检索结果-内蒙古大学图书馆

SSRN 2023年

作者： Jin, Tiejian Shen, Junjie Ruan, Taotao Zhang, Dechang Xu, Yu Ren, He Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology Tianjin300384 China

The strengthening of ferrite matrix steel depends on the strengthening mechanism and thermal stability of M23C6 and Laves phases. This study investigated M23C6(Fe,Cr)23C6 and Laves(Fe2Nb) phase-strengthened ferritic steels. The creep microstructure, the interface structure, and the nanoindentation creep behavior of the second phase were studied. Results showed that the dislocation density in (Fe,Cr)23C6 strengthened ferritic steel after creep is lower than Fe2Nb strengthened ferritic steel. The dislocations in the crept (Fe,Cr)23C6 strengthened ferritic steel are straight without accumulation, significantly bending. The dislocations bend and entangle, forming dislocation walls in the crept Fe2Nb-strengthened ferritic steel. The orientation relationships between (Fe,Cr)23C6/Fe2Nb and ferrite matrix are [001]α-Fe//[011](Fe,Cr)23C6, (020)α-Fe//(71[[EQUATION]])(***)23C6,[001]α-Fe//[5[[EQUATION]]]Fe2Nb,(01[[EQUATION]])α-Fe//(03[[EQUATION]])Fe2Nb. The atomic interface mismatch between M23C6/Fe2Nb and the ferrite matrix is 20% of the semi-coherent interface and 1.6% of the coherent interface. The thermal stability of Fe2Nb is better than (Fe,Cr)23C6. The creep stress exponents of (Fe,Cr)23C6 and Fe2Nb in the ferrite matrix are 4.4 and 12.2, respectively. The alloy’s creep deformation follows dislocation climbing over the second phase. Second-phase Fe2Nb strengthening played a more significant role than (Fe,Cr)23C6 in enhancing the ferrite matrix. The results provide a theoretical foundation for developing ferritic heat-resistant steel based on Laves (Fe2Nb) phase strengthening. © 2023, The Authors. All rights reserved.

关键词： Creep

来源：评论

学校读者我要写书评

暂无评论

Numerical Investigation into the Transient Behavior of the Spike-Type Rotating Stall for a Transonic Compressor Rotor

引用

Fluid Dynamics & Materials Processing 2022年第3期18卷 761-773页

作者： Pengfei Ju Fangfei Ning Zhiting Tong Jingying Wang Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical EngineeringTianjin University of TechnologyTianjin300384China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education(Tianjin University of Technology) Tianjin300384China Research Institute of Aero-Engine Beihang UniversityBeijing100191China National Key Laboratory of Science and Technology on Aero-Engine Aero-Thermodynamics School of Energy and Power EngineeringBeihang UniversityBeijing100191China School of Energy and Power Engineering Shandong UniversityJinan250061China Shandong Engineering Laboratory for High-Efficiency Energy Conservation and Energy Storage Technology&Equipment Shandong UniversityJinan250061China

In this paper,a numerical investigation into a spike-type rotating stall process is carried out considering a transonic compressor rotor(the NASA Rotor 37).Through solution of the Unsteady Reynolds-Averaged Navier-Stokes(URANS)equations,the evolution process from an initially circumferentially-symmetric near-stall flow field to a stable stall condition is simulated without adding any artificial *** the near-stall operating point,periodic fluctuations are present in the overall flow of the ***,the blockage region in the channel periodically shifts from middle span to the *** fluctuating condition does not directly lead to stall,while the full-annulus calculation eventually evolves to ***,a kind of“early disturbance”feature appears in the dynamic signals,which propagates forward ahead of the rotor.

关键词： Transonic compressor spike stall numerical simulation early disturbance dynamic signal

来源：评论

学校读者我要写书评

暂无评论

Pseudo-LiDAR for Visual Odometry

arXiv

引用

arXiv 2022年

作者： Deng, Huiying Wang, Guangming Feng, Zhiheng Jiang, Chaokang Wu, Xinrui Miao, Yanzi Wang, Hesheng Advanced Robotics Research Center AI Research Institute School of Information and Control Engineering China University of Mining and Technology Xuzhou221116 China Department of Automation Key Laboratory of System Control and Information Processing of Ministry of Education Key Laboratory of Marine Intelligent Equipment and System of Ministry of Education Shanghai Engineering Research Center of Intelligent Control and Management Shanghai Jiao Tong University Shanghai200240 China

As one of the important tasks in the field of robotics and machine vision, LiDAR/visual odometry provides tremendous help for various applications such as navigation, location, etc. In the existing methods, LiDAR odometry shows superior performance, but visual odometry is still widely used for its price advantage. Conventionally, the task of visual odometry mainly rely on the input of continuous images. However, it is very complicated for the odometry network to learn the epipolar geometry information provided by the images. In this paper, the concept of pseudo-LiDAR is introduced into the odometry to solve this problem. The pseudo-LiDAR point cloud back-projects the depth map generated by the image into the 3D point cloud, which changes the way of image representation. Compared with the stereo images, the pseudo-LiDAR point cloud generated by the stereo matching network can get the explicit 3D coordinates. Since the 6 Degrees of Freedom (DoF) pose transformation occurs in 3D space, the 3D structure information provided by the pseudo-LiDAR point cloud is more direct than the image. Compared with sparse LiDAR, the pseudo-LiDAR has a denser point cloud. In order to make full use of the rich point cloud information provided by the pseudo-LiDAR, a projection-aware dense odometry pipeline is adopted. Most previous LiDAR-based algorithms sampled 8192 points from the point cloud as input to the odometry network. The projection-aware dense odometry pipeline takes all the pseudo-LiDAR point clouds generated from the images except for the error points as the input to the network. While making full use of the 3D geometric information in the images, the semantic information in the images is also used in the odometry task. The fusion of 2D-3D is achieved in an image-only based odometry. Experiments on the KITTI dataset prove the effectiveness of our method. To the best of our knowledge, this is the first visual odometry method using pseudo-LiDAR. Copyright © 2022, The Authors. A

关键词： Pipelines

来源：评论

学校读者我要写书评

暂无评论

On-chip ultra-compact hexagonal boron nitride topological ring-resonator in visible region

arXiv

引用

arXiv 2022年

作者： Wu, Min Yang, Yibiao Fei, Hongming Lin, Han Zhao, Xiaodan Kang, Lijuan College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan030024 China Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China Centre for Translational Atomaterials Faculty of Science Engineering and Technology Swinburne University of Technology HawthornVIC3122 Australia

Ultra-compact topological ring-resonators with chirality are important devices for quantum optics. However, there are limited demonstrations of chiral resonators, especially in the visible region. We proposed a topological photonic ring-resonator based on hexagonal boron nitride (hBN) valley photonic crystal (VPC). The spin-valley locking effect in VPC allows achieving robust unidirectional transmission of edge states in the visible region (600 nm-650 nm). As a result, a high quality factor (679.3) with a free spectral range of 15.2 nm in the visible region can be achieved in a hBN all-pass filter with a compact size (2.1 μm∗1.8 μm). In addition, we investigated the transmission properties of hBN ring-resonators with different shapes and combinations, confirming the flexibility of designing topological ring-resonators based on this principle. This design can be readily integrated with quantum photonic chips for broad applications. Copyright © 2022, The Authors. All rights reserved.

关键词： Photonic crystals

来源：评论

学校读者我要写书评

暂无评论

High-performance chiral all-optical logic gate based on topological edge states of valley photonic crystal

arXiv

引用

arXiv 2022年

作者： Wang, Xiaorong Fei, Hongming Lin, Han Wu, Min Kang, Lijuan Zhang, Mingda Liu, Xin Yang, Yibiao Xiao, Liantuan College of Physics Taiyuan University of Technology Taiyuan030024 China Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China School of Science RMIT University MelbourneVIC3000 Australia Swinburne University of Technology HawthornVIC3122 Australia

For all-optical communication and information processing, it is necessary to develop all-optical logic gates based on photonic structures that can directly perform logic operations. All-optical logic gates have been demonstrated based on conventional waveguides and interferometry, as well as photonic crystal structures. Nonetheless, any defects in those structures will introduce high scattering loss, which compromises the fidelity and contrast ratio of the information process. Based on the spin-valley locking effect that can achieve defect-immune unidirectional transmission of topological edge states in valley photonic crystals (VPCs), we propose a high-performance all-optical logic OR gate based on a VPC structure. By tuning the working bandwidth of the two input channels, we prevent interference between the two channels to achieve a stable and high-fidelity output. The transmittance of both channels is higher than 0.8, and a high contrast ratio of 28.8 dB is achieved. Moreover, the chirality of the logic gate originated from the spin-valley locking effect allows using different circularly polarized light as inputs, representing "1" or "0", which is highly desired in quantum computing. The device's footprint is 18 × 12 μm 2, allowing high-density on-chip integration. In addition, this design can be experimentally fabricated using current nanofabrication techniques and will have potential applications in optical communication, information processing, and quantum computing. Copyright © 2022, The Authors. All rights reserved.

关键词： Logic gates

来源：评论

学校读者我要写书评

暂无评论

Study on Sensitization Mechanism of Novel Magnetorheological Composite Pdms Thin Film Based on Enhanced Magneto-Mechanical Effect

SSRN

引用

SSRN 2023年

作者： Sang, Shengbo Tan, Qiuyun Jiang, Jiaolin Wu, Kaile Xiao, Pengli Zhao, Dong Guo, Xing Yang, Zhuoqing Dong, Xiushan Ge, Yang Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception College of Information and Computer Taiyuan University of Technology Taiyuan030024 China Key Lab of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China Shanghai200240 China Shanxi Academy of Medical Sciences China Shanxi Research Institute of 6D Artificial Intelligence Biomedical Science Taiyuan030024 China

High sensitivity is key to expand the range of bio-detection, especially in realizing biological detection on single molecular level. Herein, we introduce a novel magnetorheological membrane with enhanced magneto-mechanical effect into the biosensor. Specifically, we made the magnetorheological composite PDMS film (MREF) strengthened by magnetostrictive particles (MSP), and the anisotropic TbDyFe-PDMS can be magnetically deformed to 90 °with 5.8 emu/g, which possesses an initial tensile modulus 55% higher than isotropic. In particular, the modified MR effect equations were proposed considering magnetic dipole interaction and nonlinear magnetostrictive pre-strain of MSP. Such formulae indicate that the enhanced MR effect of MSP-MREF is greatly determined by Ms, remanence, and the flux linkage-like structure. In addition, finite element simulations were carried out to validate and complementarily demonstrate the nonlinear magneto-mechanical behaviors of MSP-MREF theoretically. Finally, the biosensor based on MSP-MREF was fabricated to detect the low concentrations of human serum albumin (HSA), and its sensitivity is around 4 times that of the conventional biosensor. Furthermore, it exhibits high reliability in detecting HSA in real human urine samples, making it the ideal candidate as a practical and effective way for the detection of biomolecules at low concentrations in the future. © 2023, The Authors. All rights reserved.

关键词： Finite element method

来源：评论

学校读者我要写书评

暂无评论

Design of an Embedded Leg Capsule Robot

Design of an Embedded Leg Capsule Robot

引用

IEEE International Conference on Mechatronics and Automation

作者： Yihui Wang Tao Xue Jing Wang Yimuranjiang Yueliwasi Tianjin Key Laboratory for Advanced Electromechanical System Design and Intelligent Control Tianjin University of Technology 391 Binshui Xidao Tianjin China National Demonstration Center for Experimental Mechanical and Electrical Engineering Education Tianjin University of Technology 391 Binshui Xidao Tianjin China

The capsule robot enters the patient’s intestinal system directly by swallowing and takes continuous images using the miniature camera unit it carries, but during its travel, its own gravity and the peristaltic movement of the intestine make the physician limited in obtaining images of the intestine and making a diagnosis. In order to solve this problem, a capsule endoscope with an embedded leg mechanism is proposed. Compared to commercially available capsule robot. This capsule robot can easily move through the intestine autonomously by means of the relationship between the leg, the screw nut and the linkage, enabling forward, backward and stationary functions. The capsule robot has a diameter of 14 mm, a length of 30 mm and a maximum diameter of 26.66 mm with the legs spread out. The hollow space is allocated to include basic endoscopic components such as a miniature camera and a rotating motor. A series of tests, including in vitro tests, were carried out to test the feasibility of the leg mechanism of this capsule robot. Based on the results of the experiments, the proposed leg mechanism can effectively act on the Micro-capsule endoscope, and is able to move effectively through the intestine.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Research on Computer Network Technology system Based on Artificial Intelligence Technology 7

Research on Computer Network Technology System Based on Arti...

引用

2020 7th International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation, CDMMS 2020

作者： Yao, Jinling Liu, Jie College of Electronic Information and Engineering Tianjin Vocational Institute Tianjin300000 China Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control School of Mechanical Engineering Tianjin University of Technology Tianjin300384 China Tianjin300384 China

This article introduces computer network intrusion detection systems and their classification based on artificial intelligence technology, and points out the challenges that intrusion detection systems (IDS) are facing in wireless sensor computer networks. On this basis, a hierarchical multi-layer wireless sensor network intrusion detection system and technology based on artificial intelligence technology Agent is proposed, and its network structure, working principle and performance are analysed. © Published under licence by IOP Publishing Ltd.

关键词： Intrusion detection

来源：评论

学校读者我要写书评

暂无评论

A Weighting Factors Autotuning Strategy for Model Predictive Torque control of Permanent Magnet Synchronous Motor Based on Adaptive Multi-Objective Black Hole Algorithm

A Weighting Factors Autotuning Strategy for Model Predictive...

引用

Chinese control Conference (CCC)

作者： Zixiang Zhou Tao Wu School of Automation China University of Geosciences Wuhan P. R. China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan P. R. China System Integration and Industrial Robotics Laboratory Wuhan P. R. China

The rational design of weighting factors in the cost function for finite control set model predictive torque control (FCS-MPTC) has been a matter of great interest in power electronics and electrical drives. In order to solve this problem, a weighting factors autotuning strategy for FCS-MPTC of permanent magnet synchronous motor (PMSM) based on the adaptive multi-objective black hole algorithm (AMOBH) is proposed. In this paper, the design process of the FCS-MPTC algorithm is first analyzed in detail. Then, an AMOBH algorithm that can take into account both population convergence and population diversity is introduced, and based on this algorithm, the design problem of the weighting factors is successfully transformed into a multi-objective optimization problem by means of reconstructing the cost function and designing the motor operation information collected in real time as the objective functions of the multi-objective optimization algorithm. Simulation results show that the proposed method can find a set of weighting factor combinations suitable for different working condition requirements, and these weighting factors can effectively improve the operation performance of the PMSM system.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Design of wavelength division multiplexing devices based on tunable edge states of valley photonic crystals

arXiv

引用

arXiv 2022年

作者： Han, YuHui Fei, HongMing Lin, Han Zhang, MingDa Liu, Xin Wang, XiaoRong Cao, BinZhao Yang, YiBiao Xiao, LianTuan Department of Physics and Optoelectronics Taiyuan University of Technology Taiyuan030024 China Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China Centre for Translational Atomaterials Faculty of Science Engineering and Technology Swinburne University of Technology HawthornVIC3122 Australia

Wavelength division multiplexing (WDM) devices are key elements of Photonic integrated circuits (PICs). Conventional WDM devices based on silicon waveguides and photonic crystals have limited transmittance due to high loss introduced by the strong backward scattering from defects. In addition, it is challenging to reduce the footprint of those devices. Here we theoretically demonstrate a WDM device in the telecommunication range based on all-dielectric silicon topological valley photonic crystal (VPC) structures. We tune its effective refractive index by tuning the physical parameters of the lattice in the silicon substrate, which can continuously tune the working wavelength range of the topological edge states, which allows designing WDM devices with different channels. The WDM device has two channels (1470 nm-1523 nm and 1548 nm-1609 nm), with contrast ratios of 22.4 dB and 24.9 dB, respectively. The principle of manipulating the working bandwidth of the topological edge states can be generally applied in designing different integratable photonic devices, thus it will find broad applications. Copyright © 2022, The Authors. All rights reserved.

关键词： Photonic devices

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：