检索结果-内蒙古大学图书馆

Broadband source-surrounded cloak for on-chip antenna radiation pattern protection

学校读者我要写书评

暂无评论

arXiv 2025年

作者： Chen, Hanchuan Sun, Fei Liu, Yichao Fei, Hongming Chen, Zhihui Key Lab of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi Province College of Physics and Optoelectronic Engineering Taiyuan University of Technology Taiyuan030024 China

As the frequency range of electromagnetic wave communication continues to expand and the integration of integrated circuits increases, electromagnetic waves emitted by on-chip antennas are prone to scattering from electronic components, which limits further improvements in integration and the protection of radiation patterns. Cloaks can be used to reduce electromagnetic scattering;however, they cannot achieve both broadband and omnidirectional effectiveness simultaneously. Moreover, their operating modes are typically designed for scenarios where the source is located outside the cloak, making it difficult to address this problem. In this work, we propose a dispersionless air-impedance-matched metamaterial over the 2-8 GHz bandwidth that achieves an adjustable effective refractive index ranging from 1.1 to 1.5, with transmittance maintained above 93%. Based on this metamaterial, we introduce a broadband source-surrounded cloak that can guide electromagnetic waves from a broadband source surrounded by the cloak in any propagation direction to bypass obstacles and reproduce the original wavefronts outside the cloak. Thereby protecting the radiation pattern from distortion due to scattering caused by obstacles. Our work demonstrates significant potential for enhancing the integration density of integrated circuits and improving the operational stability of communication systems. Copyright © 2025, The Authors. All rights reserved.

关键词： Directional patterns (antenna)

Modeling, Simulation, and Parameter Design of Actuation Mechanisms Based on New Magnetic control Materials

学校读者我要写书评

暂无评论

Modeling, Simulation, and Parameter Design of Actuation Mech...

system Simulation Technology and its Application (CCSSTA), IEEE China Conference on

作者： Ruixuan Shen He Tian Guanqiao Zhao Ziliang Zhu Jiangping Li Chao Liang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology National Demonstration Center for Experimental Mechanical and Electrical Engineering Education (Tianjin University of Technology) Tianjin China Tianjin Sanyuan Power Equipment Manufacturing Co. Ltd Tianjin China

ISBN: (数字)9798350366600

ISBN: (纸本)9798350366617

With the rapid advancement of technology, the reliability and efficiency of power systems have become increasingly critical. In power systems, pole-mounted circuit breakers play a vital role. This paper presents a design scheme for an actuation mechanism of a pole-mounted circuit breaker based on new magnetic control materials. By analyzing the working principle of this actuation mechanism, a mathematical model was constructed, and a corresponding virtual prototype model was established using multi-body dynamics simulation software ADAMS and the dynamics mathematical model of this type of actuation mechanism. key performance parameters of the circuit breaker were optimized using a quantum genetic algorithm. Simulation experiments verified that the proposed parameter settings achieved a closing time of 7.6 ms, demonstrating significant improvements in circuit breaker performance. The results of this study are of great importance for the optimization design and performance enhancement of circuit breakers in power systems.

关键词： Vacuum systems Circuit breakers Power system dynamics Mathematical models Software systems simulation Integrated circuit modeling Magnetic circuits Optimization Genetic algorithms

Exploring the Reform of Mechanical Drawing Teaching and Undergraduate Training Based on the “Integration of Competition-Oriented Education and Industry-University Collaboration”

学校读者我要写书评

暂无评论

Exploring the Reform of Mechanical Drawing Teaching and Unde...

International Conference on Educational and Information Technology (ICEIT)

作者： Zhang Runfeng Ming Yankun Liu Zhenzhong Wu Jianguo Wang Xiaofei Sun Yanfang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin Hanhailanfan Marine Technology Co. Ltd. Tianjin China

ISBN: (数字)9798350372663

ISBN: (纸本)9798350372670

This study aims to explore the reform of mechanical drawing teaching and the undergraduate training model with the goal of cultivating high-quality mechanical engineering undergraduate students. Grounded in the concepts of “synergy between science and education” and “integration of competition-oriented education and industry-university collaboration,” this research places talent cultivation as the central focus, linking it with discipline construction and emphasizing scientific research. The study promotes the reform of a collaborative education mechanism known as “integration of competition-oriented education and industry-university collaboration,” effectively establishing a multi-level and multi-dimensional undergraduate training model for mechanical engineering students that incorporates the “dual mentor system” and integrates theory, practice, and application. To apply this model in teaching practice, this research has undertaken the reform of traditional engineering drawing education, specifically addressing the issue of the gap between theory and practice in conventional teaching approaches. The proposed training program not only facilitates the development of innovative mechanical engineering professionals but also offers insights for the reform of undergraduate teaching models in the context of constructing “new engineering disciplines”.

关键词： Training Couplings Technological innovation Engineering drawings Collaboration Mechanical engineering Machinery

Analysis of Strengthening Mechanism and Thermal Stability of M23c6 and Laves Phase in a Ferrite Matrix

学校读者我要写书评

暂无评论

SSRN

SSRN 2023年

作者： Jin, Tiejian Shen, Junjie Ruan, Taotao Zhang, Dechang Xu, Yu Ren, He Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

The strengthening of ferrite matrix steel depends on the strengthening mechanism and thermal stability of M23C6 and Laves phases. This study investigated M23C6(Fe,Cr)23C6 and Laves(Fe2Nb) phase-strengthened ferritic steels. The creep microstructure, the interface structure, and the nanoindentation creep behavior of the second phase were studied. Results showed that the dislocation density in (Fe,Cr)23C6 strengthened ferritic steel after creep is lower than Fe2Nb strengthened ferritic steel. The dislocations in the crept (Fe,Cr)23C6 strengthened ferritic steel are straight without accumulation, significantly bending. The dislocations bend and entangle, forming dislocation walls in the crept Fe2Nb-strengthened ferritic steel. The orientation relationships between (Fe,Cr)23C6/Fe2Nb and ferrite matrix are [001]α-Fe//[011](Fe,Cr)23C6, (020)α-Fe//(71[[EQUATION]])(***)23C6,[001]α-Fe//[5[[EQUATION]]]Fe2Nb,(01[[EQUATION]])α-Fe//(03[[EQUATION]])Fe2Nb. The atomic interface mismatch between M23C6/Fe2Nb and the ferrite matrix is 20% of the semi-coherent interface and 1.6% of the coherent interface. The thermal stability of Fe2Nb is better than (Fe,Cr)23C6. The creep stress exponents of (Fe,Cr)23C6 and Fe2Nb in the ferrite matrix are 4.4 and 12.2, respectively. The alloy’s creep deformation follows dislocation climbing over the second phase. Second-phase Fe2Nb strengthening played a more significant role than (Fe,Cr)23C6 in enhancing the ferrite matrix. The results provide a theoretical foundation for developing ferritic heat-resistant steel based on Laves (Fe2Nb) phase strengthening. © 2023, The Authors. All rights reserved.

关键词： Creep

Numerical Investigation into the Transient Behavior of the Spike-Type Rotating Stall for a Transonic Compressor Rotor

学校读者我要写书评

暂无评论

Fluid Dynamics & Materials Processing 2022年第3期18卷 761-773页

作者： Pengfei Ju Fangfei Ning Zhiting Tong Jingying Wang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education(Tianjin University of Technology) Tianjin300384China Research Institute of Aero-Engine Beihang UniversityBeijing100191China National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics School of Energy and Power EngineeringBeihang UniversityBeijing100191China School of Energy and Power Engineering Shandong UniversityJinan250061China Shandong Engineering Laboratory for High-Efficiency Energy Conservation and Energy Storage Technology&Equipment Shandong UniversityJinan250061China

In this paper,a numerical investigation into a spike-type rotating stall process is carried out considering a transonic compressor rotor(the NASA Rotor 37).Through solution of the Unsteady Reynolds-Averaged Navier-Stokes(URANS)equations,the evolution process from an initially circumferentially-symmetric near-stall flow field to a stable stall condition is simulated without adding any artificial *** the near-stall operating point,periodic fluctuations are present in the overall flow of the ***,the blockage region in the channel periodically shifts from middle span to the *** fluctuating condition does not directly lead to stall,while the full-annulus calculation eventually evolves to ***,a kind of“early disturbance”feature appears in the dynamic signals,which propagates forward ahead of the rotor.

关键词： Transonic compressor spike stall numerical simulation early disturbance dynamic signal

Pseudo-LiDAR for Visual Odometry

学校读者我要写书评

暂无评论

arXiv 2022年

作者： Deng, Huiying Wang, Guangming Feng, Zhiheng Jiang, Chaokang Wu, Xinrui Miao, Yanzi Wang, Hesheng Advanced Robotics Research Center AI Research Institute School of Information and Control Engineering China University of Mining and Technology Xuzhou221116 China Department of Automation Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China

As one of the important tasks in the field of robotics and machine vision, LiDAR/visual odometry provides tremendous help for various applications such as navigation, location, etc. In the existing methods, LiDAR odometry shows superior performance, but visual odometry is still widely used for its price advantage. Conventionally, the task of visual odometry mainly rely on the input of continuous images. However, it is very complicated for the odometry network to learn the epipolar geometry information provided by the images. In this paper, the concept of pseudo-LiDAR is introduced into the odometry to solve this problem. The pseudo-LiDAR point cloud back-projects the depth map generated by the image into the 3D point cloud, which changes the way of image representation. Compared with the stereo images, the pseudo-LiDAR point cloud generated by the stereo matching network can get the explicit 3D coordinates. Since the 6 Degrees of Freedom (DoF) pose transformation occurs in 3D space, the 3D structure information provided by the pseudo-LiDAR point cloud is more direct than the image. Compared with sparse LiDAR, the pseudo-LiDAR has a denser point cloud. In order to make full use of the rich point cloud information provided by the pseudo-LiDAR, a projection-aware dense odometry pipeline is adopted. Most previous LiDAR-based algorithms sampled 8192 points from the point cloud as input to the odometry network. The projection-aware dense odometry pipeline takes all the pseudo-LiDAR point clouds generated from the images except for the error points as the input to the network. While making full use of the 3D geometric information in the images, the semantic information in the images is also used in the odometry task. The fusion of 2D-3D is achieved in an image-only based odometry. Experiments on the KITTI dataset prove the effectiveness of our method. To the best of our knowledge, this is the first visual odometry method using pseudo-LiDAR. Copyright © 2022, The Authors. A

关键词： Pipelines

On-chip ultra-compact hexagonal boron nitride topological ring-resonator in visible region

学校读者我要写书评

暂无评论

arXiv 2022年

作者： Wu, Min Yang, Yibiao Fei, Hongming Lin, Han Zhao, Xiaodan Kang, Lijuan College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan030024 China Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China Centre for Translational Atomaterials Faculty of Science Engineering and Technology Swinburne University of Technology HawthornVIC3122 Australia

Ultra-compact topological ring-resonators with chirality are important devices for quantum optics. However, there are limited demonstrations of chiral resonators, especially in the visible region. We proposed a topological photonic ring-resonator based on hexagonal boron nitride (hBN) valley photonic crystal (VPC). The spin-valley locking effect in VPC allows achieving robust unidirectional transmission of edge states in the visible region (600 nm-650 nm). As a result, a high quality factor (679.3) with a free spectral range of 15.2 nm in the visible region can be achieved in a hBN all-pass filter with a compact size (2.1 μm∗1.8 μm). In addition, we investigated the transmission properties of hBN ring-resonators with different shapes and combinations, confirming the flexibility of designing topological ring-resonators based on this principle. This design can be readily integrated with quantum photonic chips for broad applications. Copyright © 2022, The Authors. All rights reserved.

关键词： Photonic crystals

High-performance chiral all-optical logic gate based on topological edge states of valley photonic crystal

学校读者我要写书评

暂无评论

arXiv 2022年

作者： Wang, Xiaorong Fei, Hongming Lin, Han Wu, Min Kang, Lijuan Zhang, Mingda Liu, Xin Yang, Yibiao Xiao, Liantuan College of Physics Taiyuan University of Technology Taiyuan030024 China Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China School of Science RMIT University MelbourneVIC3000 Australia Swinburne University of Technology HawthornVIC3122 Australia

For all-optical communication and information processing, it is necessary to develop all-optical logic gates based on photonic structures that can directly perform logic operations. All-optical logic gates have been demonstrated based on conventional waveguides and interferometry, as well as photonic crystal structures. Nonetheless, any defects in those structures will introduce high scattering loss, which compromises the fidelity and contrast ratio of the information process. Based on the spin-valley locking effect that can achieve defect-immune unidirectional transmission of topological edge states in valley photonic crystals (VPCs), we propose a high-performance all-optical logic OR gate based on a VPC structure. By tuning the working bandwidth of the two input channels, we prevent interference between the two channels to achieve a stable and high-fidelity output. The transmittance of both channels is higher than 0.8, and a high contrast ratio of 28.8 dB is achieved. Moreover, the chirality of the logic gate originated from the spin-valley locking effect allows using different circularly polarized light as inputs, representing "1" or "0", which is highly desired in quantum computing. The device's footprint is 18 × 12 μm 2, allowing high-density on-chip integration. In addition, this design can be experimentally fabricated using current nanofabrication techniques and will have potential applications in optical communication, information processing, and quantum computing. Copyright © 2022, The Authors. All rights reserved.

关键词： Logic gates

Study on Sensitization Mechanism of Novel Magnetorheological Composite Pdms Thin Film Based on Enhanced Magneto-Mechanical Effect

学校读者我要写书评

暂无评论

SSRN

SSRN 2023年

作者： Sang, Shengbo Tan, Qiuyun Jiang, Jiaolin Wu, Kaile Xiao, Pengli Zhao, Dong Guo, Xing Yang, Zhuoqing Dong, Xiushan Ge, Yang Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception College of Information and Computer Taiyuan University of Technology Taiyuan030024 China Key Lab of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China Shanghai200240 China Shanxi Academy of Medical Sciences China Shanxi Research Institute of 6D Artificial Intelligence Biomedical Science Taiyuan030024 China

High sensitivity is key to expand the range of bio-detection, especially in realizing biological detection on single molecular level. Herein, we introduce a novel magnetorheological membrane with enhanced magneto-mechanical effect into the biosensor. Specifically, we made the magnetorheological composite PDMS film (MREF) strengthened by magnetostrictive particles (MSP), and the anisotropic TbDyFe-PDMS can be magnetically deformed to 90 °with 5.8 emu/g, which possesses an initial tensile modulus 55% higher than isotropic. In particular, the modified MR effect equations were proposed considering magnetic dipole interaction and nonlinear magnetostrictive pre-strain of MSP. Such formulae indicate that the enhanced MR effect of MSP-MREF is greatly determined by Ms, remanence, and the flux linkage-like structure. In addition, finite element simulations were carried out to validate and complementarily demonstrate the nonlinear magneto-mechanical behaviors of MSP-MREF theoretically. Finally, the biosensor based on MSP-MREF was fabricated to detect the low concentrations of human serum albumin (HSA), and its sensitivity is around 4 times that of the conventional biosensor. Furthermore, it exhibits high reliability in detecting HSA in real human urine samples, making it the ideal candidate as a practical and effective way for the detection of biomolecules at low concentrations in the future. © 2023, The Authors. All rights reserved.

关键词： Finite element method