检索结果-内蒙古大学图书馆

Workshop 7 2017

作者： Keming Liu Deping Lu Kai Fu Peilan Luo Zhikai Huang Wei Guo Jiuming Yu Jin Zou Qiang Hu Jiangxi Key Laboratory for Precision Drive and Control Nanchang Institute of Technology Jiangxi Key Laboratory for Advanced Copper and Tungsten Materials Jiangxi Academy of Sciences

This paper studied the microstructure evolution of a deformation-processed Cu-7 Cr in situ composite prepared by thermo-mechanical *** longitudinal and transverse sectional microstructures were analyzed using an optical microscope and a scanning electronic *** the longitudinal section,the initially randomly distributed Cr dendrites in the as-cast Cu-7 Cr alloy were transformed into the fibres aligned parallel to the drawing axis;the Cr dendrites experienced breaking,flattening and rotating,lapping and merging,and homogenizing and refinement during thermo-mechanical *** the transverse section,the initially randomly distributed Cr dendrites in the as-cast Cu-7 Cr alloy were changed into the curvy ribbon like fibres;the Cr dendrites underwent breaking,flattening and rotating,folding and twisting,and irregularizing and refinement during thermo-mechanical processing.

关键词： Cu-Cr in situ Composite Evolution Microstructure Thermo-Mechanical Processing

来源：评论

学校读者我要写书评

暂无评论

Hybrid Consensus-based Algorithm for Distributed Economic Dispatch Problem

引用

IFAC-PapersOnLine 2017年第1期50卷 177-182页

作者： Liu X.-K. Wang Y.-W. Yan H. Wang X. Hu X. School of Automation Huazhong University of Science and Technology Wuhan 430074 China Key Laboratory of Image Processing and Intelligent Control (Huazhong University of Science and Technology) Ministry of Education China Key Laboratory of Advanced Control Optimization for Chemical Process of Ministry of Education China School of Information Science and Engineering East China University of Science and Technology 130 Meilong Road Shanghai 200237 China

Economic dispatch is one of the fundamental problems in the power system research. The existing algorithms are either discrete iterative algorithms or continuous-time dynamical algorithms. By virtue of the hybrid techniques, a hybrid consensus-based algorithm is proposed in this paper, which consists of a finite-time continuous-time algorithm and a discrete-time interacted scheme. Moreover, inspired by the cluster synchronization and the benefit of the projection operator, a supervised strategy is carried out to ensure that each generator unit will work within its power generation constraint. For a better understanding of the supervised hybrid distributed algorithm, the detailed pseudo-code is presented. Finally, a numerical example is given to illustrate the effectiveness of the algorithm. © 2017

关键词： consensus protocol distributed optimization economic dispatch hybrid system smart grid

来源：评论

学校读者我要写书评

暂无评论

Cooperative game based cost analysis of multi-plant heat exchanger network integration in chemical Industry Park

引用

Chemical Engineering Transactions 2017年 61卷 1219-1224页

作者： Jin, Yuhui Li, Shaojun Jiang, Da Key Laboratory of Advanced Control and Optimization for Chemical Processes East China University of Science and Technology Shanghai200237 China

Industrial energy saving is essential to the plant in the chemical industry park. Heat exchanger network of multi-plant can recover more potential energy. To ensure the network construction successfully, co-construct cost must be allocated reasonably. Cooperative game-theory based approach combines "Core" and "Riskbased Shapley value" with the network structure is put forward to give a contribute-equal cost imputation. A case study which includes three chemical plants is used to describe the approach and shows its practice value. The case study used Risk-based Shapley value illustrated plant which is confronted with high risk-loss will participate in the co-construction with lower cost, which means high risk and high yielded side by side. Copyright © 2017, AIDIC Servizi S.r.l.

关键词： Energy conservation

来源：评论

学校读者我要写书评

暂无评论

Tracking performance limitations of mimo networked control systems with multiple communication constraints

arXiv

引用

arXiv 2019年

作者： Chen, Chao-Yang Gui, Weihua Wu, Lianghong Liu, Zhaohua Yan, Huaicheng School of Information and Electrical Engineering Hunan University of Science and Technology Xiangtan411201 China School of Information Science and Engineering Central South University Changsha410012 China Center for Polymer Studies Department of Physics Boston University BostonMA02215 United States School of Information Science and Engineering Central South University Changsha410012 China School of Information and Electrical Engineering Hunan University of Science and Technology Xiangtan411201 China Key Laboratory of Advanced Control and Optimization for Chemical Process of Ministry of Education East China University of Science and Technology Shanghai200237 China College of Mechatronics and Control Engineering Hubei Normal University Huangshi435002 China

In this paper, the tracking performance limitation of networked control systems (NCSs) is studied. The NCSs is considered as continuous-time linear multi-input multi-output (MIMO) systems with random reference noises. The controlled plants include unstable poles and non-minimum phase (NMP) zeros. The output feedback path is affected by multiple communication constraints. We focus on some basic communication constraints, including additive white noise (AWN), quantization noise, bandwidth, as well as encoder-decoder. The system performance is evaluated with the tracking error energy, and used a two-degree of freedom (2DOF) controller. The explicit representation of the tracking performance is given in this paper. The results indicate the tracking performance limitations rely to internal characteristics of the plant (unstable poles and NMP zeros), reference noises (the reference noise power distribution (RNPD) and its directions) and the characteristics of communication constraints. The characteristics of communication constraints include communication noise power distribution (CNPD), quantization noise power distribution (QNPD), and their distribution directions, transform bandwidth allocation (TBA), transform encoder-decoder allocation (TEA), and their allocation directions, and NMP zeros and MP part of bandwidth. Moreover, the tracking performance limitations are also affected by the angles between the each transform NMP zero direction and RNPD direction, and these angles between each transform unstable poles direction and the direction of communication constraint distribution/allocation. In addition, for MIMO NCSs, bandwidth (there are not identical two channels) always can affects the direction of unstable poles, and the channel allocation of bandwidth and encode-decode may be used for a feasible method for the performance allocation of each channels. Lastly, a instance is given for verifying the effectiveness of the theoretical outcomes. Copyright © 2019, The Aut

关键词： Bandwidth

来源：评论

学校读者我要写书评

暂无评论

Multi-mode process monitoring based on a novel weighted local standardization strategy and support vector data description

引用

Journal of Central South University 2016年第11期23卷 2896-2905页

作者：赵付洲宋冰侍洪波 Key Laboratory of Advanced Control and Optimization for Chemical Processes of Ministry of Education(East China University of Science and Technology) Shanghai 200237China

There are multiple operating modes in the real industrial process, and the collected data follow the complex multimodal distribution, so most traditional process monitoring methods are no longer applicable because their presumptions are that sampled-data should obey the single Gaussian distribution or non-Gaussian distribution. In order to solve these problems, a novel weighted local standardization(WLS) strategy is proposed to standardize the multimodal data, which can eliminate the multi-mode characteristics of the collected data, and normalize them into unimodal data distribution. After detailed analysis of the raised data preprocessing strategy, a new algorithm using WLS strategy with support vector data description(SVDD) is put forward to apply for multi-mode monitoring process. Unlike the strategy of building multiple local models, the developed method only contains a model without the prior knowledge of multi-mode process. To demonstrate the proposed method's validity, it is applied to a numerical example and a Tennessee Eastman(TE) process. Finally, the simulation results show that the WLS strategy is very effective to standardize multimodal data, and the WLS-SVDD monitoring method has great advantages over the traditional SVDD and PCA combined with a local standardization strategy(LNS-PCA) in multi-mode process monitoring.

关键词： multiple operating modes weighted local standardization support vector data description multi-mode monitoring

来源：评论

学校读者我要写书评

暂无评论

BCI-based strategies on stroke rehabilitation with avatar and FES feedback

arXiv

引用

arXiv 2018年

作者： Qiu, Zhaoyang Chen, Shugeng Allison, Brendan Z. Jia, Jie Wang, Xingyu Jin, Jing Key Laboratory of Advanced Control and Optimization for Chemical Processes Ministry of Education East China University of Science and Technology Shanghai China Department of Neurology Huashan hospital Fudan University Shanghai China Department of Cognitive Science University of California at San Diego San DiegoCA United States

Background: Stroke is the leading cause of serious and long-term disability worldwide. Survivors may recover some motor function after rehabilitation therapy. Some studies have shown that motor imagery (MI) based BCI has a positive effect in poststroke rehabilitation. It could help patients promote the reorganization processes in the damaged brain regions. However, offline motor imagery and conventional online motor imagery with feedback (such as rewarding sounds and movements of an avatar) could not reflect the true intention of the patients. Method: In this study, both virtual limbs and functional electrical stimulation (FES) were used as feedback to provide patients a closed-loop sensorimotor integration for motor rehabilitation. Motor imagery based BCI system acquired, analyzed and recognized the EEG data of motor imagery from patients. The FES system would activate if the user was imagining hand movement of instructed side. Ten stroke patients (7 male, aged 22-70 years, mean 49.5±15.1) were involved in this study. All of them participated in BCI-FES rehabilitation training for 4 weeks. Results: The average motor imagery accuracies of the ten patients in the last week were 71.3%, which has improved 3% than that in the first week. Five patients' Fugl-Meyer Assessment (FMA) scores have been raised. Patient 6, who has have suffered from stroke over two years, achieved the greatest improvement after rehabilitation training (pre FMA: 20, post FMA: 35). In the aspect of brain patterns, the active patterns of the five patients gradually became centralized and shifted to sensorimotor areas (channel C3 and C4) and premotor area (channel FC3 and FC4). Conclusions: In this study, motor imagery based BCI and FES system were combined to provided stoke patients with a closed-loop sensorimotor integration for motor rehabilitation. Result showed evidences that the BCI-FES system is effective in restoring upper extremities motor function in stroke. In future work, more cases are

关键词： Brain computer interface

来源：评论

学校读者我要写书评

暂无评论

Teaching-Learning-Based optimization with Learning Enthusiasm Mechanism and Its Application in Chemical Engineering

引用

Journal of Applied Mathematics 2018年第1期2018卷

作者： Chen, Xu Xu, Bin Yu, Kunjie Du, Wenli School of Electrical and Information Engineering Jiangsu University Zhenjiang Jiangsu212013 China Key Laboratory of Advanced Control and Optimization for Chemical Processes Ministry of Education East China University of Science and Technology Shanghai200237 China School of Mechanical Engineering Shanghai University of Engineering Science Shanghai201620 China School of Electrical Engineering Zhengzhou University Zhengzhou450001 China

Teaching-learning-based optimization (TLBO) is a population-based metaheuristic search algorithm inspired by the teaching and learning process in a classroom. It has been successfully applied to many scientific and engineering applications in the past few years. In the basic TLBO and most of its variants, all the learners have the same probability of getting knowledge from others. However, in the real world, learners are different, and each learner's learning enthusiasm is not the same, resulting in different probabilities of acquiring knowledge. Motivated by this phenomenon, this study introduces a learning enthusiasm mechanism into the basic TLBO and proposes a learning enthusiasm based TLBO (LebTLBO). In the LebTLBO, learners with good grades have high learning enthusiasm, and they have large probabilities of acquiring knowledge from others;by contrast, learners with bad grades have low learning enthusiasm, and they have relative small probabilities of acquiring knowledge from others. In addition, a poor student tutoring phase is introduced to improve the quality of the poor learners. The proposed method is evaluated on the CEC2014 benchmark functions, and the computational results demonstrate that it offers promising results compared with other efficient TLBO and non-TLBO algorithms. Finally, LebTLBO is applied to solve three optimal control problems in chemical engineering, and the competitive results show its potential for real-world problems. © 2018 Xu Chen et al.

关键词： Computational efficiency

来源：评论

学校读者我要写书评

暂无评论

Soft sensor based on recursive kernel partial least squares for 4-carboxybenzaldehyde of an industrial terephthalic acid hydropurification process

引用

Chemical Engineering Transactions 2017年 61卷 463-468页

作者： Li, Zhi Zhong, Weimin Peng, Xin Du, Wenli Qian, Feng Key Laboratory of Advanced Control and Optimization for Chemical Processes Ministry of Education East China University of Science and Technology Shanghai200237 China

Terephthalic acid is a raw material for polyester and textile industry. However, the by-product 4-Carboxybenzaldehyde in TA is harmful to the polymer process since it can lower the polymerization rate and the average molecular weight. Thus, a hydropurification process is built to decrease 4-CBA. In this process, 4-CBA in TA is purified by hydrogen in water at 270 °C-290 °C under 7.9 MPa pressure over 0.5 wt. % carboncoated palladium catalyst in a fixed-bed reactor. The activity of the catalyst will gradually decrease with the process running. The most important quality index for this process is the content of 4-CBA in the product. However, in real plant, the content of 4-CBA is analysed every two hours in a laboratory. It is a very large delay for control system so the operation conditions of the process could not be adjusted in time. These may results in a maximum two hours product failure. In this paper, a first principle model of the process is developed based on Aspen Plus. The accuracy of the model is verified by the model results and the actual plant results. Based on this model, a series of sensitive analysis are performed. Six variables include 4-CBA content in TA, react temperature, react pressure, hydrogen flow rate, catalyst activity and Slurry concentration are the main factors influencing the 4-CBA content in the product. Though the aspen model is accurate, these parameters in aspen model are not easy to adjust quickly. In order to predict 4-CBA content quickly, a soft sensor for 4-CBA is developed using recursive kernel partial least squares considering the nonlinearity and slow time-varying of the process. Results show that the prediction accuracy of this method is very high and it is easy for engineers to handle. Copyright © 2017, AIDIC Servizi S.r.l.

关键词： Chemical reactors

来源：评论

学校读者我要写书评

暂无评论

A new lumped kinetic model of an industrial hydrocracking process

引用

Chemical Engineering Transactions 2017年 61卷 673-678页

作者： Song, Wenjiang Zhong, Weimin Yang, Minglei Du, Wenli Qian, Feng Key Laboratory of Advanced Control and Optimization for Chemical Processes Ministry of Education East China University of Science and Technology Shanghai200237 China

Hydrocracking is a catalytic cracking process for the conversion of heavy oil fractions, such as vacuum gas oil (VGO), into valuable products with lower boiling point, such as diesel, kerosene and gasoline. Due to the flexibility of the process, high yields and good quality of liquid products, hydrocracking has become an important unit in modern refinery. However, the study of kinetic modelling towards hydrocracking reactor (HCR) is limited due to its complicated reaction mechanism. In this study, the reactor model is established based on a new six-lump model considering the velocity change along the reactor, different thermal effects and kinetic differences between hydrotreater (HT) and hydrocracker (HC). Compared with the previously reported lumped kinetic models, the fine-tuned model (calibrated by differential evolution algorithm) can predict products yields more accurately, in particular outlet temperature of each beds and the detailed yields and temperature distribution along with the reactor beds. The proposed lump based kinetic model can be applied to the optimization and control of industrial hydrocracking process. © 2017, AIDIC Servizi S.r.l.

关键词： Kinetic theory

来源：评论

学校读者我要写书评

暂无评论

Smart and Optimal Manufacturing： The key for the Transformation andDevelopment of the Process Industry

引用

Engineering 2017年第2期3卷 151-151页

作者： Feng Qian Key Laboratory of Advanced Control and Optimization for Chemical Processes Ministry of Education East China University of Science and TechnologyShanghai 200237 China

In recent years, smart manufactur-ing has been the focus of competitionand collaboration between countriesaround the world. The major developedand developing countries are speedingup their strategic planning and layoutfor smart manufacturing. Germany, theUnited States, and China have releasedthe Industry 4.0, Smart Process Man-ufacturing, and Made in China 2025initiatives, respectively, which aim ata deep integration of information andcommunication technology and man-ufacturing technology, thus achieving seamless integration of prod-ucts, equipment, humans, and organizations.

关键词：期刊编辑工作人物介绍工程

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：