检索结果-内蒙古大学图书馆

Asian control Conference

作者： Shipeng Chen Wangnian Li Chengda Lu Yang Zhou Weihua Cao Min Wu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China CCTEG Xi'an Research Institute (Group) Co. Ltd. Xi'an China

ISBN: (数字)9789887581598

ISBN: (纸本)9798331540845

In deep geological drilling, encountering various formations is inevitable. Formation changes can lead to fluc-tuations in the weight on bit due to the bit-rock interaction. This paper proposes a disturbance observer-based weight on bit control system to mitigate the adverse effects of formation changes on system performance. First, an axis-torsion coupled dynamic model is established, and the relationship between the two dimensions is analyzed. The validity of the model is confirmed through comparison with field data collected from a geothermal well drilling operation. Then, a disturbance observer is designed to estimate and compensate for the disturbance at the control input, thereby reducing weight on bit fluctuations caused by formation variations. Simulation results considering formation variation during drilling verify the effectiveness of the proposed method.

关键词： Drilling Simulation System performance Geology Process control control systems Disturbance observers

来源：评论

学校读者我要写书评

暂无评论

Formulation of Optimization Problems with Radiation Field Phases as Design Variables for Pattern Synthesis of Linear Antenna Arrays

引用

China Communications 2022年第12期19卷 86-100页

作者： Fei Zhao Jun He Sanyou Zeng Changhe Li Qinghui Xu Zhigao Zeng School of Mechanical Engineering and Electronic Information China University of GeosciencesWuhan 430074China Science and Technology on Blind Signal Processing Laboratory Southwest Electronics and Telecommunication Technology Research InstituteChengdu 610041China School of Automation China University of GeosciencesWuhan 430074China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan 430074China College of Computer Hunan University of TechnologyZhuzhou CityHunan Province412007China

Pattern synthesise of antenna arrays is usually complicated optimization problems,while evolutionary algorithms(EAs)are promising in solving these *** paper does not propose a new EA,but does construct a new form of optimization *** new optimization formulation has two differences from the common *** is the objective function is the field error between the desired and the designed,not the usual amplitude error between the desired and the *** difference is beneficial to decrease complexity in some *** second difference is that the design variables are changed as phases of desired radiation field within shaped-region,instead of excitation *** difference leads to the reduction of the number of design variables.A series of synthesis experiments including equally and unequally spaced linear arrays with different pattern shape requirements are applied,and the effectiveness and advantages of the proposed new optimization problems are *** results show that the proposing a new optimization formulation with less complexity is as significant as proposing a new algorithm.

关键词： pattern synthesis evolutionary algorithms linear antenna arrays

来源：评论

学校读者我要写书评

暂无评论

Finite-Time Synchronization of Flux-controlled Complex-Valued Memristive Neural Networks

Finite-Time Synchronization of Flux-Controlled Complex-Value...

引用

Neuromorphic Computing (ICNC), International Conference on

作者： Yonghuan Wang Leimin Wang Genping Wu School of Automation China University of Geosciences Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Wuhan Second Ship Design and Research Institute Wuhan China

In this paper, by using the flux-controlled memristor model, the finite-time synchronization problem of delayed complex-valued memristive neural networks (MCNNs) is studied. Firstly, according to the proposed memristor model, we model the MCNNs as continuous systems on voltage-flux-time $(\wp, \varpi, t)$ domain. Then, we design a class of approaches to realize state synchronization between the drive and response systems, and the corresponding synchronization conditions are achieved. Finally, the effectiveness of results is illustrated with the simulations.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Swing-Up and Stable control Strategy for Pendubot Based on Nonlinear Model Predictive Method

A Swing-Up and Stable Control Strategy for Pendubot Based on...

引用

2023 China automation Congress, CAC 2023

作者： Wang, Lejun Liu, Yiqin Zhang, Ruihuan Huang, Zixin Cai, Zhen School of Automation School of Industrial Internet Chongqing University of Posts and Telecommunications Chongqing400065 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China Hubei Key Laboratory of Digital Textile Equipment Wuhan Textile University Wuhan430200 China School of Electrical and Information Engineering Wuhan Institute of Technology Wuhan430205 China School of Information Engineering Wuhan City Polytechnic Wuhan430064 China

ISBN: (纸本)9798350303759

The control objective of Pendubot is to stabilise the system in a vertically upward position by swinging up from a vertically downward position. Facing various physical constraints in practical applications, this paper proposes a swing-up stabil-isation control strategy based on a nonlinear model prediction method to accomplish the above control objective. On the basis of the system dynamics model, the forward Euler method is used to construct a nonlinear prediction model of the system. According to the control objectives and physical constraints of the system, the performance index function is designed, and then the control inputs of each sampling cycle are obtained through rolling optimisation and feedback correction, so that the system state gradually converges to the target trajectory, thus achieving the motion control objective. Based on the simulation results, it can be seen that the strategy proposed in this paper is efficient and robust under external disturbances. © 2023 IEEE.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Current-Induced Magnetic Switching in an L1_(0) FePt Single Layer with Large Perpendicular Anisotropy Through Spin–Orbit Torque

引用

Engineering 2022年第5期8卷 55-61页

作者： Kaifeng Dong Chao Sun Laizhe Zhu Yiyi Jiao Ying Tao Xin Hu Ruofan Li Shuai Zhang Zhe Guo Shijiang Luo Xiaofei Yang Shaoping Li Long You School of Automation China University of GeosciencesWuhan 430074China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems China University of GeosciencesWuhan 430074China School of Optical and Electronic Information Huazhong University of Science and TechnologyWuhan 430074China China Resources Microelectronics Limited Shanghai 200072China Shenzhen Huazhong University of Science and Technology Research Institute Shenzhen 518000China Wuhan National High Magnetic Field Center Huazhong University of Science and TechnologyWuhan 430074China

In this study,current-induced partial magnetization-based switching was realized through the spin–orbit torque(SOT)in single-layer L1_(0) FePt with a perpendicular anisotropy(K_(u⊥))of 1.19×10^(7) erg·cm^(-3)(1 erg·cm^(-3)=0.1 J·m^(-3)),and its corresponding SOT efficiency(βDL)was 8×10^(-6) Oe·(A·cm^(-2))^(-1)(1 Oe=79.57747 A·m^(-1)),which is several times higher than that of the traditional Ta/CoFeB/MgO structure reported in past *** SOT in the FePt films originated from the structural inversion asymmetry in the FePt films since the dislocations and defects were inhomogeneously distributed within the ***,the FePt grown on MgO with a granular structure had a larger effective SOT field and effi-ciency than that grown on SrTiO_(3)(STO)with a continuous *** SOT efficiency was found to be considerably dependent on not only the sputtering temperature-induced chemical ordering but also the lattice mismatch-induced evolution of the *** findings can provide a useful means of efficiently electrically controlling a magnetic bit that is highly thermally stable via SOT.

关键词： L1_(0)FePt SOT Inversion asymmetry Magnetic switching Perpendicular anisotropy

来源：评论

学校读者我要写书评

暂无评论

Fixed-Time Sliding Mode Tracking control for Two-Dimensional Directional Drilling System

Fixed-Time Sliding Mode Tracking Control for Two-Dimensional...

引用

Asian control Conference

作者： Jinyu Li Hongchao Wei Chengda Lu Wangnian Li Quanxin Li Min Wu School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Xi'an Research Institute Co. Ltd. China Coal Technology and Engineering Group Xi'an China

ISBN: (数字)9789887581598

ISBN: (纸本)9798331540845

In this paper, the effect of the initial state of the drilling system on trajectory tracking is taken into account in the directional drilling trajectory tracking control. Firstly, the trajectory model describing the two-dimensional drilling trajectory of the rotary steering system (RSS) is introduced. To improve the accuracy of trajectory tracking control and reduce the trajectory deviation, a fixed-time sliding mode control (FTSMC) method is introduced. Then, the stability of the closed-loop system is analyzed, and the range of controller parameters satisfying the stability condition is obtained. Finally, the effectiveness of the designed control strategy is verified by simulation experiments.

关键词： Drilling Upper bound Trajectory tracking Steering systems Stability analysis Trajectory Closed loop systems

来源：评论

学校读者我要写书评

暂无评论

An Auto-tuning method for aeration control in activated sludge wastewater treatment processes

An Auto-tuning method for aeration control in activated slud...

引用

2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering, ICECCME 2022

作者： Nascu, Ioana Du, Wenli Nascu, Ioan Technical University of Cluj Napoca Automation Department Cluj-Napoca Romania Key Laboratory of Advanced Control and Optimization for Chemical Processes East China University of Science and Technology Shanghai China Ministry of Education East China University of Science and Technology Key Laboratory of Advanced Control and Optimization for Chemical Processes Shanghai China Shanghai Institute of Intelligent Science and Technology Tongji University Shanghai China

ISBN: (数字)9781665470957

ISBN: (纸本)9781665470957

In this paper, a relay-feedback PID auto-tuning method and applications related to conventional Wastewater Treatment Plants are presented. The developed method has two steps: identification of the process model parameters and PID controller tuning. First, to identify two points on the process Nyquist curve, a relay-feedback based experiment is proposed. A linear model of second order is obtained and this model is further used for the tuning of the PID controller. The performances of the control algorithms are illustrated by simulation results. Both the reference tracking and the disturbance rejection capability have been tested and analyzed. The impact of changing a design parameter in the closed loop system behavior has also been explored. © 2022 IEEE.

关键词： Wastewater treatment

来源：评论

学校读者我要写书评

暂无评论

Evaluation of Landslide Susceptibility Using Machine Learning Based on Information Value Sampling Method

Evaluation of Landslide Susceptibility Using Machine Learnin...

引用

Chinese automation Congress (CAC)

作者： Lang Liu Xin Chen Lingran Zhao Weihua Cao School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Ministry of Education Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan China Exploration Institute of Geological Engineering of Xiangyang Xiangyang China

In landslide susceptibility prediction using machine learning (ML) models, the selection of appropriate negative samples significantly impacts the accuracy of the predictions. Many existing studies tend to randomly choose negative samples from the entire research area or specific attribute areas such as low slopes, leading to inaccuracies and biases that decrease the reliability of susceptibility mapping. To address this issue, this paper proposes an ML model based on the coupled information value (IV) method for susceptibility modeling. In this approach, the attribute values of environmental factors are transformed into information values, representing their contribution to landslides, using the information quantity method. Very low and low prone areas are then identified based on these information values, and random points are selected from these areas as negative samples for training and verifying subsequent machine learning models, which include the Random Forest (RF) model and Support Vector Machine (SVM) *** study focuses on the Three Gorges reservoir area in the Zigui-Badong area as an example. The comparative analysis of models trained using traditional sampling methods reveals that the RF model and SVM model, which were sampled using the information value method, achieve accuracies of 95.33% and 91.13%, respectively. In contrast, models trained using traditional sampling methods achieve accuracies of 90.43% and 88.69%, respectively.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Optimization of Robot End-Effector Load Gravity Compensation for Unmanned Live Work in Electric Power Distribution Networks Based on Improved PSO Algorithm

Optimization of Robot End-Effector Load Gravity Compensation...

引用

2023 China automation Congress, CAC 2023

作者： Chen, Jinge Chen, Xin Hu, Chenyu Huang, Guangxian Sun, Shu Jian, Xu School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Ministry of Education Engineering-Research Center of Intelligent Technology for Geo-Exploration Wuhan430074 China State Grid Hubei Electric Power Co. Ltd. Xianning Power Supply Company Distribution Department Xianning437000 China State Grid Hubei Electric Power Co. Ltd. Electric Power Science Research Institute Equipment Technology Center Wuhan430077 China

ISBN: (纸本)9798350303759

In the field of electric power distribution network operation, most tasks involve contact operations. A key technology to enable the flexible operation of robots in live distribution network tasks is the installation of six-dimensional force sensors on the robot's end flange. These sensors allow the robot to perceive external environmental contact forces. However, the presence of the end load interferes with the accurate perception of external forces. Aiming at the gravity compensation of robot end load, an optimization algorithm of gravity compensation based on particle swarm optimization is proposed. In this method, the optimal solution model is established with the objective of minimum sum of squared errors, and the particle swarm optimization algorithm is used to estimate the mounting declination angle of the force sensor and improve the precision of gravity compensation. The experiments show that the proposed method can effectively reduce the maximum gravity compensation error and the average gravity compensation error in each direction after optimization, in which the maximum gravity compensation error of the resultant force is reduced by 9.11% and the average gravity compensation error of the resultant force is reduced by 12.34%. © 2023 IEEE.

关键词： Error compensation

来源：评论

学校读者我要写书评

暂无评论

Anomaly Detection Based on Principle of Justifiable Granularity and Probability Density Estimation

Anomaly Detection Based on Principle of Justifiable Granular...

引用

2023 China automation Congress, CAC 2023

作者： Du, Sheng Ma, Xian Li, Xiang Wu, Min Cao, Weihua Pedrycz, Witold School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China University of Alberta Department of Electrical and Computer Engineering EdmontonABT6G 2R3 Canada Systems Research Institute Polish Academy of Sciences Warsaw00-901 Poland Istinye University Faculty of Engineering and Natural Sciences Department of Computer Engineering Istanbul Sariyer Turkey

ISBN: (纸本)9798350303759

Anomaly detection is essential to ensure the safety of industrial processes. This paper presents an anomaly detection approach based on the probability density estimation and principle of justifiable granularity. First, time series data are transformed into a two-dimensional information granule by the principle of justifiable granularity. Then, the test statistic is constructed, and the probability density and cumulative distribution functions of the test statistic are calculated. Next, the confidence level determines the test threshold. Finally, the time series data of a key parameter in the sintering process is used as a case study. The experimental result demonstrates that the proposed approach can detect abnormal time series data effectively, providing an accurate and effective solution for detecting time series anomalies in industrial processes. © 2023 IEEE.

关键词： Time series

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：