检索结果-内蒙古大学图书馆

2022 Chinese Automation Congress, CAC 2022

作者： Li, Yankai Ren, Biao Liu, Ding Xi'An University of Technology Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Xi'an710048 China

ISBN: (纸本)9781665465335

In this paper, the control issue of the semiconductor silicon monocrystalline growth process is studied through an event triggered model prediction approach. Firstly, a state-space model of silicon monocrystalline growth process is developed to describe the energy conversion and the dynamics and the geometry of the isodiametric stage silicon monocrystalline via the Czochralski method. Secondly, a small perturbation linearization is used to obtain a linear continuous model, which is translated into a linear discrete model under zero-order retainers. Finally, an event triggered model prediction controller is established to decrease the calculation of model prediction in the rolling optimization process. Based on experimental results, the event-triggered model prediction control algorithm is confirmed to be an effectively control scheme for the silicon monocrystalline growth process. © 2022 IEEE.

关键词： Model predictive control

来源：评论

学校读者我要写书评

暂无评论

Cluster Consensus Problem on Time-varying Higher-Order Interaction Networks

Cluster Consensus Problem on Time-varying Higher-Order Inter...

引用

IEEE Conference on Decision and control

作者： Haoyu Wei Lulu Pan Haibin Shao Dewei Li Wenbin Yu Department of Automation Shanghai Jiao Tong University and Key Laboratory of System Control and Information Processing Ministry of Education of China and Shanghai Engineering Research Center of Intelligent Control and Management Shanghai China

ISBN: (数字)9798350316339

ISBN: (纸本)9798350316346

This paper examines the cluster consensus problem of higher-order interaction networks on switching networks. The matrix-valued inter-agent coupling mechanism is employed to capture the higher-order interactions amongst neighboring agents. Specifically, for a higher-order interaction network with both positive definite and positive semi-definite coupling matrices, we examine the scenario in which the nullspace of positive semi-definite coupling matrices is constructed by a set of orthogonal basis vectors. From the perspective of the lower-order component graph -the projection of network structure onto the direction of each orthogonal basis–results on the explicit characterization of cluster consensus of higher-order interaction networks are provided. Moreover, for time-varying higher-order interaction networks, necessary and sufficient conditions are provided to ensure that a time-varying network shares the same steady-state values as the integral time-invariant network. Simulation results are provided to demonstrate the theory.

关键词： Couplings Sufficient conditions Network topology Simulation Switches Vectors Topology Steady-state Matrix decomposition Convergence

来源：评论

学校读者我要写书评

暂无评论

Efficient Reinforcement Learning for 3D LiDAR Navigation of Mobile Robot 41

Efficient Reinforcement Learning for 3D LiDAR Navigation of ...

引用

第41届中国控制会议

作者： Yu Zhai Zhe Liu Yanzi Miao Hesheng Wang China University of Mining and Technology MoE Key Lab of Artificial Intelligence Shanghai Jiao Tong University Department of Automation Key Laboratory of System Control and Information Processing of Ministry of EducationShanghai Engineering Research Center of Intelligent Control and ManagementShanghai Jiao Tong University

ISBN: (数字)9789887581536

ISBN: (纸本)9781665482561

Developing an efficient automatic navigation system for mobile robots is challenging in the strange scenarios where robots can only observe the environment of the surrounding limited *** other distributed automatic navigation systems exist,they often require extracting semantic information to calculate navigation action,which requires extra modules to provide perceptual information and is not *** propose an end-to-end automatic navigation system based on the reinforcement learning *** particular,the raw 3 D LiDAR data is used to directly map an efficient navigation *** design a novel dense reward function to handle the reward sparsity issue and provide a graphical representation method to enable the efficient feature learning from the raw 3 D LiDAR data in our navigation *** addition,an imitation learning based policy initialization is introduced before the subsequent reinforcement learning,which increases the learning efficiency and,in the meantime,still encouraging the robot to explore all the potential states to achieve advanced performance than the imitated *** navigation model is trained in the Webots environment and the experimental results show that our model has efficient and flexible navigation performance in complex *** importantly,trained model can be easily extended to unfamiliar environments.

关键词： End-to-end Navigation Mobile robot Reinforcement Learning 3D LiDAR

来源：评论

学校读者我要写书评

暂无评论

Simulation study on control characteristics of semiconductor grade monocrystalline silicon growth process

Simulation study on control characteristics of semiconductor...

引用

2022 Chinese Automation Congress, CAC 2022

作者： Liu, Yuyu Liu, Ding Song, Zezhong Local Joint Engineering Research Center of Crystal Growth Equipment and System Integration Shaanxi Key Laboratory of Complex System Control and Intelligent Information Processing Xi`an University of Technology Xi'an710048 China

ISBN: (纸本)9781665465335

The growth of Czochralski(CZ) monocrystalline silicon is a nonlinear dynamic time-varying system with complex physical changes and multi-field and multi-phase coupling. In order to meet the needs of information development, it is urgent to develop large-scale, high-quality monocrystalline silicon. However, it is extremely difficult to establish an accurate control system model. Therefore, this paper considers the complex physical changes of multi-field coupling and non-linear processes in the growth of CZ monocrystalline silicon, a lumped parameter model for the growth of monocrystalline silicon is established based on energy balance model, fluid mechanics model, and geometry model, according to the internal mechanism of the monocrystalline silicon growth and the transfer mechanism of internal material flow. According to the model, a CZ monocrystalline silicon growth simulation control system is established under the Matlab/Simulink environment, and the real-time simulation data of each state variable of crystal growth is obtained. So that the control characteristics of each state variable in the crystal growth process can be analyzed. Finally, the validity of the established model is checked by the records evaluation of the semiconductor industry production process. Finally, the validity of the established model is verified based on the data analysis of the semiconductor industry production process. The results show that the model has high accuracy and can better describe the dynamic behavior of the actual monocrystalline silicon growth system. © 2022 IEEE.

关键词： MATLAB

来源：评论

学校读者我要写书评

暂无评论

Energy-Based control Approaches for Weakly Coupled Electromechanical Systems

arXiv

引用

arXiv 2024年

作者： Javanmardi, Najmeh Borja, P. Yazdanpanah, M.J. Scherpen, J.M.A. Jan C. Willems Center for Systems and Control ENTEG Faculty of Science and Engineering University of Groningen Groningen Netherlands School of Engineering Computing and Mathematics University of Plymouth Plymouth United Kingdom Control and Intelligent Processing Center of Excellence School of Electrical and Computer Engineering University of Tehran Tehran Iran

This paper addresses the regulation and trajectory-tracking problems for two classes of weakly coupled electromechanical systems. To this end, we formulate an energy-based model for these systems within the port-Hamiltonian framework. Then, we employ Lyapunov theory and the notion of contractive systems to develop control approaches in the port-Hamiltonian framework. Remarkably, these control methods eliminate the need for solving partial differential equations or implementing any change of coordinates, and are endowed with a physical interpretation. We also investigate the effect of coupled damping on the transient performance and convergence rate of the closed-loop system. Finally, the applicability of the proposed approaches is illustrated in two applications of electromechanical systems via simulations. © 2024, CC BY.

关键词： Damping

来源：评论

学校读者我要写书评

暂无评论

A Probabilistic Topology Inference Method for Networked Dynamical System via Single Excitation

A Probabilistic Topology Inference Method for Networked Dyna...

引用

IEEE Conference on Decision and control

作者： Qing Jiao Yushan Li Jianping He Dept. of Automation Key Laboratory of System Control and Information Processing Ministry of Education of China and Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai China

ISBN: (数字)9798350316339

ISBN: (纸本)9798350316346

A growing number of works have investigated inferring the topology of networked dynamical systems from observations, such as to better understand the system behaviour. Despite the tremendous advances, most of them require the observations to be abundant. This paper focuses on inferring the topology by injecting single excitation on a node and collecting several steps of noisy observations. The problem is challenging because the noises cannot be depressed in several observations and are mixed with the injected excitation, making it hard to directly reveal the topology. To practice, we develop a probabilistic method based on the hypothesis test framework. First, we infer the neighbors that are within h-hop of the excited node and derive the accuracy guarantees. Then, we extend the method to infer the exact h-hop neighbors. A computable lower bound for the accuracy probability is established to provide confidence support in the inference procedures. Furthermore, we give the conditions of excitation input to ensure a desired inference probability, which provides guidance for the input design. Numerical simulations are conducted to verify the effectiveness of the proposed method.

关键词： Lower bound Accuracy Network topology Noise Probabilistic logic Numerical simulation Topology Noise measurement Reliability Dynamical systems

来源：评论

学校读者我要写书评

暂无评论

Dynamic Event-Triggered Consensus on Matrix-weighted Networks:Leadless Case

Dynamic Event-Triggered Consensus on Matrix-weighted Network...

引用

第42届中国控制会议

作者： Lintao Dou Haoyu Wei Jian Huang Lulu Pan Haibin Shao Dewei Li the College of Intelligent Science National University of Defense Technology the Department of Automation Shanghai Jiao Tong Universityand Key Laboratory of System Control and Information ProcessingMinistry of Education of Chinaand Shanghai Engineering Research Center of Intelligent Control and Management

This paper examines the event-triggered consensus of the multi-agent system on matrix-weighted networks,where the interdependencies among higher-dimensional states of neighboring agents are characterized by matrix-weighted edges in the ***,a novel distributed dynamic event-triggered coordination strategy is proposed for this category of generalized networks,in which an auxiliary system is employed for each agent to dynamically adjust the triggering threshold,which plays an essential role in guaranteeing that the triggering time sequence does not exhibit Zeno *** event-triggered control protocols are proposed to guarantee leaderless consensus for multi-agent systems on matrix-weighted networks,***,the spectrum of matrix-valued weights is crucial in event-triggered mechanism design for matrix-weighted networks,generalizing those results only applicable for scalar-weighted *** proposed approach allows each agent to broadcast and receive information only at its triggering ***,simulation examples are provided to demonstrate the theoretical results.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Edge-Assisted Flexible Platooning of Connected and Automated Vehicles Under Traffic Anomaly

引用

IEEE Transactions on Vehicular Technology 2025年

作者： Gao, Fengkun Yang, Bo Chen, Cailian Guan, Xinping Shanghai Jiao Tong University Department of Automation Shanghai200240 China Ministry of Education of China Key Laboratory of System Control and Information Processing Shanghai200240 China Shanghai Engineering Research Center of Industrial Intelligent Control and Management Shanghai200240 China

The platooning of connected and automated vehicles (CAVs) has the great potential to significantly improve travel experience in terms of safety, comfortableness, and energy efficiency. However, constrained by sensing range and prediction accuracy, the performance of CAV platoon can not be guaranteed in the scenario of mixed traffic consisting of CAVs and human-driven vehicles (HDVs). This is not only due to the uncertainty of HDVs but also related to the occurrence of various traffic anomalies, such as emergency braking and accidents. In this paper, we aim to investigate an efficient control strategy to guarantee the operation of the platoon in mixed traffic, especially in the case of traffic anomalies. To tackle the problem, an edge-assisted platoon control strategy, called E-CACC, is proposed. First, an error-aware flexible tracking policy is designed to adapt to HDV uncertainties and speed prediction errors. Based on the tracking policy, a zone model predictive control (ZMPC) method is then designed to guarantee travel safety and avoid undesired acceleration. Further, a coordination strategy of CAV platoon and roadside unit (RSU) is proposed to prevent the platoon from potential collision in the case of traffic anomalies, where an event-based communication trigger is designed to determine whether and when the platoon establishes communication links with RSU to acquire exogenous sensing data of anomaly segment. Finally, the evaluation results illustrate the effectiveness of the proposed method in improving travel safety and comfortableness. © 1967-2012 IEEE.

关键词： Braking performance

来源：评论

学校读者我要写书评

暂无评论

An Integrated intelligent Autonomous Driving Bulldozer System: Pose Estimation, Object Detection, and Work Planning for Dumping Operations

引用

Journal of Field Robotics 2025年第0期

作者： Peng, Gang Gao, Qiang Liu, Xingyu Zhou, Yicheng Duan, Hangqi Wu, ZhanGang Hu, Bin Zhu, Xukang Xu, Daosheng School of Artificial Intelligence and Automation Huazhong University of Science and Technology Wuhan China Key Laboratory of Image Processing and Intelligent Control Ministry of Education Wuhan China Engineering Research Center of Autonomous Intelligent Unmanned Systems Ministry of Education Wuhan China Shantui Construction Machinery Co. Ltd. Jining China

In recent years, the rapid advancement of automation control and intelligent sensing technologies has positioned autonomous driving as a focal point of interest for both academia and industry. As core equipment in modern construction and industrial production, engineering machinery urgently requires intelligent transformation. To promote the intelligent development of engineering machinery, we have designed an integrated intelligent autonomous driving bulldozer system, which can be extended to various types of engineering machinery. For the specific mine dumping operation environment, we propose a multisensor fusion pose estimation algorithm framework based on the Global Navigation Satellite System, inertial measurement unit, visual cameras, and light detection and ranging (LiDAR) to address issues arising from sensor failures under harsh construction conditions. Furthermore, to ensure safety during task execution, we design a three-dimensional object detection method based on the optimal observation plane from LiDAR data. By integrating pose estimation and environmental perception results, we develop a comprehensive work planning and path-tracking algorithm to maintain task efficiency. Experimental results demonstrate that our intelligent autonomous driving bulldozer system performs excellently under various working conditions. The accuracy of its pose estimation, object detection, and path tracking meets the requirements of actual construction environments, showcasing its significant potential in engineering applications. © 2025 Wiley Periodicals LLC.

关键词： Construction equipment

来源：评论

学校读者我要写书评

暂无评论

RGB Image-Based Hand Pose Estimation: A Survey on Deep Learning Perspective

RGB Image-Based Hand Pose Estimation: A Survey on Deep Learn...

引用

International Symposium on Artificial Intelligence and Signal processing (AISP)

作者： Seyed Amirhossein Farjadi M.-R. Akbarzadeh-T Kamaledin Ghiasi-Shirazi Department of Computer Engineering Center of Excellence on Soft Computing and Intelligent Information Processing Ferdowsi University of Mashhad Mashhad Iran Department of Computer Engineering Ferdowsi University of Mashhad Mashhad Iran

The pervasive integration of modern artificial intelligence into daily life necessitates robust human-computer interaction, underscored by advancements in computer technology. As the primary human tool, hand position, and orientation are vital for applications like virtual reality, with hand pose estimation playing a pivotal role. Despite the challenges inherent in RGB image-based estimation, the coalescence of extensive datasets, neural networks, and heightened computational capabilities has catalyzed the utilization of deep learning in visual tasks, particularly advancing hand pose estimation. This review exclusively centers on methodologies of RGB image-based approaches within the realm of hand pose estimation. The paper explores recent advancements in this category, providing a comprehensive analysis of outcomes and charting future directions. Organized around discussions on challenges, advancements, and future directions, this review aims to contribute to the ongoing discourse in the dynamic RGB image-based hand pose estimation field. By addressing unique challenges specific to this method, the paper offers insights that contribute to developing precise and robust hand pose estimation systems, impacting the broader landscape of computer vision and human-machine interaction.

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：