检索结果-内蒙古大学图书馆

Microscale and mesoscale modeling for compressive failure in unidirectional carbon fiber reinforced polymer composites with random distribution of fiber misalignments

引用

POLYMER COMPOSITES 2024年第6期45卷 5675-5693页

作者： Xie, Jiaming Ning, Zhihua Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou Peoples R China Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

Compressive strength and failure mode of carbon fiber reinforced polymer (CFRP) composites are affected by the severity of fiber misalignment. In this paper, numerical models based on computational micromechanics are proposed to investigate the correlation between fiber misalignment and compression failure. A single-fiber micromodel including fiber, matrix, and interface phases is first developed to capture the influence of misalignment severity on the material failure mode. The failure longitudinal stress distribution in the fiber predicted by the micromodel indicates that the failure mode depending on the initial misalignment can be identified as uniform compression failure, compression-bending combination collapse, and fiber buckle. A mesoscale 2D model with multiple fibers is then constructed to investigate the kink band formation. This model takes into account the distribution of fiber misalignments to capture the key geometric features of fiber misalignment that influent the compression failure in realistic composite materials at the structural scale. The results show that fiber misalignment angle amplitude, misalignment dispersion (characterized by the standard deviation), and misalignment wavelength are the key parameters of fiber misalignment, which have significant effects on compression strength and kink band *** Single-fiber model to capture the effect of misalignment severity on failure mode. Multi-fiber model with randomly distributed fiber misalignments. Failure mode depending on the severity of initial misalignment was identified. key parameters of misalignment on compression strength and kink band geometry. Microscale model with a single fiber and mesoscale model with random distribution of fiber misalignments for prediction of compression failure. image

关键词： fiber misalignment kinking failure multiscale modeling random distribution

来源：评论

学校读者我要写书评

暂无评论

A novel semi-convex function for simultaneous identification of moving vehicle loads and bridge damage

引用

MECHANICAL SYSTEMS AND SIGNAL PROCESSING 2025年 223卷

作者： Hou, Zhilong Liang, Yi Yu, Ling Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

For the simultaneous identification (SI) problem on the moving vehicle loads and bridge damage, the existing methods fail to appropriately consider the sparse characteristics of structural damage and ignore the prior information of vehicle loads, which make them suffering from challenges such as prolonged computation cost, poor noise robustness, and limited identification accuracy. To address this issue, a novel semi-convex function is proposed to construct a theoretical framework for the SI problem using the bridge dynamic responses subjected to moving vehicles in this study. Firstly, the bridge damage-induced virtual forces are conceptualized as a new form of moving residual forces characterized by block sparsity properties, and the damage location is then determined by the frequency characteristics with the largest fundamental frequency amplitude of moving residual forces. Secondly, a semi-convex function model encompassing moving forces and moving residual forces is defined. Combined with sparse regularization strategy, an improved alternating direction method of multipliers algorithm is proposed and applied to simultaneously solve for both moving vehicle loads and damage degrees. To assess the effectiveness and feasibility of the proposed method, extensive numerical validations are conducted in various bridge damage scenarios. Additionally, a series of truss bridge experiments are performed in laboratory under multiple damage and vehicle axle-weight conditions. The results show that compared with the existing outstanding methods, the proposed semi-convex function method can significantly reduce the identification cost, enhance robustness to noise, and demonstrate notable improvements in accuracy for the SI problem, which provides an innovative and more efficient solution to the SI problem in bridge engineering.

关键词： Bridge structural health monitoring Semi-convex function Moving vehicle loads Bridge damage Sparse regularization

来源：评论

学校读者我要写书评

暂无评论

Accurate identification of moving vehicle loads on beam-like bridge structures integrating novel PCA-based dictionary with grouping and weighting strategy

引用

engineering STRUCTURES 2025年 322卷

作者： Xu, Bohao Hou, Zhilong Chen, Yuhan Yu, Ling Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

Most moving load identification (MLI) methods incorporate the dictionary theory as a regularization technique to address the ill-posedness of the problem. However, the selection of atoms in the dictionary often inadequately represents the actual vehicle loads in existing methods, and the prior information from these atoms is disregarded in the subsequent MLI computations. Therefore, a novel MLI framework is proposed for beam-like bridge structures based on a novel dictionary derived from principal component analysis (PCA) and newly grouping and weighting strategy in this study. At first, a vehicle-bridge coupling system (VBCS) is established to obtain the interaction forces between the moving vehicles and bridge deck. The system matrices between the interaction forces and structural responses are derived in the time domain. The PCA technique is then employed to extract information from these interaction forces and to subsequently construct a PCA-based dictionary. Based on the eigenvalues of each principal component in the dictionary, a weighted group sparse model, incorporating the newly grouping and weighting strategy, is defined to obtain the coefficients of each atom. The solution to this model is obtained using the alternating direction method (ADM). Finally, the proposed method is validated in numerical simulations comparing with some existing methods. The effects of noise levels, road surface roughness, number of training data, response combinations and the tolerances in ADM were also studied. Similarity law for the VBCS is conducted in experimental verifications to construct the PCA-based dictionary, allowing for a reasonable identification of gross vehicle weights. The results indicate that the MLI accuracy has been enhanced by the proposed method, and the similarity law employed in experiments is reasonable. Settingthe tolerance in ADM as epsilon = 1 x 10-5 can lead to a higher accuracy and reduce the computation cost in both numerical simulations and exper

关键词： Vehicle-bridge interaction Moving load identification (MLI) Principal component analysis (PCA) Group Lasso Alternating direction method (ADM)

来源：评论

学校读者我要写书评

暂无评论

Optimal implicit single-step time integration methods with equivalence to the second-order-type linear multistep methods for structural dynamics: Accuracy analysis based on an analytical framework

引用

COMPUTER METHODS IN APPLIED MECHANICS AND engineering 2024年第PartA期418卷

作者： Zhang, Jie Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

This paper presents a comprehensive study of the second-order-type time integration methods family encompassing the linear multistep (LMS) methods, the single-step methods, and the LMS equivalent single-step methods for structural dynamics. An analytical accuracy framework for algorithm design, convergence, and optimization is developed, where the obstacles encountered in algorithms construction, convergence accuracy, algorithms equivalence, accuracy measurement, and accuracy optimization in traditional accuracy frameworks are well addressed. Rigorous accuracy analysis successively to the second-order-type LMS (LMS2) methods, the single-step methods, and the LMS2 equivalent single-step methods aims to reveal optimal algorithms with desirable numerical properties. First, independent implicit algorithms including the velocity type and the acceleration type LMS2 methods except the displacement type ones are newly revealed in the LMS2 methods family with second-order convergence and A-stability, and three error constants that can play essential roles in the accuracy measurement and algorithm optimization are developed. Second, a single-step methods family where the displacement, velocity, and acceleration can achieve the same order of accuracy simultaneously is revealed in a generalized 16 -parameters methods family, which contains numerous conventional single-step single-solve methods as subfamily methods. It is found that the unit consistent and non-consistent represen-tations show a significant difference in the local truncation error, stability, and convergence performances. Third, a family of accuracy-improved single-step methods with algorithmic equivalence, which is stricter than the traditional spectral equivalence, to the LMS2 methods is revealed. It is clarified that the difference between the methods with equivalence can significantly influence their convergence accuracy, and the error constants concept of the LMS2 methods can be extended to the single-step m

关键词： Accuracy analysis Algorithm optimization controllable numerical dissipation Stability Time integration Structural dynamics

来源：评论

学校读者我要写书评

暂无评论

Double l1 regularization for moving force identification using response spectrum-based weighted dictionary

引用

STRUCTURAL engineering AND MECHANICS 2024年第2期91卷 227-238页

作者： Lei, Yuandong Xu, Bohao Yu, Ling Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

Sparse regularization methods have proven effective in addressing the ill-posed equations encountered in moving force identification (MFI). However, the complexity of vehicle loads is often ignored in existing studies aiming at enhancing MFI accuracy. To tackle this issue, a double l(1) regularization method is proposed for MFI based on a response spectrum-based weighted dictionary in this study. Firstly, the relationship between vehicle-induced responses and moving vehicle loads (MVL) is established. The structural responses are then expanded in the frequency domain to obtain the prior knowledge related to MVL and to further construct a response spectrum-based weighted dictionary for MFI with a higher accuracy. Secondly, with the utilization of this weighted dictionary, a double l(1) regularization framework is presented for identifying the static and dynamic components of MVL by the alternating direction method of multipliers (ADMM) method successively. To assess the performance of the proposed method, two different types of MVL, such as composed of trigonometric functions and driven from a 1/4 bridge-vehicle model, are adopted to conduct numerical simulations. Furthermore, a series of MFI experimental verifications are carried out in laboratory. The results shows that the proposed method's higher accuracy and strong robustness to noises compared with other traditional regularization methods.

关键词： inverse analysis moving force identification response spectrum sparse regularization vehicle-bridge interaction weighted dictionary

来源：评论

学校读者我要写书评

暂无评论

Exact simulation for direction-dependent large elastic strain responses of soft fibre-reinforced composites

引用

Applied Mathematics and Mechanics(English Edition) 2023年第9期44卷 1497-1510页

作者： Huifeng XI Guicheng ZHAO OBRUHNS Siyu WANG Heng XIAO School of Mechanics and Construction Engineering MOE Key Lab of Disaster Forecast and Control in EngineeringJinan UniversityGuangzhou 510632China Institute of Mechanics Ruhr-University BochumBochum D-44780Germany

An explicit form of the elastic strain-energy function for direction-dependent large elastic strain behaviors of soft fiber-reinforced composites is first presented based upon a decoupled approach for simulating complex nonlinear coupling *** this form,the exact closed-form solutions are then obtained for the uniaxial tension responses in the fiber and cross-fiber *** such exact solutions,the issue of simultaneously simulating strongly coupling nonlinear responses in the fiber and cross-fiber directions may be reduced to the issue of separately treating each decoupled uniaxial stress-strain response,thus bypassing usual complexities and uncertainties involved in identifying a large number of strongly coupled adjustable *** numerical examples given are in good agreement with the experimental data for large strain responses.

关键词： soft solid fiber-reinforced composite large elastic strain transverse isotropy strain-energy function logarithmic strain decoupling approach

来源：评论

学校读者我要写书评

暂无评论

A Review on the Mullins Effect in Tough Elastomers and Gels

引用

Acta Mechanica Solida Sinica 2024年第2期37卷 181-214页

作者： Lin Zhan Shaoxing Qu Rui Xiao MOE Key Lab of Disaster Forecast and Control in Engineering College of Mechanics and Construction EngineeringJinan UniversityGuangzhou510632China State Key Laboratory of Fluid Power and Mechatronic System Key Laboratory of Soft Machines and Smart Devices of Zhejiang ProvinceDepartment of Engineering MechanicsZhejiang UniversityHangzhou310027China

Tough elastomers and gels have garnered broad research interest due to their wide-ranging potential ***,during the loading and unloading cycles,a clear stress softening behavior can be observed in many material systems,which is also named as the Mullins *** this work,we aim to provide a complete review of the Mullins effect in soft yet tough materials,specifically focusing on nanocomposite gels,double-network hydrogels,and multi-network *** first revisit the experimental observations for these soft *** then discuss the recent developments of constitutive models,emphasizing novel developments in the damage mechanisms or network *** phenomenological models will also be briefly *** attention is then placed on the anisotropic and multiaxial modeling *** is demonstrated that most of the existing models fail to accurately predict the multiaxial data,posing a significant challenge for developing future anisotropic models tailored for tough gels and elastomers.

关键词： Mullins effect Double-network hydrogels Nanocomposite gels Multi-network elastomers Anisotropic damage model Multiaxial model

来源：评论

学校读者我要写书评

暂无评论

A theoretical model for impact protection of flexible polymer material

引用

Theoretical & Applied Mechanics Letters 2024年第3期14卷 217-226页

作者： Huifeng Xi Hui Pan Song Chen Heng Xiao MOE Key Lab of Disaster Forecast and Control in Engineering School of Machanics and Construction EngineeringJinan UniversityGuangzhou 510632China Doctor Workstation of Xuwen County Guangdong Hydropower Energy Co. Ltd.Xuwen 524100China

The relationship between the protective performance of flexible polymer material and material parameters(elasticmodulus,viscosity coefficient)is explored,an impact collision motion equation between two bodies is establishedfrom the viscoelastic material constitutive,and the relationship between the kinematic response and the materialparameters is *** on the Kelvin constitutive model,a theoretical model for impact between the pro-tective body and the protected body is established,then the dynamic response is *** feasibility of themodel was verified by drop hammer experiment,and the material parameters(elastic modulus,viscosity coeffi-cient)were obtained by *** model is discretized and the relationship between local impact response andmaterial parameters is *** discussion results on the relationship between the impact response and theprotective material performance indicate that adjusting the elastic modulus,viscosity coefficient,and thicknessof the protective material can effectively improve protective effect.

关键词： Flexible polymer material Viscoelastic material Kelvin modelDynamic response Elastic modulus and viscosity coefficient

来源：评论

学校读者我要写书评

暂无评论

Multi-objective optimization of a bistable curved shell with controllablethickness based on machine learning

引用

Theoretical & Applied Mechanics Letters 2024年第6期14卷 467-476页

作者： Shiqing Huang Chenjie Zhao Xiaoqian Ning Wenhua Zhang Huifeng Xi Zhiwei Wang Changxian Wang School of Mechanics and Construction Engineering Jinan UniversityGuangzhou 510632China College of Packaging Engineering Jinan UniversityZhuhai 519070China MOE key Lab of Disaster Forecast and Control in Engineering Jinan UniversityGuangzhou 510632China Academy of Military Sciences Beijing 100091China

Bistable curved shells have become a promising low-cost application in energy absorption fields owing to recentadvances in material and *** research has been conducted to improve their energy absorptioneffect through forward prediction and single-objective ***,these approaches may not fully explore their functional *** this study,we propose a multi-objective optimization framework based on theprinciple of main objective optimization that combines neural networks and genetic *** energy absorption effect and backward snapping force of the bistable curved shell are improved ***,a reverse design algorithm is developed to generate the preset load-displacement curve,which further expandsthe application of machine learning methods in the field of multi-objective *** combination ofmachine learning and multi-objective optimization is highly effective for building meta-structures with specificperformance requirements and has potential applications in solving complex optimization tasks in various fields.

关键词： Bistable curved shell Structure optimization Machine learning Multi-objective optimization Reverse design

来源：评论

学校读者我要写书评

暂无评论

Cushioning Performance of a Novel Polyurethane Foam Material Applied in Fragile Packaging

引用

Acta Mechanica Solida Sinica 2024年第3期37卷 487-497页

作者： Huifeng Xi Chunqiu Guo Jinbiao Yang Xiaogang Wang Bowei Wang Shiqing Huang Zhiwei Wang School of Mechanics and Construction Engineering Jinan UniversityGuangzhou510632China College of Packing Engineering Jinan UniversityZhuhai519070China MOE Key Lab of Disaster Forecast and Control in Engineering Jinan UniversityGuangzhou510632China Foshan Soft Valley Technology Co. Ltd.Foshan528000China

For fragile products,packaging requires cushioning protection to prevent irreversible damage from accidental falls,transportation impacts,and other *** new polyurethane foam(PUF)material demonstrates superior cushioning and vibration isolation performance in practical applications,effectively minimizing damage from *** and vibration experiments were conducted on packages comprising novel PUF,expandable polyethylene,ethylene-vinyl acetate copolymer foam,and *** verify that the new PUF material outperforms in cushioning and vibration isolation,as observed from the acceleration ***,a random vibration analysis of a packaging unit involving different thicknesses of PUF materials and bracelets reveals the enhanced vibration isolation effect within a specific thickness *** vibration results of the bracelet’s outer packaging align closely with finite element simulation results,validating the effectiveness of designing and optimizing the outer *** finite element simulation,deeper understanding and prediction of the bracelet’s vibration response under various conditions is achieved,facilitating optimized packaging design for better protection and vibration damping.

关键词： Flexible polyurethane foam Packaging of fragile goods Nonlinear dynamics Vibration frequency Finite element simulation

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：