检索结果-内蒙古大学图书馆

JOURNAL OF INTELLIGENT & ROBOTIC systems 1997年第4期19卷 375-391页

作者： Rembold, U Fatikow, S Institute for Real-Time Computer Systems and Robotics University of Karlsruhe Kaiserstr. 1 (Geb. 40.28) 76128 Karlsruhe Germany

Robots have been a subject of research for almost half a century. In order to make robots more versatile they must be able to operate in a semi-structured work place where unforeseen events occur and where sensor data are incomplete. An entire research community has been working on this problem and many unique autonomous and so-called intelligent robots have been conceived and built. Most of these efforts are concerned with robots that operate in the macroworld where they take on chores that could also be handled by humans. However, there is the macroworld in which manipulation and handling tasks are very difficult and for which a human has no tools and where the work area is so small that fine manual manipulation is almost impossible. This paper is concerned with autonomous robots that can operate in a microworld, where microassembly operations, microsurgery or integrated circuit testing and repair is done. For independent operations, these robots need special sensors and an efficient computer architecture that hosts the planner and executor. There are also special drive systems and effecters necessary for micromotions and micromanipulations, respectively. An attempt is made to describe these components and the problems encountered in configuring them to a microrobot. As an example of advanced microrobots, the design and functions of several autonomous microrobots of the University of Karlsruhe are shown;they employ different locomotion and subject handling principles. The paper also includes a discussion of the typical operating problems caused by the microworld and of future research that has to be done to conceive and build efficient microrobots.

关键词： autonomous microrobots microassembly station micromanipulator piezoelectric actuators robot control

来源：评论

学校读者我要写书评

暂无评论

Learning and communication in multi-agent systems

Learning and communication in multi-agent systems

引用

12th European Conference on Artificial Intelligence, ECAI 1996, 2nd International Conference on Multiagent systems, ICMAS 1996, Workshop on Learning in Distributed Artificial Intelligence systems, LDAIS 1996 and Workshop on Learning, Interaction, and Organization in Multiagent Environments, LIOME 1996

作者： Friedrich, Holger Kaiser, Michael Rogalla, Oliver Dillmann, Rüdigex University of Karlsruhe Institute for Real-Time Computer Systems and Robotics KarlsruheD-76128 Germany

ISBN: (纸本)3540629343

This paper discusses the significance of communication between individual agents that are embedded into learning Multi-Agent systems. For several learning tasks occurring within a Multi-Agent System, communication activities are investigated and the need for a mutual understanding of agents participating in the learning process is made explicit. Thus, the need for a common ontology to exchange learning-related information is shown. Building this ontogy is an additional learning task that is not only extremely important, but also extremely difficult. We propose a solution that is motiwtted by the human ability to understand each other even in the absence of a common language by using alternative commuification channels, such as gestures. We show some results for the task of cooperative material handling by several manipulators. © 1997, Springer Verlag.

关键词： Multi agent systems

来源：评论

学校读者我要写书评

暂无评论

Virtual cutting in medical data

Virtual cutting in medical data

引用

作者： Mazura, A. Seifert, S. Institute for Real-time Computer Systems and Robotics University of Karlsruhe Department for Computer Science 76128 Karlsruhe Germany

In this paper we present a method for virtual 3D cutting operations in 3D tomographic data. When cutting interactively the user specifies a serie of 3D cutting points and correponding cut depths on the surface of the object. Each pair of succeeding cutting points then defines a freeform shape of the incision. A 3D meshing algorithm constructs a Finite Element mesh formed by tetrahedrons, representing the surgical intervention. © 1997 The authors.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Simulation of jaw-movements for the musculoskeletal diagnoses

Simulation of jaw-movements for the musculoskeletal diagnose...

引用

作者： Weingärtner, T. Dillmann, R. Institute for Real-Time Computer Systems and Robotics University of Karlsruhe Department for Computer Science 76128 Karlsruhe Germany

Simulations of static and dynamic aspects of the functionality of the human body are getting more important as the complexity of operations increases. The preoperative planning of maxillofacial operations like the repositioning of the jaw is an example for such operation. Here, but also in other medical fields, simulation can help to estimate the results of a procedure or can facilitate the diagnosis through a better view of the anatomy and pathology of the patient. A virtual view on the pathology and the possibility of simulating the postoperative results simplifies and improves the preoperative planning. The goal of our research is the development of a graphical simulation of the human mastication system to give the surgeon an impression on the inner anatomy of his patient. This simulation allows him to predict the aesthetic and functional outcome of his operation. The main focus of this paper is the introduction of a kinematic model of the temporomandibular joint. This kinematic model describes the geometrical and analytical movement of the jaw by specially defined axes. It is the basis for an animated simulation of the mandible movement. Through integration of the muscles and muscle forces, we come to a realistic dynamic simulation of the whole mastication system. © 1997 The authors.

关键词： Pathology

来源：评论

学校读者我要写书评

暂无评论

THE PROGRAMMING OF A TELEMANIPULATOR WITH THE FORCE-CUBE

THE PROGRAMMING OF A TELEMANIPULATOR WITH THE FORCE-CUBE

引用

ASME 1997 International Mechanical Engineering Congress and Exposition, IMECE 1997 - Dynamic systems and Control

作者： Schaude, Horst F. Dillmann, Rudiger University of Karlsruhe Institute for Real-Time Computer Systems and Robotics KaiserstraBe 12 Karlsruhe76128 Germany

ISBN: (纸本)9780791818244

While programming a telemanipulator the operator often uses special input devices to generate trajectories, which are to difficult for automatic planers. Though the trajectories are evaluated by a simulation and shown on a graphical animation, it is much faster to give the operator direct haptic feedback if a collision will occur while executing the trajectory. To combine the haptic feedback with an intuitive input device, we have developed the ForceCube. The input parameters are separated in three translational and three rotational values. They are matched on three orthogonal sides of a cube in such way, that their axes correspond to their counterparts in the real word. Each of the axes can be blocked in one direction. With this feature it is possible to move the manipulator with contact in one direction and without any constraints in the other directions. The ForceCube is integrated in the teleoperation system TelOS developed at the institute for real-time Computing and robotics. © 1997 American Society of Mechanical Engineers (ASME). All rights reserved.

关键词： Trajectories

来源：评论

学校读者我要写书评

暂无评论

Sensor system and powerful computer system for controlling a microrobot-based micromanipulation station

引用

JOURNAL OF MICROMECHANICS AND MICROENGINEERING 1997年第3期7卷 256-258页

作者： Fischer, T Santa, K Fatikow, S University of Karlsruhe Department of Computer Science Institute for Real-Time Computer Systems and Robotics Kaiserstr.12/Geb. 40.28 D-76128 Karlsruhe Germany Presented on 22 October 1996 accepted for publication 8 April 1997

Mobile microrobots, which are capable of performing microscopic motions, have become a subject of great interest all over the world, They have the potential to be used for a variety of applications: in industry for assembly of microsystems or for the testing of silicon chips;in medicine for handling biological cells, etc. A new model of an automated micromanipulation station, which includes piezoelectric microrobots is now being built by an interdisciplinary research group at the University of Karlsruhe, Germany, This paper describes a sensor system and a powerful tailorable computer for controlling the micromanipulation station.

关键词： Manipulators

来源：评论

学校读者我要写书评

暂无评论

A Comprehensive Approach for Planning and Control in Manufacturing systems

引用

IFAC Proceedings Volumes 1997年第1期30卷 81-86页

作者： B. Janusz W. Reithofer G. Grütter University of Karlsruhe Institute for Real-Time Systems and Robotics (IPR) Kaiserstr. 12 D-76128 Karlsruhe Germany

This paper describes results of the ESPRIT project HIMAC (Hierarchical Management and Control in Manufacturing systems). Within this project, several algorithms were developed and implemented: The planning algorithm concerns the minimization of the number of tools in a manufacturing system. The second algorithm is used for the definition of part families and resource groups. Regarding scheduling, an existing algorithm has been adapted and further improved to be applicable to the HIMAC specific representation. The implementation of the algorithms is based on the HIMAC theory, hence they use a common representation of a manufacturing system.

关键词： Algebraic approach hierarchies modelling optimization cheduling algorithms

来源：评论

学校读者我要写书评

暂无评论

A Process Oriented Method for the Reuse of CIM Models

引用

IFAC Proceedings Volumes 1997年第1期30卷 219-224页

作者： B. Janusz University of Karlsruhe Institute for Real-Time Systems and Robotics (IPR) Kaiserstr. 12 D-76128 Karlsruhe Germany

Enterprise models are used to support the solution of several organizational tasks. Although most of the existing modelling concepts were developed under the consideration of the aspect of process orientation, no methods exist which would prevent the user from creating a function oriented model. Beside this, once created models often cannot be reused for new tasks because the view on the enterprise described in the existing model does not correspond to the actual requirements. In the first part of this paper, a new approach is described, which helps to overcome these problems. In the second part, an optimization approach for the modelled process is proposed.

关键词： Enterprise modelling optimization

来源：评论

学校读者我要写书评

暂无评论

The Role of Models in Future Enterprises

引用

IFAC Proceedings Volumes 1997年第1期30卷 15-25页

作者： U. Rembold W. Reithofer B. Janusz University of Karisruhe Institute for Real-Time Systems and Robotics (IPR) Kaiserstr. 12 D-76128 Karlsruhe Germany

This paper describes the general problem of manufacturing, discusses the impact and consequences of the growing internationalisation of markets and gives an overview of the trends in key technologies of manufacturing systems. Furthermore, the need for models to support the design and reorganisation of CIM systems and Virtual Factories is discussed. Finally, particular approaches to solve such problems are introduced.

关键词： Enterprise Modelling CIMOSA Virtual Factory

来源：评论

学校读者我要写书评

暂无评论

3D-icon based user interaction for robot programming by demonstration

3D-icon based user interaction for robot programming by demo...

引用

IEEE International Symposium on Computational Intelligence in robotics and Automation (CIRA)

作者： H. Friedrich H. Hofmann R. Dillmann Inst. for Real-Time Comput. Syst. & Robotics Karlsruhe Univ. Germany Institute for Real-Time Computer Systems & Robotics IPR University of Karlsruhe Karlsruhe Germany

Within the last years the programming by demonstration (PbD) programming methodology gained more and more attention in robotics. However, a high quality way of human-robot interaction is crucial for a successful application of the PbD methodology in robotics. Hypotheses derived from the programming system, and control knowledge included in a generated robot program has to be checked back with and to be verified by the user in order to avoid potentially harmful errors that lead to faulty code. This paper describes a method for user-robot interaction that is based on 3D-icons and supports and facilitates the programming process in a robot programming by demonstration system significantly.

关键词： Robot programming Service robots Robot sensing systems Control systems Sensor systems Humans Robustness real time systems Intellectual property Electronic mail

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：