检索结果-内蒙古大学图书馆

Lead-free perovskite Cs_(2)AgBiBr_(6)photodetector detecting NIR light driven by titanium nitride plasmonic hot holes

引用

Photonics Research 2024年第3期12卷 522-533页

作者： ZIJIAN LIU YUYING XI WENBO ZENG TING JI WENYAN WANG SITONG GUO LINLIN SHI RONG WEN YANXIA CUI GUOHUI LI College of Physics College of Electronic Information and Optical EngineeringKey Laboratory of Advanced Transducers and Intelligent Control System of Ministry of EducationTaiyuan University of TechnologyTaiyuan 030024China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030032China

Lead-free perovskite Cs_(2)AgBiBr_(6)manifests great potential in developing high-performance,environmentally friendly,solution-processable photodetectors(PDs).However,due to the relatively large energy bandgap,the spectrum responses of Cs_(2)AgBiBr_(6)PDs are limited to the ultraviolet and visible region with wavelengths shorter than 560 *** this work,a broadband Cs_(2)AgBiBr_(6)PD covering the ultraviolet,visible,and near infrared(NIR)range is demonstrated by incorporating titanium nitride(TiN)nanoparticles that are prepared with the assistance of self-assembled polystyrene sphere *** addition,an atomically thick Al2O3layer is introduced at the interface between the Cs_(2)AgBiBr_(6)film and TiN nanoparticles to alleviate the dark current deterioration caused by nanoparticle *** a result,beyond the spectrum range where Cs_(2)AgBiBr_(6)absorbs light,the external quantum efficiency(EQE)of the TiN nanoparticle incorporated Cs_(2)AgBiBr_(6)PD is enhanced significantly compared with that of the control,displaying enhancement factors as high as 2000 over a broadband NIR wavelength *** demonstrated enhancement in EQE arises from the photocurrent contribution of plasmonic hot holes injected from TiN nanoparticles into Cs_(2)AgBiBr_(6).This work promotes the development of broadband solution-processable perovskite PDs,providing a promising strategy for realizing photodetection in the NIR region.

关键词： perovskite titanium ultraviolet

来源：评论

学校读者我要写书评

暂无评论

Periodic and chaotic oscillations in mutual-coupled mid-infrared quantum cascade lasers

引用

Chinese Physics B 2022年第10期31卷 352-361页

作者： Zhi-Wei Jia Li Li Yi-Yan Guo An-Bang Wang Hong Han Jin-Chuan Zhang Pu Li Shen-Qiang Zhai Feng-Qi Liu Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi ProvinceCollege of Physics and OptoelectronicsTaiyuan University of TechnologyTaiyuan 030024China Key Laboratory of Semiconductor Materials Science Beijing Key Laboratory of Low Dimensional Semiconductor Materials and DevicesInstitute of SemiconductorsChinese Academy of SciencesBeijing 100083China

Dynamic states in mutual-coupled mid-infrared quantum cascade lasers(QCLs) were numerically investigated in the parameter space of injection strength and detuning frequency based on the Lang-Kobayashi equations model. Three types of period-one states were found, with different periods of injection time delay τ_(inj), 2τ_(inj), and reciprocal of the detuning frequency. Besides, square-wave, quasi-period, pulse-burst and chaotic oscillations were also observed. It is concluded that external-cavity periodic dynamics and optical modes beating are the mainly periodic dynamics. The interaction of the two periodic dynamics and the high-frequency dynamics stimulated by strong injection induces the dynamic states *** work helps to understand the dynamic behaviors in QCLs and shows a new way to mid-infrared wide-band chaotic laser.

关键词： periodic oscillations chaotic oscillations mutual-coupled quantum cascade lasers

来源：评论

学校读者我要写书评

暂无评论

Lunar Rover's Path Tracking Control Strategy Using Zero-Order Optimization Method

Lunar Rover's Path Tracking Control Strategy Using Zero-Orde...

引用

IEEE International Conference on Control Science and systems Engineering (CCSSE)

作者： Jianfei Cao Yaobing Wang Jiyang Yu Beijing Key Laboratory of Intelligent Space Robotic Systems Technology and Applications Beijing Institute of Spacecraft System Engineering Beijing China Beijing Institute of Spacecraft System Engineering Beijing China

ISBN: (数字)9798331517199

ISBN: (纸本)9798331517205

The development of lunar rovers is critical for human exploration of the lunar surface. These rovers will need to travel longer distances at higher speeds, and the efficient control of their paths is essential for mission success. Model Predictive Control (MPC) is a path tracking method with foresight and robustness, capable of predicting vehicle movement and solving optimization problems to minimize cost functions. However, the complexity of lunar environments necessitates simplified models, such as kinematic models, to reduce computational cost. The study proposes a special MPC method that uses zeroth-order gradient optimization to directly solve the nonlinear model and generate precise control commands, significantly reducing computational burden and meeting the computational cost requirements of lunar rover control.

关键词： Space vehicles Tracking Computational modeling Moon Optimization methods Kinematics Predictive models Robustness Computational efficiency Predictive control

来源：评论

学校读者我要写书评

暂无评论

3D bioprinting of in vitro porous hepatoma models:establishment,evaluation,and anticancer drug testing

引用

Bio-Design and Manufacturing 2024年第2期7卷 137-152页

作者： Xiaoyuan Wang Zixian Liu Qianqian Duan Boye Zhang Yanyan Cao Zhizhong Shen Meng Li Yanfeng Xi Jianming Wang Shengbo Sang Shanxi Key Laboratory of Micro Nano Sensors and Artificial Intelligence Perception College of Electronic Information and Optical EngineeringTaiyuan University of TechnologyTaiyuan 030024China Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education Taiyuan University of TechnologyTaiyuan 030024China Shanxi Institute of 6D Artificial Intelligence Biomedical Science Taiyuan 030031China Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering Taiyuan 030024China Department of Pathology Shanxi Provincial Cancer HospitalTaiyuan 030024China General Hospital of Taiyuan Iron and Steel Company Taiyuan 030809China

Traditional tumor models do not tend to accurately simulate tumor growth in vitro or enable personalized treatment and are particularly unable to discover more beneficial targeted *** address this,this study describes the use of threedimensional(3D)bioprinting technology to construct a 3D model with human hepatocarcinoma SMMC-7721 cells(3DP-7721)by combining gelatin methacrylate(GelMA)and poly(ethylene oxide)(PEO)as two immiscible aqueous phases to form a bioink and innovatively applying fluorescent carbon quantum dots for long-term tracking of *** GelMA(10%,mass fraction)and PEO(1.6%,mass fraction)hydrogel with 3:1 volume ratio offered distinct pore-forming characteristics,satisfactorymechanical properties,and biocompatibility for the creation of the 3DP-7721 *** analysis and quantitative real-time fluorescence polymerase chain reaction(PCR)were used to evaluate the biological properties of the *** with the two-dimensional culture cell model(2D-7721)and the 3D mixed culture cell model(3DM-7721),3DP-7721 significantly improved the proliferation of cells and expression of tumor-related proteins and ***,we evaluated the differences between the three culture models and the effectiveness of antitumor drugs in the three models and discovered that the efficacy of antitumor drugs varied because of significant differences in resistance proteins and genes between the three *** addition,the comparison of tumor formation in the three models found that the cells cultured by the 3DP-7721 model had strong tumorigenicity in nude *** evaluation of the levels of biochemical indicators related to the formation of solid tumors showed that the 3DP-7721 model group exhibited pathological characteristics of malignant tumors,the generated solid tumors were similar to actual tumors,and the deterioration was *** research therefore acts as a foundation for the application of 3DP-7721 models in drug devel

关键词： 3D bioprinting Hepatoma tumor models Drug screening Antitumor drug development

来源：评论

学校读者我要写书评

暂无评论

Research on workflow recognition for liver rupture repair surgery

引用

Mathematical Biosciences and Engineering 2024年第2期21卷 1844-1856页

作者： Men, Yutao Zhao, Zixian Chen, Wei Wu, Hang Zhang, Guang Luo, Feng Yu, Ming Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China Medical Support Technology Research Department Systems Engineering Institute Academy of Military Sciences People’s Liberation Army Tianjin300161 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

Liver rupture repair surgery serves as one tool to treat liver rupture, especially beneficial for cases of mild liver rupture hemorrhage. Liver rupture can catalyze critical conditions such as hemorrhage and shock. Surgical workflow recognition in liver rupture repair surgery videos presents a significant task aimed at reducing surgical mistakes and enhancing the quality of surgeries conducted by surgeons. A liver rupture repair simulation surgical dataset is proposed in this paper which consists of 45 videos collaboratively completed by nine surgeons. Furthermore, an end-to-end SA-RLNet, a self attention-based recurrent convolutional neural network, is introduced in this paper. The self-attention mechanism is used to automatically identify the importance of input features in various instances and associate the relationships between input features. The accuracy of the surgical phase classification of the SA-RLNet approach is 90.6%. The present study demonstrates that the SA-RLNet approach shows strong generalization capabilities on the dataset. SA-RLNet has proved to be advantageous in capturing subtle variations between surgical phases. The application of surgical workflow recognition has promising feasibility in liver rupture repair surgery. ©2024 the Author(s), licensee AIMS Press. This is an open access article distributed under the terms of the Creative Commons.

关键词： Image classification

来源：评论

学校读者我要写书评

暂无评论

Automated Adherent Cell Injection Method Based on Double-Micropipettes Operation 42

Automated Adherent Cell Injection Method Based on Double-Mic...

引用

42nd Chinese Control Conference, CCC 2023

作者： Chu, Zhaotong Cai, Linxuan Cui, MaoSheng Wang, Zuqi Zhang, Yidi Li, Minghui Zhao, Qili Sun, Mingzhu Zhao, Xin Liu, Yaowei Institute of Robotics and Automatic Information System Nankai University The Tianjin Key Laboratory of Intelligent Robotics Tianjin300071 China Tianjin Academy of Agriculture Science Tianjin300112 China Institute of Intelligence Technology and Robotic Systems Shenzhen Research Institute of Nankai University Shenzhen518083 China

ISBN: (纸本)9789887581543

Microinjection of adherent cells is a technique of inserting glass pipette into adherent cells and injecting few exogenous substances into adherent cells, which is widely used in the field of cell biology. Researchers in this field usually inject adherent cells manually, however, the microinjection operation is complicated, which requires a lot of energy and takes a lot of time. The existing automated microinjection method only uses one injection micropipette to inject, compared with the manual injection method, the microinjection process is consistent not optimized, and the injection efficiency cannot be greatly improved. In this paper, an automated adherent cell injection method based on double-micropipettes operation is proposed. Firstly, the adherent cell injection process based on double-micropipettes operation is designed. Secondly, this paper solves the key technologies of automated injection of adherent cells based on double-micropipettes operation were introduced, including adherent cell detection, injection path planning and double-micropipettes operation. Finally, the experiment of adherent cell microinjection based on double-micropipettes operation, the operation of two micropipettes was carried out. The experimental results show that the success rate of injection can reach 60% and the injection speed of this method can reach 35 cells/minute, which is 75% higher than that of manual injection with single pipette (20 cells/minute) and 40% higher than that of automated adherent cell injection with single pipette (25 cells/minute). © 2023 Technical Committee on Control Theory, Chinese Association of Automation.

关键词： Motion planning

来源：评论

学校读者我要写书评

暂无评论

Research on Robust Measurement Method of Heart Rate Using Remote Photoplethysmography Based on Adversarial Learning Network with High and Low Frequency Features

引用

IEEE Transactions on Circuits and systems for Video technology 2025年第6期35卷 5208-5222页

作者： Zhai, Dezhao Chen, Wei Ding, Yinghao Yu, Ming Li, Qinwei Wu, Hang Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology China People's Liberation Army Systems Engineering Institute Academy of Military Sciences Tianjin300161 China Civil Aviation University of China Tianjin Key Laboratory for Advanced Signal Processing Tianjin300300 China Nankai University School of Artificial Intelligence Tianjin300381 China

Remote Photoplethysmography (rPPG) is a non-contact method for measuring heart rate (HR) through facial video, breaking the constraints of contact measurements and offering broad application prospects. However, in real monitoring scenarios, the distance of subjects and facial illumination often vary. This leads to degradation of rPPG signals due to changes in facial resolution and light intensity. This paper presents the High and Low Frequency Feature Adversarial Learning Network (HLFF-AL), which utilizes feature space interpolation and composite feature capture to perform multi-band global and local signal extraction. By adopting an adversarial learning strategy, it enhances the capability to capture semantic information of rPPG under varying resolutions and lighting, bridging the differences in rPPG signal generation due to resolution changes. While maintaining accuracy in HR measuring, the robustness of the network is improved to achieve robust measurement of HR via rPPG. Even under high-resolution conditions, the Mean Absolute Error (MAE) for the three public datasets - unchanging lighting (COHFACE, UBFC-rPPG) and varying lighting (BUAA-MIHR) - reached 1.10 bpm, 1.64 bpm, and 4.41 bpm, respectively, with a mere 0.29 bpm difference in MAE between high and low resolutions on the BUAA-MIHR dataset. This demonstrates that HLFF-AL can predict more robust rPPG signals in various resolutions and lighting scenarios, achieving competitive results compared to state-of-the-art methods. © 1991-2012 IEEE.

关键词： Heart

来源：评论

学校读者我要写书评

暂无评论

Small-size temperature/high-pressure integrated sensor via flip-chip method

引用

Microsystems & Nanoengineering 2024年第4期10卷 153-162页

作者： Mimi Huang Xiaoyu Wu Libo Zhao Xiangguang Han Yong Xia Yi Gao Zeyu Cui Cheng Zhang Xiaokai Yang Zhixia Qiao Zhikang Li Feng Han Ping Yang Zhuangde Jiang State Key Laboratory for Manufacturing Systems Engineering International Joint Laboratory for Micro/Nano Manufacturing and Measurement TechnologiesXi’an Jiaotong UniversityXi’an 710049China Xi’an Jiaotong University(Yantai)Research Institute for Intelligent Sensing Technology and System Xi’an Jiaotong UniversityXi’an 710049China Shandong Laboratory of Yantai Advanced Materials and Green Manufacturing Yantai 265503China School of Mechanical Engineering Xi’an Jiaotong University710049 Xi’anChina School of Instrument Science and Technology Xi’an Jiaotong University710049 Xi’anChina Chongqing Key Laboratory of Micro-Nano Systems and Intelligent Sensing Chongqing Academician WorkstationChongqing 2011 Collaborative Innovation Center of Micro/Nano Sensing and Intelligent Ecological Internet of ThingsChongqing Technology and Business UniversityNan’an DistrictChongqing 400067China Xi’an Aerospace Yuanzheng Fluid Control Co.Ltd. Xi’an 710049China

Hydraulic technology with smaller sizes and higher reliability trends,including fault prediction and intelligent control,requires high-performance temperature and pressure-integrated *** designs rely on planar wafer-or chip-level integration,which is limited by pressure range,chip size,and low *** propose a small-size temperature/high-pressure integrated sensor via the flip-chip *** pressure and temperature units are arranged vertically,and the sensing signals of the two units are integrated into one plane through silicon vias and gold–gold bonding,reducing the lateral size and improving the efficiency of signal *** flip-chip technique ensures a reliable electrical connection.A square diaphragm with rounded corners is designed and optimised with simulation to sense high pressure based on the piezoresistive *** temperature sensing unit with a thin-film platinum resistor measures temperature and provides back-end high-precision compensation,which will improve the precision of the pressure *** integrated chip is fabricated by MEMS technology and packaged to fabricate the extremely small integrated *** integrated sensor is characterised,and the pressure sensor exhibits a sensitivity and sensitivity drift of 7.97mV/MPa and−0.19%FS in the range of 0–20 MPa and−40 to 120℃.The linearity,hysteresis,repeatability,accuracy,basic error,and zero-time drift are 0.16%FS,0.04%FS,0.06%FS,0.18%FS,±0.23%FS and 0.04%FS,*** measurement error of the temperature sensor and temperature coefficient of resistance is less than±1°C and 3142.997 ppm/℃,*** integrated sensor has broad applicability in fault diagnosis and safety monitoring of high-end equipment such as automobile detection,industrial equipment,and oil drilling platforms.

关键词： size corners sizes

来源：评论

学校读者我要写书评

暂无评论

ViT-based Terrain Recognition system for wearable soft exosuit

引用

Biomimetic Intelligence & robotics 2023年第1期3卷 57-64页

作者： Fangliang Yang Chunjie Chen Zhuo Wang Hui Chen Yao Liu Gang Li Xinyu Wua Shenzhen Institute of Advanced Technology Chinese Academy of SciencesShenzhen 518055China Shenzhen College of Advanced Technology University of Chinese Academy of SciencesShenzhen 518055China Guangdong Provincial Key Lab of Robotics and Intelligent System Shenzhen Institute of Advanced TechnologyChinese Academy of SciencesShenzhen 518055China Guangdong-Hong Kong-Macao Joint Laboratory of Human–Machine Intelligence-Synergy Systems Shenzhen 518055China SIASUN Robot and Automation CO. LtdShenyang 110169China

Terrain classification and force assistance strategies in complex environments have always piqued the interest of many *** wearable soft exosuits,inaccurate terrain recognition can easily introduce undesired assist forces that can easily injure the *** of these problems,we introduced a depth camera into the exosuit system,perform classification of terrain based on a Vision Transformer(ViT),and optimized the control algorithm,which is known as a ViT-Based Terrain Recognition system(TTRS).First,we used the Transformer algorithm to achieve a considerable classification effect in terrain *** also introduced terrain recognition as prior knowledge into the force assistance strategy of the exosuit,providing different force assistance to the exosuit in different ***,we performed human experiments with seven able-bodied people(six males and one female).The promising results demonstrate that our classification accuracy can reach 99.2%under six different terrains and that it can smoothly switch the force–assist curve in different terrains to better adapt to the complex terrain and improve the walking *** aforementioned terrain recognition algorithms and force–assist strategies may positively influence the study of soft exosuit,powered prostheses,and orthotics.

关键词： Vision Transformer(ViT) Depth camera Wearable soft exosuit Force assistance strategy Terrain recognition

来源：评论

学校读者我要写书评

暂无评论

Transcriptomic analysis of Andrias davidianus meat and experimental validation for exploring its bioactive components as functional foods

引用

Food Science and Human Wellness 2024年第1期13卷 166-172页

作者： Changge Guan Zhenglin Tan Shucheng Li Yi Wang Naoyuki Yamamoto Chong Zhang Songjun Wang Junjie Chen Xinhui Xing Key Laboratory for Industrial Biocatalysis Ministry of Education of ChinaDepartment of Chemical EngineeringTsinghua UniversityBeijing 100084China School of Life Science and Technology Tokyo Institute of TechnologyYokohama 226-0026Japan Sensing System Research Center National Institute of Advanced Industrial Science and TechnologyTsukuba 305-8565Japan Center for Synthetic and Systems Biology Tsinghua UniversityBeijing 100084China Henan Giant Salamander Protection and Development Association Luoyang 471000China Intelligent Computing Research Center Harbin Institute of TechnologyShenzhen 518071China Institute of Biopharmaceutical and Health Engineering Tsinghua Shenzhen International Graduate SchoolShenzhen 518055China Institute of Biomedical Health Technology and Engineering Shenzhen Bay LaboratoryShenzhen 518067China

Andrias davidianus(Chinese giant salamander,CGS)is the largest and oldest extant amphibian species in the world and is a source of prospective functional food in ***,the progress of functional peptides mining was slow due to lack of reference genome and protein sequence *** this study,we illustrated full-length transcriptome sequencing to interpret the proteome of CGS meat and obtain 10703 coding DNA *** functional annotation and amino acid composition analysis,we have discovered various genes related to signal transduction,and 16 genes related to *** have also found vast variety of functional peptides through protein coding sequence(CDS)analysis by comparing the data obtained with the functional peptide ***-Pro-Ile predicted by the CDS analysis was released from the CGS meat through enzymatic hydrolysis,suggesting that our approach is *** study suggested that transcriptomic analysis can be used as a reference to guide polypeptide mining in CGS meat,thereby providing a powerful mining strategy for the bioresources with unknown genomic and proteomic sequences.

关键词： Chinese giant salamander Transcriptomic analysis Bioactive components Functional peptides mining

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：