检索结果-内蒙古大学图书馆

Development of LiFx/Al2O3/ITO Multilayer Antireflection Coatings for Reflectance Reduction in Silicon Heterojunction Solar Cells

引用

Physica Status Solidi (A) Applications and Materials Science 2025年第0期

作者： Aida, Maha Nur Khokhar, Muhammad Quddamah Yousuf, Hasnain Chu, Mengmeng Rahman, Rafi Ur Alamgeer, Khan Bae, Junhan Jang, Seokjin Yi, Junsin Department of Future Energy Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of Department of Electrical and Computer Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of

This study focuses on the optimization of antireflection coatings (ARCs) to enhance the performance of silicon heterojunction (SHJ) solar cells. SHJ solar cells face a significant challenge in achieving their theoretical efficiency limits due to light reflection at the air–cell interface. This reflection reduces photon absorption, which limits photocurrent generation and hinders the widespread adoption of SHJ technology. To address this, the optimization of ARCs using single, double, and triple-layer designs with a graded refractive index material as the active layer is investigated. The optimization process is simulated by calculating the layer thicknesses using OPAL2 software and validated through experimental deposition. The results demonstrate that a triple-layer ARC structure consisting of 80/50/95 nm of indium tin oxide (ITO), aluminum oxide (Al2O3), and lithium fluoride (LiFx) significantly improves SHJ performance. This configuration leads to a 1.04 mA cm−2 increase in short-circuit current density (Jsc), reaching 39.85 mA cm−2, and an efficiency of 21.62%, compared to a single-layer ARC. This study presents a promising solution to improve SHJ solar cell efficiency by reducing reflection losses and optimizing optical properties, contributing to the advancement of SHJ technology and facilitating the development of more efficient and cost-effective photovoltaic systems for sustainable energy transition. © 2025 Wiley-VCH GmbH.

关键词： Antireflection coatings

来源：评论

学校读者我要写书评

暂无评论

High-Efficiency Power Generation for Floating photovoltaic systems: Economic Viability and Simulation Analysis

引用

Physica Status Solidi (A) Applications and Materials Science 2025年第10期222卷

作者： Wang, Xiaobo Yousuf, Hasnain Chu, Mengmeng Polgampola, Chamani Madara Mohammed, Shurouq Abdulqadir Khokhar, Muhammad Quddamah Park, Sangheon Yi, Junsin Department of Electrical and Computer Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of College of Information and Communication Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of

As global demand for renewable energy continues to rise and available land resources become increasingly scarce, floating photovoltaic (FPV) systems have emerged as a cost-effective solution to meet energy needs while minimizing environmental impacts. In 2023, the global installed capacity of FPV reached 5.9 GW and is projected to grow to 10 GW by 2030. This review systematically examines the current status and historical development of floating solar technology, focusing on key challenges and solutions in structural design and material selection. It also explores methods to enhance FPV efficiency, including optimal tilt angles, cooling systems, bifacial modules, and tracking systems, while addressing the economic feasibility of FPV. Furthermore, a simulated 2 MW FPV system based on meteorological data from Suwon, South Korea, is analyzed. The system demonstrates a high-performance ratio of 90.5% and a maximum system production output of 1835 MWh when the tilt angle is optimized between 32° and 34° and the azimuth angle is set to 0°. © 2025 Wiley-VCH GmbH.

关键词： floating solar high efficiency photovoltaic modules renewable energies simulations

来源：评论

学校读者我要写书评

暂无评论

Low Power Consumption of Non-Volatile Memory Device by Tunneling Process engineering

SSRN

引用

SSRN 2024年

作者： Wang, Fucheng Chu, Mengmeng Chen, Jingwen Pan, Zhong Kim, Yongsang Song, Jang Kun Yi, Junsin Khokhar, Muhammad Quddamah Department of Electrical and Computer Engineering Sungkyunkwan University Suwon16419 Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Suwon16419 Korea Republic of College of Information and Communication Engineering Sungkyunkwan University Suwon16419 Korea Republic of

Compared with Si3N4 and Al2O3, SiO2 grown using thermal oxidation process as tunneling layer has the advantages of high bandgap and well interface contact with the surface of silicon wafer, which can be a great solution to the leakage current problem of metal-insulator-semiconductor (MIS) devices. This study investigates the effect of improving the SiO2 tunnel layer on the operating voltage of MIS devices with a SiO2/HfAlOx/Al2O3 structure. The result shows the operating voltage changes as the tunneling layer thickness decreases, with a minimum of only 12 V for a 1.5 nm tunneling layer thickness. In addition, we found that pinholes are generated on the film surface when annealing a 1.5 nm SiO2 tunnel layer at 850 °C N2, in which case the operating voltage of the device is reduced to only 10 V, though it was also accompanied by the deterioration of the retention characteristics. © 2024, The Authors. All rights reserved.

关键词： Silicon wafers

来源：评论

学校读者我要写书评

暂无评论

Performance of Building-Integrated photovoltaic and Addressing the Challenges of Color, Safety, and Light-Emitting Diode Integration

引用

Physica Status Solidi (A) Applications and Materials Science 2025年第10期222卷

作者： Mohammed, Shurouq Abdulqadir Yousuf, Hasnain Jony, Jaljalalul Abedin Khokhar, Muhammad Quddamah Rahman, Rafi Ur Aida, Maha Nur Alamgeer Park, Sangheon Yi, Junsin Department of Electrical and Computer Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of Department of Future Energy Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of College of Information and Communication Engineering Sungkyunkwan University Gyeonggi-Do Suwon16419 Korea Republic of

Building-integrated photovoltaics (BIPVs) provide a dual-purpose solution, functioning as both energy-generating systems and integral building materials. BIPV adoption has been limited due to a lack of color integration, preventing the panels from being used in building designs. However, efforts to incorporate color into the BIPV layers have been made, but they often reduce panel efficiency. BIPV implementation faces several challenges that hinder widespread adoption, such as fire safety concerns and the integration of color aesthetics and light-emitting diode technology. This article explores these challenges and recent advancements that enhance the aesthetic versatility and efficiency of BIPV systems, including the use of quantum dots, Bragg reflectors, and silver-alloyed copper indium gallium selenide cells. The study also highlights critical considerations for optimizing BIPV systems, such as energy performance and fire safety. PVsyst 7.2 simulation results for a 10 kW BIPV system installed in South Korea demonstrate effective strategies for mitigating efficiency losses through investigating the orientation of angles. Results showcase a high-performance ratio of 0.891, a high production of 14 147 kWh year−1 at a tilt angle of 30° while facing south, and a peak energy of almost 1450 kWh injected into the grid under varying conditions. © 2025 Wiley-VCH GmbH.

关键词： building-integrated photovoltaics colors efficiencies light-emitting diodes technologies

来源：评论

学校读者我要写书评

暂无评论

Comprehensive Performance Evaluation of Topcon, Hit, and Perc Tandem Solar Cells: Analysing Performance and Stability

SSRN

引用

SSRN 2024年

作者： Yi, Junsin Rahman, Rafi Ur Khokhar, Muhammad Quddamah Madara, Polgampola Chamani Aida, Maha Nur Jony, Jaljalalul Abedin Alamgeer Yousuf, Hasnain Chu, Mengmeng Park, Sangheon Department of Electrical and Computer Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of Department of Future Energy Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of Research Institute for Clean Energy College of Information and Communication Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of

The evolution of photovoltaic technologies has led to significant advancements in tandem solar cells, notably TOPCon, HIT, and PERC cells. Historically, these technologies have demonstrated substantial improvements in efficiency and stability. This study conducts a comprehensive performance evaluation of TOPCon, HIT, and PERC tandem solar cells by measuring light current-voltage (LIV) characteristics in both series and parallel connections under varying sunlight intensities (0 to 0.5 suns). The maximum efficiency recorded for the TOPCon/TOPCon cells in series connection was 6.63%, while in parallel, it was 25.78%. For HIT/HIT cells, series and parallel connections yielded maximum efficiencies of 27.00% and 6.58%, respectively. PERC/PERC cells achieved efficiencies of 17.81% in series and 21.38% in parallel. These results were obtained by systematically varying the sunlight intensity from 0 to 0.5 suns, revealing that TOPCon technology excels under low-light conditions. Future work will optimize material properties and interconnection methods to enhance performance and commercial viability. © 2024, The Authors. All rights reserved.

关键词： Current voltage characteristics

来源：评论

学校读者我要写书评

暂无评论

Analysis of Selective Emitter Formation Technology of n-TOPCon Solar Cell

引用

Transactions of the Korean Institute of Electrical Engineers 2022年第1期71卷 114-120页

作者： Jeong, Sungjin Cha, Yewon Kim, Sungheon Kim, Hongrae Park, Somin Kim, Taeyong Park, Jinjoo Ju, Minkyu Yi, Junsin Dept. of Electrical and Computer Engineering Sungkyunkwan University Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Korea Republic of Dept. of Energy Convergence Engineering Division of Energy & Optical Technology Convergence Cheongju University Korea Republic of College of Information and Communication Engineering Sungkyunkwan University Korea Republic of

The main efficiency limiting factors for homogeneous emitter solar cells are resistance loss through metal contact on the front side and recombination loss at the surface. Herein, a selective emitter technology is introduced to solve the above problem, and it is currently commercialized in the mainstream p-PERC (Passivated Emitter Rear Contact) solar cell. The selective emitter boosts efficiency by 0.3-0.4% when compared to a homogeneous emitter, and when applied to the n-TOPCon (Tunnel Oxide Passivated Contact) solar cell, high efficiency of 26% or higher may be predicted. The most widely utilized selective emitter technologies are laser and etch-back. The One-Step Technology, which is suited to the n-TOPCon solar cell process, a laser is suitable for mass manufacturing with high yield. Because selective emitters increase electrical characteristics, which impact cell efficiency, it is required to study and create a technology that is optimal for the n-TOPCon manufacturing process. © 2022 Korean Institute of Electrical Engineers. All rights reserved.

关键词： Efficiency

来源：评论

学校读者我要写书评

暂无评论

Analysis of the mechanism of degradation of p-type silicon solar cell

引用

Transactions of the Korean Institute of Electrical Engineers 2021年第8期70卷 1181-1187页

作者： Cha, Yewon Jeong, Sungjin Kim, Sungheon Kim, Youngkuk Yi, Junsin Dept. of Electrical and Computer Engineering Sungkyunkwan University Korea Republic of Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Korea Republic of College of Information and Communication Engineering Sungkyunkwan University Korea Republic of

Two main factors that limiting the efficiency of the p-type solar cells are LID(Light Induced Degradation) and LeTID(Light and elevated temperature induced degradation). The major cause of LID is the formation of boron-oxygen defects in boron doped silicon. The LeTID is similar kinds as LID, but also occurs in the dark condition and by the recombination of metals and impurities or the reaction between the hydrogen and arbitrary substance. An overall 7% of LeTID degradation rate occurs over long-term scales. Unexpectedly, these degradations have been recently found to also arises in high purity materials such as float-zone(Fz-Si) and Czochralski-grown(Cz-Si). The proposed method to reduce these two degradations is to use appropriate firing process and annealing conditions. © 2021 Korean Institute of Electrical Engineers. All rights reserved.

关键词： Degradation

来源：评论

学校读者我要写书评

暂无评论

Synthesis and Simulation Study of Titanium Dioxide-Based Nanomaterial for Electron Carrier Selective Contact Solar Cell

SSRN

引用

SSRN 2024年

作者： Yi, Junsin Rahman, Rafi Ur Aslam, Junaid Jony, Jaljalalul Abedin Aida, Maha Nur Mengmeng, Chu Hussain, Shahzada Qamar Park, Sangheon Khan, Alamgeer Khokhar, Muhammad Quddamah Yousuf, Hasnain Department of Electrical and Computer Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of Department of Physics COMSATS University Islamabad Lahore Campus Lahore54000 Pakistan Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of Department of Future Energy Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of Research Institute for Clean Energy College of Information and Communication Engineering Sungkyunkwan University Gyeonggi-do Suwon16419 Korea Republic of

This research focused on synthesizing titanium dioxide (TiO2) nanomaterials using the sol-gel method to improve Silicon Heterojunction (SHJ) solar cells. Iso-Propanol Alcohol and Titanium Tetra Isopropoxides were used in the synthesis process. TiO2's wide bandgap and low work function make it a suitable replacement for these cells' n-doped amorphous silicon layer. Atomic Force Microscopy (AFM) measured the roughness and 3D profile, while UV-V spectrophotometry assessed absorption. The nanomaterials' structure and surface morphology were analyzed using Scanning Electron Microscopy (SEM) and Transmission Electron Microscope (TEM). Simulations using the AFORS-HET simulator showed that the refractive index of TiO2 and a-Si:H(n), TiO2 with a work function of 4.6 eV enhanced the solar cells' performance by 22.57%, achieving an open-circuit voltage (Voc) of 716.8 mV, a short-circuit current density (Jsc) of 37.71 mA/cm2, a fill factor (FF) of 83.49. Future work will focus on refining TiO2's nanostructure to further advance its photovoltaic applications. © 2024, The Authors. All rights reserved.

关键词： Titanium dioxide

来源：评论

学校读者我要写书评

暂无评论

Publisher’s Note: “Ultraviolet nanosecond laser ablation of polyimide with thermal and nonthermal effects near threshold fluence” [J. Laser Appl. 34, 032004 (2022)]

引用

Journal of Laser Applications 2022年第3期34卷

作者： ChangSoon Han Muhammad Aleem Zahid Byungwoo Lee Jae-Yong Oh Youngkuk Kim Junsin Yi 1Laser Advanced System Industrialization Center Jeonnam Technopark Stiftung Jeollanam-do Jangseong-gun 57248 Republic of Korea 2Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Suwon Gyeonggi-Do Suwon 16419 Republic of Korea 3Department of Electrical and Computer Engineering Sungkyunkwan University Suwon Gyeonggi-Do 16419 South Korea

This article was published online on 17 June 2022 with an error in the affiliations and corresponding author information. The affiliations and footnote appear c

关键词：

来源：评论

学校读者我要写书评

暂无评论

Erratum: “Ultraviolet nanosecond laser ablation of polyimide with thermal and nonthermal effects near threshold fluence” [J. Laser Appl. 34, 032004 (2022)]

引用

Journal of Laser Applications 2022年第1期35卷

作者： ChangSoon Han Muhammad Aleem Zahid Byungwoo Lee Jae-Yong Oh Youngkuk Kim Junsin Yi Bo Sung Shin 1Laser Advanced System Industrialization Center Jeonnam Technopark Stiftung Jangseong-gun Jeollanam-do 57248 Republic of Korea 2Interdisciplinary Program in Photovoltaic System Engineering Sungkyunkwan University Suwon Gyeonggi-Do Suwon 16419 Republic of Korea 3Department of Electrical and Computer Engineering Sungkyunkwan University Gyeonggi-Do Suwon 16419 South Korea 4Department of Optics and Mechatronics Engineering Pusan National University Pusan 46241 Korea

The paper published with an error in the author list. The author list has been corrected as shown. Additionally, ChangSoon Han and Muhammad Aleem Zahid should h

关键词：

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：