检索结果-内蒙古大学图书馆

arXiv 2024年

作者： Yang, Ruiping Liu, Huan Ge, Jian Chugo, Daisuke Dong, Haobin School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China Faculty of Engineering Kwansai Gakuin University Osaka669-1330 Japan

Fluxgate sensors are widely used in the field of low frequency and weak vector magnetic field measurement because of their good performance, such as high resolution and low power consumption. However, during the long-term continuous observation, the drift errors of the fluxgate sensor will occur due to the variable ambient temperature. This paper proposes a temperature compensation method for fluxgate sensors based on polynomial fitting. First, a physical model of the temperature & fluxgate sensor was established on the COMSOL Multiphysics simulation platform, and the influence of temperature on the measurement performance of the fluxgate sensor was analyzed. Second, according to the existing temperature-magnetic field data, a temperature compensation model of the fluxgate sensor was constructed. And compared it with other temperature compensation method, the result shows that the proposed temperature compensation method is relatively simple and can better achieve real-time compensation for sensor application scenarios. Finally, to verify the effectiveness of the proposed method, numerous laboratory experiments were *** temperature drift is reduced from more than 500 nT before compensation to about 1 nT. The results show that the proposed method has a good temperature compensation effect on the data measured by the fluxgate sensor within a variable temperature background. Copyright © 2024, The Authors. All rights reserved.

关键词： Simulation platform

来源：评论

学校读者我要写书评

暂无评论

Cascade conditional generative adversarial nets for spatial-spectral hyperspectral sample generation

引用

Science China(Information Sciences) 2020年第4期63卷 81-96页

作者： Xiaobo LIU Yulin QIAO Yonghua XIONG Zhihua CAI Peng LIU School of Automation China University of Geosciences (Wuhan) Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems School of Computer Science China University of Geosciences (Wuhan) The Beibu Gulf Big Data Resources Utilization Laboratory Beibu Gulf University

Sample generation is an effective way to solve the problem of the insufficiency of training data for hyperspectral image classification. The generative adversarial network（GAN） is one of the popular deep learning methods, which utilizes adversarial training to generate the region of samples based on the required class label. In this paper, we propose cascade conditional generative adversarial nets for hyperspectral image complete spatial-spectral sample generation, named C;GAN. The C;GAN includes two stages. The stageone model consists of the spatial information generation with a window size that entails feeding random noise and the required class label. The second stage is the spatial-spectral information generation that generates spectral information of all bands in the spatial region by feeding the label regions. The visualization and verification of generated samples based on the Pavia University and Salinas datasets show superior performance, which demonstrates that our method is useful for hyperspectral image classification.

关键词： hyperspectral image sample generation generative adversarial nets(GAN) deep learning spatial-spectral information

来源：评论

学校读者我要写书评

暂无评论

Optimal consensus control for partially unknown multi-agent systems with switching communication topology*

引用

IFAC-PapersOnLine 2023年第2期56卷 1210-1216页

作者： Wenpeng He Xin Chen Menglin Zhang Yipu Sun Akinori Sekiguchi Jinhua She School of Automation China University of Geosciences Wuhan 430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan 430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan 430074 China School of Engineering Tokyo University of Technology Hachioji Tokyo 192-0982 Japan

Since the local neighborhood tracking error system for switching multi-agent systems (MASs) is time-varying, the existing optimal consensus method for fixed MASs cannot be used in switching MASs. This paper proposes a new approach to solve the optimal consensus problems of linear switching MASs. Firstly, a new augment local neighborhood tracking error (ALNTE) system, which is based on the joint communication topology, is developed to construct the control object, and the open-loop estimation method is used to estimate the ALNTE for individuals. Secondly, based on the ALNTE system, the performance index is designed, and the value iteration method is used to solve the coupled Hamilton-Jacobi-Bellman equations and obtain the optimal control. Finally, theoretical analysis is given to prove the learning stability and control stability of the value iteration method, and a numerical simulation is used to verify the effectiveness of the proposed method.

关键词： Switching topology multi-agent systems (MASs) optimal control value iteration augment local neighborhood tracking error (ALNTE)

来源：评论

学校读者我要写书评

暂无评论

An Attention Detection System Based on Gaze Estimation Using Self-supervised Learning 8th

An Attention Detection System Based on Gaze Estimation Usin...

引用

8th International Workshop on advanced Computational Intelligence and intelligent Informatics, IWACIII 2023

作者： Zeng, Xiang-Yu Zhang, Bo-Yang Liu, Zhen-Tao School of Future Technology China University of Geosciences Wuhan430074 China School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

ISBN: (纸本)9789819975891

With the rapid development of online education around world, it becomes difficult for teachers to evaluate the effect of learning during the online class. To solve this problem, an attention detection system based on gaze estimation using self-supervised learning is proposed. Self-supervised learning is used to train the gaze estimation network and it achieved an average gaze angle error of 6. 5∘ on the MPIIFaceGaze dataset. Cross dataset testing was performed by 5 test subjects in the RT-GENE dataset and all samples in the Columbia dataset, in which achieved average gaze angle error 13. 8∘ and 5. 5∘. It is found that the network has good cross dataset generalization performance, but it is susceptible to factors such as feature occlusion and low image clarity. Then, we developed an attention detection system which has functions of unmanned detection, eye state detection, and gaze detection. Online classroom experiments were conducted to verify the effectiveness of the proposed method, in which the average accuracy of the detection of distraction is around 60%. © 2024, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

关键词： Supervised learning

来源：评论

学校读者我要写书评

暂无评论

Disturbance Observer-Based control of Weight on Bit in Drilling Process with formation Variation

Disturbance Observer-Based Control of Weight on Bit in Drill...

引用

Asian control Conference

作者： Shipeng Chen Wangnian Li Chengda Lu Yang Zhou Weihua Cao Min Wu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China CCTEG Xi'an Research Institute (Group) Co. Ltd. Xi'an China

ISBN: (数字)9789887581598

ISBN: (纸本)9798331540845

In deep geological drilling, encountering various formations is inevitable. formation changes can lead to fluc-tuations in the weight on bit due to the bit-rock interaction. This paper proposes a disturbance observer-based weight on bit control system to mitigate the adverse effects of formation changes on system performance. First, an axis-torsion coupled dynamic model is established, and the relationship between the two dimensions is analyzed. The validity of the model is confirmed through comparison with field data collected from a geothermal well drilling operation. Then, a disturbance observer is designed to estimate and compensate for the disturbance at the control input, thereby reducing weight on bit fluctuations caused by formation variations. Simulation results considering formation variation during drilling verify the effectiveness of the proposed method.

关键词： Drilling Simulation System performance Geology Process control control systems Disturbance observers

来源：评论

学校读者我要写书评

暂无评论

A Trajectory Generation Method Based on control Points and Improved Whale Algorithm Optimization Algorithm for Solving Unmanned Aerial Vehicle Path Planning Problems

SSRN

引用

SSRN 2023年

作者： Li, Bingyu Gan, Chao Zhu, Yifeng Cao, Wei-Hua Wuhan430074 China Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

Three-dimensional trajectory planning is crucial for improving the safety and operational efficiency of unmanned aerial vehicle(UAV). However, it is hard to plan a suitable path in complex real-world environments. To overcome this challenge, this paper introduces a novel trajectory planning method based on control point modelling and an advanced whale optimisation algorithm (WOA). Firstly, a trajectory modeling method based on control point interpolation algorithm was proposed, which constrains the one-dimensional dimensions of 3D points, reducing the complexity of the traditional modelling methods and increasing the efficiency of trajectory generation. After that, an advanced adaptive multi-population cooperative whale optimisation algorithm (AMCWOA) has been proposed to enhance the problem-solving capabilities of the algorithm in complex environments. Through a population evolution stage evaluation strategy (ESE), this algorithm dynamically divides the population size, thereby balancing the problem-solving breadth and precision of the algorithm. It increases algorithm accuracy and convergence speed in solving trajectory planning problems. It is imperative to emphasis that the evaluation strategy in the evolution stage purposefully addresses the blindness of multi-population evolution algorithms when dividing populations. Finally, multiple function sets are utilized to test the solving performance of the algorithm and the simulations in multiple environments are designed to demonstrate the performance in UAV path planning. The experimental comparison results demonstrate that the proposed population evolution stage evaluation strategy (ESE) and population information sharing strategy can effectively increase the search range and convergence accuracy of the algorithm in generating high-quality paths and optimising test functions. © 2023, The Authors. All rights reserved.

关键词： Efficiency

来源：评论

学校读者我要写书评

暂无评论

Skeleton-Based Multi-Stream Adaptive Graph Convolutional Network for Indoor Scene Action Recognition

Skeleton-Based Multi-Stream Adaptive Graph Convolutional Net...

引用

2023 China automation Congress, CAC 2023

作者： Li, Jiazhuo Chen, Luefeng Li, Min Wu, Min Pedrycz, Witold Hirota, Kaoru The School of Automation The Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems The Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education China University of Geosciences Wuhan430074 China The Department of Electrical and Computer Engineering University of Alberta EdmontonABT6G 2R3 Canada The Systems Research Institute Polish Academy of Sciences Warsaw00-901 Poland The Department of Computer Engineering Istinye University Sariyer Istanbul34396 Turkey The Tokyo Institute of Technology Tokyo226-8502 Japan

ISBN: (纸本)9798350303759

With the rapid advances in computer vision, human action recognition has gradually received attention, but the current methods still exhibit some problems in indoor environments. The human skeleton, as the framework of human motion, contains high-quality actional feature information, and the skeleton-based action recognition method effectively avoid the interference of interior background noise and has advantages in indoor action recognition. The outstanding effect of graph convolutional networks on graph structure data processing has led to its rapid development and wide application in skeleton-based action recognition. Second-order skeletal information also contains a large number of actional features but is not effectively utilized. The artificial predefined topology of the human skeleton map has limitations, and cannot reflect the interaction between limbs. To solve the above problems, this article designs an adaptive weighted multi-stream graph convolutional network (AM-GCN) based on skeletal information, using an attention mechanism to enhance the network's ability to extract actional features, and an adaptive layer to make the construction graph more flexible, incorporating second-order skeletal features through a dual-stream architecture. In this article, the NTU-RGB+D dataset has been used for the experiments, the results show that the method in this article has good results. © 2023 IEEE.

关键词： Convolution

来源：评论

学校读者我要写书评

暂无评论

Plate Shape Prediction Based on Data-Driven in Roll Quenching Process

Plate Shape Prediction Based on Data-Driven in Roll Quenchin...

引用

2023 China automation Congress, CAC 2023

作者： Hu, Liu Chen, Luefeng Hu, Jie Wu, Min Pedrycz, Witold Hirota, Kaoru School of Automation Ministry of Education China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems The Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China University of Alberta Department of Electrical and Computer Engineering EdmontonABT6R 2G7 Canada Systems Research Institute Polish Academy of Sciences Warsaw00-901 Poland Istinye University The Department of Computer Engineering Istanbul Sariyer34396 Turkey Tokyo Institute of Technology Tokyo Yokohama226-8502 Japan

ISBN: (纸本)9798350303759

In the process of steel plate production, predicting the plate shape is of great significance for producing high-quality and consistently stable plate shapes. This paper presents a model that predicts both the defect types and flatness of the plate, providing theoretical support for setting process parameters in roller quenching production. First, the parameters of the quenching process are analyzed to identify their characteristics. Then, the K-Means clustering algorithm and correlation analysis are employed to process the quenching process parameters. A gradient boosting decision tree (GBDT) model is used to predict the defect types and flatness of the steel plates. Finally, industrial production data is utilized for experimental validation. The obtained experimental results verify the reliability of the proposed method. © 2023 IEEE.

关键词： Decision trees

来源：评论

学校读者我要写书评

暂无评论

A Reinforcement Learning Based Dynamic Multi-Objective Constrained Evolutionary Algorithm for Open-Pit Mine Truck Scheduling

A Reinforcement Learning Based Dynamic Multi-Objective Const...

引用

Chinese automation Congress (CAC)

作者： Junxiang Qiu Changhe Li Shengxiang Yang Engineering Research Center of Intelligent Technology for Geo- Exploration Ministry of Education School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China School of Computer Science and Informatics De Montfort University Leicester UK

Aiming at the truck scheduling problem in the open-pit mine scenario, a truck scheduling model based on real-time ore blending is established, and an adaptive evolution algorithm for truck scheduling based on DCNSGA-III is proposed. In the established scheduling model, the real-time grade variance of the crushing plant is minimized as one of the optimization objectives, and the Q-learning algorithm is introduced to adaptively select one of the most effective operators during the search process. Experiments show that the proposed method can effectively control the grade fluctuation of the ore flow and better scheduling schemes are obtained in comparison with algorithms equipped with the traditional search operator selection methods.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Multi-modal Panoramic Speaker Localization Method

A Multi-modal Panoramic Speaker Localization Method

引用

2021 China automation Congress, CAC 2021

作者： Long, Y.Z. Jian, Y.W. Liu, Z.T. School of Automation China University of Geosciences WuHan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems WuHan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

ISBN: (纸本)9781665426473

As a supporting technology in the field of human-computer interaction, speaker localization method has been a research hotspot in recent years. However, the existing single-mode speaker location methods cannot meet the requirements of stability and rapidity. for improve the accuracy and effective positioning range of speaker localization system, a multi-modal panoramic speaker localization method is proposed in this paper. Firstly, the coarse position of the speaker was preliminarily obtained by sound source localization. Then, according to the initial positioning of the speaker, whether the image used for face recognition need to be stitched is decided. What's more, the position of speaker is calculated by face detection and calibration. Finally, the results of voice and image localization are fused by coordinate transformation. The proposal is tested on self-built experimental system, and the experimental results prove the effectiveness of the proposed method. © 2021 IEEE

关键词： Face recognition

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：