检索结果-内蒙古大学图书馆

Symposium on integrated Circuits and systems design (SBCCI)

作者： N. Nedovic V.G. Oklobdzija Advanced Computer System Design Laboratory Department of Electrical and Computer Engineering University of California Davis CA USA

An improved design of a hybrid latch flip-flop is presented. The proposed design overcomes the problem of the glitch at the output and reduces the power consumption and delay of the circuit resulting in a total power-delay-product improvement of about 20%. It also exhibits better soft-clock edge properties compared to the original circuit. This is accomplished by careful design of keeper elements and introducing the feedback path to suppress unnecessary transitions in the circuit. The new design introduces an insignificant area increase.

关键词： Flip-flops Latches Energy consumption Delay Feedback circuits Power dissipation Clocks Power engineering computing Laboratories State feedback

来源：评论

学校读者我要写书评

暂无评论

Operational systems, logistics engineering and technology insertion

引用

NAVAL ENGINEERS JOURNAL 1997年第3期109卷 205-220页

作者： Grubb, MJ Skolnick, A Michael J. Grubb:has perfomzed naval engineering at the Crane Division Naval Surface Warfare Center (NSWC) for more than twenty-five years. He currently the program manager for the Sustainable Hardware and Affordable Readiness Practice Program (SHARP). is a Navy-wide logistics research and development prgram aimed at the successful transiton of proved technologies inot the fleet. SHARP focuses on reducing acquisition performance capability reliability maintainability and readiness of these systems. Mr. Grubb has served as a department director for the past eleven years. His most recent assignment was as director of the Tactical Computer Resources and Test Equipment Department. This organization provided acquisition and in-service engineering support of the Navy's tectical embedded computers priphirals displays and mass memory storage devices. The organization also provided a complete range of product engineering and metrology engineerig services for SSP NevSeaSysCom and the Trident Program. Prior to this appointment Mr. Grubb was deptuy director psysical security programs department and site responsible for program management and system integration of ashore integrated security systems. Mr. Grubb holds a B.S. degree in industrial engineering from Iowa State Universtiy an M.S. degree in industrial engineering from Purdue University and has copleted the course work (Dec.'96 for a master's degree in public and environment affairs at Indiana University-Purdue Univeristy Indianapolis. Dr. Alfred Skolnick operates System Science Consultants (SSC) specilizing in strategic planning technical program definiton technology assessment and engineering analyses on selected matters of national interest. He has taught physics mathematics and management sciences at University of Virginia and Marymount University and is currently adjunct professor of mathematics at Northern Virginia Community College. Form 1985 to 1989 he was president of the American Society of Noval Engineers. Dr. Skolnick served at Applied Physic

In an era of fiscal austerity, downsizing and unforgiving pressure upon human and economic capital, it is an Augean task to identify resources for fresh and creative work. The realities of the day and the practical demands of more immediate fleet needs can often dictate higher priorities. Yet, the Navy must avoid eating its seed corn. Exercising both technical insight and management foresight, the fleet, the R&D community, the Office of the Chief of Naval Operations (OpNav) and the product engineering expertise of the Naval Surface Warfare Center (NSWC) are joined and underway with integrated efforts to marry new, fully demonstrated technologies and operational urgencies. Defense funding today cannot sponsor all work that can be mission-justified over the long term because budgets are insufficient to support product maturation within the classical development cycle. However, by rigorous technical filtering and astute engineering of both marketplace capabilities and currently available components, it is possible in a few select cases to compress and, in effect, integrate advanced development (6.3), engineering development (6.4), weapon procurement (WPN), ship construction (SCN), operation and maintenance (O&M,N) budgetary categories when fleet criticalities and technology opportunities can happily meet. In short, 6.3 funds can be applied directly to ''ripe gateways'' so modern technology is inserted into existing troubled or aging systems, sidestepping the lengthy, traditional development cycle and accelerating practical payoffs to recurrent fleet problems. To produce such constructive results has required a remarkable convergence of sponsor prescience and engineering workforce excellence. The paper describes, extensively, the philosophy of approach, transition strategy, polling of fleet needs, technology assessment, and management team requirements. The process for culling and selecting specific candidate tasks for SHARP sponsorship (matching operational need with t

关键词： Naval vessels

来源：评论

学校读者我要写书评

暂无评论

Influence of human engineering on manning levels and human performance on ships

引用

NAVAL ENGINEERS JOURNAL 1997年第5期109卷 67-76页

作者： Anderson, DE Oberman, FR Malone, TB Baker, CC David E. Anderson:has a bachelor of science degree in environmental engineering from Florida Technological University and a master's degree in environmental engineering from the University of Central Florida. He is a graduate of the Naval Sea Systems Command's Engineer-In-Training (EIT) Program. Mr. Anderson was instrumental in introducing the collective protection system (CPS) in the U.S. Navy developing the initial forward-fit package for the USS Gunston Hall and the engineering change proposal (ECP) for the USS Wasp. In 1990 he joined the Human Systems Integration (HSI) Division (SEA 55W5) where he was task leader for auxiliary ships. He is currently the HSI manager for the future technology variant of the SeaLift ship and the future carrier. Association of Scientists and Engineers 33rdAnnual Technical Symposium 26 April 1996. Fred R. Oberman:has B.A. and M.A. degrees from the University of Chicago and Loyola University (experimental psychology) and an M.S. degree in industrial engineering and operations research from Virginia Polytechnic Institute (VPI). He has more than 30 years experience in HSI management planning research analysis design and testing in government and private sector positions. He is currently responsible for NavSea HSI generic research and tool development efforts. He is responsible for Human Engineering Specifications and Standards (Commercial Hypertext) and is the NavSea 03D7 representative on HSI in Performance Specifications and for integration of HSI within Integrated Logistic Support (ILS). He has served as DoD HSI SubTAG chair and member of the Simulation and Modeling Test and Evaluation Display and Control Systems Human Computer Interaction Specifications and Standards and Systems Design Sub Tags as a member of the Society of Naval Architects and Marine Engineers (SNAME) Systems Safety Panel and a member of NATO RSG 14 on man-machine analysis. Thomas B. Malone: CHFEP received a Ph.D. in experimental psychology from Fordham University in 1964. He is president of Carlow

The objectives of Human engineering (HE) are generally viewed as increasing human performance, reducing human error, enhancing personnel and equipment safety, and reducing training and related personnel costs. There are other benefits that are thoroughly consistent with the direction of the Navy of the future, chief among these is reduction of required numbers of personnel to operate and maintain Navy ships. The Naval Research Advisory Committee (NRAC) report on Man-Machine Technology in the Navy estimated that one of the benefits from increased application of man-machine technology to Navy ship design is personnel reduction as well as improving system availability, effectiveness, and safety The objective of this paper is to discuss aspects of the human engineering design of ships and systems that affect manning requirements, and impact human-performance and safety The paper will also discuss how the application of human engineering leads to improved performance, and crew safety, and reduced workload, all of which influence manning levels. Finally, the paper presents a discussion of tools and case studies of good human engineering design practices which reduce manning.

关键词： Human engineering

来源：评论

学校读者我要写书评

暂无评论

design AND FABRICATION OF MICROELECTROMECHANICAL systemS

引用

JOURNAL OF MECHANICAL design 1994年第4期116卷 1081-1088页

作者： KOTA, S ANANTHASURESH, GK CRARY, SB WISE, KD Design Laboratory Department of Mechanical Engineering and Applied Mechanics University of Michigan Ann Arbor MI 48109 Center for Integrated Sensors and Circuits Solid-State Electronics Laboratory Department of Electrical Engineering and Computer Science University of Michigan Ann Arbor MI 48109

An attempt has been made to summarize some of the important developments in the emerging technology of microelectromechanical systems (MEMS) from the mechanical engineering perspective. In the micro domain, design and fabrication issues are very much different from those of the macro world. The reason for this is twofold. First, the limitations of the micromachining techniques give way to new exigencies that are nonexistent in the macromachinery. One such difficulty is the virtual loss of the third dimension, since most of the microstructures are fabricated by integrated circuit based micromachining techniques that are predominantly planar. Second, the batch-produced micro structures that require no further assembly, offer significant economical advantage over their macro counterparts. Furthermore, electronic circuits and sensors can be integrated with micromechanical structures. In order to best utilize these features, it becomes necessary to establish new concepts for the design of MEMS. Alternate physical forms of the conventional joints are considered to improve the manufacturability of micromechanisms and the idea of using compliant mechanisms for micromechanical applications is put forth. The paper also reviews some of the fabrication techniques and the micromechanical I devices that have already been made. In particular, it discusses the fabrication of a motor-driven four-bar linkage using the ''boron-doped bulk-silicon dissolved- wafer I process'' developed at The University of Michigan's Center for integrated Sensors and Circuits.

关键词： Micromechanical devices Semiconductor wafers Boron Mechanical engineering Linkages Dimensions integrated circuits Micromachining Electronic circuits Microelectromechanical systems Circuits Compliant mechanisms Sensors Motors Silicon design Manufacturing Engines

来源：评论

学校读者我要写书评

暂无评论

PERFORMANCE OF A PRIORITIZED ON-BOARD BASEBAND SWITCH FOR A MULTISERVICE MULTIBEAM SATELLITE

引用

INTERNATIONAL JOURNAL OF SATELLITE COMMUNICATIONS 1994年第3期12卷 283-297页

作者： BOHM, S ELHAKEEM, AK HACHICHA, M Department of Electrical and Computer Engineering Concordia University 1455 De Maisonneuve Blvd. West Montreal H3A 1M8 Canada Was born in Montreal Canada on 14 September 1966. He received the B. Eng. degree in electrical engineering from Concordia University Montreal Canada in 1989. He is at present completing the M.A.Sc. degree in electrical engineering at Concordia University. (S'75–S'79–M'79–SM'86) received the Ph.D. degree from Southern Methodist University Dallas TX in 1979. He spent the next two years working as a Visiting Professor in Egypt after which he moved to Ottawa Canada in 1982. He assumed teaching and research positions in Carleton and Manitoba Univerities and later moved to Concordia University Montreal Canada in 1983 where he is now a Professor in the Electrical and Computer Engineering Department. He has published numerous papers in IEEE and international journals in the areas of spread spectrum and networking. He is a well-known expert in these areas and serves as a consultant to many companies. His current research interests include wide-band metropolitan networks switching architectures and performance of on-board multibeam satellites acquisitionless CDMA networks code distribution and orthogonalization of CDMA signals responsive congestion control for ATM-based networks ARQ techniques and investigation of the novel SUGAR CDMA systems in fading channels. Dr. Elhakeem is a Senior Member of the Canadian Electrical Engineering Society and Armed Forces Association. He has chaired numerous technical sessions in IEEE Conferences was the Technical Program Chairman for IEEE Montech 1986 Montreal Canada. Dr. Elhakeem is the key guest editor of theIEEE Journal of Selected Areas in Communicationsfor the May June issues 1993 covering CDMA networks. Advanced Technology & Networks VISTAR Telecommunications Inc. Ottawa Ontario K1G 3J4 Canada An Associate Director of Advanced Technology & Networks Group VISTAR Telecommunications Inc. Ottawa Canada. He is also an Adjunct Pr

In this paper, we study the performance of a prioritized on-board baseband switch in conjunction with a multibeam satellite handling integrated services. The services considered for the analysis include voice, video, file transfer and interactive data. The prioritized switch uses both input and output buffering, switch speed-up as well as a two-phase head-of-line resolution algorithm, in order to reduce the buffer loss while maintaining acceptable user delays. The minimum required buffer capacity and switch speed-up for each service in a prioritized environment are found under uniform traffic conditions. It is shown that under uniform traffic conditions, only minimal buffering and switch speed-up are needed even for the lowest priority users. The performance dependence on the switch size is also substantially reduced with head of line resolution and buffering even in a prioritized environment.

关键词： SWITCH ON-BOARD BASEBAND MULTIBEAM PRIORITIZED HEAD-OF-LINE UNIFORM LOAD SPEED-UP

来源：评论

学校读者我要写书评

暂无评论

Efficient test generation for built-in self-test boundary-scan template

Efficient test generation for built-in self-test boundary-sc...

引用

1991 IEEE VLSI Test Symposium: Chip-to-system Test Concerns for the 90''s, VTEST 1991

作者： Nagvajara, P. Karpovsky, M.G. Levitin, L.B. Dept. of Electr. and Comput. Eng. Drexel Univ. PhiladelphiaPA United States Research Laboratory for Design and Testing of Computer and Communication Systems Department of Electrical Computer and System Engineering Boston University United States

An analysis and design of a pseudorandom pattern generator, (PRPG), based on a linear recurrence, for built-in self-test (BIST) boundary scan design is presented. The authors present for the case when r≥s, a design of an s-stage PRPG capable of producing 2s-1 distinct r-bit patterns within 2s-1 clock pulses independent of the hardware realization of the PRPG. For the case when rr distinct r-bit patterns and the expected number T(N) of distinct patterns given a number N of clock pulses were presented. The proposed theoretical average N(T) was shown to be close to the experimental average values Nex(T). Hence, the value N(T) or T(N) can be used as a benchmark for evaluating the efficiency of a BIST boundary scan test generation. © 1991 IEEE.

关键词： Built-in self test

来源：评论

学校读者我要写书评

暂无评论

Efficient test generation for built-in self-test boundary-scan template

Efficient test generation for built-in self-test boundary-sc...

引用

VLSI Test Symposium

作者： P. Nagvajara M.G. Karpovsky L.B. Levitin Department of Electrical and Computer Engineering Drexel University Philadelphia PA USA Research Laboratory for Design and Testing of Computer and Communication Systems Department of Electrical Computer and System Engineering Boston University Boston MA USA

关键词： Automatic testing Built-in self-test Circuit testing Clocks Test pattern generators Pulse generation Pattern analysis Laboratories system testing design engineering

来源：评论

学校读者我要写书评

暂无评论

FULL-WAVE SOLUTION OF DIELECTRIC LOADED WAVE-GUIDES AND SHIELDED MICROSTRIPS UTILIZING FINITE-DIFFERENCE AND THE CONJUGATE-GRADIENT METHOD

引用

INTERNATIONAL JOURNAL OF MICROWAVE AND MILLIMETER-WAVE computer-AIDED engineering 1991年第4期1卷 346-357页

作者： NARAYANAN, V MANELA, M LADE, RK SARKAR, TK Department of Electrical and Computer Engineering Syracuse University Syracuse New York 13244-1240 Viswanathan Narayanan was born in Bangalore India on December 14 1965. He received the BE degree in Electronics and Communications from B.M.S. College of Engineering Bangalore in 1988. He joined the Department of Electrical Engineering at Syracuse University for his graduate studies in 1989 where he is currently a research assistant. His research interests are in microwave measurements numerical electromagnetics and signal processing. Biographies and photos are not available for M. Manela and R. K. Lade. Tapan K. Sarkar (Sf69-M'76-SM'X1) was born in Calcutta. India on August 2 1948. He received the BTech degree from the Indian Institute of Technology Kharagpur India in 1969 the MScE degree from the University of New Brunswick Fredericton Canada in 1971. and the MS and PhD degrees from Syracuse University. Syracuse NY in 1975. From 1975-1976 he was with the TACO Division of the General Instruments Corporation. He was with the Rochester Institute of Technology (Rochester NY) from 1976-1985. He was a Research Fellow at the Gordon Mckay Laboratory Harvard University Cambridge MA from 1977 to 1978. He is now a Professor in the Department of Electrical and Computer Engineering Syracuse University. His current research interests deal with numerical solutions of operator equations arising in electromagnetics and signal processing with application to system design. He obtained one of the “ best solution” awards in May 1977 at the Rome Air Development Center (RADC) Spectral Estimation Workshop. He has authored or coauthored more than 154 journal articles and conference papers and has written chapters in eight books. Dr. Sarkar is a registered professional engineer in the state of New York. He received the Best Paper Award of the IEEE Transactions on Electromagnetic Compatibility in 1979. He was an Associate Editor for feature articles of the lEEE Antennas arid Propagation Sociefy Newsletter and was

Dynamic analysis of waveguide structures containing dielectric and metal strips is presented. The analysis utilizes a finite difference frequency domain procedure to reduce the problem to a symmetric matrix eigenvalue problem. Since the matrix is also sparse, the eigenvalue problem can be solved quickly and efficiently using the conjugate gradient method resulting in considerable savings in computer storage and time. Comparison is made with the analytical solution for the loaded dielectric waveguide case. For the microstrip case, we get both waveguide modes and quasi-TEM modes. The quasi-TEM modes in the limit of zero frequency are checked with the static analysis which also uses finite difference. Some of the quasi-TEM modes are spurious. This article describes their origin and discusses how to eliminate them. Numerical results are presented to illustrate the principles.

关键词： Waveguides

来源：评论

学校读者我要写书评

暂无评论

MAGNETOHYDRODYNAMIC SUBMARINE PROPULSION systemS

引用

NAVAL ENGINEERS JOURNAL 1991年第3期103卷 141-157页

作者： SWALLOM, DW SADOVNIK, I GIBBS, JS GUROL, H NGUYEN, LV VANDENBERGH, HH Daniel W. Swallomis the director of military power systems at Avco Research Laboratory Inc. a subsidiary of Textron Inc. in Everett Mass. Dr. Swallom received his B.S. M.S. and Ph.D. degrees in mechanical engineering from the University of Iowa Iowa City Iowa in 1969 1970 and 1972 respectively. He has authored numerous papers in the areas of power propulsion and plasma physics and currently is a member of the Aerospace Power Systems Technical Committee of the AIAA. Dr. Swallom has directed various programs for the development of advanced power generation systems lightweight power conditioning systems and advanced propulsion systems for marine applications. His previous experience includes work with Odin International Corporation Maxwell Laboratories Inc. Argonne National Laboratory and the Air Force Aero Propulsion Laboratory. Currently Dr. Swallom is directing the technical efforts to apply magnetohydrodynamic principles to a variety of propulsion and power applications for various marine vehicles and power system requirements respectively. Isaac Sadovnikis a principal research engineer in the Energy Technology Office at Avco Research Laboratory Inc. a subsidiary of Textron Inc. He received his B.S. in engineering (1974) B.S. in physics (1975) M.S. in aeronautics and astronautics (1976) and Ph.D. in physics of fluids (1981) at the Massachusetts Institute of Technology. Dr. Sadovnik has been involved in research work funded by DARPA concerning the use of magnetohydrodynamics for underwater propulsion. He has built theoretical models that predict the hydrodynamic behavior of seawater flow through magnetohydrodynamic ducts and their interaction with the rest of the vehicle (thrust and drag produced). In addition Dr. Sadovnik has been involved in research investigations geared toward the NASP program concerning the use of magnetohydrodynamic combustion-driven accelerator channels. Prior to joining Avco Dr. Sadovnik was a research assistant at MIT where he conducted experimental and

Magnetohydrodynamic propulsion systems for submarines offer several significant advantages over conventional propeller propulsion systems. These advantages include the potential for greater stealth characteristics, increased maneuverability, enhanced survivability, elimination of cavitation limits, greater payload capability, and the addition of a significant emergency propulsion system. These advantages can be obtained with a magnetohydrodynamic propulsion system that is neutrally bouyant and can operate with the existing submarine propulsion system power plant. A thorough investigation of magnetohydrodynamic propulsion systems for submarine applications has been completed. During the investigation, a number of geometric configurations were examined. Each of these configurations and mounting concepts was optimized for maximum performance for a generic attack class submarine. The optimization considered each thruster individually by determining the optimum operating characteristics for each one and accepting only those thrusters that result in a neutrally buoyant propulsion system. The results of this detailed optimization study show that the segmented, annular thruster is the concept with the highest performance levels and greatest efficiency and offers the greatest potential for a practical magnetohydrodynamic propulsion system for attack class submarines. The optimization study results were used to develop a specific point design for a segmented, annular magnetohydrodynamic thruster for an attack class submarine. The design point case has shown that this thruster may be able to provide the necessary thrust to propel an attack class submarine at the required velocity with the potential for a substantial acoustic signature reduction within the constraints of the existing submarine power plant and the maintenance of neutral buoyancy. This innovative magnetohydrodynamic propulsion system offers an approach for submarine propulsion that can be an important contributio

关键词： Ship Propulsion

来源：评论

学校读者我要写书评

暂无评论

THE COMMAND SUPPORT AT-SEA EXPERIMENT

引用

NAVAL ENGINEERS JOURNAL 1990年第3期102卷 25-36页

作者： BUSCHER, DJ SUNDAY, DM David J. Buscher:is an electrical engineer on the Principal Professional Staff of the Fleet Systems Department of The Johns Hopkins University Applied Physics Laboratory. He earned his BS degree in electrical engineering from Villanova University in 1967 an MSEE degree from the University of Maryland in 1972 and an MS degree in technical management from The Johns Hopkins University in 1985. He was the lead engineer on the Command Support At-Sea Experiment Project. He started his career in 1967 with the U.S. Army Harry Diamond Laboratory working on computer and communications projects. During this time he worked in Vietnam with the United States Army Vietnam Science Advisor Office. Since joining JHU/APL in 1978 he has worked on a variety of projects associated with computer graphics hospital patient information systems computer networks autonomous underwater vehicles and satellite communications. He is currently assistant group supervisor of the Computer Systems Group. Daniel M. Sunday:is a mathematician on the Principal Professional Staff of the Fleet Systems Department of The Johns Hopkins University Applied Physics Laboratory. He earned his Ph.D. in mathematics from the University of Minnesota in 1971 and did postdoctoral research on neural networks at the University of California at Berkeley. Since joining JHU/APL in 1980 Dr. Sunday has worked as a designer and developer of software systems with emphasis on medical imaging interactive graphics natural language interfaces and software standards. He was the network designer for the Headquarters Integrated Office System (HIOS) Network for the Army at the Pentagon. He is currently the lead software engineer on the Command Support At-Sea Experiment Project.

The Command Support At-Sea Experiment (CS@SE) provides experimental advanced graphics display systems consisting of large screen color displays and operator console color displays in the combat information center (CIC) of an Aegis cruiser and in the tactical flag command center (TFCC) of an aircraft carrier. CS@SE systems are designed to prototype potential command support capabilities in an at-sea environment to validate and refine requirements for planned production system upgrades. These systems use sophisticated color graphics techniques to provide real-time tactical displays that improve the availability of information to an operator by reducing clutter through the use of color, area fill, transparen overlays and intensity coding of track symbols. Interfaces wen developed with the Aegis Display system (ADS), Shipboarc Gridlock system with Auto-correlation (SGS/AC), Flag Dats Display system (FDDS) and Tomahawk Engagement Planning and Exercise Evaluation system (TEPEE) that provided the data for the presentation of a tactical display. Display elements included both real-time and over-the-horizon (OTH) surface track data, velocity leaders, tags, uncertainty ellipses, and history trails. The display also included filled land masses, country boundaries, commercial airways, cities, graphics overlays (i.e., operational areas), weapon system missile performance contours, and engagement plans. This paper describes the experiment, its installation and integration into the shipboard environments of an Aegis cruiser (USS Leyte Gulf ) and an aircraft carrier (USS America , its usage by the ships companies and embarked staffs, and the experiment result! and findings. Key conclusions of the experiment are: 1 Advanced graphics color displays can significantly enhance the ability of the warfighter to assimilate a complex tactical display. 2 Both ships reported a requirement for a correlated OTH and real-time track display with the ability to clearly differentiate the two types

关键词： computer Graphics

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：