检索结果-内蒙古大学图书馆

International Conference on Advanced mechatronic systems (ICAMechS)

作者： Hongbo Wang Fuhai Deng Lingxue Ren Xiaohua Shi Hao Zhang Liyu Xie Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Qinhuangdao China Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of Education Qinhuangdao China

This paper presents a multi-joint lower limbs rehabilitation robot with three degrees of freedom. The robot includes seat, left mechanical leg, right mechanical leg and electric control box, and each mechanical leg includes the hip joint, knee joint and ankle joint which correspond to the hip joint, knee joint and ankle joint of human. The mechanical structure of the rehabilitation robot is described. By adjusting the seat angle, the patient can do the rehabilitation training in different postures. However, when the posture of human upper body changes with the elevation of the seat, the swing limit position of human thigh also changes. In order to guarantee the safety of patients, the mechanical limit of hip joint is designed to be variable. Therefore, the workspace of the robot is also variable. The inverse kinematics and variable workspace of the rehabilitation robot are analyzed. The trajectory planning for the variable workspaces is discussed and the flow chart of the trajectory planning is given.

关键词： Joints robots Trajectory Hip Training Equations Knee

来源：评论

学校读者我要写书评

暂无评论

Design of propulsion mechanism for vascular interventional operation robot

Design of propulsion mechanism for vascular interventional o...

引用

International Conference on Advanced mechatronic systems (ICAMechS)

作者： Hongbo Wang Hesuo Tian Huanghuang Guo Xue Yang Yu Tian Xinyu Hu Jianyu Chen Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Qinhuangdao China School of Mechanical Engineering University of Jinan Jinan China

Minimally invasive surgery has advantage of reducing the size of the body's trauma, post-operative pain and length of hospital stay. This paper proposes a new type of propulsion mechanism that can simulate the specific operations of human hands in vascular interventional procedures. We conducted detailed structural design and analysis of this propulsion mechanism so that the device can perform the function of delivering the catheter and guide wire simultaneously or separately. The new device allows for easy disassembly of the catheter or guide wire and meets the requirements for real-time monitoring of catheter and guide wire delivery resistance during vascular interventional procedures. The advancing mechanism can assist the doctor in completing the basic operations of the vascular intervention surgery and reduce the surgical intensity of the doctor.

关键词： Wires Propulsion Gears Catheters Thumb robots

来源：评论

学校读者我要写书评

暂无评论

Task-oriented design method and experimental research of six-component force sensor

Lecture Notes in Computer Science (including subseries Lectu...

引用

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 2014年 8917卷 1-12页

作者： Yao, Jiantao Li, Wenju Zhang, Hongyu Xu, Yundou Zhao, Yongsheng Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Qinhuangdao066004 China Key Laboratory of Advanced Forging and Stamping Technology and Science Ministry of Education of China Yanshan University Qinhuangdao066004 China

As the isotropy performance widely used for evaluating parallel six-component force sensor is not suitable for a certain task, the task-oriented design method of the sensor is proposed. The mathematic model of sensor is built with the screw theory;based on the task requirement, the task ellipsoid is established. Then, with ellipsoid method, the design method for the sensor structure is proposed and the structure constraints are deduced. In order to perform peg-in-hole assembly task with the task-oriented sensor, the sensor prototype is designed and manufactured. Based on the assembly platform, the experimental research is carried out. The research results are useful for the design and application of six-component force sensor. © Springer International Publishing Switzerland 2014.

关键词： Structural design

来源：评论

学校读者我要写书评

暂无评论

New Method for Type Synthesis of 2R1T Redundant Driven parallel Mechanisms

引用

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering 2019年第23期55卷 25-37页

作者： Li, Yongquan Zhang, Yang Guo, Yu Li, Xuran Zhang, Lijie Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Qinhuangdao066004 China Key Laboratory of Advanced Forging & Stamping Technology and Science Ministry of Education of China Yanshan University Qinhuangdao066004 China Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control Yanshan University Qinhuangdao066004 China

In the fields of milling, riveting and welding, 2R1T DOF actuators are required, especially in high stiffness, large workspace, good driving stability and other occasions, redundant actuators are required to improve the performance of 2R1T parallel mechanism. Therefore, based on Grassmann linear geometry and atlas method, a new method for typy synthesis of 2R1T redundant actuated parallel mechanism is proposed. The degree-of-freedom curve of the moving platform is obtained according to the motion mode of the mechanism, and then the constraint curve of the moving platform is obtained according to the dual rule. The redundant constraint curve and its equivalent curve were obtained by adding redundant lines to the moving platform constraint curve. According to the allocation principle of branch chain constraint, it is divided into 7 schemes. The corresponding branch chain are constructed based on the constraint scheme by using the atlas method, and the preliminary type of the mechanism is synthesized according to the selection and allocation rule of the branch chain. Each scheme synthesizes 12, 67, 96, 0, 12, 48 and 16 new types respectively, and a total of 251 new types are synthesized, including some 2R1T redundant parallel mechanisms studied in literature. The instantaneous analysis of the synthesized mechanism is carried out by the atlas method, and it is found that the synthesized mechanism of scheme 1 and scheme 2 is instantaneous. An improved method of coaxial placement with a pair of parallel force constraints in this kind of mechanism is proposed to eliminate its instantaneity. The feasibility and rationality of the synthesis method are verified by instantaneous analysis. The method is also suitable for type synthesis of redundant 4, 5 and 6 DOF parallel mechanisms. © 2019 Journal of Mechanical Engineering.

关键词： Mechanisms

来源：评论

学校读者我要写书评

暂无评论

Dynamic Modeling Method of Spatial Passive Over-constrained parallel Mechanism Based on Newton Euler Method

引用

Jixie Gongcheng Xuebao/Journal of Mechanical Engineering 2020年第11期56卷 48-57页

作者： Li, Yongquan Guo, Yu Zhang, Yang Zhang, Lijie Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Qinhuangdao066004 China Key Laboratory of Advanced Forging & Stamping Technology and Science Yanshan University Ministry of Education of China Qinhuangdao066004 China Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control Yanshan University Qinhuangdao066004 China

The 4-RPTR four-degree-of-freedom space passive over-constrained (redundant constrained) parallel mechanism is taken as the research object, and the Newton Euler method combined with the complementary deformation coordination equation is used to analyze the dynamics. The number of dynamic equations based on Newton's Euler method is 78, but due to the existence of passive over-constraints of the mechanism, the unknown variables of the required solutions are 80. When the eight deformation coordination equations are added according to the method of planar over-constrained mechanism, it will be linearly related to the 78 equations built, resulting in the equations being unable to solve. Based on this, when proposing the dynamics modeling of passive over-constrained parallel mechanism, the reason for the passive over-constraint of the mechanism should be analyzed firstly. On this basis, adding the deformation of the member caused by the redundant constrained force (torque) and the position and posture error of the terminal platform as a complementary equation ensures that the equations are linearly independent and can be solved. To this end, the relationship between the deformation of the rod and the position and posture error of the terminal platform caused by the rotational joint restraining torque directly causing the redundant constraint is introduced, and eight deformation coordination equations are added, and six unknown variables are introduced, thereby obtaining 86 equations. Containing 86 unknowns, and the equations are linearly independent, the dynamic solution model of the mechanism is obtained. Based on matlab and adams software, the dynamics simulation of the mechanism is carried out. When the same motion trajectory is given at the terminal of the platform, the correctness of the dynamic model can be seen by comparing the driving force variation curves of the two methods. It provides a new idea for dynamic modeling of this type of space passive over-constrai

关键词： Dynamics

来源：评论

学校读者我要写书评

暂无评论

Mechanism Design and Walking Stability Study of (2UPS-U) +R Series-parallel Hybrid Bionic Wheel-Legged Quadruped robot*

Mechanism Design and Walking Stability Study of (2UPS-U) +R ...

引用

IEEE International Conference on robotics and Biomimetics

作者： Shanshan Li Hongbo Wang Dong Li Minghao Li Lianqing Li Yu Tian Jianye Niu Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System Yanshan University Qinhuangdao China Academy for Engineering & Technology Fudan University Shanghai China Hebei Provincial Key Laboratory of Parallel Robot and Mechatronic System and Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of Education of China Yanshan University Qinhuangdao China

In this paper, a bionic-based design of a series-parallel hybrid wheel-legged quadruped robot that can realize wheel-foot transformations is presented to achieve footed stable walking, and a method of measuring the static stability of the robot by the evaluation of the torque of the supporting leg rotor axis is proposed with the consideration of the robot's leg mass. Firstly, the whole robot position is solved; Secondly, the force on the robot during static walking is analyzed, and the stability of its static walking is also analyzed from the moment perspective; Finally, the stabilizing support region for static walking is solved, and the stabilizing support region for the robot in such a motion state is calculated. This paper provides high reference significance and value for the mechanism design and walking stability research of series-parallel hybrid wheel-legged quadruped robots.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Motion Characteristics Analysis of a Novel Spherical Two-degree-of-freedom parallel Mechanism

Research Square

引用

Research Square 2021年

作者： Ziming, Chen Chen, Xuechan Min, Gao Chen, Zhao Kun, Zhao Li, Yanwen School of Mechanical Engineering Yanshan University Hebei Qinhuangdao066004 China Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Hebei Qinhuangdao066004 China

In this paper, a novel two-degree-of-freedom (2DOF) spherical parallel mechanism(SPM) with symmetrical structure is proposed and analyzed. First, the models of forward kinematics and inverse kinematics are established based on D-H parameters, and the Jacobian matrix of the mechanism is obtained and verified. Second, the workspace of the mechanism is obtained according to inverse kinematics and link interference conditions. Next, rotational characteristics analysis shows that the end effector can achieve continuous rotation about an axis located in the mid-plane and passing through the rotation center of the mechanism. Moreover, the rotational characteristics of the mechanism are proved and motion planning is carried out. A numerical example is given to verify the kinematics analysis and motion planning. Finally, some variant mechanisms can be synthesized. This work lays the foundation for the motion control and practical application of this 2DOF SPM. © 2021, CC BY.

关键词： Motion planning

来源：评论

学校读者我要写书评

暂无评论

Design and Research of A Soft Hand Rehabilitation robot with Multiple Training Modes 3

Design and Research of A Soft Hand Rehabilitation Robot with...

引用

3rd International Conference on Computing, Networks and Internet of Things, CNIOT 2022

作者： Wang, Fuhao Wang, Hongbo Luo, Jingjing Kang, Xiaoyang Zhang, Xueze Chen, Li Pan, Qiqi Academy for Engineering & Technology Shanghai200433 China Yanshan University Parallel Robot and Mechatronic System Laboratory of Hebei Province Qinhuangdao China Intelligent Robot Engineering Research Center Ministry of Education Shanghai200433 China Shanghai Intelligent Robot Engineering Technology Research Center Shanghai200433 China Shanghai Clinical Research Center for Aging and Medicine Shanghai200040 China

ISBN: (纸本)9781665469104

There are many hemiplegic patients with hand dysfunction caused by stroke. Restoring hand function can effectively improve the quality of life of patients. Traditional rehabilitation training can improve hand strength and flexibility, but there are few medical staff and high workload, which may easily lead to unstable training effect. Therefore, this letter designed a soft hand rehabilitation robot with multiple training modes. By analyzing the natural movements of human fingers, the flexible exoskeleton finger and driving unit are designed. The kinematics of the finger are derived to achieve uniform changes in the angle of the finger joints. The hand rehabilitation robot can support multiple training modes such as individual finger training, five-finger collaborative training, and left-right hand symmetry training. Experiments show that the hand rehabilitation robot can carry out continuous and stable finger joint training, and has a good rehabilitation training effect. © 2022 IEEE.

关键词： Personnel training

来源：评论

学校读者我要写书评

暂无评论

Research on Variable Workspace of Continuum robot for Organ Protection and Multi-arm Cooperation 12

Research on Variable Workspace of Continuum Robot for Organ ...

引用

12th International Conference on CYBER Technology in Automation, Control, and Intelligent systems, CYBER 2022

作者： Wang, Fuhao Wang, Hongbo Luo, Jingjing Kang, Xiaoyang Zhang, Xueze Wang, Jiawei Pan, Qiqi Academy for Engineering and Technology Fudan University Shanghai200433 China Parallel Robot and Mechatronic System Laboratory of Hebei Province Yanshan University Qinhuangdao066004 China Intelligent Robot Engineering Research Center of Ministry of Education Shanghai Intelligent Robot Engineering Technology Research Center Shanghai200433 China Shanghai Clinical Research Center for Aging and Medicine Shanghai200040 China

ISBN: (数字)9781665472678

ISBN: (纸本)9781665472678

Minimally invasive surgery (MIS) has gradually become the preferred method of surgery due to its advantages of less trauma and faster recovery. However, the small and complex surgical area places high demands on the performance of the robot and the skill level of the doctor. In order to avoid the damage of other healthy organs with surgical instruments during the operation, a variable workspace of a continuum robot is designed in this paper. The information of the dynamic transformation of the surgical environment is used to continuously update the workspace of the continuum robot. For healthy vital organs, the workspace can actively shield its corresponding posture. Experiments have verified that for a variety of complex surgical scenarios, the variable workspace can simply and effectively implement the safety protection of healthy organs, and can avoid interference when multiple arms work together. © 2022 IEEE.

关键词： Surgical equipment

来源：评论

学校读者我要写书评

暂无评论

The stability performances improvement through kinematic and dynamic modeling of the hopping robots 10

The stability performances improvement through kinematic and...

引用

10th UKACC International Conference on Control, CONTROL 2014

作者： Bruja, Adrian Vladareanu, Luige Yu, Hongnian Wang, Hongbo Liu, Jingjing Bucharest Romania School of Design Engineering and Computing Bournemouth University Poole DorsetBH12 5BB United Kingdom Parallel Robot and Mechatronic System Laboratory of Hebei Province Key Lab. of Adv. Forging and Stamping Technol. and Sci. of Ministry of Education Yanshan University Qinhuangdao China

ISBN: (纸本)9781479950119

The paper presents an innovative design for a wheeled hopping robot. Our main objective was to obtain a stable and efficient robot, which can jump over obstacles and has the ability to reach a certain ledge. The innovative design of our robot has the capability to jump to a certain distance even with a zero initial velocity provided by the wheels movement. Also, we took into consideration the wind speed which can prevent our robot to reach the desired destination, and compensated with an initial velocity on the direction of movement. For testing we designed a simulation which had as inputs different initial conditions to test and present the jumping capability of our robot in different jumping conditions. In the end we provide a jump area which the robot can reach for certain initial conditions, so we can later chose the optimal one for reaching the target position. © 2014 IEEE.

关键词： Machine design

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：