检索结果-内蒙古大学图书馆

A novel WOA-based structural damage identification using weighted modal data and flexibility assurance criterion

STRUCTURAL engineering AND MECHANICS 2020年第4期75卷 445-454页

作者： Chen, Zexiang Yu, Ling Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

Structural damage identification (SDI) is a crucial step in structural health monitoring. However, some of the existing SDI methods cannot provide enough identification accuracy and efficiency in practice. A novel whale optimization algorithm (WOA) based method is proposed for SDI by weighting modal data and flexibility assurance criterion in this study. At first, the SDI problem is mathematically converted into a constrained optimization problem. Unlike traditional objective function defined using frequencies and mode shapes, a new objective function on the SDI problem is formulated by weighting both modal data and flexibility assurance criterion. Then, the WOA method, due to its good performance of fast convergence and global searching ability, is adopted to provide an accurate solution to the SDI problem, different predator mechanisms are formulated and their probability thresholds are selected. Finally, the performance of the proposed method is assessed by numerical simulations on a simply-supported beam and a 31-bar truss structures. For the given multiple structural damage conditions under environmental noises, the WOA-based SDI method can effectively locate structural damages and accurately estimate severities of damages. Compared with other optimization methods, such as particle swarm optimization and dragonfly algorithm, the proposed WOA-based method outperforms in accuracy and efficiency, which can provide a more effective and potential tool for the SDI problem.

关键词： structural damage identification whale optimization algorithm constrained optimization problem objective function flexibility assurance criterion

来源：评论

学校读者我要写书评

暂无评论

Alternating iterative method for moving force identification 10

Alternating iterative method for moving force identification

引用

10th International Conference on Bridge Maintenance, Safety and Management (IABMAS)

作者： Liu, H. L. Li, C. Yu, L. Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou Peoples R China State Key Lab Hlth & Safety Bridge Struct Wuhan Peoples R China

ISBN: (纸本)9780429279119;9780367232788

Moving force identification (MFI) has attracted increasing attentions in recent years. However, the MFI results obtained from the existing methods are inaccurate under measurement noises. One of reasons is fact that the characteristics of moving forces are not properly explored. To fix the problem, a novel MFI method is proposed by combining an alternating iterative method (AIM) and regularizations here. Firstly, each of moving forces is decomposed into constant force and time varying force components respectively. The prior knowledge that time-varying force component usually fluctuates around constant force component is then adopted. Rather than convex optimization problem, a semi-convex constrained estimation problem is defined and solved by the AIM. Numerical simulations on MFI in a simply supported beam are conducted to assess its effectiveness. The results show that the proposed method can provide a higher MFI accuracy than the truncated generalized singular value decomposition method and the prior knowledge is reasonable.

关键词： Iterative methods

来源：评论

学校读者我要写书评

暂无评论

Propagation Characteristics of Flexural Wave in One-Dimensional Phononic Crystals Based on Lattice Dynamics Model

引用

Journal of Applied Mathematics and Physics 2022年第5期10卷 1416-1431页

作者： Hao Wu Youdi Kuang School of Mechanics and Construction Engineering MOE Key Laboratory of Disaster Forecast and Control in Engineering Jinan University Guangzhou China School of Civil Engineering and Architecture Wuyi University Jiangmen China

In this paper, we establish discrete flexural lattice chain models of Bragg and locally resonant phononic crystals by setting mass defect atoms and local resonant elements on the flexural lattice chain. The bandgap characteristics of flexural wave in phononic crystals are studied by establishing the governing equations of the model. The results from models show that with the change of the mass ratio of defective atoms to normal atoms, the bandgap of the flexural wave produced by Bragg scattering shows a certain rule. When the local resonant bandgap and Bragg scattering bandgap are close to each other, the two bandgaps will be coupled to form a wider flexural wave bandgap. The effect of axial strain on bending wave propagation is only the shift of bandgap position. The effect of material damping on the propagation of a bending wave is only energy dissipation at high frequency. In addition, we use finite element simulation to calculate the bandgap of flexural wave in phononic crystals with mass defects, and the results are consistent with lattice chain model. This shows that lattice chain model can effectively guide the bandgap design of phononic crystals. This comprehensive study may help to elucidate the rule of bandgap generation of flexural wave in one-dimensional phononic crystals.

关键词： Phononic Crystals Local Resonance Bragg Scattering Damping Strain Flexural Wave

来源：评论

学校读者我要写书评

暂无评论

Study on Band Gap Characteristics of Boat-Shaped Phononic Crystal

引用

Journal of Applied Mathematics and Physics 2022年第12期10卷 3693-3699页

作者： Jia Xu Yabing Li Youdi Kuang School of Mechanics and Construction Engineering MOE Key Laboratory of Disaster Forecast and Control in Engineering Jinan University Guangzhou China School of Civil Engineering and Architecture Wuyi University Jiangmen China

In this paper, we analyze the two-dimensional Boat-shaped structure based on the finite element method. We calculated its energy band structure and vibration transmission properties and found that the structure has band gaps at both high and low frequencies. Compared with common traditional two- dimensional phononic crystals, the boat-shaped phononic crystal has the advantage of larger bandgap design and modulation parameter space due to their structural complexity. In order to obtain better bandgap characteristics, we studied the influence of four key parameters, such as the rod length and the angle between the rods, on the bandgap. The results show that: for low frequency band gaps, the width of the band gap can be effectively changed by changing the size of the angle between the rods while rod length greatly affects the bandgap position;for high band gaps, the length of rods has a large effect on the band gap position. These laws have guiding significance for the bandgap regulation of boat-shaped phononic crystal.

关键词： Phononic Crystal Band Gap Boat-Shaped Finite Element Simulation

来源：评论

学校读者我要写书评

暂无评论

Effect of filter material and porosity on the energy storage capacity characteristics of diesel particulate filter thermoelectric conversion mobile energy storage system

引用

ENERGY 2023年 283卷

作者： Zhao, Xiaohuan Jiang, Jiang Mao, Zhengsong Jinan Univ Int Energy Coll Energy & Elect Res Ctr Zhuhai Campus Zhuhai 519070 Peoples R China Yuchai Synland Technol Co Ltd Nanning 530007 Peoples R China Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China Jinan Univ Minist Educ China Sch Mech & Construct Engn Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

The thermal energy generated by the diesel particulate filter (DPF) is converted into electrical energy through the thermoelectric generator (TEG) and stored in a mobile battery power energy storage (MBPE) system. The filter material and porosity directly affect the regeneration temperature of the DPF, which in turn affects the thermoelectric conversion capability of the thermoelectric module (TEM). This study explores the energy storage capacity characteristics for the DPF-TEG of the MBPES system at a regeneration temperature of 923 K. The filter materials considered are cordierite, mullite and SiC with porosities of 0.4, 0.45, 0.5, 0.55, 0.6, 0.65 and 0.7. The maximum output power and thermoelectric conversion efficiency are analyzed. The thermal input power for the SiC filter is approximately 2.4 times and 1.8 times than that of the cordierite filter and the mullite filter. As the porosity increases from 0.4 to 0.7, the output current for the DPF-TEG of the MBPES system with the 3 filter materials ranges from 0.66 A to 2.11 A. The output voltage changes from 50.62 V to 161.98 V. The maximum output power varies from 33.36 W to 341.59 W and the conversion efficiency rises from 0.88% to 2.72%.

关键词： Diesel particulate filter DPF Mobile battery power energy storage system Thermoelectric module Filter material Porosity

来源：评论

学校读者我要写书评

暂无评论

Progressive Failure Analysis of Laminates with Embedded Wrinkle Defects Based on an Elastoplastic Damage Model

引用

MATERIALS 2020年第10期13卷 2422页

作者： Ning, Zhi Hua Huo, Guan Liang Liu, Ren Huai Wu, Wei Lin Xie, Jia Ming Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China

Out-of-plane wrinkling has a significant influence on the mechanical performance of composite laminates. Numerical simulations were conducted to investigate the progressive failure behavior of fiber-reinforced composite laminates with out-of-plane wrinkle defects subjected to axial compression. To describe the material degradation, a three-dimensional elastoplastic damage model with four damage modes (i.e., fiber tensile failure, matrix failure, fiber kinking/splitting, and delamination) was developed based on the LaRC05 criterion. To improve the computational efficiency in searching for the fracture angle in the matrix failure analysis, a high-efficiency and robust modified algorithm that combines the golden section search method with an inverse interpolation based on an existing study is proposed. The elastoplastic damage model was implemented in the finite-element code Abaqus using a user-defined material subroutine in Abaqus/Explicit. The model was applied to the progressive failure analysis of IM7/8552 composite laminates with out-of-plane wrinkles subjected to axial compressive loading. The numerical results showed that the compressive strength prediction obtained by the elastoplastic damage model is more accurate than that derived with an elastic damage model. The present model can describe the nonlinearity of the laminate during the damage evolution and determine the correct damage locations, which are in good agreement with experimental observations. Furthermore, it was discovered that the plasticity effects should not be neglected in laminates with low wrinkle levels.

关键词： elastoplastic damage model wrinkle defect progressive failure analysis fiber kinking fracture plane

来源：评论

学校读者我要写书评

暂无评论

Comparative studies on Structural Damage Detection using different kinds of Objective Functions based on Modal Data

Comparative studies on Structural Damage Detection using dif...

引用

International Conference on Intelligent Transportation, Big Data & Smart City (ICITBS)

作者： Zepeng Chen Di Zhao School of Transportation and Civil Engineering & Architecture Foshan University Foshan China MOE Key Lab of Disaster Forecast and Control in Engineering Jinan University Guangzhou China

In order to investigate the ability of different objective functions based on modal data for SDD problems, six objective functions are defined and a comparison study is presented in this paper. To make a fair comparison, a quantified index name damage vector consistency is defined to describe the consistency between the identified damage vector factor and the assume one. Simply-supported beam with 10 finite elements is simulated which provides modal data generation and damage cases simulation. The percentage of DVC equaling to 100% in the all 100 times is also calculated which shows the objective function based on MTMAC is the best one for SDD.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Interfacial Torsional Behavior of Pipe Joints with Hardening and Softening Bond-Slip Law

引用

INTERNATIONAL JOURNAL OF COMPUTATIONAL METHODS 2024年第10期21卷

作者： Yuan, Hong Han, Jun Lu, Huaqiang Mo, Ziyong Zeng, Lan Jinan Univ Sch Mech & Construct Engn MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China Guangzhou Inst Sci & Technol Sch Architectural Engn Guangzhou 510540 Peoples R China

For the purpose of a better understanding of the mechanical behavior of pipe joints' interface which is critical for the integral performance of a pipe system, and excessive torsional loading that is typical for their interfacial failure, the interfacial behavior of adhesive bonded pipe joints under torsion loads is theoretically studied throughout the full-ranged failure process based on a local bond-slip law with hardening and exponential softening. Firstly, closed-form solutions for the interfacial shear stress distribution and load-displacement response are derived to describe the four basic loading stages. Secondly, a simplified law is used by changing the exponential softening law into a tri-linear one to make the comparison. According to the analytical solutions of two laws, the influences of the bond length on load-displacement curve including the ultimate loads and relative slips are discussed, with the similarities and differences between the two laws being studied. Thirdly, by introducing a dimensionless damage parameter, the results of the finite element method (FEM) using ABAQUS modeling are compared with analytical results. Based on these coincident results, the parametric studies of bond lengths and ratios of torsion stiffness on specific cases were conducted to explain the stress transfer mechanism and interface crack propagation. Both their ultimate bearing capacity and ductility improve in an increase of bond lengths, while the ductility reduces as the ratio of torsion stiffness increases. The outcomes of this paper are helpful to improve the safety and applicability of bonded pipe joints in engineering design and application.

关键词： Pipe joint bond-slip load torsion load interfacial behavior

来源：评论

学校读者我要写书评

暂无评论

Prestress Force and General Excitation Identification for Plate-like Concrete Bridges

引用

BUILDINGS 2024年第7期14卷 2032页

作者： Wang, Wensen Xiang, Ziru Wang, Yi Shao, Xuejun Lu, Jieyu Nantong Univ Sch Transportat & Civil Engn Nantong 226019 Peoples R China Jinan Univ MOE Key Lab Disaster Forecast & Control Engn Guangzhou 510632 Peoples R China Nantong Municipal Facil Management Dept Nantong 226006 Peoples R China

Prestress force dominates the carrying capacity of concrete girders, and is vital for bridge health monitoring. Many vibrational-based methods have been proposed to determine prestress using bridge responses induced by known excitations, which means that they can barely use the normal traffic of in-service bridges as excitation to achieve long-term monitoring. Moreover, most studies are based on beam theory, which may not be precise for plate-like bridges. Hence, this paper establishes a motion equation for a prestressed slab via Kirchhoff's plate theory and proposes a two-step procedure to assess the prestress and general excitation simultaneously through only bridge responses. The excitation is determined in the first step via the Load Shape function method and used as input for the prestress identification via state-space formulation in the second step. A numerical study on a prestressed plate subjected to a moving load is conducted. Considering different levels of measurement noise and load speed, the proposed method can determine the prestress and moving load with 7.33% and 10.18% error, respectively. A laboratory test on a prestressed box girder subjected to a fixed cyclic load is performed, the prestress and cyclic load are both determined to have good stability, and the errors are under 11.32%.

关键词： prestress force identification moving force identification state-space formulation

来源：评论

学校读者我要写书评

暂无评论

Quantitative Simulation Study of Metal Additive Manufacturing by Kinetic Monte Carlo

引用

Journal of Applied Mathematics and Physics 2022年第5期10卷 1587-1601页

作者： Kepeng Ouyang Youdi Kuang School of Mechanics and Construction Engineering MOE Key Laboratory of Disaster Forecast and Control in Engineering Jinan Uni-versity Guangzhou China School of Civil Engineering and Architecture Wuyi University Jiangmen China

Metal additive manufacturing (AM) is a disruptive manufacturing technology that takes into account the needs of complex structural forming and high-performance component forming. At present, the understanding of metal additive manufacturing simulation methods is not thorough enough, which restricts the development of metal additive manufacturing. Present work discusses the evolution of KMC method simulation results for simulating metal additive manufacturing at different length ratios and different scanning speeds. The results reveal that as the scanning speed increases, the main grains in the simulation results are transformed from coarse columnar grains to crescent-shaped grains, which are in good agreement with the existing experimental results. Besides, as the ratio of unit physical length to unit simulation length increases, the ratio of unit physical time to unit simulation time gradually decreases.

关键词： Additive Manufacturing Kinetic Monte Carlo Simulation Grain Morphology

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：