检索结果-内蒙古大学图书馆

Synthesis of Zeolite from Waste Concrete Powder

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy 2022年第5期69卷 208-212页

作者： Harada, Satori Kanda, Yasuyuki Mechanical Systems Engineering Course Graduate School of University of the Ryukyus 1 Senbaru Nishihara-cho Nakagami-gun Okinawa903-0213 Japan Mechanical Engineering Program School of Engineering Faculty of Engineering University of the Ryukyus 1 Senbaru Nishihara-cho Nakagami-gun Okinawa903-0213 Japan

This study investigated the conditions for zeolite synthesis from waste concrete powder (WCP) using the hydrothermal synthesis method. The WCP was prepared by milling the waste concrete using pot mill equipment. The synthesis conditions, i.e., the heating time, heating temperature, and NaOH solution concentration were varied. Furthermore, hydrochloric acid-treated WCP (WCP-HCl), which is removed the calcium component, was prepared to examine the effectiveness of acid treatment in the zeolite synthesis. The zeolite synthesis was investigated using X ray diffraction (XRD) and scanning electron microscopy (SEM). Analcime-type zeolite was synthesized using WCP and WCP-HCl. The requirements of synthesis conditions for analcime were as follows: heating time above 12 h, heating temperature above 433 K, and NaOH solution concentration above 2 mol/ L. With a progressive increase in the concentration of the NaOH solution from 5 to 7 mol/L, analcime could be synthesized at NaOH concentrations below 4 mol/L, while cancrinite was synthesized at NaOH concentrations exceeding 5 mol/L. The peak intensity of analcime and cancrinite of WCP-HCl showed high value in comparison to the WCP. Thus, the effectiveness of the HCl treatment of WCP was confirmed from the XRD patterns. ©2022 Japan Society of Powder and Powder Metallurgy.

关键词： Hydrothermal synthesis

来源：评论

学校读者我要写书评

暂无评论

Effect of chemical composition and microstructure on the thermal conductivity of Mg-Al-Ca alloys

引用

Keikinzoku/Journal of Japan Institute of Light Metals 2024年第1期74卷 9-13页

作者： Kirimoto, Yuichi Kondo, Natsuki Ito, Mizuki Tsukeda, Tadayoshi Aida, Tetsuo Tabata, Hironobu Kurihara, Hideki Suzuki, Mayumi Department of Nano and Functional Material Science Graduate School of Science and Engineering for Education University of Toyama 3190 Gofuku Toyama-shi Toyama930-8555 Japan School of Sustainable Design Materials and Engineering University of Toyama Toyama-shi Toyama Japan Program of Materials Science and Engineering Studies in Science and Engineering Graduate School of Science and Engineering University of Toyama Toyama-shi Toyama Japan Faculty of Sustainable Design Academic Assembly University of Toyama Toyama-shi Toyama Japan CHUETSU METAL WORKS CO. LTD. Nakaniikawa-gun Toyama Japan Saitama Industrial Technology Center Kawaguchi-shi Saitama Japan Department of Mechanical Systems Engineering Faculty of Engineering Toyama Prefectural University Imizu-shi Toyama Japan

In recent years, the increasing demand for electric vehicles, digital devices such as PCs and smartphones, and renewable energy storage systems has created a need for higher-performance batteries. Accordingly, the thermal conductivity of the case that houses the battery is becoming increasingly important. In this study, compositions with high thermal conductivity and good castability were investigated, focusing on Mg-Al-Ca alloys, and the relationship between the two was examined through thermal conductivity measurements and microstructural observations. As a result, the Mg-6%Al-4%Ca alloy was optimal in terms of castability and thermal conductivity. It was confirmed that a lower Al solid solution capacity and a higher purity of the matrix phase are important to improve the thermal conductivity. It is also suggested that the second phase, platelet Al2Ca, is likely to be recognized and enriched in the matrix, contributing to the improvement of thermal conductivity. The amount of Ca solid solution in the matrix was suggested to be reduced by the enrichment of Al in the matrix. The Ca solid solution in the matrix was found to be less effective in reducing thermal conductivity than the Al solid solution. © 2024 The Japan Institute of Light Metals.

关键词： Magnesium alloys

来源：评论

学校读者我要写书评

暂无评论

Faster Algorithms for a Lexicographic Bi-Criteria Line Balancing Problem with Totally Ordered Precedence Constraints 13

Faster Algorithms for a Lexicographic Bi-Criteria Line Balan...

引用

Joint 13th International Conference on Soft Computing and Intelligent systems and 25th International Symposium on Advanced Intelligent systems, SCIS and ISIS 2024

作者： Imahori, Shinji Karuno, Yoshiyuki Ueda, Yuma Chuo University Faculty of Science and Engineering Tokyo Japan Kyoto Institute of Technology Faculty of Mechanical Engineering Kyoto Japan Graduate School of Science and Technology Kyoto Institute of Technology Mechanodesign Program Kyoto Japan

ISBN: (纸本)9798350373332

The line balancing has been an important production strategy which aims at redressing the balance of workloads on machines in an assembly type of production system. In this paper, a lexicographic bi-criteria optimization model of the line balancing is revisited for a mass-production of one homogeneous product. A sequence of machines and a totally ordered set of tasks are given. The machines are considered to be situated along with a production line, according to their sequence. Precedence relations between tasks are specified by the total order of tasks. The task set also consists of a given number of disjoint subsets, namely categories such that tasks in a category are considered to constitute a certain kind of family of technical skills. Each task has a positive processing time and a category index. A solution to the problem is expressed by an assignment of tasks to machines, and for the feasibility of a solution, the assignment must obey the totally ordered precedence constraint on tasks. The sum of processing times of tasks assigned to a machine in a feasible solution is the load of the machine, and the number of category indexes of tasks assigned to a machine is referred to as the degree of diverseness of the task subset. The primary objective of the problem is to minimize the maximum machine load, and the second objective is to minimize the maximum degree of diverseness of tasks assigned to a machine. The lexicographic bi-criteria line balancing problem with totally ordered precedence constraints has been known to admit a polynomial time exact algorithm, whose time complexity is linear in the number of machines and squared in the number of tasks. In this paper, a faster polynomial time exact algorithm is proposed, which improves the time complexity to be squared in the number of tasks. © 2024 IEEE.

关键词： Polynomial approximation

来源：评论

学校读者我要写书评

暂无评论

Heading Angle Estimation Using Intelligent Fusion for Autonomous Vehicles

Heading Angle Estimation Using Intelligent Fusion for Autono...

引用

2023 Advances in Science and engineering Technology International Conferences, ASET 2023

作者： Barakat, Ali A. Jardat, Mohammad A. Elsergany, Ahmed M. Sherif, Nidal A. American University of Sharjah Mechanical Engineering Department Sharjah United Arab Emirates American University of Sharjah Mechatronics Engineering Graduate Program Sharjah United Arab Emirates

ISBN: (纸本)9781665454742

Low-cost navigation systems for ground vehicles often rely on the fusion with Global Positioning System (GPS) for improved state estimation. In this study a low-cost gyroscope is fused with a GPS for improved vehicle heading angle estimation using several Artificial Intelligence (AI) based architectures that include Shallow Neural Networks (SNN), Multi-Layer Neural Networks (MLNN), and Adaptive Neuro- Fuzzy Inference systems (ANFIS). The primary goal behind using AI based sensor fusion is to obtain a highly accurate vehicle heading estimation suitable for autonomous navigation applications. When available, the GPS signal is used to correct the vehicle's heading angle. The neural networks and ANFIS methods both use the difference between the GPS signal and the heading angle from the integrated gyroscope as inputs. The performance achieved is shown and analyzed. According to the results obtained, the MLNN provides the most accurate heading estimates. © 2023 IEEE.

关键词： Global positioning system

来源：评论

学校读者我要写书评

暂无评论

Comprehensive technical analysis of post-combustion carbon capture and storage based on monoethanolamine absorption for petrochemical industry in Indonesia

引用

Clean Energy 2024年第6期8卷 16-36页

作者： Muh Asyrofi Rahma Muthia Mohammad Akita Indianto Energy Systems Engineering Graduate Program Department of Interdisciplinary EngineeringFaculty of EngineeringUniversitas IndonesiaKampus Baru UI DepokDepokWest Java 16424Indonesia Department of Chemical Engineering Faculty of EngineeringUniversitas IndonesiaKampus Baru UI DepokDepokWest Java 16424Indonesia Sustainable Energy Systems and Policy Research Cluster Universitas IndonesiaKampus Baru UI DepokDepokWest Java 16424Indonesia Tropical Renewable Energy Center Faculty of EngineeringUniversitas IndonesiaKampus Baru UI DepokDepokWest Java 16424Indonesia

The implementation of carbon capture and storage in the petrochemical industry is one of the means of *** research focuses on a comprehensive technical analysis of the deployment of post-combustion carbon capture and storage based on monoethanolamine absorption in the petrochemical *** olefin complex petrochemical industry in Tuban,Indonesia,is the basis for the analysis,which includes a steam cracker,polyethylene,polypropylene,and raw pyrolysis gasoline hydrotreating units,with capacities of 1000,940,600,and 570 kilotons/year,*** total energy consumption is about 16024.53 GJ/h,and the CO_(2) emissions are about 1.6 megatons/*** on these plant systems,comprehensive technical analyses of the implementation of carbon capture and storage in that industry were performed using Aspen HYSYS®simulation *** analysis was carried out to determine the total CO_(2) captured,energy intensity,monoethanolamine consumption,and net CO_(2) captured in various scenarios based on the number of absorber column stages,absorption pressure,and desorption *** CO_(2) storage site is about 100 km away and is transported by an onshore pipeline with a supercritical phase of CO_(2).The optimal net CO_(2) capture value is achieved by setting up a 50-stage absorber column with a pressure of 1 barg and a temperature of 110℃ at the top of the desorber column,resulting in a CO_(2) capture yield of 86.4%and an energy intensity of 12.6 GJ/ton CO_(2).Under these conditions,the net CO_(2) captured in the scenario based on gas power plants’electricity is 0.225 megatons/year,while in the scenario based on gas power plants incorporating 30%biomass electricity,it is 0.544 megatons/*** increased use of renewable energy in carbon capture and storage facilities,more net CO_(2) is *** study can be applied to various cases of post-combustion carbon capture and storage implementation in the industrial sector,especially in the

关键词： carbon capture and storage petrochemical olefin monoethanolamine absorption pipeline injection energy intensity net captured CO_(2)

来源：评论

学校读者我要写书评

暂无评论

Effect of Overload and Underload on Subsequent Deformation Behavior during Cyclic Deformation

引用

Zairyo/Journal of the Society of Materials Science, Japan 2022年第2期71卷 159-166页

作者： Kondou, Ryouji Yama, Katsunari Energy and Environmental Program School of Engineering Faculty of Engineering University of the Ryukyus Nishihara-cho Nakagami-gun Okinawa903-0213 Japan Department of Mechanical Systems Engineering Graduate School of Engineering and Science University of the Ryukyus Nishihara-cho Nakagami-gun Okinawa903-0213 Japan

A multi-scale analysis of elasto-plastic deformation and dislocation movement and accumulation of tricrystalline models during cyclic deformation was performed. The accumulation of dislocations in geometrically necessary dislocations (GNDs) and statistically stored dislocations (SSDs) was investigated in detail. Experimental observations have shown that fatigue life and fatigue crack propagation are also deteriorated when the material is subjected to overload or underload. However, in the microscopic and mesoscopic regions, where the effects of the crack tip shape change are not related to the size of the crack tip, a different phenomenon is essentially occurring. In this paper, the effects of overload and underload are investigated using a simple model without a crack. From the analysis results, it was found that the dislocation structure generated in the material subjected to overload or underload affects the subsequent deformation behavior. However, even though the absolute values are the same, the effects of overloading and underloading on the subsequent deformation are different, and underloading increases the non-uniformity of the subsequent deformation, which is on the dangerous side, while overloading decreases with increasing the number of repetitions. ©2022 The Society of Materials Science, Japan

关键词： Crack tips

来源：评论

学校读者我要写书评

暂无评论

Performance Analysis of Ducted-Fan Modules with Axial Impeller

Performance Analysis of Ducted-Fan Modules with Axial Impell...

引用

2024 International Conference on Precision engineering and mechanical Manufacturing, PEMM 2024

作者： Shiau, Yau-Ren Fang, Jiunn Huang, Yuan-Chi Department of Industrial Engineering and Systems Management Feng Chia University Taichung407 Taiwan Department of Aerospace and Systems Engineering Feng Chia University Taichung407 Taiwan Ph.D. Program of Mechanical and Aeronautical Engineering Feng Chia University Taichung407 Taiwan

ISBN: (纸本)9781510683129

Impellers are extensively employed across various industrial sectors and in different industrial systems, such as ducted-fan modules. The configuration of ducted-fan modules can be optimized to achieve high impeller performance, safe and stable operation, and high operational efficiency. This study designed two ducted-fan modules with axial impellers composed of airfoil cascades by using the Fan Calculator software program to analyze their performance and efficiency. The study discovered that the module efficiency varied with the internal impeller diameter, external impeller diameter, and rotational speed. An increase in the outlet angle of the blade tip caused increases in the power generated by, pressure change produced in, and flow rate of the modules, thereby enhancing fan efficiency and module performance. The study makes two contributions. First, it constructed two ducted-fan modules with axial impellers by using the duct to isolate the blades, thus increasing the safety and stability of the fan. Second, it explored the performance and efficiency of impellers with airfoil cascades to enhance fan efficiency and optimize the design of a ducted-fan module. © 2024 SPIE.

关键词： Ducted fan engines

来源：评论

学校读者我要写书评

暂无评论

Folding angle and wing flexibility influence the flight performance of origami winged fruits

引用

Nonlinear Dynamics 2024年第13期112卷 10995-11011页

作者： Cai, Jing-Fang Hsu, Ya-Chun Yen, Yu-Chen Lee, Yun-Chung Peyton, Bernie Huang, Mei-Jiau Yu, Hon-Tsen Juang, Jia-Yang Department of Mechanical Engineering National Taiwan University Taipei106319 Taiwan Department of Life Science National Taiwan University Taipei106319 Taiwan Berkeley CA United States Program in Nanoengineering and Nanoscience Graduate School of Advanced Technology National Taiwan University Taipei106319 Taiwan Degree Program of Genome and Systems Biology National Taiwan University Taipei106319 Taiwan

Winged fruits possess a unique flight mechanism relying on simple geometric structures rather than neuromuscular control. This study proposes an innovative approach using origami techniques to create three-winged model fruits, serving as a proxy for understanding the flight dynamics of natural winged fruits. Paper is employed to simulate inherent wing flexibility, with the option to add plastic frames for rigidity. We comprehensively investigate the free fall motion of both rigid and flexible winged fruits through experimental and numerical analyses. Velocity–time curves reveal a three-stage descent pattern—acceleration, deceleration, and steady states. The overshoot phenomenon is attributed to rapid lift increase due to leading-edge vortices attaching stably to the wings. This insight sheds light on aerodynamics governing fruit flight. Compared with rigid wings, flexible wings exhibit two key properties—slower descent and higher self-orienting capability—that facilitate a more stable and longer-distance dispersal of seeds under crosswind conditions. Our study demonstrates the potential benefits of flexible wings in natural seed distribution. This study advances our understanding of winged fruit flight dynamics, utilizing origami as a powerful tool for biomimetic investigations. The findings have broad implications, from improving aerodynamic designs to developing efficient micro air vehicles and electronic microfliers, and understanding seed dispersal evolution. Graphical abstract: (Figure presented.). © The Author(s), under exclusive licence to Springer Nature B.V. 2024.

关键词： Fruits

来源：评论

学校读者我要写书评

暂无评论

A Conjoint Analysis on the Preference of Pipe Welding Materials and Procedures

A Conjoint Analysis on the Preference of Pipe Welding Materi...

引用

2024 IEEE International Conference on industrial engineering and engineering Management, IEEM 2024

作者： Dela Cruz, Erick D. Prasetyo, Yogi Tri Ayuwati, Irene Dyah Cahigas, Maela Madel L. Nadlifatin, Reny School of Industrial Engineering and Engineering Management Mapúa University Manila Philippines School of Graduate Studies Mapúa University Manila Philippines International Bachelor Program in Engineering Yuan Ze University Taoyuan Taiwan Department of Industrial Engineering and Management Yuan Ze University Taoyuan Taiwan University of Surabaya Surabaya Indonesia Department of Information Systems Institut Teknologi Sepuluh Nopember Surabaya Indonesia

ISBN: (纸本)9798350386097

Welding is both as art and science and its common use is the jointing of points. Some of the welding procedures used for jointing metal pipes are Tungsten Inert Gas and Gas Metal Arc welding and in common practice plastic pipes are bonded with the use of butt-fusion welding procedure. Since 1970’s conjoint analysis was used as a way of finding out what the preference of consumers. The objective of this study is to determine the combination welding attributes that were most preferred using a conjoint analysis approach. With conjoint analysis, together with, the orthogonal design the preference for welding materials and procedures were analyzed. It showed that pipe material with 29.24% was the most preferred attribute and Nondestructive test as the least preferred with 2.66%. The result of this study may be utilized in future related reviews and could be applicable in other related mechanical systems requiring welding works. © 2024 IEEE.

关键词： Nondestructive examination

来源：评论

学校读者我要写书评

暂无评论

Numerical Investigation Effect of the addition of palm fronds on the burning of coal-fired boilers tangentially

Numerical Investigation Effect of the addition of palm frond...

引用

2023 International Conference on Advanced Mechatronics, Intelligent Manufacture and industrial Automation, ICAMIMIA 2023

作者： Ihsan, Sobar Prabowo Widodo, Wawan Aries Adi Saputra, I Nyoman Agus Institut Teknologi Sepuluh Nopember Graduate Program of Mechanical Engineering Department Surabaya Indonesia University of Islam Kalimantan Maab Indonesia Institut Teknologi Sepuluh Nopember Mechanical Engineering Department Surabaya Indonesia

ISBN: (纸本)9798350309225

Biomass co-firing is an appropriate and cheap solution for achieving renewable energy targets towards net zero emissions because it can reduce the potential environmental impacts associated with burning fossil fuels. CFD simulations were carried out by adding palm frond biomass with a ratio of 5% and 95% LRC coal, which was injected into the boiler combustion furnace. The boiler operational parameters used in this simulation are a coal flow rate of 151.75 tons/hour and an airflow rate of 1184.33 tons/hour on the research subject PLTU Pacitan with a capacity of 315 Mw. The results show that adding palm frond biomass to burning coal changes calorific value, affecting the combustion process's high temperature. However, it has a good impact from the operational side of burning coal particles. © 2023 IEEE.

关键词： Biomass

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：