The research of a two stage ultra-broadband power amplifier based on GaN HEMT which operates in the frequency ranging from 3 to 8 GHz, is presented in this paper. The power devices TGF2023-2-02 and TGF2023-2-10 based ...
详细信息
ISBN:
(纸本)9781467370066
The research of a two stage ultra-broadband power amplifier based on GaN HEMT which operates in the frequency ranging from 3 to 8 GHz, is presented in this paper. The power devices TGF2023-2-02 and TGF2023-2-10 based on 0.25um GaN technology are respectively adopted in driver stage and power stage. A frequency compensation and multi-side impedance matching approach are employed in such a way that simultaneously provides appropriate output power and optimal wideband matching. And a fan shaped micro strip line is implemented in the input matching network of the driver stage to achieve broadband impedance transformer. It has been observed that 15-30 W output power with minimum small signal gain of 19.9 dB is demonstrated in the entire band.
In a biomedical signal processing system,ADC is an important circuit that successively converts analog biomedical signals into digital data for next analysis and processing. However, the ADC operates continuously. The...
详细信息
In a biomedical signal processing system,ADC is an important circuit that successively converts analog biomedical signals into digital data for next analysis and processing. However, the ADC operates continuously. The power consumption is a very important factor in ADC circuit design. This brief present a 10 bits and 8 bits reconfigurable SAR ADC with a sampling rate of 20KS/s for implantable *** adopt Single-ended split-array capacitive DAC to reduce Power consumption and area. The digital parts of SAR ADC operate at 0.5V. The analog parts operate at 1 V and 0.6V in 10 bits mode and 8 bits mode,respectively. The power consumptions are 1.354..W and 152.28 nW. DNL are-9m.22 LSB and-0.02~0.21 *** are-0.2~0.58 LSB and-0.25~0.25 LSB. ENOB are 9.1 and 7.7, respectively. The ADC achieves the FOM of 123.37fJ/conversion-step and 36.55fJ/conversion-step,respectively.
The research of a two stage ultra- broadband power amplifier based on GaN HEMT which operates in the frequency ranging from 3 to 8 GHz, is presented in this paper. The power devices TGF2023-2-02 and TGF2023-2-10 based...
详细信息
The research of a two stage ultra- broadband power amplifier based on GaN HEMT which operates in the frequency ranging from 3 to 8 GHz, is presented in this paper. The power devices TGF2023-2-02 and TGF2023-2-10 based on 0.25 um GaN technology are respectively adopted in driver stage and power stage. A frequency compensation and multi-side impedance matching approach are employed in such a way that simultaneously provides appropriate output power and optimal wideband matching. And a fan shaped micro strip line is implemented in the input matching network of the driver stage to achieve broadband impedance transformer. It has been observed that 15-30 W output power with minimum small signal gain of 19.9 dB is demonstrated in the entire band.
The design, fabrication and measurements of an ultra-broadband power amplifier based on GaN HEMT technology which operates in the frequency ranging from 3 GHz to 8 GHz, is presented in this paper.A TGF2023-2-02 GaN HE...
详细信息
The design, fabrication and measurements of an ultra-broadband power amplifier based on GaN HEMT technology which operates in the frequency ranging from 3 GHz to 8 GHz, is presented in this paper.A TGF2023-2-02 GaN HEMT chip from TriQuint is adopted. The amplifier is designed by using a frequency compensation and multi impedance broadband matching approach for both input and output networks. And a sector micro strip line is implemented in the input matching network to achieve the wideband higher gain features. The measured results show that the amplifier module provided more than 11 dB power gain over 3-8GHz. The saturated output power is 37.3 dBm under DC bias of Vds=28 V, Vgs=-2.53 V at the frequency of 5GHz.
The input offset voltage is a quit important performance parameter for operational amplifiers, and the low frequency 1/f noise has a great effect on the offset voltage. In this paper, chopping technology which is an e...
详细信息
The input offset voltage is a quit important performance parameter for operational amplifiers, and the low frequency 1/f noise has a great effect on the offset voltage. In this paper, chopping technology which is an efficient approach to decrease the 1/f noise and offset voltage of CMOS amplifiers is adopted. In the low pass filter, the multiplier composed of R and C is used to filter out the modulation noise. The circuit of the presented chopper amplifier is designed and simulated with 45 nm CMOS process and a 1V supply. Simulated results show that the total harmonic distortion of chopper amplifier is 54.1dB and the chopper frequency is 10 kHz. The input referred noise is 2.54 nV / (Hz)@1kHz, and the average power consumption is 65.5μ*** proposed technology has a pleasurable preference.
For CMOS process infrared receiver *** paper mainly studies the suppression of the infrared receiver noise,and presents a circuit design which can convert photo-generated current to *** the design,infrared receiver ch...
详细信息
For CMOS process infrared receiver *** paper mainly studies the suppression of the infrared receiver noise,and presents a circuit design which can convert photo-generated current to *** the design,infrared receiver chip not only can accurately detect tens of nA to hundreds of μA current,but also can effectively avoid amplifier's saturation distortion when large current *** Cadence simulation tools for functional ***,the results show that when operating voltage is 3 V,the circuit has a well supression for 10 nA to 290μA DC photocurrent and the gain obtained with 46 dB with a good *** noise is 3.41 nV/(HZ) and the power consumption is *** chip can achieve a high sensitivity,strong anti-interference ability of the design *** the photoelectric conversion section,we specially designed DC noise suppression and compensation circuit to filter out most of the DC signal component from the input signal,and further improve the system's sensitivity of the input signal.
In recent time, class-EF power amplifiers are promising for the high power added efficiency(PAE) by turning output matching network(OMN) to control the even and odd harmonics at the drain. High quality factor(Q) of ou...
详细信息
In recent time, class-EF power amplifiers are promising for the high power added efficiency(PAE) by turning output matching network(OMN) to control the even and odd harmonics at the drain. High quality factor(Q) of output matching network in the circuit is *** it is difficult to design a broadband high efficiency power amplifier. A practical method of broadband design by using microstrip radial stub instead of normal open or short stub is proposed in this paper. A compact OMN topological structure is also proposed to reduce the size of circuit. Simulation results show that proposal class-EF GaN HEMT power amplifier has PAE of more than 60% and bandwidth of 850 MHz from 1.7GHz to 2.55 GHz. The output power is from 41.5dBm to 42.5dBm.
The paper presents the design and performance of a V-band radiometer MMIC with 0.1μm GaAs pHEMT technology. The circuit includes a frequency double LO chain and a resistive mixer. The resistive mixer with balance str...
详细信息
ISBN:
(纸本)9781467370066
The paper presents the design and performance of a V-band radiometer MMIC with 0.1μm GaAs pHEMT technology. The circuit includes a frequency double LO chain and a resistive mixer. The resistive mixer with balance structure topology can improve the image-rejection ratio. Compared with other mixers, the sub-harmonic mixer can achieve high isolation. The typical isolation measured between LO to rf is almost 60dB. The measured conversion loss of the mixer is from 13dB to 15dB over rf frequency 50-60GHz. The bandwidth of IF reaches 1 GHz. The circuit also exhibits very good phase difference between I/Q within 90 ± 6°. The completed mixer show 25dB image-rejection ratio (IRR) over the whole band.
Based on SMIC 0.35 μm mixed signal process, a forth-order active-opamp RC low-pass filter used in GSM/WCDMA communication system is presented. The filter meets the bandwidth specifications of the PDC and WCDMA standa...
详细信息
Based on SMIC 0.35 μm mixed signal process, a forth-order active-opamp RC low-pass filter used in GSM/WCDMA communication system is presented. The filter meets the bandwidth specifications of the PDC and WCDMA standards especially the high IIP3, and shares the maximum number of components between the two modes. The total area is 1578 μm × 515 μm. The operational amplifiers with adjustable GBW were used to optimize GSM-mode power consumption. The capacitance matrix was used to tune the cutoff frequency with the consideration of the varieties of the temperature and technology. Also, the capacitances were made partially over-laping to reduce the resistance spread. The measured noise figure is 56 dB and 43 dB in the GSM and WCDMA modes, respectively. In the WCDMA mode, the IIP3 is 34 dBm, and the power dissipation is 17.9 mW;While in the GSM mode, the circuit consumes 11.3 mW. The supply volatge is 3.3 V.
The paper presents the design and performance of a V-band radiometer MMIC with 0.1μm GaAs pHEMT technology. The circuit includes a frequency double LO chain and a resistive mixer. The resistive mixer with balance str...
详细信息
The paper presents the design and performance of a V-band radiometer MMIC with 0.1μm GaAs pHEMT technology. The circuit includes a frequency double LO chain and a resistive mixer. The resistive mixer with balance structure topology can improve the image-rejection ratio. Compared with other mixers.. the sub-harmonic mixer can achieve high isolation. The typical isolation measured between LO to rf is almost 60 dB. The measured conversion loss of the mixer is from 13 dB to 15 dB over rf frequency 50-60 *** bandwidth of IF reaches 1 GHz. The circuit also exhibits very good phase difference between I/Q within 90± 6°.The completed mixer show 25 dB image-rejection ratio(IRR) over the whole band.
暂无评论