检索结果-内蒙古大学图书馆

16th International Conference on Optical Communications and Networks, ICOCN 2017

作者： Li, Jian Zhang, Mingjiang Zhang, Jianzhong Liu, Yi Key Lab of Advanced Transducers and Intelligent Control System Ministry of Education AndShanxi Province Taiyuan University of Technology Taiyuan030024 China Institute of Optoelectronic Engineering College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan030024 China

ISBN: (纸本)9781538632734

A temperature demodulation method by using compensation of fiber attenuation and dispersion for distributed temperature sensors (DTS) is proposed and demonstrated in order to improve the DTS measuring speed and accuracy. Firstly, the attenuation coefficients difference between anti-Stokes and Stokes backscattering is modified, which avoids the calibration processing on the entire sensing optical fiber and reduces system operation time. Secondly, dispersion shift algorithm is applied to correct the position of Stokes backscattering, and then the intensity of Stokes backscattering can be obtained at the same position with anti-Stokes backscattering, which eliminates the influence of optical fiber dispersion on temperature demodulation and improves the accuracy of temperature measurement. © 2017 IEEE.

关键词： Backscattering

来源：评论

学校读者我要写书评

暂无评论

Bifurcation analysis and control of quorum sensing network model 5

Bifurcation analysis and control of quorum sensing network m...

引用

5th International Workshop on advanced Computational Intelligence and intelligent Informatics, IWACIII 2017

作者： Mei, Qicheng Liu, Feng Ren, Jie Sun, Fenglan Wang, Hua School of Automation China University of Geosciences Wuhan430074 China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex Systems Wuhan430074 China Research Center of System Theory and Application Chongqing University of Posts and Telecommunications Chongqing400065 China Department of Mechanical Engineering Boston University BostonMA02215 United States

In this paper, a model is constructed to investigate the mechanism induced quorum sensing (QS) by coexisting of small RNA and signal molecule. The QS network model regulated by small RNAs is studied. The condition of the stability of the QS network is considered by using Routh-Hurwitz stability criterion. The conditions for the existence of Hopf bifurcation are obtained. Then, a linear feedback control is designed to make the system asymptotically stable. The numerical simulation is used to verify the results of theoretical analysis.

关键词： Hopf bifurcation

来源：评论

学校读者我要写书评

暂无评论

Gas adsorption and accumulation on hydrophobic surfaces:Molecular dynamics simulations

引用

Chinese Physics B 2015年第9期24卷 392-398页

作者：骆庆群杨洁明 Taiyuan University of Technology Key Laboratory Advanced Transducers and Intelligent Control System of Ministry of Education

Molecular dynamics simulations show that the gas dissolved in water can be adsorbed at a hydrophobic interface and accumulates thereon. Initially, a water depletion layer appears on the hydrophobic interface. Gas molecules then enter the depletion layer and form a high-density gas-enriched layer. Finally, the gas-enriched layer accumulates to form a nanobubble. The radian of the nanobubble increases with time until equilibrium is reached. The equilibrium state arises through a Brenner–Lohse dynamic equilibrium mechanism, whereby the diffusive outflux is compensated by an influx near the contact line. Additionally, supersaturated gas also accumulates unsteadily in bulk water, since it can diffuse back into the water and is gradually adsorbed by a solid substrate.

关键词： hydrophobic molecular dynamics nanobubble

来源：评论

学校读者我要写书评

暂无评论

Identification of mining steel rope broken wires based on improved EEMD

引用

International Journal of Mining and Mineral Engineering 2016年第3期7卷 224-236页

作者： Qiao, Tie-Zhu Li, Zhao-Xing Jin, Bao-Quan Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education Taiyuan University of Technology Taiyuan030024 China

Metal magnetic memory (3M), which is used to evaluate the stress concentration and fatigue damage of ferromagnetic materials, belongs to a weak magnetic detection. When 3M technology is used to detect working steel rope, the detected signal contains lots of interfering signals to distort real signal. To improve signal to noise ratio (SNR), ensemble empirical mode decomposition (EEMD) is used to denoise the original signal. A new method of confirming white noise standard deviation (WNSD) added to EEMD has been proposed, which has a higher accuracy. Besides, a self-adaptive method of selecting intrinsic mode functions (IMFs) has been proposed. The method is used to denoise magnetic memory signal of steel rope metal and the result is better than other common denoising methods. After denoising the tested signal of steel rope, the broken wires field of the rope can be recognised by the normal component of 3M crossing zero point. © 2016 Inderscience Enterprises Ltd.

关键词： Empirical mode decomposition

来源：评论

学校读者我要写书评

暂无评论

Electric field effect in ultrathin zigzag graphene nanoribbons

引用

Chinese Physics B 2015年第7期24卷 356-359页

作者：张文星刘云霄田华许军伟冯琳 Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of EducationPhysics DepartmentTaiyuan University of Technology

The electric field effect in ultrathin zigzag graphene nanoribbons containing only three or four zigzag carbon chains is studied by first-principles calculations, and the change of conducting mechanism is observed with increasing in-plane electric field perpendicular to the ribbon. Wider zigzag graphene nanoribbons have been predicted to be spin-splitted for both valence band maximum（VBM） and conduction band minimum（CBM） with an applied electric field and become half-metal due to the vanishing band gap of one spin with increasing applied field. The change of VBM for the ultrathin zigzag graphene nanoribbons is similar to that for the wider ones when an electric field is applied. However, in the ultrathin zigzag graphene nanoribbons, there are two kinds of CBMs, one is spin-degenerate and the other is spin-splitted, and both are tunable by the electric field. Moreover, the two CBMs are spatially separated in momentum space. The conducting mechanism changes from spin-degenerate CBM to spin-splitted CBM with increasing applied electric field. Our results are confirmed by density functional calculations with both LDA and GGA functionals, in which the LDA always underestimates the band gap while the GGA normally produces a bigger band gap than the LDA.

关键词： electric field density functional theory zigzag nanoribbon

来源：评论

学校读者我要写书评

暂无评论

Distributed sensor diagnosis for wire fault of complex topology wired networks based on chaos-TDR

Distributed sensor diagnosis for wire fault of complex topol...

引用

Progress in Electromagnetic Research Symposium (PIERS)

作者： Bingjie Wang Hang Xu Yuncai Wang Guanghui Wu Li Liu Key Laboratory of Advanced Transducers and Intelligent Control System Ministry of Education and Shanxi Province Taiyuan 030024 China

ISBN: (纸本)9781509060948

The growing need for wiring in avionics, automotive, telecommunications, nuclear plants, buildings, etc., has caused the increase of the complexity of wired networks. This also leads to the increase of the difficulty of their maintenance that becomes not only problematic but also expensive. The need of embedded diagnosis to perform continuous monitoring was identified. Although reflectometry is an efficient method to diagnose simple topologies, it remains limited in the case of complex branched networks due to multipath fading of the test signal during its propagation. In practice, a distributed diagnosis strategry is necessary when multiple reflectometers (referred as diagnosis sensors) at several points of a complex network at the same time, thus allowing to solve ambiguities due to the existence of multiple paths and to guarantee a reliable and continuous diagnosis in complex wiring system. In this paper, the use of chaotic signals for distributed diagnosis and the detection of defects in the complex wiring network is presented experimentally. Chaos time-domain reflectometry (chaos-TDR) using low auto-correlation sidelobes signals, shows high performances in very noisy environment and is a suitable candidate for on-line diagnosis. Low cross-correlation chaotic signals enable several reflectometers (sensors) to simultaneously inject their signals in the cables, without any interference. Experimental results show that the proposed method performs well in a branched wiring network as it permits to detect and locate faults accurately even when the target system is operating. Also, the inference of wired network topology is realized by using sensor measurements at multiple cable ends.

关键词： Wiring Network topology Topology Electromagnetics Wires transducers intelligent control

来源：评论

学校读者我要写书评

暂无评论

Load Curve Modeling Based on Behavior Analysis of Distributed Power Customers

引用

IOP Conference Series: Materials Science and Engineering 2019年第1期486卷

作者： Xinyang Han Yu Zhang Yuqiao Jiao Yue Zhang Yanjing Qu Min Ding State Grid Energy Research Institute Beijing 102200 P. R. China 027-8883018 School of Automation China University of Geosciences Wuhan 430074 P. R. China Hubei Key Laboratory of Advanced Control and Intelligent Automation for Complex System Wuhan 430074 P. R. China State Grid Shanghai Municipal Electric Power Company Shanghai 200122 P. R. China

As renewable power generation directly affects the customers' traditional electricity behavior and then offsets the power load, this paper proposes a load curve modeling method for renewable power customers based on the behavior analysis. Firstly, customers' active behavior is represented by the quantity of active customer households. Based on the analysis of customer behaviors, a modeling method for the quantity of active customer households is proposed based on Markov Chain Monte Carlo method. Then, with the inputs as the quantity of active customer households and time of photovoltaic power generation, an inference model based on fuzzy logic is proposed to get the quantity of customer household starting electrical appliances. By combing the average usage time of electrical appliances, load characteristics are analyzed based on usage state of electrical appliance of distributed power customers. Finally, the simulation results verify the effectiveness of the proposed method.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Pickup Manipulator Design and Its Kinematics Simulation

引用

IOP Conference Series: Earth and Environmental Science 2018年第4期170卷

作者： Zhongdang Zhang Zhaoqiang Zhang Shitai Ma Haibo Zhou Tianjin University of Technology Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control Tianjin 300384 China National Demonstration Center for Experimental Mechanical and electrical Engineering Education (Tianjin University of Technology) Tianjin 300384 China

In order to improve the flexibility of the pickup manipulator and solve the problem of picking up small sports balls in training ground such as golfing, tennis, and table tennis, a 5-DOF pickup manipulator structure is designed. According to the pickup task requirements of the manipulator, through theoretical calculations, the 86HS series stepping motor is selected as the driving motors of the front end joints. Based on this, the stepping motor control system is designed to realize the closed-loop control of the manipulator. Then the manipulator model is built using D-H method, the inverse kinematics solution is calculated, and the analysis of kinematic theory is conducted. Finally, the targeted pickup point is selected to carry out case simulation analysis of the manipulator, the motion law of the manipulator is verified to be reasonable and the task of picking up small sports balls is completed.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Supported black phosphorus nanosheets as hydrogen-evolving photocatalyst achieving 5.4% energy conversion efficiency at 353 K

引用

Nature communications 2018年第1期9卷 1397页

作者： Bin Tian Bining Tian Bethany Smith M C Scott Ruinian Hua Qin Lei Yue Tian Key Lab of Advanced Transducers and Intelligent Control System of Ministry of Education College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan 030024 China. Department of Materials Science and Engineering University of California Berkeley Berkeley CA 94720 USA. Molecular Foundry Lawrence Berkeley National Lab Berkeley CA 94720 USA. College of Life science Dalian Nationalities University Dalian 116600 China. Key Lab of Advanced Transducers and Intelligent Control System of Ministry of Education College of Physics and Optoelectronics Taiyuan University of Technology Taiyuan 030024 China. tianyue@***. Molecular Foundry Lawrence Berkeley National Lab Berkeley CA 94720 USA. tianyue@***.

Solar-driven water splitting using powdered catalysts is considered as the most economical means for hydrogen generation. However, four-electron-driven oxidation half-reaction showing slow kinetics, accompanying with insufficient light absorption and rapid carrier combination in photocatalysts leads to low solar-to-hydrogen energy conversion efficiency. Here, we report amorphous cobalt phosphide (Co-P)-supported black phosphorus nanosheets employed as photocatalysts can simultaneously address these issues. The nanosheets exhibit robust hydrogen evolution from pure water (pH = 6.8) without bias and hole scavengers, achieving an apparent quantum efficiency of 42.55% at 430 nm and energy conversion efficiency of over 5.4% at 353 K. This photocatalytic activity is attributed to extremely efficient utilization of solar energy (~75% of solar energy) by black phosphorus nanosheets and high-carrier separation efficiency by amorphous Co-P. The hybrid material design realizes efficient solar-to-chemical energy conversion in suspension, demonstrating the potential of black phosphorus-based materials as catalysts for solar hydrogen production.

关键词：

来源：评论

学校读者我要写书评

暂无评论

Remote Monitoring system for Machinery-electric-hydraulic Coupling Vibration of Food Processing Rolling Mill Screw-down system

引用

Advance Journal of Food Science and Technology 2016年第5期10卷 360-364页

作者： Xin Liu Baoquan Jin Hongjuan Zhang Xuefeng Bai Key Lab of Advanced Transducers and Intelligent Control System Taiyuan University of Technology Ministry of Education and Shanxi Province Taiyuan 030024 China

Machinery-electric-hydraulic coupling vibration seriously affects the control accuracy of the food processing rolling mill. In this study, a remote vibration sensor monitoring method based on network technology is put forward. By using Siemens PLC, the state monitoring device is designed to realize the parameters measurement, such as vibration, current, pressure, force and temperature, etc. Then the parameter information is transferred to the configuration software system through the ethernet interface. The research result shows that the network-based remote sensor monitoring system of machinery-electric-hydraulic coupling vibration plays a key role in ensuring the normal work for food processing rolling mill screw-down system.

关键词： Configuration software food processing rolling mill machinery-electric-hydraulic coupling sensor monitoring decoupling the vibration Outcomes Research FOOD PROCESSING control accuracy remote monitoring system parametric tests Rolling mills Networking Techniques vibration sensor

来源：评论

学校读者我要写书评

暂无评论

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案：

请选择收藏分类：

通借通还

建议与咨询 留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

时间限定

文献类型

馆藏选择

核心期刊

语言

文献类型

帮助

文字说明：

检索规则说明：

检索范例：

分类表

所选分类

限定检索结果

文献类型

馆藏范围

日期分布

学科分类号

主题

机构

作者

语言

请选择保存的检索档案： 新增检索档案 确定 取消

请选择收藏分类： 新增自定义分类 确定 取消

通借通还

建议与咨询留下您的常用邮箱和电话号码，以便我们向您反馈解决方案和替代方法

请选择保存的检索档案：

请选择收藏分类：