in 1979. Currently Mr. Gooding is the structural task leader on the DDGX/DDG 51 program at the Naval Sea Systems Command (NAVSEA). Mr. Gooding is a member of SNAME and the Naval Institute. Mr. Natale S. Nappi:graduated from City College of New York in 1954 with a Bachelor of Civil Engineering and received his M.S. in Civil Engineering from Polytechnic Institute of Brooklyn in 1959. He began his professional career in 1964 at the New York Naval Shipyard as a Naval Architect (Structure) performing detail structural design and fabrication s

The structural design of a ship's section is a complicated, repetitive and time consuming task. With the advent of new technology, high speed computers have enabled the ship designer to accomplish in a matter of seconds what would formerly take days to accomplish by hand. The Structural Synthesis Design program (SSDP) is a N avy developed computer-aided design tool which is used to design (or to analyze) the longitudinal scantlings for a variety of ship cross sections, consisting of any practical combinations of decks, platforms, bulkheads and materials, i.e., various steel and aluminum alloys. The final hull section design will have the lowest practical weight for the chosen geometric configuration, structural arrangements, and imposed loadings. The scantling developed by the program will satisfy all U.S. N avy ship structural design criteria. An explanation of the objective and design elements of N avy ship structures is included. The rationale behind the SSDP design philosophy is developed along with the significant program capabilities. In an attempt to highlight the influence of automated design procedures on the current naval ship design process, the effect of the SSDP on the DDG 51 destroyer structural development is addressed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

SUPERIORITY AT SEA - AN AFFORDABLE SYSTEM FOR THE 1990S

引用

NAVAL ENGINEERS JOURNAL 1982年第2期94卷 29-38页

作者： FLUK, H The authorgraduated from New York University in 1952 as an Aeronautical Engineer and entered the United States Air Force (USAF). He attended the USAF Institute of Technology for graduate Aerodynamics and following that served three years as a Project Officer in the field of Special Weapons. Returning to civilian life in 1957 he joined Curtiss-Wright Corporation's Engine Division and shortly thereafter transferred to the company's Model 200 V/STOL Aircraft Program later to become the Tri-Service X-19. His responsibilities variously included Flight Loads and Controls Aerodynamic Research and publication of the X-19 Aircraft Technology. In 1966 he joined Boeing's VERTOL Division initially working in helicopter stability and then in downwash and autorotation characteristics. This was followed by research and development and long-range planning and then assignment to introduce new computer services to the Engineering Department. In 1975 he joined the Naval Air Engineering Center Lakehurst N.J. to provide technology in horizontal and vertical engine jet flows and at the present time is Manager for Systems Studies in the Advanced Systems Office where he works with the Aircraft and Ship Communities to enhance military effectiveness at sea.

A weapons system has been configured specifically to counter (or preempt) the long-range standoff missile threat. Rationale for this system starts with a discussion of cost and weight, and shows why modern multi-mission systems have become intolerably expensive. Questions are raised regarding the advantages and disadvantages of building future naval aviation forces solely around the Aircraft Carrier Battle Group. The application of a few small modern ships, forming a future Battle Force, holds promise for large economies. Likewise, some accepted views regarding CTOL (Conventional Take Off & Laundry) and V/STOL (Vertical Short Take Off & Launding) aircraft are revisted in terms of their relative costs. A weapons system is proposed which, at one-fourth the weight of an Aircraft Carrier Battle Group, may be produced and operated for one-third the cost.

关键词：

来源：评论

学校读者我要写书评

暂无评论

SHIP DESIGN AND THE NAVY LABORATORY

引用

NAVAL ENGINEERS JOURNAL 1981年第2期93卷 33-46页

作者： ELLSWORTH, WM CLARK, DJ Mr. William M. Ellsworth:is graduate of the State University of Iowa from which he received B.S. and M.S. degrees in Engineering majoring in Fluid Mechanics. Upon graduation in 1948 he joined the Staff of the David Taylor Model Basin (DTMB) and during the following ten years held various positions in the Hydromechanics Laboratory. In 1958 he left his position as Head of the Towing Problems Branch and joined Cleveland Pneumatic Industries which later became Pneumo Dynamics Corporation (PDC). He was General Manager of PDC's Systems Engineering Division and in 1961 became a corporate Vice President. In 1964 he returned to DTMB where he became the Technical Manager of the Hydrofoil Development Program Office. In October 1969 he was appointed to his present position of Associate Technical Director for Systems Development and Head Systems Development Department David W. Taylor Naval Ship Research and Development Center. He is a licensed Professional Engineer in the state of Maryland an Honorary Life Member of ASNE and a Fellow of ASME. He also has been the author of a number of papers and reports in the field of Naval Engineering and has served as a member of the ASNE Council from 1972 to 1974 was a member of the ASNE Flagship Section Council (1977-80) and is currently a member of the ASNE Honors and Awards Committee. He became a member of ASNE in 1960 and received his Honorary Life Membership when he was awarded the ASNE Gold Medal for 1973 at ASNE Day 1974. Dennis J. Clark:received his Bachelor's degree in Civil Engineering from City College of New York in 1963. Upon graduating he joined DTMB's Structural Mechanics Laboratory where he worked on a number of full-scale trials of surface ships evaluating the structural integrity of icebreakers sonar domes and Hydrofoils. He eventually was responsible for the entire structural research program in support of the Hydrofoil Advanced Development Office and in 1971 joined the Hydrofoil Program Office as the Manager of Systems Integration. In that capacity he

In today's environment of rapidly escalating costs, increasing technological complexity, and growing threat, we must actively seek ways to improve our effectiveness in applying limited resources to the design of Navy ships. One important aspect of this process involves the development and application of new technology to ship design. An exhaustive treatment of this subject is clearly beyond the scope of a single technical paper. It is the Authors' objective, however, to acquaint the reader with the nature and role of the Navy's Laboratory Community in general and DTNSRDC in particular; to examine some recent initiatives taken at DTNSRDC and some key issues; and, hopefully, to contribute in some small way to the building of a stronger constructive partnership between ship development and design activities. The view is that from the perspective of a Navy Laboratory and pertains to the design of the ship itself as opposed to the weapons system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

THE UNIMAST CONCEPT - A MAJOR DEPARTURE IN SHIPBOARD RADAR ANTENNA INSTALLATION PHILOSOPHY

引用

NAVAL ENGINEERS JOURNAL 1981年第2期93卷 82-89页

作者： BIONDI, RJ KRUGER, BE THE AUTHORS: Mr. Roy J. Biondi:received his B.S.E.E. degree from the University of Illinois and has since taken additional graduate studies at The George Washington University. Currently he is Head of the Ship Type Combat System Integration Branch (Code-6141) Naval Sea Systems Command. Prior to his present appointment he served as Radar Branch Head in the former Naval Ship Engineering Center (NA VSEC) and was responsible for development and production of shipboard radars such as the AN/SPS-48 AN/SPS-49 AN/SPS-52 and AN/SPS-55. His primary Navy Radar and Combat System experience was attained during his earlier career in the Navy's Bureau of Ships where he was the AN/SPS-48 Radar Project Manager as well as the Navy Tactical Data System Data Processing and Display Project Engineer - a total of twenty years of Navy Radar and NTDS experience. In addition to ASNE which he joined in 1977 he is a member of IEEE and ASE and has had several technical papers published on Radar Radar Processing and Transmission Lines. Mr. Bradford E. Kruger:is a Senior Member of the Technical Staff at ITT Gilfillan Los Angeles Calif. He received his B.S.E.E. and M.S.E.E. degrees from the University of California at Berkeley in 1955 and 1956 respectively and has been with Gilfillan since then. For the past fifteen years he has been involved in the concept formulation and design of numerous radar systems for the Army Navy and Marine Corps. Most recently he has been the Principal Radar Systems Engineer for the SSURADS then the DDGX Program. In addition to ASNE which he joined in June 1980 he is a member of IEEE and holds several patents in Radar and Antenna Technology.

The best topside location for an antenna is on top of the highest mast on the ship, thus affording all-around coverage and minimum interference. However, usually only one antenna can occupy that site. Modern naval combatants have numerous antennas, and the necessary compromises in mounting all of them means that even the best site is often electro-magnetically compromised by adjacent structures and other antennas. A contrary approach is to mount larger antennas lower, and to design the ship to minimize blockage. This is “The UNIMAST Concept,” which argues for a single mast on which are mounted all the ship's major rotating surveillance antennas. The larger antennas rotate around the lower part of the mast, while lighter antennas, e.g., surface search, are sited above. This paper discusses the degradation of sidelobes due to present topside design and numerically relates degradation to Electronic Counter-Countermeasures (ECCM) performance. Removal of that degradation via the UNIMAST Concept requires that a device known as an Annular Rotary Coupler (ARC) be used. The development of just such a high power, wide-band ARC on a Navy-sponsored R&D contract is herein described. Also described is the potential backfitting of the UNIMAST Concept to existing ships; e.g., the DDG-993. Battle damage vulnerability of the UNIMAST Concept with respect to a conventional two mast design is addressed. It is argued that the UNIMAST Concept affords no degradation in vulnerability due to improved potential for protecting vital antenna parts.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：