检索结果-内蒙古大学图书馆

Collaborative Factory Planning in Virtual Reality

Procedia CIRP 2012年 3卷 317-322页

作者： N. Menck X. Yang C. Weidig P. Winkes C. Lauer H. Hagen B. Hamann J.C. Aurich Institute for Manufacturing Technology and Production Systems (FBK) 67653 Kaiserslautern Germany Computer Graphics and HCI Group 67653 Kaiserslautern Germany Institute for Data Analysis and Visualization (IDAV) Davis 95616-8562 USA

The competitive development and optimization of manufacturing systems challenge the collaboration and innovation of enterprises. Different information, thinking, and points of view have to be exchanged across engineering, decision-making, and executive levels safely and effectively. The Virtual Reality (VR) technologies provide the users advanced Human-computer-Interfaces for designing, analyzing, and optimizing complex manufacturing systems. The objective of this paper is to describe a VR-based approach that allows the simultaneous visualization, investigation, and analysis for factory planning. This gives global entities a competitive advantage when conducting business.

关键词： Distance Collaboration Factory Planning Virtual Reality

来源：评论

学校读者我要写书评

暂无评论

SQUEEZE: fast and progressive decompression of triangle meshes

SQUEEZE: fast and progressive decompression of triangle mesh...

引用

computer graphics International

作者： R. Pajarola J. Rossignac Information & Computer Science University of California Irvine USA Graphics Visualization & Usability Center College of Computing Georgia Institute of Technology USA

An ideal triangle mesh compression technology would simultaneously support the following objectives: (1) progressive refinements of the received mesh during decompression, (2) nearly optimal compression ratios for both geometry and connectivity, and (3) in-line, real-time decompression algorithms for hardware or software implementations. Because these three objectives impose contradictory constraints, previously reported efforts have focused primarily on one (sometimes two) of these objectives. The SQUEEZE technique introduced in this paper addresses all three constraints simultaneously, and attempts to provide the best possible compromise. For a mesh of T triangles, SQUEEZE compresses the connectivity to 3.7T bits, which is competitive with the best progressive compression techniques reported so far. The geometric prediction error encoding technique introduced in this paper leads to a geometry compression that is improved by 20% over that of previous schemes. Our initial implementation on a 300-MHz CPU achieved a decompression rate of up to 46,000 triangles per second. SQUEEZE downloads a model through a number of successive refinement stages, providing the benefit of progressivity.

关键词： Hardware Encoding Bandwidth Geometry Image coding Shape Solid modeling computer science computer graphics visualization

来源：评论

学校读者我要写书评

暂无评论

Illustrative visualization

Illustrative visualization

引用

VIS 05: IEEE visualization 2005, Proceedings

作者： Viola, Ivan Gröller, Meister E. Hadwiger, Markus Bühler, Katja Preim, Bernhard Sousa, Mario Costa Ebert, David S. Stredney, Don Kanitsar, Armin Bruckner, Stefan Grimm, Sören Svakhine, Nikolai A. Jang, Yun Gaithert, Kelly Tietjen, Christian Krüger, Arno Peitgen, Heinz-Otto Isenberg, Tobias Hintze, Jana Hertel, Ilka Strauß, Gero Institute of Computer Graphics and Algorithms Vienna University of Technology Austria VRVis Research Center Vienna Austria Department of Simulation and Graphics University of Magdeburg Germany Department of Computer Science University of Calgary Canada School of Electrical and Computer Engineering Purdue University United States Ohio Supercomputer Center United States Institute of Computer Graphics and Algorithms Vienna University of Technology Austria VRVis Research Center Vienna Austria Electrical and Computer Engineering Purdue University United States IEEE Austria Department of Computer Science University of Calgary Canada Department of Computer Science Computer Graphics Research Lab. University of Calgary Canada Purdue University United States Ohio Supercomputer Center United States University of Texas Austin United States Interface Laboratory United States Biomedical Applications United States Department of Simulation and Graphics Otto-von-Guericke-University of Magdeburg Germany Otto-von-Guericke-University of Magdeburg FIN/ISG Germany Institute for Simulation and Graphics Department for Computer Science Otto-von-Guericke-University of Magdeburg Universitaetsplatz 2 39106 Magdeburg Germany Center for Medical Diagnosic Systems and Visualization Universitaetsallee 29 28359 Bremen Germany Department of Simulation and Graphics Otto-von-Guericke University of Magdeburg Germany ENT Department University Hospital of Leipzig Germany

ISBN: (纸本)0780394623

The tutorial presents state-of-the-art visualization techniques inspired by traditional technical and medical illustrations. Such techniques exploit the perception of the human visual system and provide effective visual abstractions to make the visualization clearly understandable. Visual emphasis and abstraction has been used for expressive presentation from prehistoric paintings to nowadays scientific and medical illustrations. Many of the expressive techniques used in art are adopted in computer graphics, and are denoted as illustrative or non-photorealistic rendering. Different stroke techniques, or brush properties express a particular level of abstraction. Feature emphasis or feature suppression is achieved by combining different abstraction levels in illustrative rendering. Challenges in visualization research are very large data visualization as well as multi-dimensional data visualization. To effectively convey the most important visual information there is a significant need for visual abstraction. For less relevant information the dedicated image space is reduced to enhance more prominent features. The discussed techniques in the context of scientific visualization are based on iso-surfaces and volume rendering. Apart from visual abstraction, i.e., illustrative representation, the visibility of prominent features can be achieved by illustrative visualization techniques such as cut-away views or ghosted views. The structures that occlude the most prominent information are suppressed in order to clearly see more interesting parts. A different smart way to provide information on the data is using exploded views or other types of deformation. Furthermore intuitive feature classification via 3D painting and manipulation with the classified data including label placement is presented. Discussed non-photorealistic and illustrative techniques from visualization and graphics are shown from the perspective as tools for illustrators from medicine, botany, archeology

关键词： visualization

来源：评论

学校读者我要写书评

暂无评论

Punctuated simplification of man-made objects

Punctuated simplification of man-made objects

引用

作者： Jang, Justin Wonka, Peter Ribarsky, William Shaw, Christopher D. Georgia Institute of Technology GVU Center College of Computing Atlanta GA 30332 United States Arizona State University PRISM Dept. of Computer Science and Engineering Tempe AZ 85287 United States UNC Charlotte CS Dept. Charlotte Visualization Center Charlotte NC 28223 United States Simon Fraser University Surrey School of Interactive Arts and Technology 14-660 Central City Tower 13450 102 Ave Surrey BC V3T 5X3 Canada Graphics Visualization and Usability Center Georgia Institute of Technology PRISM Lab. ASU Department of Information Technology UNC Charlotte Charlotte Visualization Center IEEE Visualization and Graphics Technical Committee School of Interactive Arts and Technology Simon Fraser University Surrey

We present a simplification algorithm for manifold polygonal meshes of plane-dominant models. Models of this type are likely to appear in man-made environments. While traditional simplification algorithms focus on generality and smooth meshes, the approach presented here considers a specific class of man-made models. By detecting and classifying edge loops on the mesh and providing a guided series of binary mesh partitions, our approach generates a series of simplified models, each of which better respects the semantics of these kinds of models than conventional approaches do. A guiding principle is to eliminate simplifications that do not make sense in constructed environments. This, coupled with the concept of "punctuated simplification", leads to an approach that is both efficient and delivers high visual quality. Comparative results are given.

关键词： Object oriented programming

来源：评论

学校读者我要写书评

暂无评论

File-formats for preservation: Evaluating the long-term stability of file-formats

File-formats for preservation: Evaluating the long-term stab...

引用

11th International Conference on Electronic Publishing, ELPUB 2007

作者： Rauch, Carl Krottmaier, Harald Tochtermann, Klaus Styria Media AG Schönaugasse 64 8010 Graz Austria Institute for Computer Graphics and Knowledge Visualization Graz University of Technology Infeldgasse 16c 8010 Graz Austria Knowledge Management Institute Graz University of Technology and Know-Center Graz Infeldgasse 21/II 8010 Graz Austria

ISBN: (纸本)9783854372929

While some file-formats become unreadable after short periods, others remain interpretable over a long-term. Among the over 1.000 file-formats, some are better and some are less suited for long-term preservation. A standardized process for evaluating the stability of a file-format is described in this paper and its practical use is shown with file-formats for 3D-objects. Recommendations to users of 3D-applications are given in the last section of this article. Some of the results are used in PROBADO, a sophisticated search engine for nontraditional objects (such as 3D-documents, music etc.).

关键词： Search engines

来源：评论

学校读者我要写书评

暂无评论

Scientific and artistic investigation of multi-dimensional fractals on the AT & T pixel machine

引用

The Visual computer 1993年第7期9卷 346-355页

作者： Hart, John C. Lescinsky, Gordon W. Sandin, Daniel J. DeFanti, Thomas A. Kauffman, Louis H. School of EECS Washington State University Pullman 99/64-2752 WA United States Advanced Computer Graphics Centre Royal Melbourne Institute of Technology Victoria Melbourne Australia Electronic Visualization Laboratory EECS Dept. M/C 154 University of Illinois at Chicago Chicago 60680-4348 IL United States

The pipelined architecture and parallel organization of the AT&T Pixel Machine image computer are described and demonstrated with applications for the visualization of multidimensional fractals, particularly linear fractals and quaternion/ stacked Julia sets. Techniques for pushing the Pixel Machine to its peak abilities are described and apply to more recent parallel image computers as well. © 1993 Springer-Verlag.

关键词： Fractals Parallelism

来源：评论

学校读者我要写书评

暂无评论

On-Line Reconstruction of CAD Geometry

On-Line Reconstruction of CAD Geometry

引用

International Conference on 3D Imaging, Modeling, Processing, visualization and Transmission (3DIMPVT)

作者： Klaus Denker Daniel Hagel Jakob Raible Georg Umlauf Bernd Hamann Computer Graphics Laboratory Department of Computer Science Konstanz University of Applied Sciences Konstanz Germany Institute for Data Analysis and Visualization Department of Computer Science University of California Davis CA USA

In reverse engineering and computer-aided design (CAD) applications point cloud data is usually manually scanned, reconstructed, and post-processed in separated steps. When point cloud data resulting from a scanning process do not satisfy certain necessary reconstruction requirements, one must perform scanning again to enable proper reconstruction. On-line reconstruction of 3d geometry allows one to generate and update a CAD reconstruction on-line during the scanning process with an hand-held laser scanner. Thus, regions where the scanned data is insufficient for the reconstruction are detected on the fly to allow an immediate correction and improvement of the scanned data. This enables the operator to focus on critical regions in the scanned data to improve the reconstruction quality. We present an on-line segmentation and on-line reconstruction of basic geometric primitives. The presented methods allow for a real-time processing of a point stream. They utilize data structures that can be updated at any time when additional data from the stream has to be processed. This data is used to complete and improve the segmentation and reconstruction during the scanning process.

关键词： Surface reconstruction Geometry Image reconstruction Shape Lasers Design automation Image segmentation

来源：评论

学校读者我要写书评

暂无评论

A comparison of rendering techniques for large 3D line sets with transparency

arXiv

引用

arXiv 2019年

作者： Kern, Michael Neuhauser, Christoph Maack, Torben Han, Mengjiao Usher, Will Westermann, Rüdiger Computer Graphics & Visualization Group Technische Universität München Garching Germany Scientific Computing and Imaging Institute University of Utah United States

This paper presents a comprehensive study of interactive rendering techniques for large 3D line sets with transparency. The rendering of transparent lines is widely used for visualizing trajectories of tracer particles in flow fields. Transparency is then used to fade out lines deemed unimportant, based on, for instance, geometric properties or attributes defined along them. Since accurate blending of transparent lines requires rendering the lines in back-to-front or front-to-back order, enforcing this order for 3D line sets with tens or even hundreds of thousands of elements becomes challenging. In this paper, we study CPU and GPU rendering techniques for large transparent 3D line sets. We compare accurate and approximate techniques using optimized implementations and a number of benchmark data sets. We discuss the effects of data size and transparency on quality, performance and memory consumption. Based on our study, we propose two improvements to per-pixel fragment lists and multi-layer alpha blending. The first improves the rendering speed via an improved GPU sorting operation, and the second improves rendering quality via a transparency-based bucketing. Copyright © 2019, The Authors. All rights reserved.

关键词： Transparency

来源：评论

学校读者我要写书评

暂无评论

Automating interface evaluation 94

Automating interface evaluation

引用

Conference Companion on Human Factors in Computing Systems

作者： Michael D. Byrne D. Wood Piyawadee Sukaviriya James D. Foley David Kieras Graphics Visualization and Usabitity Center Georgia Institute of Technology Atlanta GA Electrical Engineering and Computer Science Department University of Michigan Ann Arbor MI

No abstract available.

ISBN: (纸本)9780897916516

No abstract available.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Head-tracked orbital viewing: an interaction technique for immersive virtual environments 96

Head-tracked orbital viewing: an interaction technique for i...

引用

Proceedings of the 9th annual ACM symposium on User interface software and technology

作者： David R. Koller Mark R. Mine Scott E. Hudson Graphics Visualization & Usability Center College of Comuputing Georgia Institute of Technology Atlanta GA Department of Computer Science University of North Carolira Chapel Hill NC

No abstract available.

ISBN: (纸本)9780897917988

No abstract available.

关键词： interaction metaphors head-tracking viewpoint selection steering virtual environments

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：