检索结果-内蒙古大学图书馆

IEEE International Conference on control Science and Systems Engineering (CCSSE)

作者： Yue Zhang Peng Huang Pan Zhang Yawu Wang School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China

This paper proposes the modeling and tracking control methods for the dielectric elastomer actuator (DEA). A dynamic model of the DEA is built, which is composed of an asymmetric hysteresis model, a creep model and a linear system. To compensate the hysteresis and creep nonlinearities of the DEA, an inverse compensation feedforward controller (ICFC) is designed based on the creep model and the inverse of the asymmetric hysteresis model. Besides, an extended state observer (ESO) is designed to estimate the unmeasurable state of the DEA, as well as uncertainties including the modeling errors, parameter perturbations and external disturbances. Then, a sliding mode feedback controller (SMFC) is designed cooperating with the ICFC to realize the high precision tracking control of the DEA. The convergence of the ESO and the whole control system are proved through the Lyapunov method. Finally, some experiments are executed to verify the effectiveness of the proposed modeling and control methods.

关键词： Linear systems Uncertainty Creep control systems Modeling Adaptive control Feedforward systems

来源：评论

学校读者我要写书评

暂无评论

Hand Detection and Gesture Classification based on Transformer

Hand Detection and Gesture Classification based on Transform...

引用

Chinese automation Congress (CAC)

作者： Genghui Pei Chi Xu Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems School of Automation China University of Geosciences Engineering Research Center of Intelligent Technology for Geo-Exploration Ministy of Education Wuhan China Engineering Research Center of Intelligent Technology for Geo-Geo-Exploration Ministy of Education Wuhan China

Hand detection and gesture recognition are an important branch of artificial intelligence, which are widely used in daily life, such as interaction between human and machines, communication using signals, virtual reality and so on. In order to realize gesture recognition in unconstrained situations, we propose a novel end-to-end model based on Transformer, which can detect multiple hands in a picture. Our network can be roughly divided into the following three stages. In the first stage, we will extract feature maps of different layers by convolutional network from monocular RGB images. In the second stage, features are sent into the codec module based on Transformer, and hand detection is further carried out through multi-layer perceptrons with the decoding vectors as the input. In the third stage, we combine the attention weight maps obtained in the second step with the features of different layers in the first step to complete the gesture recognition task. From the experiment results, our network accurately identifies the positions of multiple hands in the picture and correctly recognizes hand gestures.

关键词： Solid modeling Codecs automation Gesture recognition Virtual reality Transformers Feature extraction

来源：评论

学校读者我要写书评

暂无评论

Dual-mode FMF to SOI chip edge coupler

Dual-mode FMF to SOI chip edge coupler

引用

Asia Communications and Photonics Conference and Exhibition (ACP)

作者： Weilun Zhang Mengyuan Ye Yunlong Li School of Automation China University of Geosciences Wuhan China Hubei key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China

Dual-mode edge coupler for few mode fiber (FMF) to silicon chip is proposed. LP 01 and LP 11 d coupler in simulation.

ISBN: (纸本)9781665410953

Dual-mode edge coupler for few mode fiber (FMF) to silicon chip is proposed. LP 01 and LP 11 d coupler in simulation.

关键词： Multiplexing Couplings Simulation Optical fiber couplers Crosstalk Couplers Silicon

来源：评论

学校读者我要写书评

暂无评论

High Q silicon micro-ring resonator based on elliptical bending waveguides

High Q silicon micro-ring resonator based on elliptical bend...

引用

Asia Communications and Photonics Conference and Exhibition (ACP)

作者： Yunlong Li Mengyuan Ye Weilun Zhang Li Liu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China

By adopting elliptical bending waveguides, a silicon micro-ring resonator with footprint ~440 11m and Q factor ~ 6.2×10 6 is proposed and demonstrated.

ISBN: (纸本)9781957171005

By adopting elliptical bending waveguides, a silicon micro-ring resonator with footprint ~440 11m and Q factor ~ 6.2×10 6 is proposed and demonstrated.

关键词： Q-factor Couplings Asia Optical resonators Bending Silicon Optical fiber communication

来源：评论

学校读者我要写书评

暂无评论

A Subspace-Based Non-Dominated Subset Selection Method

A Subspace-Based Non-Dominated Subset Selection Method

引用

Congress on Evolutionary Computation

作者： Qingshan Tan Changhe Li Sanyou Zeng Shengxiang Yang School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China School of Mechanical Engineering and Electronic Information China University of Geosciences Wuhan China School of Computer Science and Informatics De Montfort University Leicester United Kingdom

Environmental selection is an important process in multi-objective evolutionary algorithms (MOEAs). As the evolution progresses, the number of non-dominated solutions increases. This paper is focused on selecting a subset from excess non-dominated solutions for evolutionary or the final output. However, traditional selection methods in classical MOEAs encounter difficulties when dealing with candidate solutions that possess irregular topologies. Although the distance-based subset selection methods are not sensitive to the topologies of the candidate points, they have significant room for reducing computational complexity. In order to address the above issues, a subspace selection method is proposed in this paper. It partitions the objective space into multiple subspaces that have comparable volumes and shapes. The maximal minimum distance of each solution is considered to ensure that the sparsest solution is always chosen first. To save computational costs, only the solutions in the neighboring subspaces are taken into account. The experimental results demonstrate that the proposed subspace selection method outperforms classical selection methods in solving problems with various shapes of the Pareto front.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Robust control of Feeding Speed for Coal Mine Tunnel Drilling Machines

Robust Control of Feeding Speed for Coal Mine Tunnel Drillin...

引用

IEEE International Conference on Industrial Technology (ICIT)

作者： Xiao Liu Luefeng Chen Min Wu Weihua Cao Chengda Lu Witold Pedrycz School of Automation China University of Geosciences Wuhan China School of Automation the Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems and the Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton Canada Department of Electrical and Computer Engineering University of Alberta Edmonton AB Canada Systems Research Institute Polish Academy of Sciences Warsaw Poland Department of Computer Engineering Istinye University Sariyer/Istanbul Turkey

ISBN: (数字)9798350340266

ISBN: (纸本)9798350340273

Changes in coal seam hardness cause fluctuations in the feed resistance at the drill bit during the drilling process, leading to unstable feeding speed. This paper proposes a robust dynamic output feedback controller to suppress disturbances caused by the variations in coal seam hardness in the feed system. Firstly, an unknown parameter measuring coal seam hardness is introduced, and an uncertain model of the feeding system is established based on the finite element model of the drill string. By designing weighted functions based on industrial field requirements and constructing a generalized plant, the controller achieves loop shaping, reducing the low-frequency impact of coal seam hardness variations on the feed system and suppressing the systems resonance peak. Simulation results demonstrate that the controller effectively suppresses parameter variations and external disturbances caused by changes in coal seam hardness, achieving stable control of the drilling speed.

关键词： Drilling Robust control Uncertainty Robust stability Simulation Coal Resonance

来源：评论

学校读者我要写书评

暂无评论

Fast accurate position control of light-responsive liquid crystal elastomer actuator

Fast accurate position control of light-responsive liquid cr...

引用

Asian control Conference

作者： Xinyu Nie Jundong Wu Yawu Wang Chun-Yi Su Daiki Sato Jinhua She School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Gina Cody School of Engineering and Computer Science Concordia University Montreal Quebec Canada Laboratory for Future Interdisciplinary Research of Science and Technology (FIRST) Tokyo Institute of Technology Yokohama Kanagawa Japan The School of Engineering Tokyo University of Technology Tokyo Japan

ISBN: (数字)9789887581598

ISBN: (纸本)9798331540845

Light-responsive liquid crystal elastomers (LCEs) are promising for soft robot actuators due to their ability to respond to light stimuli and produce deformation. In order to realize their application in soft robots, fast and accurate position control is essential. Based on the intrinsic physical nature of LCE actuator's deformation, a terminal sliding mode controller (TSMC) is designed to efficiently adjust the temperature of the actuator, thus directly controlling the actuator deformation. In order to achieve the target temperature, a prediction model is established to predict the target temperature corresponding to the target displacement. Moreover, a proportional integration controller is applied to eliminate model errors and disturbances. The feasibility of the control strategy is experimentally verified, and compared with conventional PID controller. The results prove that the proposed control strategy can achieve fast and accurate control of displacement.

关键词： Heating systems Actuators Accuracy Deformation Position control Process control Elastomers

来源：评论

学校读者我要写书评

暂无评论

Multimodal Emotion Recognition Based on Multi-Scale Facial Features and Cross-Modal Attention 26

Multimodal Emotion Recognition Based on Multi-Scale Facial F...

引用

26th International Conference on Industrial Technology, ICIT 2025

作者： Bao, Chengao Chen, Luefeng Li, Min Wu, Min Pedrycz, Witold Hirota, Kaoru School of Automation China University of Geosciences Wuhan430074 China School of Automation Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China University of Alberta Department of Electrical and Computer Engineering EdmontonABT6R 2G7 Canada Tokyo Institute of Technology Yokohama226-8502 Japan Tokyo Institute of Technology Tokyo226-8502 Japan

ISBN: (纸本)9798331521950

A multi-modal emotion recognition method based on facial multi-scale features and cross-modal attention (MS-FCA) network is proposed. The MSFCA model improves the traditional single-branch ViT network into a two-branch ViT architecture by using classification tokens in each branch to interact with picture embeddings in the other branch, which facilitates effective interactions between different scales of information. Subsequently, audio features are extracted using ResNet18 network. The cross-modal attention mechanism is used to obtain the weight matrices between different modal features, making full use of inter-modal correlation and effectively fusing visual and audio features for more accurate emotion recognition. Two datasets are used for the experiments: eNTERFACE'05 and REDVESS dataset. The experimental results show that the accuracy of the proposed method on the eNTERFACE'05 and REDVESS datasets is 85.42% and 83.84% respectively, which proves the effectiveness of the proposed method. © 2025 IEEE.

关键词： Modal analysis

来源：评论

学校读者我要写书评

暂无评论

Tracking Performance of Networked Systems with Limited Bandwidth and Colored Noise

Tracking Performance of Networked Systems with Limited Bandw...

引用

Chinese automation Congress (CAC)

作者： Bin Zhang Xiaowei Jiang Li Sun Xianhe Zhang School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Key Laboratory of System Control and Information Processing Ministry of Education Shanghai China School of Statistics and Mathematics Zhongnan University of Economics and Law Wuhan China School of Electrical Engineering and Automation Hubei Normal University Huangshi China

This study investigated the optimal tracking performance (OTP) of multi-input multi-output (MIMO), discrete- time networked control systems (NCSs). The limits of tracking performance (TP) under the influences of bandwidth, encoding- decoding, and additive coloured Gaussian noise (ACGN) are derived using the techniques of coprime decomposition and all-pass decomposition. The results reveal the negative impact of non-minimum phase (NMP) zeros and unstable poles of the plant as well as network communication constraints on the TP of NCSs. Finally, a numerical simulation is discussed and verifies our conclusions.

关键词： Networked control systems Gaussian noise Bandwidth Numerical simulation Downlink Decoding Colored noise

来源：评论

学校读者我要写书评

暂无评论

Circulating Load Ratio Prediction Model Based on Clustering Sag Milling Operating Conditions

SSRN

引用

SSRN 2024年

作者： Liao, Zhenhong Xu, Ce Chen, Wen Wang, Feng She, Jinhua School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China Department of Mineral Resources Development and Utilization Changsha Research Institute of Mining and Metallurgy CO. LTD. Changsha410012 China School of Engineering Tokyo University of Technology Tokyo192-0982 Japan

Grinding in mineral processing is used to control the ore at the technically feasible and economically optimum particle size to achieve mineral liberation for separation. A circulating-load ratio (CLR) during a semi-autogenous grinding (SAG) milling process is critical for controlling particle size and energy consumption. This paper presents a CLR-prediction model based on clustering SAG milling operating conditions. First, operating parameters affecting the CLR are identified by comprehensively analyzing the complex mechanism and characteristics of a typical industrial SAG milling ***, a method is developed to cluster operating conditions of the SAG milling process based on the power consumption and CLR of the process. The method reveals the actual physical significance of each operating condition. Then, the support vector regression (SVR) is used to model the CLR in each operating condition. After that, a distance-based model integration strategy is designed to determine the weights of each SVR model to predict the CLR. Finally, integrating the SVR submodels yields a CLR prediction model. Actual run data demonstrated the accuracy and effectiveness of the model in predicting CLR. This method has significant practical value for improving SAG milling efficiency and is applicable to other complex industrial processes. © 2024, The Authors. All rights reserved.

关键词： Particle size

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：