检索结果-内蒙古大学图书馆

Effective monitoring of environmental hazardous drug moxifloxacin hydrochloride using silver selenide on octadecyl amine modified reduced graphene oxide composite

引用

Journal of Environmental Chemical Engineering 2024年第1期12卷

作者： Hwa, Kuo-Yuan Ganguly, Anindita Graduate Institute of Organic and Polymeric Materials National Taipei University of Technology Taipei China Department of Molecular Science and Engineering National Taipei University of Technology Taipei China International Graduate Program in Energy and Optoelectronic Materials National Taipei University of Technology China

The precise detection of antibiotics is very critical. Here, silver selenide (Ag2Se) nanorods are hydrothermally synthesized and ultrasonically treated with rGO surface modified with octadecylamine (rGO-ODA). The optical, structural, morphological, and functional analysis were performed which revealed the orthorhombic pattern of the P2221 E space group, the crystalline purity of Ag2Se, and the substantial composite formation. The morphological studies revealed nanorod like structure of the Ag2Se material and wrinkled sheets of rGO-ODA. A sensor that detects moxifloxacin hydrochloride (MOXH) antibiotic using the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and UV-Vis absorbance was developed. For DPV analysis, a quite low value for detection limit 12.46 nM was exhibited with 0.199 μM – 425.16 μM linear range, and a sensitivity of 5.0439 μA M−1cm−2. For UV-Vis, the sensor demonstrated a very low limit of detection 17.42 nM over 0.12 μM – 7.7 μM working range. The use of this sensor was validated in real-time analysis with industrial waste water, fish, human blood, and urine samples. The results suggested an excellent rate of analyte recovery and enhanced efficiency for MOXH detection with a potential for commercialization in the future. © 2023

关键词： Nanorods

来源：评论

学校读者我要写书评

暂无评论

Rational effect of CuSe2phase with octadecyl amine modified reduced graphene composite for dual-mode sensing of environmental hazardous anthelminthic drug in aquatic and biological samples

引用

Journal of Environmental Chemical Engineering 2023年第1期11卷

作者： Hwa, Kuo-Yuan Ganguly, Anindita Santhan, Aravindan Department of Molecular Science and Engineering National Taipei University of Technology Taipei Taiwan International Graduate Program in Energy and Optoelectronic Materials National Taipei University of Technology Taipei Taiwan

The increasing usage of antihelminthic drug mebendazole (MEB) in humans and livestock poses serious threat and is considered a significant environmental pollutant. Hence, monitoring the MEB residues in environmental samples, and human fluids is essential to decrease the ecological risk and improve the health of humans. In this work, copper selenide (CuSe2) nano/microspheres were hydrothermally synthesized and ultrasonically treated with rGO surface modified with ODA alkyl amine (rGO-ODA). The optical, structural, morphological, and functional analysis were performed which revealed the CuSe2 in marcasite phase, orthorhombic pattern with Pnnm space group, and substantial composite formation. The morphological studies revealed sphere structure of the CuSe2 and wrinkled sheets of rGO-ODA. A sensor that detects MEB using the cyclic voltammetry (CV), differential pulse voltammetry (DPV) and UV-Vis absorbance techniques was developed. For DPV analysis, the sensor exhibited a very low value for limit of detection 13.55 nM and a sensitivity of 9.4871 μA M-1cm-2. For UV-Vis, the sensor demonstrated a very low limit of detection 22.3 nM. The use of this sensor was validated in real-time analysis with aquatic and biological real samples. The results suggested > 90% of analyte recovery and enhanced efficiency for MEB detection with a potential for commercialization in future. © 2022 Elsevier Ltd.

关键词： Copper compounds

来源：评论

学校读者我要写书评

暂无评论

Surface engineering of ZnO electrocatalyst by N doping towards electrochemical CO_(2) reduction

引用

Journal of Energy Chemistry 2024年第1期88卷 71-81,I0002页

作者： Rohini Subhash Kanase Getasew Mulualem Zewdie Maheswari Arunachalam Jyoti Badiger Suzan Abdelfattah Sayed Kwang-Soon Ahn Jun-Seok Ha Uk Sim Hyeyoung Shin Soon Hyung Kang Department of Interdisciplinary Program for Photonic Engineering Chonnam National UniversityGwangju 61186Republic of Korea Graduate School of Energy Science and Technology(GEST) Chungnam National University99 Daehak-roYuseong-guDaejeon 34134Republic of Korea Department of Chemistry Education and Optoelectronic Convergence Research Center Chonnam National UniversityGwangju 61186Republic of Korea Department of Advanced Chemicals and Engineering Chonnam National UniversityGwangju 61186Republic of Korea School of Chemical Engineering Yeungnam UniversityGyeongsan 38541Republic of Korea Department of Energy Engineering Korea Institute of Energy Technology(KENTECH)Naju 58217Republic of Korea

The discovery of efficient,selective,and stable electrocatalysts can be a key point to produce the largescale chemical fuels via electrochemical CO_(2) reduction(ECR).In this study,an earth-abundant and nontoxic ZnO-based electrocatalyst was developed for use in gas-diffusion electrodes(GDE),and the effect of nitrogen(N)doping on the ECR activity of ZnO electrocatalysts was ***,a ZnO nanosheet was prepared via the hydrothermal method,and nitridation was performed at different times to control the N-doping *** an increase in the N-doping content,the morphological properties of the nanosheet changed significantly,namely,the 2D nanosheets transformed into irregularly shaped ***,the ECR performance of Zn O electrocatalysts with different N-doping content was assessed in 1.0 M KHCO_(3) electrolyte using a gas-diffusion electrode-based ECR *** the ECR activity increased after a small amount of N doping,it decreased for higher N doping *** them,the N:ZnO-1 h electrocatalysts showed the best CO selectivity,with a faradaic efficiency(FE_(CO))of 92.7%at-0.73 V *** hydrogen electrode(RHE),which was greater than that of an undoped Zn O electrocatalyst(FE_(CO)of 63.4%at-0.78 V_(RHE)).Also,the N:ZnO-1 h electrocatalyst exhibited outstanding durability for 16 h,with a partial current density of-92.1 mA cm^(-2).This improvement of N:ZnO-1 h electrocatalyst can be explained by density functional theory calculations,demonstrating that this improvement of N:ZnO-1 h electrocatalyst comes from(ⅰ)the optimized active sites lowering the free energy barrier for the rate-determining step(RDS),and(ⅱ)the modification of electronic structure enhancing the electron transfer rate by N doping.

关键词： ZnO N-doped ZnO Gas-diffusion electrode CO Selectivity Electrochemical CO_(2)reduction

来源：评论

学校读者我要写书评

暂无评论

Three-dimensional magnetization reconstruction from electron optical phase images with physical constraints

引用

Science China(Physics,Mechanics & Astronomy) 2024年第11期67卷 122-132页

作者： Boyao Lyu Shihua Zhao Yibo Zhang Weiwei Wang Fengshan Zheng Rafal E.Dunin-Borkowski Jiadong Zang Haifeng Du Anhui Province Key Laboratory of Low-Energy Quantum Materials and Devices High Magnetic Field LaboratoryHefei Institutes of Physical ScienceChinese Academy of SciencesHefei 230031China Science Island Branch Graduate School of University of Science and Technology of ChinaHefei 230026China Department of Physics and Astronomy University of New HampshireDurham 03824USA Department of Physics The City College of New YorkNew York 10031USA Physics Program Graduate Center of the City University of New YorkNew York 10016USA Department of Chemistry University of New HampshireDurham 03824USA Institutes of Physical Science and Information Technology Anhui UniversityHefei 230601China Spin-X Institute Center for Electron MicroscopySchool of Physics and OptoelectronicsState Key Laboratory of Luminescent Materials and DevicesGuangdong-Hong Kong-Macao Joint Laboratory of Optoelectronic and Magnetic Functional MaterialsSouth China University of TechnologyGuangzhou 511442China Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons Forschungszentrum JülichJülich 52425Germany

The ability to characterize three-dimensional(3D)magnetization distributions in nanoscale magnetic materials and devices is essential to fully understand their static and dynamic magnetic *** contrast techniques in the transmission electron microscope(TEM),such as electron holography and electron ptychography,can be used to record two-dimensional(2D)projections of the in-plane magnetic induction of 3D nanoscale *** the 3D magnetic induction can in principle be reconstructed from one or more tilt series of such 2D projections,conventional tomographic reconstruction algorithms do not recover the 3D magnetization within a sample ***,we use simulations to describe the basis of an improved model-based algorithm for the tomographic reconstruction of a 3D magnetization distribution from one or more tilt series of electron optical phase images recorded in the *** algorithm allows a wide range of physical constraints,including a priori information about the sample geometry and magnetic parameters,to be *** also makes use of minimization of the micromagnetic energy in the loss *** demonstrate the reconstruction of the 3D magnetization of a localized magnetic soliton—a hopfion ring—and discuss the influence of noise,choice of magnetic constants,maximum tilt angle and number of tilt axes on the *** algorithm can in principle be adapted for other magnetic contrast imaging techniques in the TEM,as well as for other magnetic characterization techniques,such as those based on X-rays or neutrons.

关键词： three-dimensional magnetization vector field tomography differentiable programming electron holography micromagnetism

来源：评论

学校读者我要写书评

暂无评论

An ultra thin,bright,and sensitive interactive tactile display based on organic mechanoluminescence for dual-mode handwriting identification

引用

InfoMat 2024年第6期6卷 76-87页

作者： Tingting Hou Wenlang Li Haoyu Wang Yuantian Zheng Chaojie Chen Haoran Zhang Kai Chen Huilin Xie Xin Li Shaoshuai He Siwei Zhang Dengfeng Peng Cheng Yang Jacky W.Y.Lam Ben Zhong Tang Yunlong Zi Department of Mechanical and Automation Engineering The Chinese University of Hong KongHong Kongthe People's Republic of China Department of Chemistry Hong Kong Branch of Chinese National Engineering Research Center for Tissue Restoration and Reconstruction and Institute for Advanced StudyThe Hong Kong University of Science and TechnologyHong Kongthe People's Republic of China Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province College of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhenthe People's Republic of China Thrust of Sustainable Energy and Environment The Hong Kong University of Science and Technology(Guangzhou)Guangzhouthe People's Republic of China The Hong Kong University of Science and Technology Interdisciplinary Program Office Hong Kong SARthe People's Republic of China Institute of Materials Research Tsinghua Shenzhen International Graduate SchoolTsinghua UniversityShenzhenthe People's Republic of China School of Science and Engineering Shenzhen Institute of Aggregate Science and TechnologyThe Chinese University of Hong KongShenzhenthe People's Republic of China HKUST Shenzhen-Hong Kong Collaborative Innovation Research Institute Shenzhenthe People's Republic of China Guangzhou HKUST Fok Ying Tung Research Institute Guangzhouthe People's Republic of China

Visible light-based human–machine interactive media is capable of transmitting electrical readouts to machines and providing intuitive feedback to users ***,many inorganic mechanoluminescent(ML)materials-based interactive media,typically ZnS-loaded phosphors(ZLPs),have been successfully ***,organic ML materials-based solutions were rarely exploited despite their huge merits of strong structural modification,abundant luminescence property,low cost,easy preparation,and so ***,we propose a novel interactive tactile display(ITD)based on organic ML materials(Cz-A6-dye)and triboelectric nanogenerator,with ultra-brightness(130%enhancement)and ultra-low threshold pressure(57%reduction)as compared to *** proposed ITD achieves the conversion of weak mechanical stimuli into visible light and electrical signals simultaneously,without extra power ***,the relationship between the luminous performance of organic ML materials and mechanical force is quantified,benefiting from the uniform ML layer *** by convolutional neural networks,the high-accuracy recognition(97.1%)for handwriting and identity of users is realized at the same ***,the ITD has great potential for intelligent wearable electronics and classified military applications.

关键词： interactive media organic mechanoluminescence triboelectric nanogenerators

来源：评论

学校读者我要写书评

暂无评论

Platform for Evanescent Wave Sensor Fabrication Based on 3D-Printed Fiber Optic Holder

Platform for Evanescent Wave Sensor Fabrication Based on 3D-...

引用

Optical Fiber Sensors (LAWOFS), Latin American Workshop on

作者： Afonso Henrique Henschel Baptista Pedro Bertemes-Filho Aleksander Paterno Raquel Bettega Jose Pedro Mansueto Serbena Nathalia Prediger Ricardo Kamikawachi Department of Electrical Engineering Center for Science and Technology - Santa Catarina State University – CCT-UDESC Joinville Brazil Group of Organic Optoelectronic Devices (GOOD) Federal University of Parana – UFPR Curitiba Brazil Graduate Program in Electrical and Computer Engineering Federal University of Technology - Parana – UTFPR Curitiba Brazil

ISBN: (数字)9786589532026

ISBN: (纸本)9798350362725

This paper describes the low-cost manufacturing process of an evanescent wave fiber sensor platform that allows the etching of the fiber in hydrofluoric acid with the proposed 3D-printed fiber holder in an acid resistant material. The fiber holder is practical for allowing several processing procedures during its use and sensor fabrication, allowing sensor optical and electrical operation. In this work, some aspects of its characterization are presented in the optical domain showing the excitation of surface plasmons in the visible range, and also indication of its electrical operation of the thin-film as electrode.

关键词： Optical fiber polarization Optical fiber sensors Gold Optical polarization Biomedical optical imaging Optical device fabrication Optical films

来源：评论

学校读者我要写书评

暂无评论

Calibration of nuclear charge density distribution by back-propagation neural networks

引用

Physical Review C 2023年第3期108卷 034315-034315页

作者： Zu-Xing Yang (杨祖星) Xiao-Hua Fan (范小华) Tomoya Naito (内藤智也) Zhong-Ming Niu (牛中明) Zhi-Pan Li (李志攀) Haozhao Liang (梁豪兆) RIKEN Nishina Center Wako 351-0198 Japan School of Physical Science and Technology Southwest University Chongqing 400715 China RIKEN Interdisciplinary Theoretical and Mathematical Sciences Program Wako 351-0198 Japan Department of Physics Graduate School of Science The University of Tokyo Tokyo 113-0033 Japan School of Physics and Optoelectronic Engineering Anhui University Hefei 230601 China

Based on the back-propagation neural networks and density functional theory, a supervised learning is performed firstly to generate the nuclear charge density distributions. The charge density is further calibrated to the experimental charge radii by a composite loss function. It is found that, when the parity, pairing, and shell effects are taken into account, about 96% of the nuclei in the validation set fall within 2 standard deviations of the predicted charge radii. Moreover, the kink in charge radii on Hg isotopes has been successfully reproduced. The calibrated charge density is then mapped to the matter density and further mapped to the binding energies according to the Hohenberg-Kohn theorem. It provides an improved description of some nuclei in both binding energies and charge radii. Moreover, the anomalous overbinding in Ca48 implies that the segmental calibrations by neural networks for beyond-mean-field effects deserve further discussion.

关键词： Binding energy & masses Nuclear charge radii Artificial neural networks Density functional theory Machine learning

来源：评论

学校读者我要写书评

暂无评论

Development of high on/off current ratio in p-type copper oxide thin-film transistors with a back-end-of-line compatible process

引用

Journal of Vacuum Science and technology A: Vacuum, Surfaces and Films 2024年第5期42卷

作者： Kuo, Chi-Yuan Lin, Wei-Chen Lo, Tsung-Tien Shen, Ching-Hsuan Shen, Ming-Yu Lee, Chia-Chan Lin, Chi-Ping Lin, Yuang-Ming Huang, Haw-Tyng Yeh, Po-Chun Chen, Hsin-Chu Wu, Chih-I Graduate Institute of Photonics and Optoelectronic Department of Electrical Engineering National Taiwan University Taipei106 Taiwan Program of Quantum Technology and Advanced Material College of Science National Tsing Hua University Hsinchu300 Taiwan Institute of Innovative Semiconductor Manufacturing National Sun Yat-sen University Kaohsiung804 Taiwan Institute of Advanced Semiconductor Packaging and Testing National Sun Yat-sen University Kaohsiung804 Taiwan Department of Materials Science and Engineering National Taiwan University Taipei106 Taiwan Electronic and Optoelectronic System Research Laboratories Industrial Technology Research Institute Hsinchu300 Taiwan

The objective of this study is to develop an efficient process to synthesize wafer scale p-type cuprous oxide (Cu2O) with the back-end-of-line (BEOL) compatible process (2/Si substrates followed by rapid thermal oxidation to oxidize it into large-area, uniform Cu2O. Bottom-gate Cu2O thin-film transistors (TFTs) were fabricated as gate dielectric on 100 nm thermal oxide. The results of the ID-VG curve demonstrate that we have successfully fabricated BEOL-compatible p-type Cu2O TFTs. The drain-off current can be achieved to 0.1 pA, with the highest on/off ratio reaching up to 6 orders. Significantly, the TFT with an on/off ratio of 106 is sufficient to meet the requirements for digital circuit applications, including logic circuits, and the BEOL-compatible process (2O TFTs. © 2024 Author(s).

关键词： Thin film transistors

来源：评论

学校读者我要写书评

暂无评论

Mechanically reprogrammable Pancharatnam-Berry metasurface for microwaves

引用

Advanced Photonics 2022年第1期4卷 69-79页

作者： Quan Xu Xiaoqiang Su Xueqian Zhang Lijuan Dong Lifeng Liu Yunlong Shi Qiu Wang Ming Kang Andrea Alù Shuang Zhang Jiaguang Han Weili Zhang Tianjin University Center for Terahertz Waves and College of Precision Instrument and Optoelectronics EngineeringKey Laboratory of Optoelectronic Information Technology(Ministry of Education of China)TianjinChina Shanxi Datong University Institute of Solid State Physics and College of Physics and Electronic ScienceShanxi Province Key Laboratory of Microstructure Electromagnetic Functional MaterialsDatongChina Wuhan University of Technology School of Information EngineeringWuhanChina Tianjin Normal University College of Physics and Materials ScienceTianjinChina City University of New York Advanced Science Research CenterPhotonics InitiativeNew YorkUnited States City University of New York Graduate CenterPhysics ProgramNew YorkUnited States University of Hong Kong Faculty of ScienceDepartment of PhysicsHong KongChina University of Hong Kong Department of Electrical and Electronic EngineeringHong KongChina Guilin University of Electronic Technology Guangxi Key Laboratory of Optoelectronic Information ProcessingSchool of Optoelectronic EngineeringGuilinChina Oklahoma State University School of Electrical and Computer EngineeringStillwaterOklahomaUnited States

Metasurfaces have enabled the realization of several optical functionalities over an ultrathin platform,fostering the exciting field of flat *** metasurfaces are achieved by arranging a layout of static meta-atoms to imprint a desired operation on the impinging wavefront,but their functionality cannot be *** and programmability of metasurfaces are the next important step to broaden their impact,adding customized on-demand functionality in which each meta-atom can be individually *** demonstrate a mechanical metasurface platform with controllable rotation at the meta-atom level,which can implement continuous Pancharatnam–Berry phase control of circularly polarized *** the proof-of-concept experiments,we demonstrate metalensing,focused vortex beam generation,and holographic imaging in the same metasurface template,exhibiting versatility and superior *** dynamic control of electromagnetic waves using a single,low-cost metasurface paves an avenue towards practical applications,driving the field of reprogrammable intelligent metasurfaces for a variety of applications.

关键词： reprogrammable metasurfaces Pancharatnam-Berry phase mechanical metasurfaces microwaves

来源：评论

学校读者我要写书评

暂无评论

Photonic Terahertz Phased Array

arXiv

引用

arXiv 2024年

作者： Niu, Li Feng, Xi Zhang, Xueqian Lu, Yongchang Wang, Qingwei Xu, Quan Chen, Xieyu Ma, Jiajun Qiu, Haidi Sha, Wei E.I. Zhang, Shuang Alù, Andrea Zhang, Weili Han, Jiaguang Center for Terahertz Waves College of Precision Instrument and Optoelectronics Engineering The Key Laboratory of Optoelectronics Information and Technology Tianjin University Tianjin300072 China Key Laboratory of Micro-nano Electronic Devices and Smart Systems of Zhejiang Province College of Information Science & Electronic Engineering Zhejiang University Hangzhou310027 China Department of Electrical & Electronic Engineering University of Hong Kong 999077 Hong Kong Photonics Initiative Advanced Science Research Center City University of New York New York10031 United States Physics Program Graduate Center City University of New York New York10016 United States School of Electrical and Computer Engineering Oklahoma State University StillwaterOK74078 United States Guangxi Key Laboratory of Optoelectronic Information Processing School of Optoelectronic Engineering Guilin University of Electronic Technology Guilin541004 China

Phased arrays are crucial in various technologies, such as radar and wireless communications, due to their ability to precisely control and steer electromagnetic waves. This precise control improves signal processing and enhances imaging performance. However, extending phased arrays to the terahertz (THz) frequency range has proven challenging, especially for high-frequency operation, broadband performance, two-dimensional (2D) phase control with large antenna arrays, and strong phase modulation. Here, we introduce a photonic platform to realize a THz phased array that bypasses the above challenges. Our method employs 2D phase coding with 2-bit across a broad THz frequency range from 0.8 to 1.4 THz. The core of our design is a pixelated nonlinear Pancharatnam-Berry metasurface driven by a spatially modulated femtosecond laser, allowing precise phase control of THz signals. We showcase the effectiveness of our method through four proof-of-concept applications: single beamforming, dual beamforming, imaging and vortex beam generation. The realized photonic platform provides a promising pathway for developing broadband phased arrays in the THz regime. Copyright © 2024, The Authors. All rights reserved.

关键词： Terahertz waves

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：