检索结果-内蒙古大学图书馆

Data-driven output regulation control for constrained linear systems

science China(Information sciences) 2025年第3期68卷 338-353页

作者： Chaoyu XIA Yi DONG Chaoli WANG Shengyuan XU Shanghai Research Institute for Intelligent Autonomous Systems Tongji University College of Electronic and Information Engineering Shanghai Research Institute for Intelligent Autonomous SystemsTongji University Department of Control Science and Engineering School of Optical-Electrical and Computer EngineeringUniversity of Shanghai for Science and Technology Department of Automation Nanjing University of Science and Technology

This study introduces a data-driven approach for state and output feedback control addressing the constrained output regulation problem in unknown linear discrete-time systems. Our method ensures effective tracking performance while satisfying the state and input constraints, even when system matrices are not available. We first establish a sufficient condition necessary for the existence of a solution pair to the regulator equation and propose a data-based approach to obtain the feedforward and feedback control gains for state feedback control using linear programming. Furthermore, we design a refined Luenberger observer to accurately estimate the system state, while keeping the estimation error within a predefined set. By combining output regulation theory, we develop an output feedback control strategy. The stability of the closed-loop system is rigorously proved to be asymptotically stable by further leveraging the concept of λ-contractive sets.

关键词： output regulation constrained system data-driven.

来源：评论

学校读者我要写书评

暂无评论

Dynamic Regret for Distributed Online Composite Optimization

引用

IEEE Transactions on Automatic Control 2025年第5期70卷 3056-3071页

作者： Hou, Ruijie Yu, Yang Li, Xiuxian Tongji University Department of Control Science and Engineering College of Electronics and Information Engineering Shanghai201800 China Tongji University Shanghai Research Institute for Intelligent Autonomous Systems National Key Laboratory of Autonomous Intelligent Unmanned Systems Frontiers Science Center for Intelligent Autonomous Systems Ministry of Education Shanghai Institute of Intelligent Science and Technology Shanghai201210 China

This article focuses on online composite optimization over multiagent networks. In the distributed setting, each agent has its own local loss function, which consists of a convex, strongly convex or strongly convex and smooth function, and a time-varying nonsmooth regularizer. Two distributed online algorithms are proposed and corresponding dynamic regrets are analyzed. Two proposed algorithms are based on signs of relative states. The first algorithm obtains (Formula presented) dynamic regret bound when each local loss is a general convex composite function, where CT is the path variation. If CT can be estimated in advance for convex or strongly convex local loss with a time-varying nonsmooth regularizer, then dynamic regret bounds are, respectively, in the order of (Formula presented) and o (log T(1 + CT)). The second algorithm is based on the first one, especially for handling the local loss composed of a strongly convex and smooth function with a nonsmooth regularizer, and then obtains o (1 + CT) dynamic regret bound. In the end, numerical results are given to support the theoretical findings. © 1963-2012 IEEE.

关键词： Optimization algorithms

来源：评论

学校读者我要写书评

暂无评论

Recent advances in photopolymerization 3D printing of alumina-ceramic

引用

Progress in Natural science:Materials International 2025年第1期35卷 1-30页

作者： M.Irfan Hussain Min Xia XiaoNa Ren Zhen Shen Muhammad Jamil Changchun Ge Institute of Powder Metallurgy and Advanced Ceramics School of Material Science and Engineering University of Science and Technology Beijing State Key Laboratory of Multimodal Artificial Intelligence Systems Beijing Engineering Research Center of Intelligent Systems and Technology Institute of AutomationChinese Academy of Sciences College of Mechanical and Electrical Engineering Nanjing University of Aeronautics and Astronautics

Digital light processing(DLP) 3D printing has a huge potential for manufacturing intricate and customized ceramic parts with high precision and cost-effectiveness. Research in this field contributes to material innovation,opening the avenues for new process designs in both scientific and industrial sectors. However, the implementation of DLP 3D printing technology in ceramic research has not yet reached the maturity level as that in polymer and tissue engineering. Necessarily, a holistic in-depth literature reporting the successful integration of alumina ceramics within DLP 3D printing technology is urgently needed. This review, systematic examines recent progress in DLP technology, focusing on photopolymer resins that incorporate UV-sensitive monomers, photoinitiators, and dispersants, as well as their synergistic effects on achieving high-quality printing, desirable material properties, and enhanced performance. Further, the review discusses key factors including post-processing characteristics such as debinding and sintering, which influence microstructure, and defect formation including microcracks, porosity and voids. Finally, the challenges associated with printing and sintering are highlighted,aiming to identify focused focused development pathways and potential solution to optimize outcomes. This analysis clarifies existing challenges and also propsoes future applications for DLP technology in the aluminaceramic field.

关键词： Al2O3 ceramics Applications Digital light processing (DLP) Post-processing Resin

来源：评论

学校读者我要写书评

暂无评论

Enhancing rheology and mechanical properties of DLP 3D-printed Si_(3)N_(4)materials via composition optimization and gas-pressure sintering

引用

International Journal of Minerals,Metallurgy and Materials 2025年第5期32卷 1220-1233页

作者： Qing Qin Gang Xiong Lin Han Yujuan Zhang Zhen Shen Changchun Ge Institute of Powder Metallurgy and Advanced Ceramics School of Materials Science and EngineeringUniversity of Science and Technology BeijingBeijing 100083China State Key Laboratory of Multimodal Artificial Intelligence Systems Beijing Engineering Research Center of Intelligent Systems and TechnologyInstitute of AutomationChinese Academy of SciencesBeijing 100190China

Digital light processing(DLP)is a crucial additive manufacturing(AM)technique for producing high-precision ceramic *** study aims to optimize the formulation of Si_(3)N_(4)slurry to enhance both its performance and manufacturability in the DLP process,and investigate key factors such as particle size distribution,photopolymer resin monomer ratios,and dispersant types to im-prove the slurry’s rheological *** these optimizations,a photosensitive Si_(3)N_(4)slurry with 50vol%solid content was de-veloped,exhibiting excellent stability,and low viscosity(2.48 Pa·s at a shear rate of 12.8 s^(-1)).The effects of gas-pressure sintering on the material’s phase composition,microstructure,and mechanical properties were further explored,revealing that this technique significantly increases the flexural strength of the green sample from(109±10.24)to(618±42.15)*** sintered ceramics exhibited high hard-ness((16.59±0.05)GPa)and improved fracture toughness((4.45±0.03)MPa·m^(1/2)).Crack trajectory analysis revealed that crack deflec-tion,crack bridging,and the pull-out of rod-likeβ-Si_(3)N_(4)grains,are the main toughening mechanisms,which could effectively mitigate crack *** these mechanisms,crack deflection and bridging were particularly influential,significantly enhancing the frac-ture toughness of the Si_(3)N_(4)***,this research highlights how monomer formulation and gas-pressure sintering strengthen the performance of Si_(3)N_(4)slurry in the DLP three-dimensional printing *** work is expected to provide new insights for fabricat-ing complex Si_(3)N_(4)ceramic components with superior mechanical properties.

关键词： additive manufacturing Si_(3)N_(4)slurry low viscosity pressure sintering

来源：评论

学校读者我要写书评

暂无评论

Time-Varying Formation Tracking Control of Heterogeneous Multi-Agent systems With Intermittent Communications and Directed Switching Networks

引用

IEEE/CAA Journal of Automatica Sinica 2025年第1期12卷 294-296页

作者： Yuhan Wang Zhuping Wang Hao Zhang Huaicheng Yan the Shanghai Research Institute for Intelligent Autonomous Systems Tongji University the National Key Laboratory of Autonomous Intelligent Unmanned Systems the Frontiers Science Center for Intelligent Autonomous System of Ministry of Education the College of Electronic and Information Engineering the Department of Control Science and Engineering Tongji University the Key Laboratory of Advanced Control and Optimization for Chemical Processes of Ministry of Education the School of Information Science and Engineering East China University of Science and Technology

Dear Editor,This letter is concerned with the problem of time-varying formation tracking for heterogeneous multi-agent systems(MASs) under directed switching networks. For this purpose, our first step is to present so... 详细信息

关键词： Switches Topology Observers Formation control Event detection Switched systems Multi-agent systems Control theory Autonomous systems Stability

来源：评论

学校读者我要写书评

暂无评论

Improved Deadbeat Predictive Direct Power Control for Three-Phase PWM Rectifier With Reduced DC Voltage Fluctuation Based on LADRC

引用

IEEE Journal of Emerging and Selected Topics in Power Electronics 2025年第2期13卷 1879-1890页

作者： Ma, He Yao, Xuliang Wang, Jingfang Luo, Xinghong Huang, Shengqi Harbin Engineering University College of Intelligent Systems Science and Engineering Harbin150001 China Shanghai Marine Equipment Research Institute Shanghai201203 China

Three-phase voltage-source pulsewidth modulation (PWM) rectifiers with deadbeat predictive direct power control (PDPC) have been extensively studied for their simple concept and satisfactory performance. However, conventional deadbeat PDPC strategies exhibit a slow dynamic response to load disturbances and demonstrate active power errors under steady-state conditions. To enhance the dynamic response, this article proposes a linear active disturbance rejection control (LADRC) with an adaptive virtual capacitance (AVC) method in the outer voltage loop. This enhancement provides a virtual active power component that enables immediate power tracking under load disturbances. In addition, a feedback correction method is implemented to predict the active power reference accurately and eliminate steady-state active power error. The design of parameters, disturbance rejection capabilities, and stability analysis of the proposed LADRC with adaptive virtual capacitance and feedback correction (LADRC-AVCFD) strategy are presented comprehensively. A 1.5-kW prototype was constructed, and experimental results indicate a complete elimination of steady-state active power errors, a 75% reduction in dc voltage fluctuations, and an 81% decrease in settling time under load disturbances. © 2013 IEEE.

关键词： Disturbance rejection

来源：评论

学校读者我要写书评

暂无评论

An interaction-fair semi-decentralized trajectory planner for connected and autonomous vehicles

引用

Autonomous intelligent systems 2025年第1期5卷 1-20页

作者： Liu, Zhengqin Lei, Jinlong Yi, Peng Hong, Yiguang Department of Control Science and Engineering Tongji University Shanghai201804 China The Shanghai Research Institute for Intelligent Autonomous Systems Shanghai201804 China Shanghai Institute of Intelligent Science and Technology Tongji University Shanghai201804 China

Lately, there has been a lot of interest in game-theoretic approaches to the trajectory planning of autonomous vehicles (AVs). But most methods solve the game independently for each AV while lacking coordination mechanisms, and hence result in redundant computation and fail to converge to the same equilibrium, which presents challenges in computational efficiency and safety. Moreover, most studies rely on the strong assumption of knowing the intentions of all other AVs. This paper designs a novel autonomous vehicle trajectory planning approach to resolve the computational efficiency and safety problems in uncoordinated trajectory planning by exploiting vehicle-to-everything (V2X) technology. Firstly, the trajectory planning for connected and autonomous vehicles (CAVs) is formulated as a game with coupled safety constraints. We then define the interaction fairness of the planned trajectories and prove that interaction-fair trajectories correspond to the variational equilibrium (VE) of this game. Subsequently, we propose a semi-decentralized planner for the vehicles to seek VE-based fair trajectories, in which each CAV optimizes its individual trajectory based on neighboring CAVs’ information shared through V2X, and the roadside unit takes the role of updating multipliers for collision avoidance constraints. The approach can significantly improve computational efficiency through parallel computing among CAVs, and enhance the safety of planned trajectories by ensuring equilibrium concordance among CAVs. Finally, we conduct Monte Carlo experiments in multiple situations at an intersection, where the empirical results show the advantages of SVEP, including the fast computation speed, a small communication payload, high scalability, equilibrium concordance, and safety, making it a promising solution for trajectory planning in connected traffic scenarios. To the best of our knowledge, this is the first study to achieve semi-distributed solving of a game with coupled constr

关键词： Autonomous vehicles

来源：评论

学校读者我要写书评

暂无评论

SSFold: Learning to Fold Arbitrary Crumpled Cloth Using Graph Dynamics From Human Demonstration

引用

IEEE Transactions on Automation science and engineering 2025年 22卷 14448-14460页

作者： Zhou, Changshi Xu, Haichuan Hu, Jiarui Luan, Feng Wang, Zhipeng Dong, Yanchao Zhou, Yanmin He, Bin Tongji University Shanghai Research Institute for Intelligent Autonomous Systems National Key Laboratory of Autonomous Intelligent Unmanned Systems Shanghai201210 China Frontiers Science Center for Intelligent Autonomous Systems Shanghai201210 China Tongji University College of Electronics and Information Engineering Shanghai201804 China Tongji University National Key Laboratory of Autonomous Intelligent Unmanned Systems Shanghai201210 China

Robotic cloth manipulation poses significant challenges due to the fabric’s complex dynamics and the high dimensionality of configuration spaces. Previous approaches have focused on isolated smoothing or folding tasks and relied heavily on simulations, often struggling to bridge the sim-to-real gap. This gap arises as simulated cloth dynamics fail to capture real-world properties such as elasticity, friction, and occlusions, causing accuracy loss and limited generalization. To tackle these challenges, we propose a two-stream architecture with sequential and spatial pathways, unifying smoothing and folding tasks into a single adaptable policy model. The sequential stream determines pick-and-place positions, while the spatial stream, using a connectivity dynamics model, constructs a visibility graph from partial point cloud data, enabling the model to infer the cloth’s full configuration despite occlusions. To address the simto-real gap, we integrate real-world human demonstration data via a hand-tracking detection algorithm, enhancing real-world performance across diverse cloth configurations. Our method, validated on a UR5 robot across six distinct cloth folding tasks, consistently achieves desired folded states from arbitrary crumpled initial configurations, with success rates of 100.0%, 100.0%, 83.3%, 66.7%, 83.3%, and 66.7%. It outperforms state-of-the-art cloth manipulation techniques and generalizes to unseen fabrics with diverse colors, shapes, and stiffness. Project page: https:// ***/SSFold/ a novel framework for robotic cloth manipulation that integrates human demonstrations with advanced learning techniques, providing a practical solution for real-world applications. Practitioners in industries such as textile manufacturing, automated laundry services, and even medical fabric handling can leverage this method to improve operational efficiency and reduce reliance on manual labor significantly. By using a two-stream architecture to handle comple

关键词： Demonstrations

来源：评论

学校读者我要写书评

暂无评论

Chattering-Free Fault-Tolerant Cluster Control and Fault Direction Identification for HIL UAV Swarm With Pre-Specified Performance

引用

IEEE/CAA Journal of Automatica Sinica 2025年第1期12卷 183-197页

作者： Pei-Ming Liu Xiang-Gui Guo Jian-Liang Wang Daniel Coutinho Lihua Xie the Beijing Engineering Research Center of Industrial Spectrum Imaging School of Automation and Electrical Engineering University of Science and Technology Beijing the Shunde Graduate School of University of Science and Technology Beijing IEEE Autonomous Intelligent Systems Department Hangzhou Innovation Institute of Beihang University the Department of Automation and Systems Universidade Federal de Santa Catarina the School of Electrical and Electronic Engineering Nanyang Technological University

In this paper, the problem of pre-specified performance fault-tolerant cluster consensus control and fault direction identification is solved for the human-in-the-loop(HIL) swarm unmanned aerial vehicles(UAVs) in the presence of possible nonidentical and unknown direction faults(NUDFs) in the yaw *** control strategy begins with the design of a pre-specified performance event-triggered observer for each individual *** observers estimate the outputs of the human controlled UAVs, and simultaneously achieve the distributed design of actual control signals as well as cluster consensus of the observer *** is worth mentioning that these observers require neither the high-order derivatives of the human controlled UAVs' output nor a priori knowledge of the initial conditions. The fault-tolerant controller realizes the pre-specified performance output regulation through error transformation and the Nussbaum function. It should be pointed out that there are no chattering caused by the jump of the Nussbaum function when a reverse fault occurs. In addition, to provide a basis for further solving the problem of physical malfunctions, a fault direction identification algorithm is proposed to accurately identify whether a reverse fault has occurred. Simulation results verify the effectiveness of the proposed control and fault direction identification strategies when the reverse faults occur.

关键词： Chattering-free cluster consensus fault direction identification human-in-the-loop (HIL) nonidentical and unknown direction faults (NUDFs) pre-specified performance swarm unmanned aerial vehicles (UAVs)

来源：评论

学校读者我要写书评

暂无评论

An Efficient Beam Synthesis Method with Coupling Compensation in Wideband Tightly Coupled Arrays

引用

IEEE Transactions on Antennas and Propagation 2025年第5期73卷 3156-3166页

作者： Ma, Jinyan Li, Da Li, Ruifeng Li, Er-Ping ZJU-UIUC Institute Zhejiang Provincial Key Laboratory of Advanced Microelectronic Intelligent Systems and Applications the College of Information Science and Electronic Engineering Zhejiang University Hangzhou310027 China

Wideband tightly coupled arrays (WTCAs) are essential components of modern advanced communication systems. However, the inevitable mutual coupling will lead to severe beam deterioration problems and heavy computational costs. This paper introduces a notable and efficient beam synthesis methodology for WTCAs with coupling characterization and compensation. Specifically, the mutual coupling is represented by the modal excitation coefficients via the generalized mutual impedance, which is efficiently obtained by the proposed full-wave partial element equivalent circuit method within a wide frequency band. Notably, this hybrid method demonstrates robustness in achieving beampattern calculation compared to traditional full-wave analysis methods. Subsequently, the modified excitation factor (MEF) is proposed to compensate the beampattern deterioration caused by coupling. Furthermore, a frequency-dependent tandem architecture is employed to enable real-time beam synthesis for WTCAs. Based on the MEF and tandem architecture, the proposed methodology shows excellent performance to address the challenges of beam deterioration and real-time beam synthesis. Finally, the versatility and efficiency of the proposed framework are comprehensively demonstrated through some numerical examples. © 2025 institute of Electrical and Electronics Engineers Inc.. All rights reserved.

关键词： Equivalent circuits

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：