检索结果-内蒙古大学图书馆

2021 China Automation Congress, CAC 2021

作者： Gao, Ying Xie, Weinan Li, Qinghua Li, Xinnian Hu, Meiling Zhao, Liu Space Control and Inertial Technology Research Center Harbin Institute of Technology Harbin150001 China Research Institute of Intelligent Control Systems Harbin Institute of Technology Harbin150001 China Department of Control Science and Engineering Harbin Institute of Technology Harbin150001 China

ISBN: (纸本)9781665426473

Industrial robots need to execute specific trajectories on production lines, which requires rational planning of robot joint trajectories in Cartesian space. To improve the efficiency and control accuracy of industrial robots, time-jerk multi-objective trajectory optimization is required. The main research of this topic is to apply the particle swarm optimization(PSO) algorithm based on crossover and subgroup to complete the trajectory optimization of a six-degree-of-freedom robot in Cartesian space with time-jerk multi-objective function and compare the optimization effect of the hybrid particle swarm optimization algorithm relative to the traditional particle swarm optimization algorithm. Firstly, a seven segment S-Spline interpolation function is applied to complete the trajectory planning and the basic PSO algorithm is applied to optimize the trajectory for the interpolation time. Then based on the shortcomings of the basic PSO algorithm, the particle swarm optimization algorithm based on crossover and subgroup is proposed to improve the speed and effectiveness of the trajectory optimization algorithm. Finally, simulation experiments show that the total time and joint shocks of robot trajectory planning are greatly reduced,which verifies the effectiveness of the hybrid PSO algorithm applied to robot time-shock optimal trajectory optimization. © 2021 IEEE

关键词： Industrial robots

来源：评论

学校读者我要写书评

暂无评论

Slewing control of Overhead Crane Based on State-enhance Coupling Method

Slewing Control of Overhead Crane Based on State-enhance Cou...

引用

第43届中国控制会议

作者： Rui Liu Biao Lu Jinyang Dong Weili Ding The 6th Research Institute of China Electronic Corporation Institute of Intelligence Technology and Robotic Systems Shenzhen Research Institute of Nankai University Engineering Research Center of Intelligent Control System and Intelligent Equipment Ministry of Education Yanshan University National Key Laboratory of Key Technologies for Lifting Machinery Yanshan University

ISBN: (数字)9789887581581

ISBN: (纸本)9798350366907

Cranes which are frequently utilized as sizable machinery, are widely used across a range of settings, including warehouses, distribution hubs, harbors, steel plants, and manufacturing facilities. However, the current researches on cranes have paid insufficient attention to the rotation of loads during transportation. Additionally, some of the proposed control methods fail to effectively integrate information from both actuated DOFs(degrees of freedom) and unactuated DOFs, leading to a loss of controller robustness. In this paper, we establish an overhead crane model with a slewing mechanism, focusing on the analysis of crane's lifting and rotating motion. Based on that, a nonlinear controller is proposed for load slewing control. The stability of the controller is proven using Lyapunov techniques and LaSalle's invariance theorem. The effectiveness and robustness of the controller are validated through numerical simulations.

关键词： Load Rotation Nonlinear controller Robustness

来源：评论

学校读者我要写书评

暂无评论

Synthesis of Decoherence-Free Modes in Linear Quantum Passive systems via Robust Pole Placement

Synthesis of Decoherence-Free Modes in Linear Quantum Passiv...

引用

IEEE International Conference on systems, Man and Cybernetics

作者： Zibo Miao Yu Pan Qing Gao Guangdong Key Laboratory of Intelligent Morphing Mechanisms School of Mechanical Engineering and Automation Adaptive Robotics Harbin Institute of Technology Shenzhen China State Key Laboratory of Industrial Control Technology The Institute of Cyber-Systems and Control College of Control Science and Engineering Zhejiang University Hangzhou China The School of Automation Science and Electrical Engineering Beijing Advanced Innovation Center for Big Data and Brain Computing Beihang University Beijing China

ISBN: (数字)9781665410205

ISBN: (纸本)9781665410212

In this paper we extend our previous research on coherent observer-based pole placement approach to study the synthesis of robust decoherence-free (DF) modes for linear quantum passive systems, which is aimed at preservation of quantum information. In particular, DF modes can be generated by placing the poles on the imaginary axis via a coherent feedback design scheme, and these modes can further be simultaneously made robust against perturbations to the system parameters by minimizing the condition number associated with imaginary poles. We develop explicit algebraic conditions for the existence of such a coherent quantum controller, with the corresponding deign procedure provided. Examples are given to illustrate the process of tuning the DF modes towards perfect robustness via the proposed pole placement technique.

关键词： Perturbation methods Design methodology Quantum optics Robustness Feedback control Closed loop systems Tuning Cybernetics

来源：评论

学校读者我要写书评

暂无评论

Robust control of Feeding Speed in Coal Seam Drilling Process Considering Borehole Friction

Robust Control of Feeding Speed in Coal Seam Drilling Proces...

引用

Chinese Automation Congress (CAC)

作者： Xiao Liu Luefeng Chen Chengda Lu Haipeng Fan Min Wu Witold Pedrycz School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems School of Automation China University of Geosciences Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton AB Canada Systems Research Institute Polish Academy of Sciences Warsaw Poland Department of Computer Engineering Istinye University Istanbul Turkey

ISBN: (数字)9798350368604

ISBN: (纸本)9798350368611

During the coal seam drilling process, the drill string is subject to compressive deformation, compounded by unpredictable variations in formation hardness and borehole wall friction, leading to challenges in maintaining a stable feeding speed. This paper presents a novel approach by introducing uncertain parameters to describe the effects of formation hardness and borehole wall friction. Drill string axial movement model is modeled as a polyhedral system based on a lumped parameter representation. To meet industrial performance requirements, we design a robust $H_{\infty}$ controller to achieve consistent feeding speed control. Our simulation results demonstrate the controller's effectiveness in ensuring system stability despite fluctuations in formation hardness and drill string friction.

关键词： Drilling Robust control Friction Simulation Geology Velocity control Stability criteria Process control Coal Output feedback

来源：评论

学校读者我要写书评

暂无评论

Double deep Q-learning for anti-saturation attack problem of warship group 1

Double deep Q-learning for anti-saturation attack problem of...

引用

1st IEEE International Conference on Digital Twins and Parallel Intelligence, DTPI 2021

作者： Li, Wei Xiong, Gang Tao, Hao Han, Yunjun Wang, Fang Dong, Xisong Shen, Zhen Institute of Automation Chinese Academy of Sciences State Key Laboratory for Management and Control of Complex Systems China Beijing Engineering Research Center of Intelligent Systems and Technology Institute of Automation China Guangdong Engineering Research Center of 3D Printing and Intelligent Manufacturing Cloud Computing Center Chinese Academy of Sciences China China Ship Development and Design Center Wuhan430064 China Shandong University Jinan China

ISBN: (纸本)9781665433372

Anti-saturation attack (ASA) strategy is vital for the survival of a warship group, and attracts the focus of many researchers. In this paper, the dynamics of ASA is formulated as a Markov Decision Process (MDP) with an enhanced states space since those characters are involved, such as the formation and detection and interception areas of warship group. A reinforcement learning method (Double Deep Q-leaning, DDQN) is developed to solve the problem and deal with the curse of dimensionality whereby the cost-to-go value is calculated by a marine engagement simulation system. A heuristic defense algorithm guided by field expert knowledge is designed for comparison. The experimental results show that the DDQN method performs better in anti-saturation attack scenarios. © 2021 IEEE.

关键词： Reinforcement learning

来源：评论

学校读者我要写书评

暂无评论

Q-learning-based feedback linearization method for unknown dynamics

Q-learning-based feedback linearization method for unknown d...

引用

2023 IEEE International Conference on Mechatronics (ICM)

作者： Yipu Sun Xin Chen Wenpeng He Luo Wang Edwardo F. Fukushima Jinhua She School of Automation China University of Geosciences Wuhan China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan China Engineering Research Center of intelligent Technology Geo-Exploration. Ministry of Education Wuhan China School of Engineering Tokyo University of Technology Tokyo Japan

This paper present a feedback linearization technique for affine nonlinear systems that is independent of system dynamics. First, a input-output feedback linearization correction framework is described, and a interference estimator is employed to guarantee the stability of plant during the learning process. Then, a model-free Q-learning algorithm is presented to solve the feedback linearized controller. Finally, the position control of a single-link flexible joint manipulator system is used as an example to demonstrate the effectiveness of the method.

关键词： Linear systems Q-learning Mechatronics System dynamics Simulation Neural networks Position control

来源：评论

学校读者我要写书评

暂无评论

NeRF in Robotics: A Survey

arXiv

引用

arXiv 2024年

作者： Wang, Guangming Pan, Lei Peng, Songyou Liu, Shaohui Xu, Chenfeng Miao, Yanzi Zhan, Wei Tomizuka, Masayoshi Pollefeys, Marc Wang, Hesheng The University of Cambridge ETH Zurich Switzerland The Department of Automation Shanghai Jiao Tong University Shanghai200240 China The Key Laboratory of System Control and Information Processing Ministry of Education of China China Engineering Research Center of Intelligent Control for Underground Space Ministry of Education School of Information and Control Engineering Advanced Robotics Research Center China University of Mining and Technology Xuzhou221116 China ETH Zurich Zurich Switzerland Mechanical Systems Control Laboratory University of California Berkeley United States

Meticulous 3D environment representations have been a longstanding goal in computer vision and robotics fields. The recent emergence of neural implicit representations has introduced radical innovation to this field as implicit representations enable numerous capabilities. Among these, the Neural Radiance Field (NeRF) has sparked a trend because of the huge representational advantages, such as simplified mathematical models, compact environment storage, and continuous scene representations. Apart from computer vision, NeRF has also shown tremendous potential in the field of robotics. Thus, we create this survey to provide a comprehensive understanding of NeRF in the field of robotics. By exploring the advantages and limitations of NeRF, as well as its current applications and future potential, we hope to shed light on this promising area of research. Our survey is divided into two main sections: The Application of NeRF in Robotics and The Advance of NeRF in Robotics, from the perspective of how NeRF enters the field of robotics. In the first section, we introduce and analyze some works that have been or could be used in the field of robotics from the perception and interaction perspectives. In the second section, we show some works related to improving NeRF's own properties, which are essential for deploying NeRF in the field of robotics. In the discussion section of the review, we summarize the existing challenges and provide some valuable future research directions for reference. © 2024, CC BY-NC-ND.

关键词： Robotics

来源：评论

学校读者我要写书评

暂无评论

Distributed Constrained Online Nonconvex Optimization with Compressed Communication

arXiv

引用

arXiv 2025年

作者： Zhang, Kunpeng Xu, Lei Yi, Xinlei Cao, Ming Johansson, Karl H. Chai, Tianyou Yang, Tao State Key Laboratory of Synthetical Automation for Process Industries Northeastern University Shenyang110819 China Department of Mechanical Engineering University of Victoria VictoriaBCV8W 2Y2 Canada Shanghai Institute of Intelligent Science and Technology National Key Laboratory of Autonomous Intelligent Unmanned Systems Frontiers Science Center for Intelligent Autonomous Systems Ministry of Education Shanghai201210 China Engineering and Technology Institute Groningen Faculty of Science and Engineering University of Groningen GroningenAG 9747 Netherlands Division of Decision and Control Systems School of Electrical Engineering and Computer Science KTH Royal Institute of Technology Sweden Digital Futures Stockholm10044 Sweden

This paper considers distributed online nonconvex optimization with time-varying inequality constraints over a network of agents. For a time-varying graph, we propose a distributed online primal–dual algorithm with compressed communication to efficiently utilize communication resources. We show that the proposed algorithm establishes an O(T max{1−θ1,θ1}) network regret bound and an O(T 1−θ1/2) network cumulative constraint violation bound, where T is the number of iterations and θ1 ∈ (0, 1) is a user-defined trade-off parameter. When Slater’s condition holds (i.e, there is a point that strictly satisfies the inequality constraints at all iterations), the network cumulative constraint violation bound is reduced to O(T 1−θ1). These bounds are comparable to the state-of-the-art results established by existing distributed online algorithms with perfect communication for distributed online convex optimization with (time-varying) inequality constraints. Finally, a simulation example is presented to validate the theoretical results. Copyright © 2025, The Authors. All rights reserved.

关键词： Convex optimization

来源：评论

学校读者我要写书评

暂无评论

Fault Localization and State Estimation of Power Grid under Parallel Cyber-Physical Attacks

arXiv

引用

arXiv 2025年

作者： Ren, Junhao Zhao, Kai Zhang, Guangxiao Liu, Xinghua Zhai, Chao Xiao, Gaoxi School of Electrical and Electronic Engineering Nanyang Technological University Singapore639798 Singapore Institute of Catastrophe Risk Management Nanyang Technological University Singapore639798 Singapore Future Resilient Systems Singapore-ETH Centre Singapore138602 Singapore School of Electrical Engineering Xi’an University of Technology Xi’an710048 China Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems The Engineering Research Center of Intelligent Technology for Geo-Exploration Ministry of Education Wuhan430074 China

Parallel cyber-physical attacks (PCPA) refer to those attacks on power grids by disturbing/cutting off physical transmission lines and meanwhile blocking transmission of measurement data to dwarf or delay the system protection and recovery actions. Such fierce hostile attacks impose critical threats to the modern power grids when there is a fusion of power grids and telecommunication technologies. In this paper, we investigate the fault diagnosis problem of faulty transmission lines under a broader spectrum of PCPA for a linearized (or DC) power flow model. The physical attack mechanism of PCPA includes not only disconnection but also admittance value modification on transmission lines, for example, by invading distributed flexible AC transmission system (D-FACTS). To tackle the problem, we first recover the information of voltage phase angles within the attacked area. Using the information of voltage phase angle and power injection of buses, a graph attention network-based fault localization (GAT-FL) algorithm is proposed to find the locations of the physical attacks. By capitalizing on the feature extraction capability of the GAT on graph data, the fault localization algorithm outperforms the existing results when under cyber attacks, e.g., denial of service (DoS) attacks. A line state identification algorithm is then developed to identify the states of the transmission lines within the attacked area. Specifically, the algorithm restores the power injection of buses within the attacked area and then identities the state of all the transmission lines within the attacked area by solving a linear programming (LP) problem. Experimental simulations are conducted on IEEE 30/118 bus standard test cases to demonstrate the effectiveness of the proposed fault diagnosis algorithms. Copyright © 2025, The Authors. All rights reserved.

关键词： Cyber attacks

来源：评论

学校读者我要写书评

暂无评论

Robust control of Feeding Speed for Coal Mine Tunnel Drilling Machines

Robust Control of Feeding Speed for Coal Mine Tunnel Drillin...

引用

IEEE International Conference on Industrial Technology (ICIT)

作者： Xiao Liu Luefeng Chen Min Wu Weihua Cao Chengda Lu Witold Pedrycz School of Automation China University of Geosciences Wuhan China School of Automation the Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems and the Engineering Research Center of Intelligent Technology for Geo-Exploration Wuhan China Department of Electrical and Computer Engineering University of Alberta Edmonton Canada Department of Electrical and Computer Engineering University of Alberta Edmonton AB Canada Systems Research Institute Polish Academy of Sciences Warsaw Poland Department of Computer Engineering Istinye University Sariyer/Istanbul Turkey

ISBN: (数字)9798350340266

ISBN: (纸本)9798350340273

Changes in coal seam hardness cause fluctuations in the feed resistance at the drill bit during the drilling process, leading to unstable feeding speed. This paper proposes a robust dynamic output feedback controller to suppress disturbances caused by the variations in coal seam hardness in the feed system. Firstly, an unknown parameter measuring coal seam hardness is introduced, and an uncertain model of the feeding system is established based on the finite element model of the drill string. By designing weighted functions based on industrial field requirements and constructing a generalized plant, the controller achieves loop shaping, reducing the low-frequency impact of coal seam hardness variations on the feed system and suppressing the systems resonance peak. Simulation results demonstrate that the controller effectively suppresses parameter variations and external disturbances caused by changes in coal seam hardness, achieving stable control of the drilling speed.

关键词： Drilling Robust control Uncertainty Robust stability Simulation Coal Resonance

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：