检索结果-内蒙古大学图书馆

Comparative Analysis of Different Sliding Mode Control Approaches for Load Frequency Control in Edge of the Grid System

引用

IET Generation, Transmission and Distribution 2025年第1期19卷

作者： Aich, Pritom Ahmed, Anis Shah, Rakibuzzaman Islam, Md Rabiul Roy, Naruttam Kumar Nasir, Ali Department of Electrical and Electronic Engineering Daffodil International University Dhaka Bangladesh Department of Electrical and Electronic Engineering Khulna University of Engineering & Technology Khulna Bangladesh Federation University Australia Mt HelenVIC Australia School of Electrical Computer and Telecommunications Engineering University of Wollongong WollongongNSW Australia Control and Instrumentation Engineering Department King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia Interdisciplinary Research Center for Intelligent Manufacturing and Robotics King Fahd University of Petroleum and Minerals Dhahran Saudi Arabia

The integration of renewable energy sources (RESs) at the edge of the grid plays a contributory role in advancing the transition to a sustainable energy future. However, this transition introduces significant variability, which challenges the maintenance of frequency stability in power systems. To address the impacts of RES variability, various robust control strategies have been developed. This paper compares the performance of different advanced sliding mode control (SMC) approaches, i.e., super twisting (ST) algorithm-based second order sliding mode control (STSOSMC), second order sliding mode control (SOSMC), double integral sliding mode control (DISMC) and integral sliding mode control (ISMC) with conventional sliding mode control (SMC) for load frequency control with stochastic RESs such as biogas generators (BG) and wind-based doubly fed induction generators (DFIG). The impact of the advanced sliding mode controllers on the voltage and rotor angle stability of the system is also explored. The efficacy of the controllers is tested under different load disturbances, considering nonlinearities such as communication delay (CD), sensor inaccuracy (SI), governor dead band (GDB), and generation rate constraint (GRC). The results demonstrate that STSOSMC achieves superior frequency regulation with minimal chattering and outperforms other controllers in terms of settling time, overshooting, and undershooting in frequency deviation. The result also demonstrates the effectiveness of STSOSMC in managing the variability and disturbances of RESs. Therefore, it could be considered the most robust control mechanism from the edge of the grid system with high penetration of RESs. © 2025 The Author(s). IET Generation, Transmission & Distribution published by John Wiley & Sons Ltd on behalf of The Institution of engineering and Technology.

关键词： Robust control

来源：评论

学校读者我要写书评

暂无评论

Acoustic Beamforming via Interference-Plus-Noise Covariance Matrix Construction for Interferences and Noise Attenuation

Acoustic Beamforming via Interference-Plus-Noise Covariance ...

引用

IEEE International Conference on robotics and Biomimetics

作者： Yongxiong Xiao Shiqiang Zhu Wei Song Minhong Wan Jason Gu Te Li Research Center for Intelligent Robotics Research Institute of Interdisciplinary Innovation Zhejiang Lab Hangzhou China Zhejiang Engineering Research Center for Intelligent Robotics Hangzhou China Department of Electrical and Computer Engineering Dalhousie University Halifax NS Canada

ISBN: (纸本)9781665481106

The interference-plus-noise covariance matrix (INCM) is essential in improving an acoustic beamformer's interference and noise attenuation performance. In practical implementation, INCM reconstruction is required to remove the signal of interest (SOI) components from the sample covariance matrix. However, some of the interference and noise components are inevitably removed during the INCM reconstruction process to avoid distortion of the desired speech, which deteriorates the interference and noise attenuation performance of the beamformer. This paper proposes constructing an INCM with as much information on the interferences and noise as possible by adding covariance matrices of the spherically diffuse noise, background noise, and interferences. The final INCM is reconstructed by using the principal eigenvector and definition of INCM. The beamformer's weight coefficients are computed by the linearly constrained minimum variance (LCMV) formulation. The proposed method is validated by experiments using a circular microphone array mounted on a tour robot in an exhibition hall. The results show that the proposed beamformer improves the robustness of automatic speech recognition and the performance of robot audition.

关键词： Acoustic distortion Transfer functions Interference Attenuation Acoustics Robustness Covariance matrices

来源：评论

学校读者我要写书评

暂无评论

HSMR: A Head-Shoulder Mask Aided ResNet to Guide Focus of Re-Identification Implemented on Tour-Guide Robot

HSMR: A Head-Shoulder Mask Aided ResNet to Guide Focus of Re...

引用

IEEE International Conference on robotics and Biomimetics

作者： Zheyuan Lin Min Huang Wen Wang Mengjie Qin Te Li Minhong Wan Jason Gu Shiqiang Zhu Research Center for Intelligent Robotics Research Institute of Interdisciplinary Innovation Zhejiang Laboratory Hangzhou China Zhejiang Engineering Research Center for Intelligent Robotics Hangzhou China Department of Electrical and Computer Engineering Dalhousie University Halifax NS Canada

ISBN: (纸本)9781665481106

For service robots, person re-identification (ReID) and multi-pedestrian tracking (MPT) are vital to get a person's location and link identities across frames. Though their accuracy keeps improving, most work lacks consideration of the application scenario, haunted by limited space, constrained power supply, and demands of the real-time response during human-robot interaction. Some ReID models learn trivial or unrelated features, inhibiting the downstream tasks. To solve these issues, the efficient and light-weighted Head-Shoulder Mask aided ResNet (HSMR) is proposed. This model applies multi-task learning to enhance the feature extraction performance in the training stage without extra computational load during inference. The auxiliary task fully uses head-shoulder information to guide the network and focuses on the head region, which contains the identity information. In experiments on the Tour-Guide Robot Data Base (TGRDB), HSMR earned results better than ResNet-18 on the ReID task and was superior to the recent two-stream method on the MPT task. On the mobile hardware, inference reaches an average of 15.2 FPS, three times faster than the two-stream method. The code is released at https://***/ZhYLin99/HSMR.

关键词： Training Service robots Computational modeling Robot vision systems Human-robot interaction Multitasking Real-time systems

来源：评论

学校读者我要写书评

暂无评论

Aerodynamic Simulation of a Typical Multirotor e VTOL Aircraft Configuration *

Aerodynamic Simulation of a Typical Multirotor e VTOL Aircra...

引用

IEEE International Conference on robotics and Biomimetics

作者： Menglong Ding Yanyan Zhang Shiqiang Zhu Wei Song Pengyu Zhao Xufei Yan Jiandong Cai Jason Gu Anhuan Xie Research Center for Intelligent Robotics Research Institute of Interdisciplinary Innovation Zhejiang Lab Hangzhou China Zhejiang Engineering Research Center for Intelligent Robotics Hangzhou China Department of Electrical and Computer Engineering Dalhousie University Halifax NS Canada

ISBN: (纸本)9781665481106

The aerodynamic interaction among rotors is a key phenomenon that influences the performance of the electric Vertical Takeoff and Landing (eVTOL) aircraft. This study applied Lattice-Boltzmann Method (LBM) to systematically investigate the aerodynamic interaction under typical flight conditions. Simulation of a single rotor was performed to validate the reliability of LBM on rotor aerodynamics and find the maximum acceptable grid size. A numerical study on the complex unsteady flowfield caused by the sixteen rotors was also performed when considering the eVTOL is in hovering, forward flight and hovering under sidewind. Moreover, the analysis of the flowfield provides a detailed insight into the flow physics involved in such regular flight conditions.

关键词： Visualization Atmospheric modeling Rotors Aerodynamics Numerical models Reliability Aircraft

来源：评论

学校读者我要写书评

暂无评论

Binding in hippocampal-entorhinal circuits enables compositionality in cognitive maps 38

Binding in hippocampal-entorhinal circuits enables compositi...

引用

38th Conference on Neural Information Processing systems, NeurIPS 2024

作者： Kymn, Christopher J. Mazelet, Sonia Thomas, Anthony Kleyko, Denis Frady, E. Paxon Sommer, Friedrich T. Olshausen, Bruno A. Redwood Center for Theoretical Neuroscience Helen Wills Neuroscience Institute UC Berkeley Berkeley United States Université Paris-Saclay ENS Paris-Saclay Gif-sur-Yvette France Department of Electrical and Computer Engineering UC Davis Davis United States Centre for Applied Autonomous Sensor Systems Örebro University Örebro Sweden Intelligent Systems Lab Research Institutes of Sweden Kista Sweden Intel Labs Santa Clara United States Herbert Wertheim School of Optometry & Vision Science UC Berkeley Berkeley United States

We propose a normative model for spatial representation in the hippocampal formation that combines optimality principles, such as maximizing coding range and spatial information per neuron, with an algebraic framework for computing in distributed representation. Spatial position is encoded in a residue number system, with individual residues represented by high-dimensional, complex-valued vectors. These are composed into a single vector representing position by a similarity-preserving, conjunctive vector-binding operation. Self-consistency between the representations of the overall position and of the individual residues is enforced by a modular attractor network whose modules correspond to the grid cell modules in entorhinal cortex. The vector binding operation can also associate different contexts to spatial representations, yielding a model for entorhinal cortex and hippocampus. We show that the model achieves normative desiderata including superlinear scaling of patterns with dimension, robust error correction, and hexagonal, carry-free encoding of spatial position. These properties in turn enable robust path integration and association with sensory inputs. More generally, the model formalizes how compositional computations could occur in the hippocampal formation and leads to testable experimental predictions. © 2024 Neural information processing systems foundation. All rights reserved.

关键词：

来源：评论

学校读者我要写书评

暂无评论

A Target-based Calibration Method for LiDAR-Visual-Thermal Multi-Sensor System

A Target-based Calibration Method for LiDAR-Visual-Thermal M...

引用

IEEE International Conference on robotics and Biomimetics

作者： Songyu Yuan Tian Xie Shiqiang Zhu Yeheng Chen Yuehua Li Tao Zheng Jason Gu Zhejiang Lab Research Center for Intelligent Robotics Research Institute of Interdis-ciplinary Innovation Hangzhou China Zhejiang Engineering Research Center for Intelligent Robotics Hangzhou China Department of Electrical and Computer Engineering Dalhousie University Halifax NS Canada

ISBN: (纸本)9781665481106

As the basis of multi-sensor fusion, accurate extrinsic calibration among multi-sensors is vital for hetero-geneous information fusion. However, most existing methods only focus on the calibration between two specific heteroge-neous sensors, such as camera-LiDAR, LiDAR-thermal, and etc. which may cause inevitable accumulation when applied to a multi-sensor system. To address this problem, a novel calibration target and a high-accuracy method are proposed to simultaneously calibrate the intrinsic and extrinsic of a 3D LiDAR, a thermal camera and a visible camera without any user intervention. The proposed method only relies on one calibration board, to calibrate all the intrinsic and extrinsic parameters in one-step, without any strict pose requirement or long-time optimization. Furthermore, 2D-3D corresponding features can be extracted with higher precision by considering sensor model, comparing to the common feature extraction methods. Experiments with Velodyne VLP-16 LiDAR, ZED camera and D843NT thermal camera demonstrate that the proposed method can complete calibration among three of them automatically. Finally, this paper also presents a target-based method of uniformly expressing the calibration errors among multi-sensor system, with a competitive performance against most state-of-the-art methods.

关键词： Laser radar Three-dimensional displays Sensor phenomena and characterization Cameras Feature extraction Sensor systems Robustness

来源：评论

学校读者我要写书评

暂无评论

Adaptive Robust Invariant Extended Kalman filtering for Biped Robot

Adaptive Robust Invariant Extended Kalman filtering for Bipe...

引用

2022 IEEE International Conference on robotics and Biomimetics, ROBIO 2022

作者： Gao, Chengzhi Xie, Ye Zhu, Shiqiang Huang, Guanyu Kong, Lingyu Xie, Anhuan Gu, Jason Zhang, Dan Shao, Jun Qian, Haofu Research Center for Intelligent Robotics Research Institute of Interdisciplinary Innovation Zhejiang Laboratory Hangzhou311100 China Zhejiang Engineering Research Center for Intelligent Robotics Hangzhou311100 China Zhejiang University Zhejiang Hangzhou311100 China Department of Electrical and Computer Engineering Dalhousie University HalifaxNSB3H 4R2 Canada York University North YorkM3J 1P3 Canada School of Mechanical Engineering Zhejiang University Hangzhou310007 China

ISBN: (纸本)9781665481090

The precise estimation of system states is essential for the locomotion control of biped robots to maintain balance. Currently, the estimation of system states is either based on vision data that is susceptible to the environment, or fusing data from Inertial Measurement Unit (IMU) and the kinematic calculation. Invariant Extended Kalman Filtering (IEKF) is one of the most successful fusing algorithms to estimate system state. Generally, in IEKF, the noise covariance of system state is assumed to be known. However, the noise covariance of contact point for biped is not available since the ground-contact situation normally varies and not previously known. This paper presents a new fusing algorithm-Adaptive Robust Invariant Extended Kalman Filtering (ARIEKF) to adaptively adjust the noise parameter of contact point. The proposed algorithm applied the principle of robust estimation to resist outlier effects of state, and introduced an adaptive factor for the noise covariance of state to control its outlying disturbance influences. This paper firstly completed the full state estimation of biped robot using the theory of Lie groups and invariant observer. Then, the adaptive scale factor evaluated by three-segment approach was adopted to adjust the noise covariance of contact point. Finally, both IEKF and proposed ARIEKF are applied to our biped robot-Cosmos and the accuracy of two algorithms are compared. The mean square errors of the velocity of two algorithms were evaluated using the measurements from motion capture system. Experiments demonstrated that the mean square errors of the velocity are decreased 50 percent when compared with IEKF. © 2022 IEEE.

关键词： Mean square error

来源：评论

学校读者我要写书评

暂无评论

Graph-Based Visual-Kinematic Fusion and Monte Carlo Initialization for Fast-Deployable Cable-Driven Robots

Graph-Based Visual-Kinematic Fusion and Monte Carlo Initiali...

引用

IEEE/RSJ International Conference on intelligent Robots and systems (IROS)

作者： R. Khorrambakht H. Damirchi M.R. Dindarloo A. Saki S.A. Khalilpour Hamid D. Taghirad Stephan Weiss Electrical & Computer Engineering Department Control/Robotics Research Laboratory Tandon School of Engineering New York University Brooklyn NY School of Computer Science University of Adelaide Australia Faculty of Electrical Engineering University of Technology Tehran Iran Department of Smart Systems Technologies University of Klagenfurt Austria

Ease of calibration and high-accuracy task-space state-estimation purely based on onboard sensors is a key requirement for enabling easily deployable cable robots in real-world applications. In this work, we incorporate the onboard camera and kinematic sensors to drive a statistical fusion framework that presents a unified localization and calibration system which requires no initial values for the kinematic parameters. This is achieved by formulating a Monte-Carlo algorithm that initializes a factor-graph representation of the calibration and localization problem. With this, we are able to jointly identify both the kinematic parameters and the visual odometry scale alongside their corresponding uncertainties. We demonstrate the practical applicability of the framework using our state-estimation dataset recorded with the ARAS-CAM suspended cable driven parallel robot, and published as part of this manuscript.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Effect of Enhanced Neurofeedback Stimulus Content on Frontal Alpha Asymmetry 5

Effect of Enhanced Neurofeedback Stimulus Content on Frontal...

引用

5th IEEE International Symposium in robotics and Manufacturing Automation, ROMA 2022

作者： Ali, Syed Saad Azhar Hafeez, Yasir Ariffin, Tajol Ashraf Bin Tajol Adil, Syed Hasan Amin, Hafeez Ullah Boon, Tang Tong Universiti Teknologi Petronas Centre for Intelligent Signal and Imaging Research Electrical and Electronics Engineering Department Perak Seri Iskandar32610 Malaysia University of Nottingham Malaysia School of Computer Science Faculty of Science and Engineering Semenyih43500 Malaysia Universiti Teknologi Petronas Electrical and Electronics Engineering Department Perak Seri Iskandar32610 Malaysia Iqra University Software Engineering Department Karachi Pakistan

ISBN: (数字)9781665459327

ISBN: (纸本)9781665459327

Neurofeedback training has various therapeutic effects to mitigate the mental illness such as stress, anxiety, and depression. Neurofeedback is a non-invasive self-training of brain with the help of auditory or visual input stimulus. The enhancement to neurofeedback stimulus content can help to improve the efficacy of neurofeedback training. Therefore, in this study, the game stimulus content is enhanced to find the effect of enhanced parameters towards the efficacy of neurofeedback. The enhanced parameters include the changing of background, colour contrast, and background music. The neurofeedback training sessions are performed to mitigate the stress among university students. The electroencephalogram (EEG) data is recorded and feedback from the participants are also taken. The graphical and statistical analysis of the results of the neurofeedback training using alpha asymmetry show the effectiveness of neurofeedback towards mitigation of stress. © 2022 IEEE.

关键词： Diseases

来源：评论

学校读者我要写书评

暂无评论

AR/VR Digital Twin for Simulation and Data Collection of Robotic Environments

AR/VR Digital Twin for Simulation and Data Collection of Rob...

引用

IEEE International Conference on Autonomous Robot systems and Competitions (ICARSC)

作者： João G. Martins Karle Nutonen Paulo Costa Vladimir Kuts Tauno Otto Armando Sousa Marcelo R. Petry CRIIS - Centre for Robotics in Industry and Intelligent Systems INESC TEC - Institute for Systems and Computer Engineering Technology and Science Porto Portugal Faculty of Engineering University of Porto (FEUP) Porto Portugal ViruTech - Virumaa innovation center of digitalization and green technologies Taltech Virumaa College Kohtla-Jarve Estonia Department of Mechanical and Indusrial Taltech Tallinn Estonia

ISBN: (数字)9798331538606

ISBN: (纸本)9798331538613

Digital twins enable real-time modeling, simulation, and monitoring of complex systems, driving advancements in automation, robotics, and industrial applications. This study presents a large-scale digital twin-testing facility for evaluating mobile robots and pilot robotic systems in a research laboratory environment. The platform integrates high-fidelity physical and environmental models, providing a controlled yet dynamic setting for analyzing robotic behavior. A key feature of the system is its comprehensive data collection framework, capturing critical parameters such as position, orientation, and velocity, which can be leveraged for machine learning, performance optimization, and decision-making. The facility also supports the simulation of discrete operational systems, using predictive modeling to bridge informational gaps when real-time data updates are unavailable. The digital twin was validated through a matrix manufacturing system simulation, with an Augmented Reality (AR) interface on the HoloLens 2 to overlay digital information onto mobile platform controllers, enhancing situational awareness. The main contributions include a digital twin framework for deploying data-driven robotic systems and three key AR/VR integration optimization methods. Demonstrated in a laboratory setting, the system is a versatile tool for research and industrial applications, fostering insights into robotic automation and digital twin scalability while reducing costs and risks associated with real-world testing.

关键词： Service robots Navigation Metaverse Databases Scalability Digital representation Real-time systems Digital twins Mobile robots Robots

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：