检索结果-内蒙古大学图书馆

作者： Im, Seongmin Mun, Byungphil An, Jaeyong Choi, Jongchan Yang, Sung Lee, Jonghyun School of Mechatronics Gwangju Institute of Science and Technology Gwangju Korea Republic of Graduate Program of Medical System Engineering Gwangju Institute of Science and Technology Gwangju Korea Republic of Department of Nanobio Materials and Electronics Gwangju Institute of Science and Technology Gwangju Korea Republic of

ISBN: (纸本)9789898425379

A glaucoma drainage device for the regulation of intraocular pressure is presented. The device consists of three biocompatible polymer layers: the cover (top layer), the diaphragm (intermediate layer), and the baseplate with a cannular (bottom layer). Finite element analyses (FEA) were performed to find optimal design parameters for the targeted cracking pressure: the diameter of orifice, the thickness of intermediate layer, the width of the channel, and the overlapped length of the orifice over valve seat. Top and bottom layers were made by polydimethylsiloxane (PDMS) replica molding process, and an intermediate thin layer with through-holes was fabricated by PDMS fill-in molding method and hydrophobic treatment. The overlapped area of the bottom layer was coated with Cr and Au by using PDMS as a shadow mask. Metal layers are not to be bonded between the bottom and the intermediate layers so that the device showed the enhanced reliability in operation and the higher yield in production. Oxygen plasma treatment was performed for irreversible bonds between separate three PDMS layers. The experimental cracking pressure of the fabricated valve was 2.50 kPa, which is very close to the target value (2.67 kPa). The experiments showed that the proposed polymer check valve can regulate the pressure of the aqueous humour, fluid in an anterior chamber, within the normal intraocular pressure range (15-20mmHg) with a high repeatability.

关键词： Polydimethylsiloxane

来源：评论

学校读者我要写书评

暂无评论

engineering dimensionality of collective dipole-dipole interactions using a nanophotonic environment

Engineering dimensionality of collective dipole-dipole inter...

引用

2023 Conference on Lasers and Electro-Optics, CLEO 2023

作者： Boddeti, Ashwin K. Wang, Yi Juarez, Xitlali Boltasseva, Alexandra Alaeian, Hadiseh Odom, Teri W. Jacob, Zubin Elmore Family School of Electrical and Computer Engineering Birck Nanotechnology Center Purdue University West LafayetteIN47907 United States Graduate Program in Applied Physics Northwestern University EvanstonIL60208 United States Department of Materials Science and Engineering Northwestern University EvanstonIL60208 United States Department of Chemistry Department of Materials Science and Engineering Northwestern University EvanstonIL60208 United States

ISBN: (纸本)9781957171258

We experimentally demonstrate reduced dimensionality in a interacting ensemble of emitters. The well-known stretched exponential decay dynamics, (Equation presented) with β = 0.5 in 3D geometries, is strikingly modified in a nanophotonic environment that supports long-range interaction to β ~ 0.3. © Optica Publishing Group 2023.

关键词： Nanophotonics

来源：评论

学校读者我要写书评

暂无评论

Conductive Mof Coating for Suppressing the Mn Dissolution in Limn2o4 Toward Long-Life Lithium-Ion Batteries

SSRN

引用

SSRN 2024年

作者： Kim, Eunji Lee, Jeongmin Park, Junghyun Nam, Kwan Woo Department of Chemical Engineering and Materials Science Graduate Program in System Health Science and Engineering Ewha Womans University Seoul03760 Korea Republic of

Spinel lithium manganese oxide (LiMn2O4, denoted LMO) is one of the promising cathode materials with non-toxicity, high operating voltage, and low cost. However, structural collapse during battery cycling — caused by Mn dissolution and the Jahn-Teller effect — is a critical disadvantage, reducing cycle retention, particularly at high temperatures. In this investigation, to solve these critical issues of LMO cathode, we introduce Cu3(HITP)2, a conductive two-dimensional (2D) MOF as a surface coating material through a simple process. Coating the conductive 2D Cu3(HITP)2 MOF increases the electrical conductivity and shows the effect of suppressing the dissolution of Mn by enriching the surface of LMO with Mn4+. By suppressing Mn dissolution, structural stability also improves, resulting in offsetting all the inherent problems of LMO. As a result, at 50 °C, CuHITP–LMO exhibits an initial capacity of 98.7 mAh g–1 at 100 mA g–1 and achieved a capacity of 74.5 mAh g–1 after 100 cycles, indicating outstanding cyclability. This research highlights the potential of conductive 2D MOF to improve the electrochemical performances of battery cathode. © 2024, The Authors. All rights reserved.

关键词： Cathodes

来源：评论

学校读者我要写书评

暂无评论

Cr-modified CuAlBe shape memory alloy: Role of microstructure, thermodynamic parameters, superelasticity, dissipated energy and corrosion resistance

Journal of Alloys and Metallurgical Systems

引用

Journal of Alloys and Metallurgical Systems 2024年 7卷

作者： Silva, David D.S. Candido, Gemierson V.M. Alves, Ricardo F. Dias, Elisabeth A.M.G.S. Oliveira, Danniel F. Federal University of São Carlos Graduate Program in Materials Science and Engineering SP São Carlos13565-905 Brazil Colorado School of Mines George S. Ansell Department of Metallurgical and Materials Engineering GoldenCO80401 United States Federal University of Paraíba Graduate Program in Mechanical Engineering PB João Pessoa58051-900 Brazil Federal University of Rio Grande do Norte Graduate Program in Materials Science and Engineering RN Natal59078-970 Brazil Federal University of Paraíba Graduate Program in Materials Science and Engineering PB João Pessoa58051-900 Brazil

This study reports the effects of Cr addition on the microstructure, superelasticity and corrosion resistance improvement of CuAlBe shape memory alloy. Analysis via structural, morphological, thermal, mechanical and electrochemical characterizations were performed. The analyses revealed austenite as the stable phase at room temperature for all samples. The increase in the Cr content caused a slight increase in the recovery rate and dissipated energy. Electrochemical results demonstrate that a small addition of Cr (0.1–0.3 wt%) increase the corrosion resistance due the decreases of the corrosion current density and increase of the corrosion potential. © 2024 The Authors

关键词： Corrosion resistance

来源：评论

学校读者我要写书评

暂无评论

Sugar coated stealth carbon nanotubes

Sugar coated stealth carbon nanotubes

引用

4th IEEE International Conference on Nano/Molecular Medicine and engineering, IEEE NANOMED 2010

作者： Kotagiri, Nalinikanth Kim, Jin-Woo Bio/Nano Technology Laboratory Cell and Molecular Biology Graduate Program University of Arkansas Fayetteville AR United States Bio/Nano Technology Laboratory Institute for Nanoscale Materials Science and Engineering University of Arkansas Fayetteville AR United States

ISBN: (纸本)9781612841533

Single walled carbon nanotubes (SWNT) have shown tremendous promise as agents for diagnostic and therapeutic intervention in vivo. We demonstrate how Dextran sulfate (DS) can render SWNT transparent to macrophages, a vital component of the innate immunity. We also demonstrate a site specific attachment strategy to conjugate antibodies to DS for downstream applications. DS was compared to Polyethylene Glycol (PEG) coated SWNT, a trusted standard for rendering nanoparticles immune to opsonization. © 2010 IEEE.

关键词： Polyethylene glycols

来源：评论

学校读者我要写书评

暂无评论

Reusable Hydrogen Storage Tank with Flange Design 10

Reusable Hydrogen Storage Tank with Flange Design

引用

10th International Conference on Applied System Innovation, ICASI 2024

作者： Li, Yun-Qi Chen, Hsuan-Jung Yang, Hsi-Wen Chen, Chih-Yuan Chang, Shao-Fu Chen, Ssu-Ying Chen, Chien-Chon College of Engineering and Science Ph.D. Program in Materials and Chemical Engineering National United University Miaoli Taiwan Michigan State University Department of Chemistry MI48824 United States National United University Department of Materials Engineering Miaoli Taiwan Graduate Institute of Intellectual Property National Taipei University of Technology Taiwan National United University Department of Energy Engineering Miaoli Taiwan

ISBN: (纸本)9798350394924

For how to store and transport hydrogen, the first thought is to store hydrogen directly in the cylinder. However, this method is not desirable, because generally at least 700 atm high pressure, the hydrogen contained in the cylinder to be useful. Therefore it is very unsafe at such high pressures. In This paper, we design and production of a new generation of solid-state hydrogen storage and discharge container. The goal of 'development of solid-state hydrogen storage technology' is to break through the bottlenecks of hydrogen storage technology safety, hydrogen storage density, high-efficiency hydrogen absorption and release, transportation safety, and engineering practice. © 2024 IEEE.

关键词： Aluminum

来源：评论

学校读者我要写书评

暂无评论

Flexible cellulose-carbon nanotube paper substrate decorated with PZT: sensor properties

Flexible cellulose-carbon nanotube paper substrate decorated...

引用

MRS Advances

作者： Silva, Ricardo M. Noremberg, Bruno S. Marins, Natália H. Alano, Jose H. Santana, Luiza R. Valentini, Antoninho Lukowiec, Dariusz Tański, Tomasz Carreño, Neftalí L.V. Graduate Program in Materials Science and Engineering Technology Development Center Federal University of Pelotas PelotasRS96010-000 Brazil Federal University of Ceará Department of Analytical Chemistry and Chemical Physics FortalezaCE Brazil Institute of Engineering Materials and Biomaterials Silesian University of Technology Gliwice Poland Center for Nanotechnology Silesian University of Technology Gliwice Poland

Composite of PZT (lead zirconate titanate) and PLZT (lead lanthanum zirconate titanate) along an organic, renewable, conductive, and flexible matrix have been developed. The conductive paper was obtained through the reaction between the cellulose extracted from banana stem and functionalized MWCNT. This reaction was made in the presence of hydrogen (from H2SO4), which reduced the size of the cellulose by acid hydrolysis and promotes the interaction between its hydroxyls and the carboxyl groups of nanotubes. Afterward, the PZT particles were synthesized and grown up on the conductive paper by microwaves-assisted hydrothermal synthesis (MHS). The composite material was characterized by structure and morphology. Moreover, gas-sensing in the presence of methanol and electrical resistance as a function of temperature were also investigated. In this way, a simple, low-cost and successful synthesis was reported. Also, a promising flexible was obtained using a chemical transformation process from banana residue as source of cellulose. Copyright © materials Research Society 2018.

关键词： Cellulose

来源：评论

学校读者我要写书评

暂无评论

No external load measurement strategy for micro thermoelectric generator based on high-performance Si_(1-x-y)Ge_(x)Sn_(y) film

引用

Journal of Materiomics 2021年第4期7卷 665-671页

作者： Ying Peng Sijing Zhu Huajun Lai Jie Gao Masashi Kurosawa Osamu Nakatsuka Sakae Tanemura Biaolin Peng Lei Miao Guangxi Key Laboratory of Information Material School of Material Science and EngineeringGuilin University of Electronic TechnologyGuilin541004China Department of Materials Physics Graduate School of EngineeringNagoya UniversityNagoya464-8603Japan PRESTO Japan Science and Technology Agency4-1-8HonchoKawaguchiSaitama332-0012Japan Institute of Materials and Systems for Sustainability Nagoya UniversityNagoya464-8601Japan Japan Fine Ceramics Center 2-4-1 MutsunoAtsuta-kuNagoya456-8587Japan Center on Nanoenergy Research Guangxi Key Laboratory of Processing for Non-ferrous Metal and Featured MaterialsGuangxi Key Laboratory for Relativity AstrophysicsNanning530004China Department of Materials Science and Engineering SIT Research LaboratoriesInnovative Global ProgramFaculty of EngineeringShibaura Institute of TechnologyTokyo135-8548Japan

In this study,a micro in-plane p-type thermoelectric generator(TEG),which consists of thin-film Si_(1-x-y)Ge_(x)Sn_(y) ternary alloy semiconductor on insulator,is developed to make efficient use of waste heat such as human body.A power factor value as high as 1095 mWm^(-1) K^(-2) had been achieved using Bion implanted and short-term rapid thermal annealing(RTA)*** addition,a measuring scheme for micro TEG without external load resistance was *** one measuring session,multiple parameters can be *** micro single-arm TEG prepared by semiconductor process can output 0.29 nW power at a temperature difference of 15 K,and a cross-sectional power density has reached up to 0.58 mW/cm^(2),which is a superior value for wearable *** findings of this study have important reference value for wearable device performance improvement and output power measuring of micro TEG.

关键词： Si_(1-x-y)Ge_(x)Sn_(y) film P-type TEG No external load measurement Ambient power density

来源：评论

学校读者我要写书评

暂无评论

Mechanistic and theoretical investigation of acetaminophen adsorption on titanium-coated biochar: Statistical physics models and DFT insights

引用

Surfaces and Interfaces 2025年 69卷

作者： Ronaldo Antunes Funari Junior Ana Carolina Ferreira Piazzi Fuhr Fernando Machado Machado Marcos Leandro Silva Oliveira Luis Felipe Oliveira Silva Salah Knani Besma Graba Guilherme Luiz Dotto Research Group on Adsorptive and Catalytic Process Engineering (ENGEPAC) Federal University of Santa Maria Av. Roraima 1000-7 97105–900 Santa Maria RS Brazil Materials Science and Engineering Graduate Program Federal University of Pelotas (UFPel) 1 Gomes Carneiro St. 96010-610 Pelotas RS Brazil Universidad De La Costa Calle 58 # 55–66 080002 Barranquilla Atlántico Colombia Center for Scientific Research and Entrepreneurship Northern Border University Arar 73213 Saudi Arabia Department of Physics College of Science Northern Border University Arar Saudi Arabia

This study investigated acetaminophen removal using biochar from Pinus elliottii modified by titanium deposition under different conditions. The raw biochar was initially obtained, and then the magnetron sputtering technique was applied to deposit thin films of titanium on the biochar surface under different conditions. The effect of titanium deposition was evaluated by an integrated approach that included physicochemical characterization of the adsorbent materials, statistical physics modeling, and theoretical analysis by Density Functional Theory (DFT), allowing an in-depth understanding of the adsorption mechanism at the macroscopic and molecular levels. Models based on statistical physics indicated that the removal process occurs predominantly by physical adsorption (adsorption energy between 19.71 and 24.75 kJ mol −1 ), with the formation of double layers and variations in the adsorption energy according to the metal deposition conditions. The steric parameters ( n > 0.5) revealed changes in the adsorption geometry, and the number of molecules adsorbed per site correlated with the titanium deposition conditions. DFT analysis showed electronegative regions in the O11 and O16 atoms with Condensed Double Descriptors (CDD = –0.0637 and –0.0511), associated with forming hydrogen bonds with the biochar. The distribution of the frontier orbitals showed a HOMO-LUMO gap of 5.24 eV, indicating the high electronic stability of the molecule. The results demonstrate that titanium deposition selectively modifies the adsorptive properties of biochar, interaction energies, and adsorption geometry.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Incorporation of lead containing TV tube glass waste in aluminous porcelain

Incorporation of lead containing TV tube glass waste in alum...

引用

作者： Santos, Talita Faria Paes, Herval Ramos Holanda, José Nilson França Post-Graduate Program in Materials Science and Engineering - PPGECM Universidade Estadual do Norte Fluminense - UENF Campos dos Goytacazes RJ28013-602 Brazil Laboratory of Advanced Materials - LAMAV Universidade Estadual do Norte Fluminense - UENF Campos dos Goytacazes RJ28013-602 Brazil

The aim of this work was to study the incorporation of lead containing TV tube glass waste as a method to provide alternative raw material for aluminous electrical porcelain. For this purpose, aluminous porcelain formulations containing up to 30 wt.% of TV tube glass waste as a replacement for traditional flux material (sodium feldspar) were pressed and fired in air at 1300 ºC using a fast-firing cycle (11 Ω.cm have high potential to work as electrical insulator material. This use of lead containing TV tube glass waste can contribute greatly to reducing the environmental impacts related to it, and also save the sources of non-renewable raw materials used in the electrical porcelain sector. © 2017 Universidade Federal de Sao Carlos. All rights reserved.

关键词： Glass

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：