检索结果-内蒙古大学图书馆

5th IFAC Symposium on Mechatronic Systems, MECHATRONICS 2010

作者： Beck, Mark Schwung, Andreas Muenchhof, Marco Isermann, Rolf TU Darmstadt Institute of Automatic Control Laboratory for Control Systems and Process Automation 64283 Darmstadt Germany TU Darmstadt Institute of Automatic Control Laboratory for Control Theory and Robotics 64283 Darmstadt Germany

ISBN: (纸本)9783902661760

In this paper fault detection, fault diagnosis and active fault tolerant control of an electro-hydraulic servo-axis with a duplex-valve-system are described. The fault detection is based on parity equations. The semi-physical models allow the detection of even small faults in the hydraulic system. The fault diagnosis used on the testbed is based on fuzzy-logic. In order to tolerate a failed hydraulic proportional valve, a duplex-valve-system built up with standard direct-driven proportional valves is applied. The fault management module allows the supervision of the hydraulic servo axis and decides on reconfiguration and fault accomodation of the control-loop. The Internal Model control (IMC)-tracking control structure used for reconfiguration allows bumpless transfer between controllers. Experimental results show the industrial applicability of the approach. © 2010 IFAC.

关键词： Fault detection

来源：评论

学校读者我要写书评

暂无评论

Fault-tolerant control of an electro-hydraulic servo axes with a duplex-valve-system

Fault-tolerant control of an electro-hydraulic servo axes wi...

引用

ISBN: (纸本)9783902661937

This paper presents fault detection, fault diagnosis, the fault-tolerant control of an electro-hydraulic servo axes with a duplex-valve-system. The fault detection is based on parity equations and is load independent. The semi-physical models allow the detection of even small faults in the hydraulic system. The fault diagnosis used at the testbed is based on fuzzy-logic. In order to tolerate a faulty hydraulic proportional valve, a duplex-valve-system built up with standard proportional valves is applied. The fault management module allows the supervision of the hydraulic servo axes and decides on the reconfiguration of the control-loop. An Internal Model control (IMC)-tracking control structure for bumpless transfer between controllers is presented. Experimental results show the industrial applicability of the approach. © 2011 IFAC.

关键词： Fault detection

来源：评论

学校读者我要写书评

暂无评论

Motion comparison method combining segmented multi-Joint line graphs with the SIFT matching technique

Motion comparison method combining segmented multi-Joint lin...

引用

4th International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2014

作者： Zeng, Ming Ren, Hong Lin Meng, Qing Hao Chen, Chang Wei Ma, Shu Gen Tianjin Key Laboratory of Process Measurement and Control Institute of Robotics and Autonomous Systems School of Electrical Engineering and Automation Tianjin University Tianjin 300072 China

ISBN: (纸本)9783038351924

In this paper, an effective motion comparison method based on segmented multi-joint line graphs combined with the SIFT feature matching method is proposed. Firstly, the multi-joint 3D motion data are captured using the Kinect. Secondly, 3D motion data are normalized and distortion data are removed. Therefore, a 2D line graph can be obtained. Next, SIFT features of the 2D motion line graph are extracted. Finally, the line graphs are divided into several regions and then the comparison results can be calculated based on SIFT matching ratios between the tutor's local line graph and the trainee's local line graph. The experimental results show that the proposed method not only can easily deal with the several challenge problems in motion analysis, e.g., the problem of different rhythm of motions, the problem of a large amount of data, but also can provide detailed error correction cues. © (2014) Trans Tech Publications, Switzerland.

关键词： Motion analysis

来源：评论

学校读者我要写书评

暂无评论

Recurrence characteristics analysis of near-Surface wind speed signal with different sampling frequencies

Recurrence characteristics analysis of near-Surface wind spe...

引用

4th International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2014

作者： Zeng, Ming Wu, Zhan Xie Meng, Qing Hao Li, Jing Hai Ma, Shu Gen Tianjin Key Laboratory of Process Measurement and Control Institute of Robotics and Autonomous Systems School of Electrical Engineering and Automation Tianjin University Tianjin 300072 China

ISBN: (纸本)9783038351924

The wind is the main factor to influence the propagation of gas in the atmosphere. Therefore, the wind signal obtained by anemometer will provide us valuable clues for searching gas leakage sources. In this paper, the Recurrence Plot (RP) and Recurrence Quantification Analysis (RQA) are applied to analyze the influence of recurrence characteristics of the wind speed time series under the condition of the same place, the same time period and with the sampling frequency of 1hz, 2hz, 4.2hz, 5hz, 8.3hz, 12.5hz and 16.7hz respectively. Research results show that when the sampling frequency is higher than 5hz, the trends of recurrence nature of different groups are basically unchanged. However, when the sampling frequency is set below 5hz, the original trend of recurrence nature is destroyed, because the recurrence characteristic curves obtained using different sampling frequencies appear cross or overlapping phenomena. The above results indicate that the anemometer will not be able to fully capture the detailed information in wind field when its sampling frequency is lower than 5hz. The recurrence characteristics analysis of the wind speed signals provides an important basis for the optimal selection of anemometer. © (2014) Trans Tech Publications, Switzerland.

关键词： Time series

来源：评论

学校读者我要写书评

暂无评论

Biomechanical analysis of typical upper limb movements based on Kinect-LifeMOD

Biomechanical analysis of typical upper limb movements based...

引用

4th International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2014

作者： Zeng, Ming Chen, Chang Wei Meng, Qing Hao Ren, Hong Lin Ma, Shu Gen Tianjin Key Laboratory of Process Measurement and Control Institute of Robotics and Autonomous Systems School of Electrical Engineering and Automation Tianjin University Tianjin 300072 China

ISBN: (纸本)9783038351924

In traditional biomechanical analysis of upper limb, the high-precision motion data and lifelike human models are needed. It is obvious that those processes are costly and time-consuming. In this paper, a novel and simple combination method based on Kinect-LifeMOD is proposed. Firstly, the Microsoft Kinect (a latest depth sensor) is used to build a cheap and precise motion capture platform. Real-time and reliable key-node rotation data of human skeletons can be acquired by this motion capture system. Next, rotation data is converted into position data as the input of the LifeMOD software which can establish mathematical model of upper limb and execute biomechanical analysis automatically. The experimental results show that the proposed method could achieve the satisfactory performance. © (2014) Trans Tech Publications, Switzerland.

关键词： Biomechanics

来源：评论

学校读者我要写书评

暂无评论

A control Theory Approach to Improve the Real-Time Capability of Multi-Threaded Microprocessors

A Control Theory Approach to Improve the Real-Time Capabilit...

引用

International Symposium on Object-Oriented Real-Time Distributed Computing

作者： Uwe Brinkschulte Mathias Pacher Institute for Process Control Automation and Robotics University of Karlsruhe Germany

ISBN: (纸本)9780769531328

Our aim is to investigate if it is possible to control the throughput (IPC rate) of a thread running on a simultaneous multi-threaded microprocessor by a closed feedback loop. We showed in previous experimental studies that the proposed approach works. In this paper we discuss the control theory approach from a theoretical point of view. We develop a mathematical model of a general purpose multi-threaded microprocessor enhanced with a closed feedback controller and use control theory methods to investigate properties like stability and settling time.

关键词： control theory Microprocessors Yarn Clocks Adaptive control Communication system control robotics and automation Throughput Mathematical model Delay

来源：评论

学校读者我要写书评

暂无评论

A tactile proximity sensor

A tactile proximity sensor

引用

IEEE SENSORS

作者： Dirk Goeger Matthias Blankertz Heinz Woern Institute of Process Control Automation and Robotics Karlsruhe Institute of Technology Karlsruhe Germany

This paper introduces a novel tactile sensor with the ability to detect objects in the sensor's near proximity. For both tasks, the same capacitive sensing principle is used. The tactile part of the sensor provides a tactile sensor array enabling the sensor to gather pressure profiles of the mechanical contact area. Several tactile sensors have been developed in the past. These sensors lack the capability of detecting objects in their near proximity before a mechanical contact occurs. Therefore, we developed a tactile proximity sensor, which is able to measure the current flowing out of or even into the sensor. Measuring these currents and the exciting voltage makes a calculation of the capacitance coupled to the sensor's surface and, using more sensors of this type, the change of capacitance between the sensors possible. The sensor's mechanical design, the analog/digital signal processing and the hardware efficient demodulator structure, implemented on a FPGA, will be discussed in detail.

关键词： Electrodes Tactile sensors Current measurement Capacitance Voltage measurement

来源：评论

学校读者我要写书评

暂无评论

Tactile proximity sensors for robotic applications

Tactile proximity sensors for robotic applications

引用

IEEE International Conference on Industrial Technology

作者： Dirk Goger Hosam Alagi Heinz Worn Institute for Process Control Automation and Robotics Karlsruhe Institute of Technology Karlsruhe Germany

ISBN: (纸本)9781467345675

In this paper tactile proximity sensors for close human-robot interactions based on a previously developed sensor are introduced. Using the same sensing technology, we developed large area tactile proximity sensors as a robot skin and small sensors which we have integrated in an anthropomorphic robot hand. Tactile sensing in the area of robotics for close human-interaction is still a challenging task. In the most cases tactile sensors need to be supported by other sensor modalities to perceive the robots environment before contacts occur. To overcome this issue we developed tactile proximity sensors for robot surfaces and for robot grippers. Both sensors, their behaviour and a model of the tactile sensor will be discussed in this paper.

关键词： Proximity sensors Touch tactile sensors robotic gripper Sensors Robot robotics

来源：评论

学校读者我要写书评

暂无评论

Thermometry of photosensitive and optically induced electrokinetics chips

引用

Microsystems & Nanoengineering 2018年第1期4卷 190-198页

作者： Feifei Wang Lianqing Liu Gongxin Li Pan Li Yangdong Wen Guanglie Zhang Yuechao Wang Gwo-Bin Lee Wen Jung Li State Key Laboratory of Robotics Shenyang Institute of AutomationChinese Academy of Sciences110016 ShenyangChina University of Chinese Academy of Sciences 100049 BeijingChina Shenzhen Academy of Robotics 518057 ShenzhenChina Key Laboratory of Advanced Process Control for Light Industry of the Ministry of Education Institute of AutomationJiangnan University214122 WuxiChina Department of Power Mechanical Engineering National Tsing Hua University30013 HsinchuTaiwan Department of Mechanical and Biomedical Engineering City University of Hong KongKowloon TongHong KongChina

Optically induced electrokinetics(OEK)-based technologies,which integrate the high-resolution dynamic addressability of optical tweezers and the high-throughput capability of electrokinetic forces,have been widely used to manipulate,assemble,and separate biological and non-biological entities in parallel on scales ranging from micrometers to ***,simultaneously introducing optical and electrical energy into an OEK chip may induce a problematic temperature increase,which poses the potential risk of exceeding physiological conditions and thus inducing variations in cell behavior or activity or even irreversible cell damage during ***,we systematically measure the temperature distribution and changes in an OEK chip arising from the projected images and applied alternating current(AC)voltage using an infrared *** have found that the average temperature of a projected area is influenced by the light color,total illumination area,ratio of lighted regions to the total controlled areas,and amplitude of the AC *** an example,optically induced thermocapillary flow is triggered by the light image-induced temperature gradient on a photosensitive substrate to realize fluidic hydrogel *** studies show that the projected light pattern needs to be properly designed to satisfy specific application requirements,especially for applications related to cell manipulation and assembly.

关键词： exceeding illumination manipulation

来源：评论

学校读者我要写书评

暂无评论

Fault-tolerant control of an electro-hydraulic servo axes with a duplex-valve-system *

引用

IFAC Proceedings Volumes 2011年第1期44卷 9425-9433页

作者： Beck Mark Schwung Andreas Muenchhof Marco Isermann Rolf TU Darmstadt Institute of Automatic Control Laboratory for Control Systems and Process automation 64283 Darmstadt Germany TU Darmstadt Institute of Automatic Control Laboratory for Control Theory and Robotics 64283 Darmstadt Germany

Abstract This paper presents fault detection, fault diagnosis, the fault-tolerant control of an electro-hydraulic servo axes with a duplex-valve-system. The fault detection is based on parity equations and is load independent. The semi-physical models allow the detection of even small faults in the hydraulic system. The fault diagnosis used at the testbed is based on fuzzy-logic. In order to tolerate a faulty hydraulic proportional valve, a duplex-valve-system built up with standard proportional valves is applied. The fault management module allows the supervision of the hydraulic servo axes and decides on the reconfiguration of the control-loop. An Internal Model control (IMC)-tracking control structure for bumpless transfer between controllers is presented. Experimental results show the industrial applicability of the approach.

关键词： Fault Detection Fault Diagnosis Fault Tolerance Electro-hydraulic Servo Axes Duplex-valve-system Active Fault-Tolerant control Reconfiguration Bumpless-Transfer

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：