检索结果-内蒙古大学图书馆

Chinese control Conference (CCC)

作者： Shuhan He Gang Yu Yongbo Li Fengyu Zhang Wangyong He School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation Complex Systems Wuhan China Huaxin Cement Technology Management (Wuhan) Co. Ltd Wuhan China

The anti-sway issue with crane systems is discussed in this essay. Because cranes are undriveable and nonlinear, implementing anti-sway controllers becomes much more challenging. This work suggests a crane anti-sway controller that uses feedback linearization(FL) in conjunction with the Equivalent-Input-Disturbance (EID) technique to address the issues. to reduce the problem that the feedback linearization largely relies on the model's accuracy. The crane system is first treated as a linear system, after which the unmodeled disturbances, nonlinear components, and external disturbances of the system are treated as the total disturbances of the system, and the effects of these disturbances are then compensated for using disturbance estimation. Finally, simulation experiments confirm that the maximum steady-state fluctuations of the position and angle of the anti-sway controller based on the equivalent input disturbance method and the feedback linearization method are 14 and 6.85 percent, respectively, of those estimated without disturbances. This demonstrates the potency of this approach.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Distributed Conditional Gradient Algorithm for Two-Network Saddle-point Problem

Distributed Conditional Gradient Algorithm for Two-Network S...

引用

第34届中国控制与决策会议

作者： Jie Hou Xianlin Zeng Key Laboratory of Intelligent Control and Decision of Complex Systems School of AutomationBeijing Institute of Technology

We consider a two-network saddle-point problem with constraints,whose projections are *** propose a projection-free algorithm,which is referred to as Distributed Frank-Wolfe Saddle-Point algorithm（DFWSP）,which combines the gradient tracking technique and Frank-Wolfe *** prove that the algorithm achieves O（1/k） convergence rate for strongly-convex-strongly-concave saddle-point *** empirically shows that the proposed algorithm has better numerical performance than the distributed projected saddle-point algorithm.

关键词： Saddle-Point Problem Distributed Algorithm Projection-Free Method Convergence Rate

来源：评论

学校读者我要写书评

暂无评论

A Gaze-Guided Human Locomotion Intention Recognition and Volitional control Method for Knee-Ankle Prostheses

引用

IEEE Transactions on Cognitive and Developmental systems 2025年

作者： Chen, Xinxing Chen, Zhaokai Wang, Yuxuan Yin, Shucong Chen, Chuheng Huang, Jian Fu, Chenglong Huazhong University of Science and Technology Key Laboratory of Image Processing and Intelligent Control Hubei Key Laboratory of Brain-inspired Intelligent Systems School of Artificial Intelligence and Automation Wuhan430074 China Southern University of Science and Technology Guangdong Provincial Key Laboratory of Human-Augmentation and Rehabilitation Robotics in Universities Shenzhen518055 China Shanghai Jiaotong University Shanghai China

This paper presents a novel gaze-guided volitional control method for knee-ankle prostheses, designed to enhance the precision and intuitiveness of prosthetic control in complex locomotion tasks. The method utilizes an eye-tracking system coupled with an RGBD camera to estimate 3D gaze points, which are then used to construct a gaze attention map. This map serves as the basis for predicting human locomotion intentions, enabling the prosthesis to accurately step on the intended foot placement. Experimental validation was conducted with both a healthy subject and an amputee subject, focusing on level-ground walking and stair ascent tasks. The results demonstrated that the prosthesis could achieve precise foot placement, with a mean error of 1.22 cm ± 3.14 cm for the healthy subject and 3.40 cm ± 0.66 cm for the amputee subject during level-ground walking. In stair ascent tasks, the system successfully adapted to various gait patterns, with the prosthetic joint angles closely matching natural human movements. The proposed method also effectively reduced the root mean square error (RMSE) of 3D gaze estimation to 2.70 cm, 2.63 cm, and 1.97 cm along the x, y, and z axes, respectively. These findings indicate that the gaze-guided volitional control method not only enhances the functionality of knee-ankle prostheses but also offers a more intuitive interface for users, aligning prosthetic actions with the user’s visual focus and intentions. © 2016 IEEE.

关键词： Knee prostheses

来源：评论

学校读者我要写书评

暂无评论

Geometry Problem Solving Based on Counter-Factual Evolutionary Reasoning 19

Geometry Problem Solving Based on Counter-Factual Evolutiona...

引用

19th IEEE International Conference on automation Science and Engineering, CASE 2023

作者： Song, Bing Xiong, Gang Shen, Zhen Zhu, Fenghua Lv, Yisheng Ye, Peijun Institute of Automation Chinese Academy of Sciences The State Key Laboratory of Management and Control for Complex Systems Beijing China School of Artificial Intelligence University of Chinese Academy of Sciences Beijing100049 China Institute of Automation Chinese Academy of Sciences The Beijing Engineering Research Center of Intelligent Systems and Technology China Chinese Academy of Sciences The Guangdong Engineering Research Center of 3D Printing and Intelligent Manufacturing The Cloud Computing Center Dongguan523808 China Qingdao Academy of Intelligent Industries Intelligent Manufacturing Center Qingdao266000 China

ISBN: (纸本)9798350320695

As a representative topic in natural language processing and automated theorem proving, geometry problem solving requires an abstract problem understanding and symbolic reasoning. A major challenge here is to find a feasible reasoning sequence that is consistent with given axioms and the theorems already proved. Most recent methods have exploited neural network-based techniques to automatically discover eligible solving steps. Such a kind of methods, however, is greatly impacted by the expert solutions for training. To improve the accuracy, this paper proposes a new method called counterfactual evolutionary reasoning, which uses a generative adversarial network to generate initial reasoning sequences and then introduces counterfactual reasoning to explore potential solutions. By directly exploring theorem candidates rather than the neural network selection, the new method can sufficiently extend the searching space to get a more appropriate reasoning step. Through comparative experiments on the recent proposed Geometry3k, the largest geometry problem solving dataset, our method generally achieves a higher accuracy than most previous methods, bringing an overall improvement about 4.4% compared with the transformer models. © 2023 IEEE.

关键词： Geometry

来源：评论

学校读者我要写书评

暂无评论

RGB-infrared fusion tracking algorithm based on Siamese network 2

RGB-infrared fusion tracking algorithm based on Siamese netw...

引用

2nd International Conference on Computer Vision, Image, and Deep Learning

作者： Li, Ruyou Cui, Wennan Wang, Zhiyong Zhang, Jingjing School of Automation China University of Geosciences Wuhan430074 China Key Laboratory of Intelligent Infrared Perception Chinese Academy of Sciences Hubei key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education

ISBN: (数字)9781510646827

ISBN: (纸本)9781510646810

The target tracking method based on RGB image is affected by many factors such as light and haze weather, so it is difficult to distinguish the tracking target from the background, and it is easy to lead to the drift or even loss of the tracking target. Target tracking based on infrared images is not affected by light, haze and other illumination factors, but the target's color, texture and other characteristic information will be missing. Therefore, in order to obtain the target's color, texture and other characteristic information in a poorly illuminated environment, while achieving accurate and fast tracking of the object, this paper proposes a RGB and infrared image fusion tracking method based on a deep convolutional network. Firstly, the fusion method of RGB and infrared images is studied;secondly, a target tracking network based on the Siamese network is established to extract the image convolution features of the target template and the current target;finally, the response map is calculated by the deep cross-correlation module. At last, the performance test of the target tracking algorithm is carried out on the VOT2019RGBT data set. Experimental results show that the algorithm can effectively solve the problem of target tracking when the target is partially occluded, the tracking scene has no suitable illumination or the light changes strongly, and it is of great significance to improve the accuracy of target tracking under complex backgrounds. © 2021 SPIE.

关键词： Image fusion

来源：评论

学校读者我要写书评

暂无评论

A Novel YJQR-LSTM Model for Nonparametric Probabilistic Sustainable Agriculture Wind Power Forecasting Based on intelligent IoT

引用

IEEE Internet of Things Journal 2024年

作者： Wang, Jie Jiang, Junhui Chen, Xinlong Cai, Defu Wu, Yue Lu, Renzhi School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan430074 China Harbin Engineering University College of Computer Science and Technology Harbin150001 China State Grid Hubei Electric Power Research Institute Hubei Wuhan430079 China School of Technology State Key Laboratory of Efficient Production of Forest Resources Key Laboratory of National Forestry and Grassland Administration on Forestry Equipment and Automation Beijing Forestry University Beijing100083 China Key Laboratory of Image Processing and Intelligent Control School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan430074 China Key Laboratory of Industrial Internet of Things and Networked Control Ministry of Education Chongqing400065 China State Key Laboratory of Mechanical Transmission for Advanced Equipment Chongqing University Chongqing400044 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China

Energy costs associated with the consumption of non-renewable energy sources have become an important issue in improving the international competitiveness of agriculture. Wind power, as a renewable energy source, can replace non-renewable energy sources to reduce energy costs and improve the sustainability of agricultural. However, the inherent intermittency, randomness, and volatility within weather conditions and wind speed presents a substantial challenge in accurately predicting wind power generation. This work proposes a novel YJQR-LSTM algorithm that leverages Yeo-Johnson quantile regression (YJQR) with a long short-term memory (LSTM) network for nonparametric probabilistic forecasting of wind power generation via the intelligent Internet of Things. First, an improved YJQR model based on the YJ transformation is designed to obtain a more precise characterization of wind uncertainty, providing a more flexible probability density function for wind power generation. Then, utilizing the unique structure of the LSTM network to learn the parameters of the YJQR model, temporal features can be extracted from time series data. To mitigate the impact of outliers in the raw data on accuracy and improve computational efficiency, a novel logarithmic likelihood function is developed as the loss function utilized in the training phase. The effectiveness of the proposed algorithm is validated using a real-world dataset from five wind farms from the Global Energy Forecasting Competition. Numerical results demonstrate that the algorithm provides more accurate wind power prediction results in complex wind power data environments, which is important for making full use of wind energy and thus reducing the consumption of non-renewable energy in agriculture. © 2024 IEEE.

关键词： Wind forecasting

来源：评论

学校读者我要写书评

暂无评论

Current Problems and Solutions of Industrial control Network Intrusion Detection: A Brief Survey

Current Problems and Solutions of Industrial Control Network...

引用

2022 IEEE International Conference on Real-Time Computing and Robotics, RCAR 2022

作者： Jiang, Tianyu Zhang, Chen Wang, Rui Chai, Senchun Institute of Automation Chinese Academy of Sciences and University of Science and Technology Beijing China Beijing Institute of Technology China Institute of Automation Chinese Academy of Sciences State Key Laboratory of Management and Control for Complex Systems China Institute of Intelligent Information Processing and Control Beijing Institute of Technology China

ISBN: (数字)9781665469838

ISBN: (纸本)9781665469838

With the advancement of industrial intelligence, the Industrial Internet has been widely used in energy, manufacturing and other important industries. In recent years, security incidents have occurred frequently in industrial control network, which means that maintaining industrial control network security has become more and more important. Intrusion detection technology can actively detect abnormal behavior in the network, and is an important means to ensure the security of industrial control networks. Presently, the intrusion detection technology of industrial control network has problems such as extreme imbalance of classes and redundant interference of traffic characteristics. This paper analyzes these problems and clarifies the existing solutions for different problems in principle. © 2022 IEEE.

关键词： Network security

来源：评论

学校读者我要写书评

暂无评论

Speech Emotion Recognition Based on Syllable-Level Feature Extraction

SSRN

引用

SSRN 2023年

作者： Rehman, Abdul Liu, Zhen-Tao Wu, Min Cao, Wei-Hua Jiang, Cheng-Shan School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

Speech emotion recognition systems have high computational requirements for deep learning models and low generalizability mainly because of the poor reliability of emotional measurements across multiple corpora. To solve these problems, we present a speech emotion recognition system based on a reductionist approach of decomposing and analyzing syllable-level ***-spectrogram of an audio stream is decomposed into syllable-level components, which are then analyzed to extract statistical features. The proposed method uses formant attention, noise-gate filtering, and rolling normalization contexts to decrease contextual differences and increase focus the attention on the structure of a formant. A set of syllable-level formant features is extracted and fed into a single hidden layer neural network that makes predictions for each syllable as opposed to the conventional approach of using a sophisticated deep learner to make sentence-wide *** syllable level predictions help to lower the aggregated error in utterance level cross-corpus predictions. The experiments on IEMOCAP (IE), MSP-Improv (MI), and RAVDESS (RA) databases show that the method archives better than the state-of-the-art cross-corpus unweighted accuracy of 47.6% for IE to MI and 56.2% for MI to IE. © 2023, The Authors. All rights reserved.

关键词： Forecasting

来源：评论

学校读者我要写书评

暂无评论

A Novel Ceramic Surface Based Constant Force control Method for Flatness Inspection

SSRN

引用

SSRN 2023年

作者： Chen, Xin Gao, Xu Zhou, Yang Qin, Lang School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

A constant force control method of the robot based on a force sensor is proposed for the difficult point of high difficulty and low accuracy of ceramic surface flatness inspection. This paper proposed a method that combines a constant impedance controller for normal contact force with a posture compliance controller. The method decomposes force control and position control orthogonally to simplify the complex three-dimensional surface model of ceramics. The method solves the problem that the end-effector is difficult to be perpendicular to the contact surface due to the change of ceramic surface shape. Moreover, the proposed method can also detect whether the ceramic surface is flat or not by the change of the force sensor's indication and the change of the actual end position of the robot arm. Finally, the defect detection experiments are conducted on a plane and on a complex surface, respectively. The experiments demonstrate the adaptability and fast convergence of the method proposed in this paper, which meets the needs of high precision and fast response of industrial processes. © 2023, The Authors. All rights reserved.

关键词： Force control

来源：评论

学校读者我要写书评

暂无评论

Interactive multiobjective evolutionary algorithm based on decomposition and compression

引用

Science China(Information Sciences) 2021年第10期64卷 166-181页

作者： Lu CHEN Bin XIN Jie CHEN School of Automation Beijing Institute of Technology State Key Laboratory of Intelligent Control and Decision of Complex Systems

Many real-world optimization problems involve multiple conflicting objectives. Such problems are called multiobjective optimization problems(MOPs). Typically, MOPs have a set of so-called Pareto optimal solutions rather than one unique optimal solution. To assist the decision maker(DM) in finding his/her most preferred solution, we propose an interactive multiobjective evolutionary algorithm(MOEA)called iDMOEA-εC, which utilizes the DM's preferences to compress the objective space directly and progressively for identifying the DM's preferred region. The proposed algorithm employs a state-of-the-art decomposition-based MOEA called DMOEA-εC as the search engine to search for solutions. DMOEA-εC decomposes an MOP into a series of scalar constrained subproblems using a set of evenly distributed upper bound vectors to approximate the entire Pareto front. To guide the population toward only the DM's preferred part on the Pareto front, an adaptive adjustment mechanism of the upper bound vectors and two-level feasibility rules are proposed and integrated into DMOEA-εC to control the spread of the population. To ease the DM's burden, only a small set of representative solutions is presented in each interaction to the DM,who is expected to specify a preferred one from the set. Furthermore, the proposed algorithm includes a two-stage selection procedure, allowing to elicit the DM's preferences as accurately as possible. To evaluate the performance of the proposed algorithm, it was compared with other interactive MOEAs in a series of experiments. The experimental results demonstrated the superiority of iDMOEA-εC over its competitors.

关键词： multiobjective optimization interactive decision making preference incorporation decomposition compression

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：